首页 | 官方网站   微博 | 高级检索  
     

高速铁路牵引供电系统负荷过程仿真技术的研究
引用本文:张彦伟,郎兵,李应,刘苹,施东和,赵隽.高速铁路牵引供电系统负荷过程仿真技术的研究[J].铁路计算机应用,2018,27(3):5-6.
作者姓名:张彦伟  郎兵  李应  刘苹  施东和  赵隽
作者单位:1.北京交通大学 电气工程学院,北京 100044;
基金项目:中国铁路昆明局集团有限公司科技研究开发计划项目(K16J03)
摘    要:高速铁路牵引供电系统负荷过程仿真主要包括动车组运行的牵引负荷功率计算和牵引供电系统的潮流计算。通过建立牵引计算模型得到动车组运行过程中的电气负荷特性,基于多导体传输线模型,建立牵引网等值电路,基于牵引变电所端口电气量通用变换关系,建立牵引变电所等值电路,基于牵引负荷功率进行牵引供电系统潮流计算,可以得到动车组运行过程中牵引供电系统的电压和电流的变化。以此为基础,编制了高速铁路牵引供电系统负荷过程仿真程序,通过仿真程序对云南省开通的首条高速铁路—长昆客运专线邓家山牵引供电系统进行了仿真计算,计算结果与中国铁道科学研究院的实地测试结果相一致。高速铁路牵引供电系统负荷过程仿真技术的研究对于深入研究高铁牵引供电系统的运行规律,对供电系统中各种供电指标的核查、校验等具有重要意义。

关 键 词:高速铁路    牵引供电系统    模型    仿真计算
收稿时间:2017-09-11

Load process simulation of traction power supply system of high-speed railway
Affiliation:1.School of Electrical Engineering, Beijing Jiaotong University, Beijing 100044, China;2.Kunming Power Supply Section, China Railway Kunming Group Co. Ltd., Kunming 650100, China
Abstract:The load process simulation of traction power supply system of high-speed railway mainly includes traction load power calculation during the EMU running and power flow calculation of traction power supply system. A traction calculation model was established to obtain the electrical load characteristics during the EMU running. Based on the multi-conductor transmission line model, an equivalent circuit of traction network was established, and based on the general transformation relation of the electric quantities of traction substation, the equivalent circuit of traction substation was established. Based on the traction load power, power flow calculation of traction power supply system could be carried out, the change of voltage and current of traction power supply system could be obtained. On this basis, a load process simulation program of high-speed railway traction power supply system was compiled, and the simulation program was used to simulate the traction power supply system of Dengjiashan of the Changsha—Kunming Passenger Line which was the first high-speed railway in Yunnan Province. The simulation results were consistent with the actual test results which were made by China Academy of Railway Sciences. The load process simulation of traction power supply system of high-speed railway is of great significance to study the operation rules of traction power supply system of high-speed railway, check and verify the various power supply indexes in the power supply system.
Keywords:
点击此处可从《铁路计算机应用》浏览原始摘要信息
点击此处可从《铁路计算机应用》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号