| 城市轨道交通钢轨磨耗和裂纹萌生分析与选型建议 |
| |
| 引用本文： | 周宇,木东升,邝迪峰,郑晓峰,韩延彬.城市轨道交通钢轨磨耗和裂纹萌生分析与选型建议[J].交通运输工程学报,2018,18(4):82-89. |
| |
| 作者姓名： | 周宇 木东升 邝迪峰 郑晓峰 韩延彬 |
| |
| 作者单位： | 同济大学 道路与交通工程教育部重点实验室, 上海 201804 |
| |
| 基金项目： | 国家自然科学基金项目51678445道路与铁道工程安全保障省部共建教育部重点实验室开放课题STKF201715 |
| |
| 摘 要： | 分析了基于能量密度法和临界平面法的滚动接触疲劳裂纹萌生预测理论与Archard法的磨耗预测理论, 提出了城市轨道交通钢轨滚动接触疲劳裂纹萌生和磨耗共存发展预测模型; 针对城市轨道交通常用的U71Mn热轧、U75V热轧和U75V热处理等3种不同硬度的钢轨, 预测其表面滚动接触疲劳裂纹的萌生寿命、相应的钢轨型面变化和磨耗发展率; 分析了3种硬度钢轨的疲劳裂纹萌生和磨耗发展特征; 基于安定极限理论, 结合城市轨道交通常见坡度和常用ER9型车轮, 从轮轨硬度匹配的角度提出了城市轨道交通的钢轨选型建议。研究结果表明: 随着硬度的增大, 钢轨滚动接触疲劳裂纹萌生寿命延长, 磨耗发展率降低, U75V热轧和U75V热处理钢轨的磨耗发展率分别比U71Mn热轧钢轨低3.2%和12.1%, 裂纹萌生寿命分别比U71Mn延长14.8%和31.1%;在城市轨道交通常用坡度情况下, 3种不同硬度的钢轨材料都处于弹性安定极限范围, 但随着坡度增大, 钢轨材料趋向于塑性安定极限; 考虑与ER9车轮的硬度匹配情况, 建议钢轨踏面较车轮踏面的硬度高些, ER9车轮与U75V热轧钢轨和U75V热处理钢轨的轮轨硬度比分别为0.87~1.04和0.71~0.84, 这2种钢轨均适合于中国的城市轨道交通系统。
|
| 关 键 词： | 城市轨道交通 钢轨 滚动接触疲劳 磨耗 轮轨硬度匹配 |
| 收稿时间： | 2018-01-26 |
Analysis on rail wear and crack initiation and recommendation on rail selection in urban rail transit |
| |
| ZHOU Yu,MU Dong-sheng,KUANG Di-feng,ZHENG Xiao-feng,HAN Yan-bin.Analysis on rail wear and crack initiation and recommendation on rail selection in urban rail transit[J].Journal of Traffic and Transportation Engineering,2018,18(4):82-89. |
| |
| Authors: | ZHOU Yu MU Dong-sheng KUANG Di-feng ZHENG Xiao-feng HAN Yan-bin |
| |
| Affiliation: | Key Laboratory of Road and Traffic Engineering of Ministry of Education, Tongji University, Shanghai 201804, China |
| |
| Abstract: | The theory of rolling contact fatigue (RCF) crack prediction based on the energy density method and critical plane method, and wear prediction theory based on the Archard method were analyzed, aprediction model of the coexistence of RCF crack initiation and wear growth in rails of urban rail transit (URT) was presented. The RCF crack initiation life, corresponding rail profile evolution and wear growth rate were predicted for three kinds of the rails with different hardnesses, named U71 Mn as-rolled, U75 Vas-rolled, and U75 Vheat-treated rails that were commonly used in URT. The development characteristics of the fatigue crack initiation and wear growth were analyzed. Based on the shakedown limit theory, according to the common gradients and type ER9 wheel, the rail selection suggestion for URT was proposed considering the hardness match between the wheel and rail. Analysis result shows that the RCFcrack initiation lifes of the rails prolong and the wear growth rates reduce with the increase of the rail hardness. Compared with those of U71 Mn as-rolled rail, the wear growth rates of the U75 V as-rolled and heat-treated rails reduce by 3.2% and 12.1%, respectively, and their crack initiation lifes prolong by 14.8% and 31.1% respectively. The materials of three kinds of rails with different hardnesses are all within the elastic shakedown limit under the common gradients condition in URT, but they will tend to the plastic shakedown limit with the increase of the gradient. Given the hardness match of the ER9 wheel, it is recommended that the hardness of the rail surface should be higher than that of the wheel tread. The wheel-rail hardness ratios are 0.87-1.04 for U75 Vas-rolled rail and ER9 wheel, and 0.71-0.84 for U75 Vheat-treated rail and ER9 wheel, respectively. Both U75 Vrails can be adapted to the URT system in China. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《交通运输工程学报》浏览原始摘要信息 |
|
点击此处可从《交通运输工程学报》下载全文 |
|
