共查询到20条相似文献,搜索用时 64 毫秒
1.
控制系统的性能对于保证燃料电池发动机安全、可靠、高效地运行非常重要。通过对质子交换膜燃料电池发动机的工作过程分析及其故障处理对控制系统的要求,确定了其控制系统设计的目标。结合燃料电池发动机失效性分析以及具体的使用环境,提出了燃料电池发动机控制系统设计的要点及一般性方法。 相似文献
2.
3.
4.
5.
6.
7.
主要设计了一套燃料电池发动机测试系统,同时对燃料电池发动机动态特性测试方法进行了研究.燃料电池发动机测试系统包括PLC控制系统、辅助电源系统、氢气供给系统、电子负载系统、被测试发动机系统五个部分.加载方式可采用恒流加载和恒功率加载等多种方式,可以实现燃料电池发动机的起动特性、稳态特性、动态响应特性和循环工况运行等多种性... 相似文献
8.
9.
文章对主要介绍了燃料电池电动汽车控制系统的燃料电池技术、发动机系统及蓄电池组,并对各主要组成部件燃料电池、驱动机、辅助动力源进行选型,根据燃料电池电动汽车的动力性、燃料经济性的要求,形成以燃料电池为主,蓄电池组为辅的动力搭配方式。借助运动仿真软件ADVISOR对车辆的动力性、燃料经济性进行运动仿真研究,比较仿真结果,确定一个较为合理的匹配方式。 相似文献
10.
11.
合理的温控措施和浇筑工艺是保证大体积混凝土施工质量的重要手段。文章详细介绍了荣(成)-乌(海)高速小沙湾黄河特大桥主塔承台大体积混凝土的温控设计、温控措施、温度监测,并对监测成果进行了分析。 相似文献
12.
《JSAE Review》1999,20(2):251-258
For the drivetrain control, it has become important for fuel economy or AHS to control the throttle valve of the engine and the gear ratio of CVT simultaneously by DBW when the automobile is equipped with CVT. In this paper, LQI control theory was applied to control the drivertrain as a 2-I/O system to satisfy the demanded speed and better fuel economy. Moreover, modification of the weight parameter of LQI was investigated to obtain the desired performance for fuel economy or vehicle acceleration. Relatively good results were obtained. 相似文献
13.
S. Kim K. Park H. J. Song Y. K. Hwang S. J. Moon H. S. Ahn M. Tomizuka 《International Journal of Automotive Technology》2012,13(1):87-95
Developed in this research is a control logic for the ARC (Active Roll Control) system that uses rotary-type hydraulic stabilizer
actuators at the front and rear axles. The hydraulic components of the system were modeled in detail using AMESim, and a driving
logic for the hydraulic circuit was constructed based upon the model. The performance of the driving logic was evaluated on
a test bench, and it demonstrated good pressure tracking capability. The control logic was then designed with the target of
reducing the roll motion of the vehicle during cornering. The control logic consists of two parts: a feedforward controller
that generates anti-roll moments in response to the centrifugal force, and a feedback controller that generates anti-roll
moments in order to make the roll angle to follow its target value. The developed ARC logic was evaluated on a test vehicle
under various driving conditions including a slowly accelerated circular motion and a sinusoidal steering. Through the test,
the ARC system demonstrated successful reduction of the roll motion under all conditions, and any discomfort due to the control
delay was not observed even at a fast steering maneuver. 相似文献
14.
大跨度钢斜拉桥的施工监控及其目标精度值 总被引:19,自引:1,他引:19
结合南京长江第二大桥南汊桥的施工监控 ,就大跨度扁平钢箱梁斜拉桥施工监控的内容与方法、施工监控目标精度值进行探讨。 相似文献
17.
18.