Low-carbon futures for Shenzhen’s urban passenger transport: A human-based approach

Shenzhen, one of China’s leading cities, has the potential to be a model for achieving China’s ambitious CO₂ emission reduction targets. Using data from a travel diary survey in Shenzhen in 2014, we develop a human-based agent model to conduct a scenario study of future urban passenger transport energy consumption and CO₂ emissions from 2014 to 2050. Responses to different policy interventions at the individual level are taken into account. We find that with current policies, the carbon emissions of the urban passenger transport sector in Shenzhen will continuously increase without a peak before 2050. Strengthening 21 transport policies will help Shenzhen to peak the carbon emissions by 2030 for passenger transport. Among these policies, the car quota policy and the fuel economy standard are essential for achieving a carbon peak by 2030. In addition, a package of seven policies, including fewer car quotas, a stricter fuel economy standard, raising parking fees, limiting parking supply, increasing EV charging facilities and subway lines, and improving public transport services, is sufficient to peak carbon emissions by 2030, although at an emissions level higher than for the 21 policies.     

Carbon emission from urban passenger transportation in Beijing

Urban passenger transport significantly contributes to global greenhouse gas emissions, especially in developing countries owing to the rapid motorization, thus making it an important target for carbon reduction. This article established a method to estimate and analyze carbon emission from urban passenger transport including cars, rail transit, taxis and buses. The scope of research was defined based on car registration area, transport types and modes, the stages of rail transit energy consumption. The data availability and gathering were fully illustrated. A city level emission model for the aforementioned four modes of passenger transport was formulated, and parameters including emission factor of electricity and fuel efficiency were tailored according to local situations such as energy structure and field survey. The results reveal that the emission from Beijing’s urban passenger transport in 2012 stood at 15 million tonnes of CO₂, of which 75.5% was from cars, whereas car trip sharing constitutes only 42.5% of the total residential trips. Bus travel, yielding 28.6 g CO₂, is the most efficient mode of transport under the current situations in terms of per passenger kilometer (PKM) emission, whereas car or taxi trips emit more than 5 times that of bus trips. Although a decrease trend appears, Beijing still has potential for further carbon reduction in passenger transport field in contrast to other cities in developed countries. Development of rail transit and further limitation on cars could assist in reducing 4.39 million tonnes CO₂ emission.     

Vehicle restrictions and CO2 emissions in Beijing – A simple projection using available data

The Beijing Government launched a new policy on restricting vehicle ownership in late 2010 to regulate the faster motorization and the excessive vehicular carbon dioxide (CO₂) emissions. In this paper, we first analyzed this policy and its effect on private passenger vehicle population. The private passenger vehicle population in Beijing from 2011 to 2020 was predicted under three different scenarios: no constraint (NC), current constraint (CC) and tighter constraint (TC). Then the assessment of vehicular emissions reduction benefits was made on the basis of private passenger vehicle population, vehicle kilometers traveled and CO₂ emission factors. It was projected that the CO₂ emissions in 2020 will reach 23.90, 15.55 and 13.23 million tons under NC, CC and TC respectively. The policy is very effective in controlling the faster motorization and reducing CO₂ emissions.     

High-speed rail's potential for the reduction of carbon dioxide emissions from short haul aviation: a longitudinal study of modal substitution from an energy generation and renewable energy perspective

Abstract

This paper quantifies and evaluates, utilising a ‘bottom-up’ approach, the effect on CO₂ emissions of a modal shift from short-haul air travel to high-speed rail (HSR), based on projected passenger movements, between Sydney and Melbourne, Australia during the period 2010–2030. To date, peer-reviewed studies assessing the CO₂ emissions from these competing modes of high-speed transportation have been restricted principally to a cross-sectional assessment, with a Eurocentric bias. This present comparative study seeks to address a gap in the literature by assessing, longitudinally, the CO₂ emissions associated with the proposed operation of HSR against the ‘business-as-usual’ air scenario between Sydney and Melbourne. Under the assumed 50/50 modal shift, and the Australian government's current renewable electricity target, an annual reduction in CO₂ emissions of approximately 14% could be achieved when compared with a ‘business-as-usual’ air scenario. This percentage reduction represents a 62 kt reduction in base year, 2010, and a 114 kt reduction in the final year, 2030. In total, the overall reduction achieved by such a modal shift, under the assumed conditions, during the period 2010–2030, equates to approximately 1.87 Mt of CO₂. Importantly, if the electrical energy supply for HSR operations was further ‘decarbonised’, then it follows that a greater emission reduction would be achieved.     

Factors and scenario analysis of transport carbon dioxide emissions in rapidly-developing cities

To identify key factors of transport CO₂ emissions and determine effective policies for emission reductions in fast-growing cities, this study establishes transport CO₂ emission models, quantifying the influences of polycentricity and satellite cities and re-examining the effects of per capita GDP and metro service. Based on the model results, we forecast future residents’ urban transport CO₂ emissions under several scenarios of different urban and transport policies and new energy technologies. We find nonlinear quadratic growth relationship between commuting CO₂ emissions and per capita GDP, and the elasticities of household and individual commuting CO₂ emission to per capita GDP are 1.90% and 1.45%, respectively. Developing job-housing balanced satellite cities and self-contained polycentric city can greatly decrease emissions from high emitters and can contribute to about 51–82% of the emission reductions by 2050 compared with the scenario of business as usual (BAU). Promotion of electric vehicles, electric public buses, metros, and improvement of traditional energy efficiency contributes to about 48–57% of the emission reductions by 2050 compared with the BAU. When these policies and technologies are combined, about 90% of the emissions could be reduced by 2050 compared with the BAU, and the emissions will be about 1.2–4.9 times of the present. The findings suggest that fostering polycentric urban form and job-housing balanced satellite cities is the key step for future transport CO₂ emission reductions. Metro network promotion, energy efficiency improvement, and new energy type applications can also be effective in emission reductions.     

The significant impacts on traffic and emissions of ferrying children to school in Beijing

After having implemented numerous regulations, e.g., coercive policies on vehicle use and purchase, it is becoming increasingly difficult to find further potential to control vehicle emissions in Beijing, as the air quality is still poor. This research provides a different approach for policy-makers to reduce vehicle emissions by managing demand. We found that parents ferrying their children to and from school is an important but long-neglected contributor to traffic congestion and vehicle emissions. This phenomenon is very common in China because of the social culture. In this research, parallel tests during both the school season and the non-school season were adopted, and emissions in both seasons were calculated based on travel demand and emission models. The results revealed that emissions factors (in g/km) for criteria pollutants and CO₂ increased by over 10% during rush hours during the school season due to traffic condition deterioration compared with non-school season. Daily HC, CO, NO_x, PM and CO₂ emissions from the passenger car fleet were 8.3%, 7.8%, 6.4%, 6.3% and 6.5% higher compared with those during the non-school season, respectively. These differences are greater than the total vehicular emission reduction by other control measures in 2014 in Beijing. For policy makers, providing safe and efficient ways to ferry children would be a useful and harmonious strategy for future vehicle emission control.     

Environmental impacts of transformative land use and transport developments in the Greater Beijing Region: Insights from a new dynamic spatial equilibrium model

This paper reports the insights into environmental impacts of the ongoing transformative land use and transport developments in Greater Beijing, from a new suite of dynamic land use, spatial equilibrium and strategic transport models that is calibrated for medium to long term land use and transport predictions. The model tests are focused on urban passenger travel demand and associated emissions within the municipality of Beijing, accounting for Beijing’s land use and transport interactions with Tianjin, Hebei and beyond. The findings suggests that background trends of urbanization, economic growth and income rises will continue to be very powerful drivers for urban passenger travel demand across all main modes of transport beyond 2030. In order to achieve the dual policy aims for a moderately affluent and equitable nation and reducing the absolute levels of urban transport emissions by 2030, road charging and careful micro-level coordination between land use, built form and public transport provision may need to be considered together for policy implementation in the near future.     

Modeling the relationships among urban passenger travel carbon dioxide emissions,transportation demand and supply,population density,and proxy policy variables

To support the development of policies that reduce greenhouse gas (GHG) emissions by encouraging reduced travel and increased use of efficient transportation modes, it is necessary to better understand the explanatory effects that transportation, population density, and policy variables have on passenger travel related CO₂ emissions. This study presents the development of a model of CO₂ emissions per capita as a function of various explanatory variables using data on 146 urbanized areas in the United States. The model takes into account selectivity bias resulting from the fact that adopting policies aimed at reducing emissions in an urbanized area may be partly driven by the presence of environmental concerns in that area. The results indicate that population density, transit share, freeway lane-miles per capita, private vehicle occupancy, and average travel time have a statistically significant explanatory effect on passenger travel related CO₂ emissions. In addition, the presence of automobile emissions inspection programs, which serves as a proxy indicator of other policies addressing environmental concerns and which could influence travelers in making environmentally favorable travel choices, markedly changes the manner in which transportation variables explain CO₂ emission levels.     

Improvement in the estimation and back-extrapolation of CO2 emissions from the Irish road transport sector using a bottom-up data modelling approach

Road transport is a major source of CO₂ emissions in Ireland and accounts for almost 96% of the total CO₂ emissions from the transport sector. Following the recent adopted UNFCCC reporting guidelines on annual inventories [24/CP.19], this study applied the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (2006 IPCC GLs) tier 3 approach to estimate CO₂ emissions from road transport at the vehicle category level, for the first time in Ireland. For this, disaggregated datasets were prepared based on year of vehicle registration and mileage since registration of the vehicle. Such an approach provided a more realistic national scenario in comparison to the use of average mileage degradation in emission calculations. This investigation comprised a recalculation of previous emissions estimates (1990–2012) and an estimation of CO₂ emissions in 2013 using a previously unavailable level of data disaggregation for vehicle mileage as well as using vehicle class specific data and an improved bottom-up estimation methodology in COPERT. Historic vehicle fleet data were restructured, annual mileage data were estimated in relation to the fleet data and back extrapolated using a regression approach.The results showed that the mileage degradation was not only subject to fuel technology, engine size, and age but also the emissions class and vehicle category. It was also observed that the disaggregated level of data provided a different CO₂ emissions split among the vehicle categories than that of previous estimations which were based on an aggregated level of data. Previous emissions inventories (1990–2012) were shown to have underestimated the share from diesel fuelled passenger cars by more than 56% in 2012. Diesel fuelled passenger cars were also found to account for the majority of CO₂ emissions from road transport activities in Ireland in 2013. The level and trend assessment showed that emissions from Euro-II and Euro-III classed vehicles especially for passenger cars, which have a significant contribution to the total emission in 2013 have caused an increase in fleet level emissions in Ireland. In addition, the results also showed that the emissions share from Light Duty Vehicles and Heavy Duty Vehicles were overestimated by previous investigations. This paper highlights the importance of the resolution of data used in emissions inventory preparation which may impact upon future projections and policy formulation. The findings of this investigation are also discussed in relation their implications for road transport policy, including carbon taxation and future policy options aimed at achieving EU emissions target in 2020.     

Real-world gaseous emission characteristics of Euro 6b light-duty gasoline- and diesel-fueled vehicles

To accurately investigate vehicle emissions that have become major contributors to global air pollutants and greenhouse gases, test conditions have been transferred from laboratory type approval test cycles to real-world driving conditions. In this study, the real-world driving emissions of carbon monoxide (CO), total hydrocarbons (THC), nitrogen oxides (NO_x), and carbon dioxide (CO₂) from one gasoline and two diesel Euro 6b light-duty passenger vehicles were investigated by a portable emission measurement system (PEMS) in Lyon, France. NO_x and CO₂ emission controls remain critical to addressing the real-world driving emissions of Euro 6b vehicles. Notably, the tested gasoline vehicle emitted higher CO₂ emissions than diesel vehicles on all types of roads, especially on the urban road with an excess of 29.3–48.3%. The highest emission factors of gaseous pollutants generally occurred on the motorway for the gasoline vehicle, while on the urban road for diesel vehicles. In particular, for high-speed driving conditions, the gasoline vehicle gaseous emissions, especially NO_x emissions, were more affected by acceleration than diesel vehicle emissions. In addition, the CO emissions, especially THC emissions, for the gasoline vehicle, were more influenced by warm-start, especially cold-start, than those for diesel vehicles.     

Prediction of vehicle CO2 emission and its application to eco-routing navigation

Transportation sector accounts for a large proportion of global greenhouse gas and toxic pollutant emissions. Even though alternative fuel vehicles such as all-electric vehicles will be the best solution in the future, mitigating emissions by existing gasoline vehicles is an alternative countermeasure in the near term. The aim of this study is to predict the vehicle CO₂ emission per kilometer and determine an eco-friendly path that results in minimum CO₂ emissions while satisfying travel time budget. The vehicle CO₂ emission model is derived based on the theory of vehicle dynamics. Particularly, the difficult-to-measure variables are substituted by parameters to be estimated. The model parameters can be estimated by using the current probe vehicle systems. An eco-routing approach combining the weighting method and k-shortest path algorithm is developed to find the optimal path along the Pareto frontier. The vehicle CO₂ emission model and eco-routing approach are validated in a large-scale transportation network in Toyota city, Japan. The relative importance analysis indicates that the average speed has the largest impact on vehicle CO₂ emission. Specifically, the benefit trade-off between CO₂ emission reduction and the travel time buffer is discussed by carrying out sensitivity analysis in a network-wide scale. It is found that the average reduction in CO₂ emissions achieved by the eco-friendly path reaches a maximum of around 11% when the travel time buffer is set to around 10%.     

Should subsidies to urban passenger transport be increased? A spatial CGE analysis for a German metropolitan area

In many countries passenger transport is significantly subsidized in a variety of ways for various reasons. The objective of this paper is to examine efficiency, distributional, environmental (CO₂ emissions) and spatial effects of increasing different kinds of passenger transport subsidies discriminating between household types, travel purposes and travel modes. The effects are calculated by applying a numerical spatial general equilibrium approach calibrated to an average German metropolitan area. In extension to most studies focusing on only one kind of subsidy, we compare the effects of different transport subsidies within the same unified framework that allows to account for two features not yet considered simultaneously in studies on transport subsidies: endogenous labor supply and location decisions. Furthermore, congestion, travel mode choice, travel related CO₂ emissions and institutional details regarding the tax system in Germany are taken into account. The results suggest that optimal subsidy levels are either small or even zero. While subsidizing public transport is welfare enhancing, subsidies to urban road traffic reduce aggregate urban welfare. Concerning the latter it is shown that making investments in urban road infrastructure capacity or reducing gasoline taxes may even be harmful to residents using predominantly automobile. In contrast, pure commuting subsidies hardly affect aggregate urban welfare, but distributional effects are substantial. All policies cause suburbanization of city residents and (except for subsidizing public transport) contribute to urban sprawl by raising the spatial imbalance of residences and jobs but the effect is relatively small. In addition, the policies induce a very differentiated pattern regarding distributional effects, benefits of landowners and environmental effects.     

Hybrid- and battery-electric vehicles offer low-cost climate benefits in China

Car ownership in China is expected to grow dramatically in the coming decades. If growing personal vehicle demand is met with conventional cars, the increase in greenhouse gas emissions will be substantial. One way to mitigate carbon dioxide (CO₂) emissions from passenger travel is to meet growing demand for cars with alternative vehicles such as hybrid- and battery-electric vehicles (HEVs and BEVs). Our study examines the cost-effectiveness of transitioning from conventional cars to HEVs and BEVs, by calculating their marginal abatement cost (MAC) of carbon in the long-run. We find that transitioning from conventional to hybrid and battery electric light-duty, four-wheel vehicles can achieve carbon emissions reductions at a negative cost (i.e. at a net benefit) in China. In 2030, the average MAC is estimated to be about −$140/ton CO₂ for HEVs and −$515/ton CO₂-saved for BEVs, varying by key parameters. The total mitigation potential of each vehicle technology is estimated to be 1.38 million tons for HEVs and 0.75 million tons for BEVs.     

Reducing CO<Subscript>2</Subscript> from cars in the European Union

The European Union (EU) recently adopted CO₂ emissions mandates for new passenger cars, requiring steady reductions to 95 gCO₂/km in 2021. We use a multi-sector computable general equilibrium (CGE) model, which includes a private transportation sector with an empirically-based parameterization of the relationship between income growth and demand for vehicle miles traveled. The model also includes representation of fleet turnover, and opportunities for fuel use and emissions abatement, including representation of electric vehicles. We analyze the impact of the mandates on oil demand, CO₂ emissions, and economic welfare, and compare the results to an emission trading scenario that achieves identical emissions reductions. We find that vehicle emission standards reduce CO₂ emissions from transportation by about 50 MtCO₂ and lower the oil expenditures by about €6 billion, but at a net added cost of €12 billion in 2020. Tightening CO₂ standards further after 2021 would cost the EU economy an additional €24–63 billion in 2025, compared with an emission trading system that achieves the same economy-wide CO₂ reduction. We offer a discussion of the design features for incorporating transport into the emission trading system.     

Exhaust emissions and fuel consumption of a triple-fuel spark-ignition engine powered passenger car

This paper examines the influence of compressed natural gas, liquefied petroleum gas and gasoline fuel on the exhaust emissions and the fuel consumption of a spark-ignition engine powered passenger car. The vehicle was driven according to the urban driving cycle and extra urban driving cycle speed profiles with the warmed-up engine. Cause and effect based analysis reveals potential for using different fuels to reduce vehicle emission and deficiencies associated with particular fuels. The highest tank to wheel efficiency and the lowest CO₂ emission are observed with the natural gas fuelled vehicle, that also featured the highest total hydrocarbon emissions and high NO_x emissions because of fast three way catalytic converter aging due the use of the compressed natural gas. Retrofitted liquefied petroleum gas fuel supply systems feature the greatest air-fuel ratio variations that result in the lowest TtW efficiency and in the highest NO_x emissions of the liquefied gas fuelled vehicle.     

Estimation of cost and CO2 emissions with a sustainable cross-border supply chain in the automobile industry: A case study of Thailand and neighboring countries

CO₂ emissions are increasing because of the growth in the cross-border supply chain, which is leading the locations of assembly plants and suppliers to spread across a wider area. Given that one passenger vehicle needs more than 20,000 components and parts, the automobile industry exploits the cross-border supply chain. Recently, the free cross-border movement of people, goods, capital, and information has accelerated in Asia. Therefore, a sustainable cross-border supply chain is required to reduce both CO₂ emissions and cost. This study estimates total CO₂ emissions per vehicle including production and transportation processes in Thailand and neighboring countries and the change in CO₂ emissions based on future policy scenarios that consider the automobile market and locational conditions in 2030. The results show that locating production close to the place of consumption and the electricity emissions factors in each country should be considered.     

Co-benefits of low carbon passenger transport actions in Indian cities: Case study of Ahmedabad

Rising population, income and urbanization are increasing urban passenger transport demand in India. Energy and emissions intensities associated with conventional transport are no longer sustainable vis-a-vis energy security, air quality and climate change. Cities are seeking transport roadmaps that jointly mitigate these risks. Roadmaps vary across cities, but approach to delineate actions is common: (i) ‘representative vision’ that articulates long-term goals, (ii) methods for comparative scenarios assessment, and (iii) quantification of co-benefits to prioritize actions. This paper illustrates application of quantitative modeling to assess development and environmental co-benefits for Ahmedabad city. The paper constructs two transport scenarios spanning till 2035. The bifurcating themes are: (i) Business-as-Usual (BAU) and Low Carbon Scenario (LCS). The quantitative assessment using Extended Snapshot (ExSS) Model shows that transport activity shall result in four-fold increase in energy demand under BAU from 2010 to 2035. Three key contributors to CO₂ mitigation under LCS in merit order are: (i) fuel switch, including decarbonized electricity, (ii) modal shift, and (iii) substitution of travel demand. Scenarios analysis shows that LCS improves energy security by reducing oil demand and also delivers air quality co-benefits – reducing 74% NOx and 83% PM_2.5 from the passenger transport sector compared to BAU in 2035. Finally, the paper argues that cities in developing countries can leverage carbon finance to develop sustainable and low carbon mobility plans that prevent adverse infrastructure and behavioral lock-ins and prompt low carbon development.     

Estimating changes in transport CO2 emissions due to changes in weather and climate in Sweden

There is a considerable body of studies on the relationship between daily transport activities and CO₂ emissions. However, how these emissions vary in different weather conditions within and between the seasons of the year is largely unknown. Because individual activity–travel patterns are not static but vary in different weather conditions, it is immensely important to understand how CO₂ emissions vary due to the change of weather. Using Swedish National Travel Survey data, with emission factors calculated through the European emission factor model ARTEMIS, this study is a first attempt to derive the amount of CO₂ emission changes subject to the change of weather conditions. A series of econometric models was used to model travel behaviour variables that are crucial for influencing individual CO₂ emissions. The marginal effects of weather variables on travel behaviour variables were derived. The results show an increase of individual CO₂ emissions in a warmer climate and in more extreme temperature conditions, whereas increasing precipitation amounts and snow depths show limited effects on individual CO₂ emissions. It is worth noting that the change in CO₂ emissions in the scenario of a warmer climate and a more extreme temperature tends to be greater than the sum of changes in CO₂ emissions in each individual scenario. Given that a warmer climate and more extreme weather could co-occur more frequently in the future, this result suggests even greater individual CO₂ emissions than expected in such a future climate.     

Reducing CO2 emissions of conventional fuel cars by vehicle photovoltaic roofs

The European Union has adopted a range of policies aiming at reducing greenhouse gas emissions from road transport, including setting binding targets for tailpipe CO₂ emissions for new light-duty fleets. The legislative framework for implementing such targets allows taking into account the CO₂ savings from innovative technologies that cannot be adequately quantified by the standard test cycle CO₂ measurement. This paper presents a methodology to define the average productivity of vehicle-mounted photovoltaic roofs and to quantify the resulting CO₂ benefits for conventional combustion engine-powered passenger cars in the European Union. The method relies on the analysis of a large dataset of vehicles activity data, i.e. urban driving patterns acquired with GPS systems, combined with an assessment of the shading effect from physical obstacles and indoor parking. The results show that on average the vehicle photovoltaic roof receives 58% of the available solar radiation in real-world conditions, making it possible to reduce CO₂ emissions from passenger cars in a range from 1% to 3%, assuming a storage capacity of 20% of the 12 V battery dedicated to solar energy. This methodology can be applied to other vehicles types, such as light and heavy-duty, as well as to different powertrain configurations, such as hybrid and full electric.     

Examining the effects of the built environment and residential self-selection on commuting trips and the related CO2 emissions: An empirical study in Guangzhou,China

Numerous studies have established the link between the built environment and travel behavior. However, fewer studies have focused on environmental costs of travel (such as CO₂ emissions) with respect to residential self-selection. Combined with the application of TIQS (Travel Intelligent Query System), this study develops a structural equations model (SEM) to examine the effects of the built environment and residential self-selection on commuting trips and their related CO₂ emissions using data from 2015 in Guangzhou, China. The results demonstrate that the effect of residential self-selection also exists in Chinese cities, influencing residents’ choice of living environments and ultimately affecting their commute trip CO₂ emissions. After controlling for the effect of residential self-selection, built environment variables still have significant effects on CO₂ emissions from commuting although some are indirect effects that work through mediating variables (car ownership and commuting trip distance). Specifically, CO₂ emissions are negatively affected by land-use mix, residential density, metro station density and road network density. Conversely, bus stop density, distance to city centers and parking availability near the workplace have positive effects on CO₂ emissions. To promote low carbon travel, intervention on the built environment would be effective and necessary.