Well-to-wheel costs,primary energy demand,and greenhouse gas emissions for the production and operation of conventional and alternative vehicles

This study provides a comprehensive comparison of well-to-wheel (WTW) energy demand, WTW GHG emissions, and costs for conventional ICE and alternative passenger car powertrains, including full electric, hybrid, and fuel cell powertrains. Vehicle production, operation, maintenance, and disposal are considered, along with a range of hydrogen production processes, electricity mixes, ICE fuels, and battery types. Results are determined based on a reference vehicle, powertrain efficiencies, life cycle inventory data, and cost estimations. Powertrain performance is measured against a gasoline ICE vehicle. Energy carrier and battery production are found to be the largest contributors to WTW energy demand, GHG emissions, and costs; however, electric powertrain performance is highly sensitive to battery specific energy. ICE and full hybrid vehicles using alternative fuels to gasoline, and fuel cell vehicles using natural gas hydrogen production pathways, are the only powertrains which demonstrate reductions in all three evaluation categories simultaneously (i.e., WTW energy demand, emissions, and costs). Overall, however, WTW emission reductions depend more on the energy carrier production pathway than on the powertrain; hence, alternative energy carriers to gasoline for an ICE-based fleet (including hybrids) should be emphasized from a policy perspective in the short-term. This will ease the transition towards a low-emission fleet in Switzerland.     

Fuel cycle emissions and life cycle costs of alternative fuel vehicle policy options for the City of Houston municipal fleet

Municipal fleet vehicle purchase decisions provide a direct opportunity for cities to reduce emissions of greenhouse gases (GHG) and air pollutants. However, cities typically lack comprehensive data on total life cycle impacts of various conventional and alternative fueled vehicles (AFV) considered for fleet purchase. The City of Houston, Texas, has been a leader in incorporating hybrid electric (HEV), plug-in hybrid electric (PHEV), and battery electric (BEV) vehicles into its fleet, but has yet to adopt any natural gas-powered light-duty vehicles. The City is considering additional AFV purchases but lacks systematic analysis of emissions and costs. Using City of Houston data, we calculate total fuel cycle GHG and air pollutant emissions of additional conventional gasoline vehicles, HEVs, PHEVs, BEVs, and compressed natural gas (CNG) vehicles to the City's fleet. Analyses are conducted with the Greenhouse Gases, Regulated Emissions, and Energy use in Transportation (GREET) model. Levelized cost per kilometer is calculated for each vehicle option, incorporating initial purchase price minus residual value, plus fuel and maintenance costs. Results show that HEVs can achieve 36% lower GHG emissions with a levelized cost nearly equal to a conventional sedan. BEVs and PHEVs provide further emissions reductions, but at levelized costs 32% and 50% higher than HEVs, respectively. CNG sedans and trucks provide 11% emissions reductions, but at 25% and 63% higher levelized costs, respectively. While the results presented here are specific to conditions and vehicle options currently faced by one city, the methods deployed here are broadly applicable to informing fleet purchase decisions.     

Carsharing’s life-cycle impacts on energy use and greenhouse gas emissions

This paper examines the life-cycle inventory impacts on energy use and greenhouse gas (GHG) emissions as a result of candidate travelers adopting carsharing in US settings. Here, households residing in relatively dense urban neighborhoods with good access to transit and traveling relatively few miles in private vehicles (roughly 10% of the U.S. population) are considered candidates for carsharing. This analysis recognizes cradle-to-grave impacts of carsharing on vehicle ownership levels, travel distances, fleet fuel economy (partly due to faster turnover), parking demand (and associated infrastructure), and alternative modes. Results suggest that current carsharing members reduce their average individual transportation energy use and GHG emissions by approximately 51% upon joining a carsharing organization. Collectively, these individual-level effects translate to roughly 5% savings in all household transport-related energy use and GHG emissions in the U.S. These energy and emissions savings can be primarily attributed to mode shifts and avoided travel, followed by savings in parking infrastructure demands and fuel consumption. When indirect rebound effects are accounted for (assuming travel-cost savings is then spent on other goods and services), net savings are expected to be 3% across all U.S. households.     

Low-carbon futures for Shenzhen’s urban passenger transport: A human-based approach

Shenzhen, one of China’s leading cities, has the potential to be a model for achieving China’s ambitious CO₂ emission reduction targets. Using data from a travel diary survey in Shenzhen in 2014, we develop a human-based agent model to conduct a scenario study of future urban passenger transport energy consumption and CO₂ emissions from 2014 to 2050. Responses to different policy interventions at the individual level are taken into account. We find that with current policies, the carbon emissions of the urban passenger transport sector in Shenzhen will continuously increase without a peak before 2050. Strengthening 21 transport policies will help Shenzhen to peak the carbon emissions by 2030 for passenger transport. Among these policies, the car quota policy and the fuel economy standard are essential for achieving a carbon peak by 2030. In addition, a package of seven policies, including fewer car quotas, a stricter fuel economy standard, raising parking fees, limiting parking supply, increasing EV charging facilities and subway lines, and improving public transport services, is sufficient to peak carbon emissions by 2030, although at an emissions level higher than for the 21 policies.     

Eco-driver training within the City of Calgary’s municipal fleet: Monitoring the impact

This article highlights eco-driving as an available policy option to reduce climate altering GHG emissions. Recognizing the need to reduce the environmental impact of its fleet operations, the City of Calgary is a leader in developing programs and policies that aim to reduce GHG emissions and associated pollutants resulting from the use of fossil fuels. Among local action taken against climate change, the City sought to quantify CO₂ emissions reductions from their municipal fleet as a result of eco-driver training, with a specific focus on engine idling. Fifteen drivers from the Development & Building Approvals Business Unit had in-vehicle monitoring technology (CarChips®) installed into their vehicles as part of a three-phase research process. The results show that gasoline and hybrid vehicles decreased average idling between 4% and 10% per vehicle per day, leading to an average emissions decrease of 1.7 kg of CO₂ per vehicle per day.     

Recent advances in automotive technology and the cost-effectiveness of fuel economy improvement

The potential for improving the fuel economy of conventional, gasoline-powered automobiles through optimized application of recent technology advances is analyzed. Results are presented at three levels of technical certainty, ranging from technologies already in use to technologies facing technical constraints (such as emissions control problems) which might inhibit widespread use. A fleet-aggregate, engineering-economic analysis is used to estimate a range of U.S. new car fleet average fuel economy levels achievable given roughly 10 years of lead time. Technology cost estimates are compared to fuel savings in order to determine likely cost-effective levels of fuel economy, which are found to range from 39 miles per gallon to 51 miles per gallon depending on technology certainty level. The corresponding estimated increases in average new car price range from $540 to $790 (1993$). Estimated fuel savings payback times average less than 3 years and the cost of conserved energy averages $0.50 per gallon, indicating that these levels of fuel economy improvement are cost-effective over a vehicle lifetime. A vehicle stock turnover model is used to project the reductions in gasoline consumption and associated emissions that would follow if the estimated fuel economy levels are achieved. Potential trade-offs regarding vehicle performance, safety, and emissions are also discussed.     

VMT, energy consumption, and GHG emissions forecasting for passenger transportation

Globalization, greenhouse gas emissions and energy concerns, emerging vehicle technologies, and improved statistical modeling capabilities make the present moment an opportune time to revisit aggregate vehicle miles traveled (VMT), energy consumption, and greenhouse gas (GHG) emissions forecasting for passenger transportation. Using panel data for the 48 continental states during the period 1998-2008, the authors develop simultaneous equation models for predicting VMT on different road functional classes and examine how different technological solutions and changes in fuel prices can affect passenger VMT. Moreover, a random coefficient panel data model is developed to estimate the influence of various factors (such as demographics, socioeconomic variables, fuel tax, and capacity) on the total amount of passenger VMT in the United States. To assess the influence of each significant factor on VMT, elasticities are estimated. Further, the authors investigate the effect of different policies governing fuel tax and population density on future energy consumption and GHG emissions. The presented methodology and estimation results can assist transportation planners and policy-makers in determining future energy and transportation infrastructure investment needs.     

The Alternative Motor Fuels Act, alternative-fuel vehicles, and greenhouse gas emissions

The corporate average fuel economy (CAFE) standard is the major policy tool to improve the fleet average miles per gallon of automobile manufacturers in the US. The Alternative Motor Fuels Act (AMFA) provides special treatment in calculating the fuel economy of alternative-fuel vehicles to give manufacturers CAFE incentives to produce more alternative-fuel vehicles. AMFA has as its goals an increase in the production of alternative-fuel vehicles and a decrease in gasoline consumption and greenhouse gas emissions. This paper examines theoretically the effects of the program set up under AMFA. It finds that, under some conditions, this program may actually increase the production of fuel-inefficient gasoline vehicles, gasoline consumption and greenhouse gas emissions.     

Greenhouse gas emission benefits of vehicle lightweighting: Monte Carlo probabalistic analysis of the multi material lightweight vehicle glider

Vehicle lightweighting reduces fuel cycle greenhouse gas (GHG) emissions but may increase vehicle cycle (production) GHG emissions because of the GHG intensity of lightweight material production. Life cycle GHG emissions are estimated and sensitivity and Monte Carlo analyses conducted to systematically examine the variables that affect the impact of lightweighting on life cycle GHG emissions. The study uses two real world gliders (vehicles without powertrain or battery) to provide a realistic basis for the analysis. The conventional and lightweight gliders are based on the Ford Fusion and Multi Material Lightweight Vehicle, respectively. These gliders were modelled with internal combustion engine vehicle (ICEV), hybrid electric vehicle (HEV), and battery electric vehicle (BEV) powertrains. The probability that using the lightweight glider in place of the conventional (steel-intensive) glider reduces life cycle GHG emissions are: ICEV, 100%; HEV, 100%, and BEV, 74%.The extent to which life cycle GHG emissions are reduced depends on the powertrain, which affects fuel cycle GHG emissions. Lightweighting an ICEV results in greater base case GHG emissions mitigation (10 t CO₂eq.) than lightweighting a more efficient HEV (6 t CO₂eq.). BEV lightweighting can result in higher or lower GHG mitigation than gasoline vehicles, depending largely on the source of electricity.     

Assessment of motor vehicle use characteristics in three Indian cities

Estimates of emissions and energy consumption by vehicular fleet in India are not backed by reliable values of parameters, leading to large uncertainties. We report new methods, including primary surveys and secondary data sources, to estimate in-use fleet size, annual mileage (kilometers per year), and fuel efficiency of cars and motorised two-wheelers (MTW) for Delhi, and except fleet size and annual mileage of cars, for Visakhapatnam and Rajkot. We estimated that the official number of registered cars and MTW in Indian cities is more than two times the actual number of in-use vehicles. The private vehicular fleet in India is the youngest, its fuel efficiency one of the highest, and annual kilometers travelled is the lowest, compared to many high-income countries, such as the USA and those in European Union. Along with high renewal rate of fleet, the data suggest that it is possible for India to have one of the most fuel-efficient vehicle fleets in the world in the future, if fuel-efficiency standards and fiscal policies to contain growing dieselization are implemented in the country at the earliest.     

Can regional transportation and land-use planning achieve deep reductions in GHG emissions from vehicles?

The Intergovernmental Panel on Climate Change estimates that greenhouse gas emissions (GHG) must be cut 40–70% by 2050 to prevent a greater than 2 °Celsius increase in the global mean temperature; a threshold that may avoid the most severe climate change impacts. Transportation accounts for about one third of GHG emissions in the United States; reducing these emissions should therefore be an important part of any strategy aimed at meeting the IPCC targets. Prior studies find that improvements in vehicle energy efficiency or decarbonization of the transportation fuel supply would be required for the transportation sector to achieve the IPCC targets. Strategies that could be implemented by regional transportation planning organizations are generally found to have only a modest GHG reduction potential. In this study we challenge these findings. We evaluate what it would take to achieve deep GHG emission reductions from transportation without advances in vehicle energy efficiency and fuel decarbonization beyond what is currently expected under existing regulations and market expectations. We find, based on modeling conducted in the Albuquerque, New Mexico metropolitan area that it is possible to achieve deep reductions that may be able to achieve the IPCC targets. Achieving deep reductions requires changes in transportation policy and land-use planning that go far beyond what is currently planned in Albuquerque and likely anywhere else in the United States.     

Long-run relationship among transport demand,income, and gasoline price for the US

Energy used in transport is a particularly important focus for environment-development studies because it is increasing in both developed and developing countries and is largely carbon-intensive. This paper examines whether a systemic, mutually causal, cointegrated relationship exists among mobility demand, gasoline price, income, and vehicle ownership using US data from 1946 to 2006. We find that those variables co-evolve in a transport system; and thus, they cannot be easily disentangled in the short-run. However, estimating a long-run relationship for motor fuel use per capita was difficult because of the efficacy of the CAFE standards to influence fleet fuel economy. The analysis shows that the fuel standards program was effective in improving the fuel economy of the US vehicle fleet and in temporarily lessening the impact on fuel use of increased mobility demand. Among the policy implications are a role for efficiency standards, a limited impact for fuel tax, and the necessity of using a number of levers simultaneously to influence transport systems.     

Impacts of replacement of engine powered vehicles by electric vehicles on energy consumption and CO2 emissions

This paper evaluates the impacts on energy consumption and carbon dioxide (CO₂) emissions from the introduction of electric vehicles into a smart grid, as a case study. The AVL Cruise software was used to simulate two vehicles, one electric and the other engine-powered, both operating under the New European Driving Cycle (NEDC), in order to calculate carbon dioxide (CO₂) emissions, fuel consumption and energy efficiency. Available carbon dioxide data from electric power generation in Brazil were used for comparison with the simulated results. In addition, scenarios of gradual introduction of electric vehicles in a taxi fleet operating with a smart grid system in Sete Lagoas city, MG, Brazil, were made to evaluate their impacts. The results demonstrate that CO₂ emissions from the electric vehicle fleet can be from 10 to 26 times lower than that of the engine-powered vehicle fleet. In addition, the scenarios indicate that even with high factors of CO₂ emissions from energy generation, significant reductions of annual emissions are obtained with the introduction of electric vehicles in the fleet.     

Development of two driving cycles for utility vehicles

Driving cycles are used to assess vehicle fuel consumption and pollutant emissions. The premise in this article is that suburban road-work vehicles and airport vehicles operate under particular conditions that are not taken into account by conventional driving cycles. Thus, experimental data were acquired from two pickup trucks representing both vehicle fleets that were equipped with a data logger. Based on experimental data, the suburban road-work vehicle showed a mixed driving behavior of high and low speed with occasional long periods of idling. In the airport environment, however, the driving conditions were restricted to airport grounds but were characterized by many accelerations and few high speeds. Based on these measurements, microtrips were defined and two driving cycles proposed. Fuel consumption and pollutant emissions were then measured for both cycles and compared to the FTP-75 and HWFCT cycles, which revealed a major difference: at least a 31% increase in fuel consumption over FTP-75. This increased fuel consumption translates into higher pollutant emissions. When CO₂ equivalent emissions are taken into account, the proposed cycles show an increase of at least 31% over FTP-75 and illustrate the importance of quantifying fleet speed patterns to assess CO₂ equivalent emissions so that the fleet manager can determine potential gains in energy or increased pollutant emissions.     

System for assessing Aviation’s Global Emissions (SAGE), Part 2: Uncertainty assessment

This paper focuses on assessing and applying the Federal Aviation Administration’s System for assessing Aviation’s Global Emissions (SAGE), Version 1.5, to evaluate global aircraft fuel consumption and emissions. The model is capable of computing fuel burn and emissions on a flight-by-flight, fleet and global basis. Here, a parametric study was conducted to rank-order the effects that the modeling uncertainties had on estimates of fuel burn and emissions. Statistical methods were applied to analyze both the random and systematic errors of the model. Also, applying the model to a sample policy analysis case allowed an examination of more stringent engine certification standards for mitigating aviation emissions. Uncertainties of the model were carefully accounted for in the fuel burn and emissions scenarios of the policy options. Results show that for some applications, SAGE may be used to resolve small differences in fleet emissions performance. Although the absolute uncertainty in flight-by-flight NO_x predictions from the model are of the order of 40%, results show that it is well within the current capabilities of the model to distinguish between the fleet average NO_x emissions associated with the typical NO_x stringency options considered in policy analyses.     

Lightweighting shipping containers: Life cycle impacts on multimodal freight transportation

Freight transportation by truck, train, and ship accounts for 5% of the United States’ annual energy consumption (U.S. Energy Information Administration, 2017a). Much of this freight is transported in shipping containers. Lightweighting containers is an unexplored strategy to decrease energy and GHG emissions. We evaluate life cycle fuel savings and environmental performance of lightweighting scenarios applied to a forty-foot (12.2 meters) container transported by ship, train, and truck. Use phase burdens for both conventional and lightweighted containers (steel reduction, substitution with aluminum, or substitution with high tensile steel) were compared to life cycle burdens. The study scope ranged from the transportation of one container 100 km to the lifetime movement of the global container fleet on ships. Case studies demonstrated the impact of lightweighting on typical multimodal freight deliveries to the United States. GREET 1 and 2 (Argonne National Laboratory, 2016a,b) were used to estimate the total fuel cycle burdens associated with use phase fuel consumption. Fuel consumption was determined using modal Fuel Reduction Values (FRV), which relate mass reduction to fuel reduction. A lifetime reduction of 21% in the fuel required to transport a container, and 1.4% in the total fuel required to move the vehicles, cargo, and containers can be achieved. It was determined that a 10% reduction in mass of the system will result in a fuel reduction ranging from 2% to 8.4%, depending on the mode. Globally, container lightweighting can reduce energy demand by 3.6 EJ and GHG emissions by 300 million tonnes CO₂e over a 15-year lifetime.     

Strategies to achieve deep reductions in metropolitan transportation GHG emissions: the case of Philadelphia

ABSTRACT

This paper investigates strategies that could achieve an 80% reduction in transportation emissions from current levels by 2050 in the City of Philadelphia. The baseline daily lifecycle emissions generated by road transportation in the Greater Philadelphia Region in 2012 were quantified using trip information from the 2012 Household Travel Survey (HTS). Emissions were projected to the year 2050 accounting for population growth and trends in vehicle technology for both the Greater Philadelphia Region and the City of Philadelphia. The impacts of vehicle technology and shifts in travel modes on greenhouse gas (GHG) emissions in 2050 were quantified using a scenario approach. The analysis of 12 different scenarios suggests that 80% reduction in emissions is technically feasible through a combination of active transportation, cleaner fuels for public transit vehicles, and a significant market penetration of battery-electric vehicles. The additional electricity demand associated with greater use of electric vehicles could amount to 10.8 TWh/year. The use of plug-in hybrid electric vehicles (PHEV) shows promising results due to high reductions in GHG emissions at a potentially manageable cost.     

An analysis on long term emission benefits of a government vehicle fleet replacement plan in northern illinois

There have been a number of studies of the effectiveness of vehicle scrappage programs, which offer incentives to accelerated scrappage of older vehicles often thought to be high emitters. These programs are voluntary and aimed at replacement of household vehicles. In contrast, there is a gap in knowledge related to the emissions benefits of government fleet replacement (retirement) programs. In this study, the efficacy of a fleet replacement program for a local government agency in Northern Illinois, the Forest Preserve of DuPage County (FPDC), is examined using a probabilistic vehicle survival model that accounts for time-varying covariates such as vehicle age and gasoline price. The vehicle lifetime operating emissions are calculated based on the estimated vehicle survival probabilities from the survival model and compared with those derived using the EPA default fleet used in MOBILE6 and the fleet represented by the Oak Ridge National Laboratory (ORNL) survival curve. The results suggest that while there may be short term emission benefits of the FPDC fleet replacement plan, the long-term emission benefits are highly sensitive to economic factors (e.g., future gasoline price) and exhibit a decreasing trend. This indicates that an adaptive multi-stage replacement strategy as opposed to a fixed one is preferable to achieve optimal cost effectiveness.

The fleet size and mix pollution-routing problem

This paper introduces the fleet size and mix pollution-routing problem which extends the pollution-routing problem by considering a heterogeneous vehicle fleet. The main objective is to minimize the sum of vehicle fixed costs and routing cost, where the latter can be defined with respect to the cost of fuel and CO₂ emissions, and driver cost. Solving this problem poses several methodological challenges. To this end, we have developed a powerful metaheuristic which was successfully applied to a large pool of realistic benchmark instances. Several analyses were conducted to shed light on the trade-offs between various performance indicators, including capacity utilization, fuel and emissions and costs pertaining to vehicle acquisition, fuel consumption and drivers. The analyses also quantify the benefits of using a heterogeneous fleet over a homogeneous one.     

Evaluation of fuel cell auxiliary power units for heavy-duty diesel trucks

A large number of heavy-duty trucks idle a significant amount. Heavy-duty line-haul truck engines idle about 20–40% of the time the engine is running, depending on season and operation. Drivers idle engines to power climate control devices (e.g., heaters and air conditioners) and sleeper compartment accessories (e.g., refrigerators, microwave ovens, and televisions) and to avoid start-up problems in cold weather. Idling increases air pollution and energy use, as well as wear and tear on engines. Efforts to reduce truck idling in the US have been sporadic, in part because it is widely viewed in the trucking industry that further idling restrictions would unduly compromise driver comfort and truck operations. The auxiliary power units (APUs) available to replace the idling of the diesel traction engine all have had limited trucking industry acceptance. Fuel cells are a promising APU technology. Fuel cell APUs have the potential to greatly reduce emissions and energy use and save money. In this paper, we estimate costs and benefits of fuel cell APUs. We calculate the payback period for fuel cell APUs to be about 2.6–4.5 years. This estimate is uncertain since future fuel cell costs are unknown and cost savings from idling vary greatly across the truck fleet. The payback period is particularly sensitive to diesel fuel consumption at idle. Given the large potential environmental and economic benefits of fuel cell APUs, the first major commercial application of fuel cells may be as truck APUs.