Total requirements of energy and greenhouse gases for Australian transport

In addition to fuels, passenger and freight transport require vehicles and infrastructure. As with fuels, the provision of goods and services that are needed for the operation of transport involves the consumption of energy and the emission of greenhouse gases. The energy consumed and greenhouse gases emitted due to fuel use by vehicles are referred to as direct requirements, while indirect requirements of energy and greenhouse gases are embodied in the goods and services mentioned before. Indirect requirements form a significant part of the total energy and greenhouse gases required for a given transport task. They depend on the transport mode, ranging from 10% to 50% for freight transport and from 25% to 65% for passenger transport. These indirect requirements have to be taken into account when options for reducing the energy consumption and greenhouse gas emissions of the transport sector are to be evaluated.     

The viability of pure vegetable oil as an alternative fuel for large ships

Heavy fuels are likely to remain the dominant fuel source for two-stroke, low-speed diesel engines for large ship propulsion for the next decade or more. There is however, potential for increased use of pure vegetable oils (PVO) as an alternative and, by emitting lower levels of several pollutants, this can help the attainment of Annex VI of the MARPOL 73/78 convention aimed at large ships using fuels with less than 4.5% sulphur or 1.5% sulphur in SO_X emission control areas The use of alternative fuels can also influence the attainment of the Kyoto protocol that requires greenhouse gas emissions to be reduced by 5% by 2010 compared to 1990. This paper analyses the physical and chemical properties of various pure vegetable oils as an alternative to heavy fuel oil for large ship propulsion.     

Well-to-wake energy and greenhouse gas analysis of SOX abatement options for the marine industry

This paper investigates the well-to-wake energy consumption and greenhouse gas emissions of several key SO_X abatement options in marine transportation, ranging from the manufacture of low sulfur fuels to equipping the vessel with suitable scrubber solutions. The findings suggest that a scrubber system, used with current heavy fuel oils, has the potential to reduce SO_X emissions with lower well-to-wake energy consumption and greenhouse gas emissions than switching to production of low sulfur fuels at the refinery. A sensitivity analysis covering a series of system parameters shows that variations in the well-to-tank greenhouse gas emissions intensity and the energy efficiency of the main engine have the highest impacts in terms of well-to-wake emissions.     

An environmental-economic evaluation of hybrid electric vehicles: Toyota's Prius vs. its conventional internal combustion engine Corolla

We compare the second generation of the first commercial hybrid electric vehicle (HEV), the Toyota Prius, to the conventional internal combustion engine (ICE) Toyota Corolla. The more complicated and expensive Prius has lower pollutant and carbon dioxide emissions and better fuel economy than the Corolla. In a world of limited resources and many petroleum users and emissions sources, the policy question is whether the best use of resources is to build hybrids, to improve the fuel economy and environmental emissions of other mobile sources, or to devote the resources to other environmental projects. We find that the Prius is not cost-effective in improving fuel economy or lowering emissions. For the Prius to be attractive to US consumers, the price of gasoline would have to be more than three times greater than at present. To be attractive to regulators, the social value of abating tailpipe emissions would have to be 14 times greater than conventional values. Alternatively, the value of abating greenhouse gas emissions would have to be at least $217/t. There are many opportunities for abating pollutant and greenhouse gas emissions at lower cost. We conclude that hybrids will not have significant sales unless fuel prices rise several-fold or unless regulators mandate them.     

Assessment of hybrid‐drive bus fuel savings for Brazilian urban transit

Buses are the main transit mode in Brazil, transporting more than 55 million passengers per day. Most of these vehicles run on diesel oil causing a dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation, options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This paper proposes a procedure for evaluating the performance of a recently developed hybrid‐drive technology. A simple procedure is presented to compare hybrid‐drive buses with conventional diesel buses in urban operations, particularly with respect to fuel economy. Next the potential for reducing diesel oil consumption through the use of hybrid‐drive buses is assessed. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid‐drive buses would certainly exceed 20%, resulting in lower fuel costs and carbon dioxide (CO₂) emissions.     

Well-to-wheel costs,primary energy demand,and greenhouse gas emissions for the production and operation of conventional and alternative vehicles

This study provides a comprehensive comparison of well-to-wheel (WTW) energy demand, WTW GHG emissions, and costs for conventional ICE and alternative passenger car powertrains, including full electric, hybrid, and fuel cell powertrains. Vehicle production, operation, maintenance, and disposal are considered, along with a range of hydrogen production processes, electricity mixes, ICE fuels, and battery types. Results are determined based on a reference vehicle, powertrain efficiencies, life cycle inventory data, and cost estimations. Powertrain performance is measured against a gasoline ICE vehicle. Energy carrier and battery production are found to be the largest contributors to WTW energy demand, GHG emissions, and costs; however, electric powertrain performance is highly sensitive to battery specific energy. ICE and full hybrid vehicles using alternative fuels to gasoline, and fuel cell vehicles using natural gas hydrogen production pathways, are the only powertrains which demonstrate reductions in all three evaluation categories simultaneously (i.e., WTW energy demand, emissions, and costs). Overall, however, WTW emission reductions depend more on the energy carrier production pathway than on the powertrain; hence, alternative energy carriers to gasoline for an ICE-based fleet (including hybrids) should be emphasized from a policy perspective in the short-term. This will ease the transition towards a low-emission fleet in Switzerland.     

Performance Evaluation of Hybrid-Drive Buses and Potential Fuel Savings in Brazilian Urban Transit

Transporting more than 55 million passengers per day, buses are the main transit mode in Brazil. Most of these vehicles use diesel oil and this situation causes dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation the options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This article proposes a procedure for evaluating the performance of a recently developed Brazilian hybrid-drive technology. A simple procedure is presented to compare hybrid-drive buses with conventional diesel buses in urban operation focusing on fuel economy and the potential for reducing diesel oil consumption through the use of hybrid-drive buses. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid-drive buses would certainly exceed 20%, resulting in lower fuel costs and reduced carbon dioxide (CO₂) emissions.     

Examining the benefits of using bio-CNG in urban bus operations

Public service fleets offer an attractive option for introducing new renewable fuels on a large scale, which allow for the reduction of both greenhouse gas emissions and exhaust air pollutants. This study examines the use of biomethane (bio-CNG) and compressed natural gas for part of the bus fleet in Dublin, Ireland. The emissions produced from the 2008 fleet based at one of the city’s seven bus depots are compared to use of new diesel and bio-CNG buses. The optimum feedstock for bio-CNG production in Ireland was then investigated, as well as the quantity of feedstock needed to produce the required bio-CNG to fuel the bus fleet examined. As expected the results showed a substantial decrease in all exhaust emissions from the use of bio-CNG buses compared the 2008 fleet. Grass silage was chosen as the optimum feedstock for production of bio-CNG in Ireland.     

Greenhouse gas emissions associated with electric vehicle charging: The impact of electricity generation mix in a developing country

Since 2012, the government has been promoting the electric vehicles and the development of related infrastructure to encourage local automakers to explore into the alternatively powered vehicles. However, the benefits of grid-dependent EVs can only be harvested under the condition that their use is coupled with a low carbon electricity grid. Thus, it is an additional challenge for Malaysia's that are largely dependent on fossil fuels for electricity generation. The object of this paper is to perform a well-to-wheel life cycle assessment for calculating the greenhouse gas emissions attributable to the usage of ICEVs, HEVs and EVs in Malaysian scenario. These emission calculations will provide the best information for policymakers, researchers, and investors to make appropriate and effective decisions on policies, research and investments in future transport energy. The results show that running EVs with national grid will produce an average of 7% more GHG emissions than HEVs at the same distance. However, they will produce an average of 19% less GHG emissions than the ICEVs. Overall the GHG emissions produced through the usage of EVs are substantial based on the well-to-wheel analysis, as the environmental profile of EVs is linked with the national grid. Therefore, in order to harvest the benefit of EVs towards climate change and global warming mitigation, massive modernization and transformation should be taken for the development of the national grid towards greener sources.     

Environmental rating of vehicles with different alternative fuels and drive trains: a comparison of two approaches

Two rating systems assessing the environmental damage caused by vehicles are compared: a Brussels one, ECOSCORE and a European one, CLEANER DRIVE. Both vehicle rating systems were developed for the assessment of vehicles with alternative types of fuels as well as different types of drive train, such as electric, hybrid and fuel cell vehicles. A simplified life cycle assessment following a well-to-wheel approach is used to compare the methodologies. Total emissions involve oil extraction, transport and refinery, fuel distribution and electricity generation and distribution as well as tailpipe emissions from the use phase. Different types of pollution such as acid rain, photochemical air pollution, noise pollution and global warming are examined and their impact on numerous receptors such as ecosystems, buildings and human beings (cancer, respiratory diseases, etc.) are investigated. Examples illustrate both methodologies and sensitivity analysis is used to examine the robustness of the systems.     

Exhaust emissions and fuel consumption of a triple-fuel spark-ignition engine powered passenger car

This paper examines the influence of compressed natural gas, liquefied petroleum gas and gasoline fuel on the exhaust emissions and the fuel consumption of a spark-ignition engine powered passenger car. The vehicle was driven according to the urban driving cycle and extra urban driving cycle speed profiles with the warmed-up engine. Cause and effect based analysis reveals potential for using different fuels to reduce vehicle emission and deficiencies associated with particular fuels. The highest tank to wheel efficiency and the lowest CO₂ emission are observed with the natural gas fuelled vehicle, that also featured the highest total hydrocarbon emissions and high NO_x emissions because of fast three way catalytic converter aging due the use of the compressed natural gas. Retrofitted liquefied petroleum gas fuel supply systems feature the greatest air-fuel ratio variations that result in the lowest TtW efficiency and in the highest NO_x emissions of the liquefied gas fuelled vehicle.     

Meeting an 80% reduction in greenhouse gas emissions from transportation by 2050: A case study in California

This paper investigates how California may reduce transportation greenhouse gas emissions 80% below 1990 levels by 2050 (i.e., 80in50). A Kaya framework that decomposes greenhouse gas emissions into the product of population, transport intensity, energy intensity, and carbon intensity is used to analyze emissions and mitigation options. Each transportation subsector, including light-duty, heavy-duty, aviation, rail, marine, agriculture, and off-road vehicles, is analyzed to identify specific mitigation options and understand its potential for reducing greenhouse gas emissions. Scenario analysis shows that, while California’s 2050 target is ambitious, it can be achieved in transport if a concerted effort is made to change travel behavior and the vehicles and fuels that provide mobility. While no individual ‘‘Silver Bullet” strategy exists that can achieve the goals, a portfolio approach that combines strategies could yield success. The 80in50 scenarios show the impacts of advanced vehicle and fuels technologies as well as the role of travel demand reduction, which can significantly reduce energy and resource requirements and the level of technology development needed to meet the target.     

LNG-fuelled fishing vessels: A systems engineering approach

Air emissions from fishing vessels must be reduced to comply with progressively stringent environmental regulations. Among the available solutions, liquefied natural gas (LNG) fuel may represent a promising solution, particularly from an environmental perspective. However, the use of LNG as a marine fuel creates different types of hazards than those that exist for traditional fuels. In addition, the increased complexity, safety requirements, and space required for LNG installation increase the capital cost. This article uses a systems engineering approach to clarify the technical aspects of LNG-fuelled systems, their potential implementation costs, and the expertise and training required to operate them safely. Ship owners can use such an approach to aid decision-making and trade-off analyses. Naval architects may also benefit from better information management. Finally, crews may better understand the logic behind the safety actions they are instructed to take.     

Environmental life-cycle assessment of transit buses with alternative fuel technology

The paper presents a life-cycle assessment of costs and greenhouse gas emissions for transit buses deploying a hybrid input-output model to compare ultra-low sulfur diesel to hybrid diesel-electric, compressed natural gas, and hydrogen fuel-cell. We estimate the costs of emissions reductions from alternative fuel vehicles over the life cycle and examine the sensitivity of the results to changes in fuel prices, passenger demand, and to technological characteristics influencing performance and emissions. We find that the alternative fuel buses reduce operating costs and emissions, but increase life-cycle costs. The infrastructure requirement to deploy and operate alternative fuel buses is critical in the comparison of life-cycle emissions. Additionally, efficient bus choice is sensitive to passenger demand, but only moderately sensitive to technological characteristics, and that the relative efficiency of compressed natural gas buses is more sensitive to changes in fuel prices than that of the other bus types.     

Sulphur abatement globally in maritime shipping

In 2016, the International Maritime Organization (IMO) decided on global regulations to reduce sulphur emissions to air from maritime shipping starting 2020. The regulation implies that ships can continue to use residual fuels with a high sulphur content, such as heavy fuel oil (HFO), if they employ scrubbers to desulphurise the exhaust gases. Alternatively, they can use fuels with less than 0.5% sulphur, such as desulphurised HFO, distillates (diesel) or liquefied natural gas (LNG). The options of lighter fuels and desulphurisation entail costs, including higher energy consumption at refineries, and the present study identifies and compares compliance options as a function of ship type and operational patterns.The results indicate distillates as an attractive option for smaller vessels, while scrubbers will be an attractive option for larger vessels. For all vessels, apart from the largest fuel consumers, residual fuels desulphurised to less than 0.5% sulphur are also a competing abatement option. Moreover, we analyse the interaction between global SO_X reductions and CO₂ (and fuel consumption), and the results indicate that the higher fuel cost for distillates will motivate shippers to lower speeds, which will offset the increased CO₂ emissions at the refineries. Scrubbers, in contrast, will raise speeds and CO₂ emissions.     

Conventional,hybrid and electric vehicles for Australian driving conditions. Part 2: Life cycle CO2-e emissions

This paper is the second of a two part study which quantifies the economic and greenhouse performance of conventional, hybrid and fully electric passenger vehicles operating in Australian driving conditions. This second study focuses on the life cycle greenhouse gas emissions. Two vehicle sizes are considered, Class-B and Class-E, which bracket the large majority of passenger vehicles on Australian roads.Using vehicle simulation models developed in the first study, the trade-offs between the ability of increasingly electric powertrains in curtailing the tailpipe emissions and the corresponding rise in the embedded vehicle emissions have been evaluated. The sensitivity of the life cycle emissions to fuel, electricity and the change in the energy mix are all considered. In conjunction with the total cost of ownership calculated in the companion paper, this allows the cost of mitigating life cycle greenhouse gas emissions through electrification of passenger transport to be estimated under different scenarios. For Class-B vehicles, fully electric vehicles were found to have a higher total cost of ownership and higher life cycle emissions than an equivalent vehicle with an internal combustion engine. For Class-E vehicles, hybrids are found to be the most cost effective whilst also having lowest life cycle emissions under current conditions. Further, hybrid vehicles also exhibit little sensitivity in terms of greenhouse emissions and cost with large changes in system inputs.     

Life cycle model of alternative fuel vehicles: emissions,energy, and cost trade-offs

This paper describes a life cycle model for performing level-playing field comparisons of the emissions, costs, and energy efficiency trade-offs of alternative fuel vehicles (AFV) through the fuel production chain and over a vehicle lifetime. The model is an improvement over previous models because it includes the full life cycle of the fuels and vehicles, free of the distorting effects of taxes or differential incentives. This spreadsheet model permits rapid analyses of scenarios in plots of trade-off curves or efficiency frontiers, for a wide range of alternatives with current and future prices and levels of technology. The model is available on request.The analyses indicate that reformulated gasoline (RFG) currently has the best overall performance for its low cost, and should be the priority alternative fuel for polluted regions. Liquid fuels based on natural gas, M100 or M85, may be the next option by providing good overall performance at low cost and easy compatibility with mainstream fuel distribution systems. Longer term, electric drive vehicles using liquid hydrocarbons in fuel cells may offer large emissions and energy savings at a competitive cost. Natural gas and battery electric vehicles may prove economically feasible at reducing emissions and petroleum consumption in niches determined by the unique characteristics of those systems.     

An analysis of the methods used to calculate the emissions of rolling stock in the UK

The aim of this paper is to analyse and compare the methods used for calculating emissions of UK rolling stock based on their type and mode of operation. The three modes under comparison were; diesel, electric and bi-mode. As well as comparing these three modes of operation, a comparison between Conventional, Freight and High Speed Rail was made. Alternate fuels were considered for diesel and bi-mode locomotives and compared based on their environmental impact. The emissions of trains were studied using three methods. Specifically, the three chosen methods were used to calculate the emissions of each train and a comparison of these methods was made. In the current UK energy climate, diesel trains emit less emissions than electric trains when factoring in mechanical and air resistances. Bi-mode trains have their place in the UK network but with electrification of the network currently in place, this mode of operation will become redundant in the near future. High Speed Rail, although time efficient, releases high emissions due to energy consumption increasing with the square of speed. Alternative fuels, such as biodiesel, should be a consideration for the future of rail, as emissions fall dramatically with content of biodiesel in fuel blends.     

Strategies to achieve deep reductions in metropolitan transportation GHG emissions: the case of Philadelphia

ABSTRACT

This paper investigates strategies that could achieve an 80% reduction in transportation emissions from current levels by 2050 in the City of Philadelphia. The baseline daily lifecycle emissions generated by road transportation in the Greater Philadelphia Region in 2012 were quantified using trip information from the 2012 Household Travel Survey (HTS). Emissions were projected to the year 2050 accounting for population growth and trends in vehicle technology for both the Greater Philadelphia Region and the City of Philadelphia. The impacts of vehicle technology and shifts in travel modes on greenhouse gas (GHG) emissions in 2050 were quantified using a scenario approach. The analysis of 12 different scenarios suggests that 80% reduction in emissions is technically feasible through a combination of active transportation, cleaner fuels for public transit vehicles, and a significant market penetration of battery-electric vehicles. The additional electricity demand associated with greater use of electric vehicles could amount to 10.8 TWh/year. The use of plug-in hybrid electric vehicles (PHEV) shows promising results due to high reductions in GHG emissions at a potentially manageable cost.     

Air transportation in a carbon constrained world: Long-term dynamics of policies and strategies for mitigating the carbon footprint of commercial aviation

With increasing demand for air transportation worldwide and decreasing marginal fuel efficiency improvements, the contribution of aviation to climate change relative to other sectors is projected to increase in the future. As a result, growing public and political pressures are likely to further target air transportation to reduce its greenhouse gas emissions. The key challenges faced by policy makers and air transportation industry stakeholders is to reduce aviation greenhouse gas emissions while sustaining mobility for passengers and time-sensitive cargo as well as meeting future demand for air transportation in developing and emerging countries. This paper examines five generic policies for reducing the emissions of commercial aviation; (1) technological efficiency improvements, (2) operational efficiency improvements, (3) use of alternative fuels, (4) demand shift and (5) carbon pricing (i.e. market-based incentives). In order to evaluate the impacts of these policies on total emissions, air transport mobility, airfares and airline profitability, a system dynamics modeling approach was used. The Global Aviation Industry Dynamics (GAID) model captures the systemic interactions and the delayed feedbacks in the air transportation system and allows scenarios testing through simulations. For this analysis, a set of 34 scenarios with various levels of aggressiveness along the five generic policies were simulated and tested. It was found that no single policy can maintain emissions levels steady while increasing projected demand for air transportation. Simulation results suggest that a combination of the proposed policies does produce results that are close to a “weak” sustainability definition of increasing supply to meet new demand needs while maintaining constant or increasing slightly emissions levels. A combination of policies that includes aggressive levels of technological and operations efficiency improvements, use of biofuels along with moderate levels of carbon pricing and short-haul demand shifts efforts achieves a 140% increase in capacity in 2024 over 2004 while only increasing emissions by 20% over 2004. In addition, airline profitability is moderately impacted (10% reduction) compared to other scenarios where profitability is reduced by over 50% which pose a threat to necessary investments and the implementation of mitigating measures to reduce CO2 emissions. This study has shown that an approach based on a portfolio of mitigating measures and policies spanning across technology and operational improvements, use of biofuels, demand shift and carbon pricing is required to transition the air transportation industry close to an operating point of environmental and mobility sustainability.