An experimental study of the effect of low-noise wheels in reducing noise and vibration

Wheel/rail interaction is a major source of railway noise. A low-noise wheel structure is developed and its effect on noise reduction is investigated. This low-noise wheel employs a rubber material inserted into the steel rim or mounted on the wheel surface. The low-noise wheel has low stiffness and a high-damping ratio compared to a solid wheel. Measurement shows that it reduces rolling and squealing. It turns out that a subway line with the proposed wheel could reduce its interior noise level by 4–5 dB(A) and vehicle vibration level by 7–8 dB. While the proposed structure seems promising in noise reduction for railway vehicles, the endurance and cost effectiveness of the low-noise wheel are yet to be verified.     

Prediction of ground vibration amplitudes due to urban railway traffic using quantitative and qualitative field data

The growth of railway transport in urban areas has lead to an increase in ground vibrations enhancing their negative environmental impact. Therefore is mandatory to predict and control ground vibrations. This work presents a methodology for the determination of prediction models of ground vibration amplitudes due to railway train circulation in urban environments. Using quantitative predictors (train speed and distance) and qualitative predictors (railway track type, dominant geology and building type), being the use of the latter predictors justified by the fact that, most frequently, quantitative parameters are very difficult to obtain in the urban environment due to their characterization. Thus, a detailed statistical study based on the proposal and validation of multiple linear regression models, is successfully applied in order to predict vibration amplitudes produced by railway train circulation, in the considered domain, as function of quantitative and qualitative predictors, easily obtained in field work. A multiple linear regression model for ground vibration prediction due to underground railway traffic has been presented for the Lisbon area.     

盾构隧道整体道床剥离病害规律研究北大核心CSCD

盾构隧道整体道床的剥离病害已严重影响地铁的安全运营。为研究整体道床剥离病害的规律,文章以国内某运营地铁线路为工程背景,建立整体道床-管片-注浆层数值模型进行分析研究。结果表明:列车轮组作用在道床一侧靠近伸缩缝位置时会引起较大的道床剥离变形,是最不利位置;列车荷载在振动作用下引起的剥离量远大于静载作用时的,且两者间存在函数关系;伸缩缝位置是最易发生剥离的区域,剥离首先发生在伸缩缝两侧边缘,随列车动载作用时间增加,剥离区域扩展至伸缩缝1.5 m范围内;注浆层刚度与接触面黏结强度均是影响剥离量的重要因素,提升注浆层刚度和道床-管片接触面的黏结强度可有效减少剥离量。     

A decision support approach for condition-based maintenance of rails based on big data analysis

In this paper, a decision support approach is proposed for condition-based maintenance of rails relying on expert-based systems. The methodology takes into account both the actual conditions of the rails (using axle box acceleration measurements and rail video images) and the prior knowledge of the railway track. The approach provides an integrated estimation of the rail health conditions to support the maintenance decisions for a given time period. An expert-based system is defined to analyse interdependency between the prior knowledge of the track (defined by influential factors) and the surface defect measurements over the rail. When the rail health conditions is computed, the different track segments are prioritized, in order to facilitate grinding planning of those segments of rail that are prone to critical conditions. In this paper, real-life rail conditions measurements from the track Amersfoort-Weert in the Dutch railway network are used to show the benefits of the proposed methodology. The results support infrastructure managers to analyse the problems in their rail infrastructure and to efficiently perform a condition-based maintenance decision making.     

Rail track infrastructure ownership: investment and operational issues

As privatisation of railway systems reach the political agendas in a number of countries, the separation of track infrastructure from train operations is seen as providing the vehicle which will improve profitability within the rail industry. This paper deals with three main issues related to such separation within a freight railway focus, namely: investment appraisal; track standards and maintenance; and train operating performance. The conflicts of interest between the owners of track and their client operators are discussed in detail. Costs related to track capacity and congestion need to be taken into account, given that additional trains are likely to lead to increased risk of delays to existing services. The paper discusses the use of a travel time reliability model to estimate the additional costs imposed on the system through the introduction of specific train services.It is concluded that investment in individual elements of railway infrastructure must be integrated with the overall financial and customer service strategies of both operators and owners. As an alternative to current practices, a hybrid model of track ownership is put forward here. Under such a model, a joint-venture company with equity from the main ÒplayersÓ would be owner of track. This would allow some of the benefits of vertical integration to be retained, whilst providing fair access to new operators.     

Cost effective future derailment mitigation techniques for rail freight traffic management in Europe

Safe and reliable traffic management is vital for uninterrupted and successful operation of the European rail network, where mixed traffic (i.e. freight and passenger) services are run. Although rail freight derailment is infrequent, its consequences can be severe and may result in different forms of costs, including infrastructure; rolling stock; traffic disruptions; injuries and fatalities. The objective of this research paper is to conduct a cost benefit analysis (CBA) to identify cost effective mitigation techniques for efficient rail freight traffic management in Europe, by 2050. Reviewing previous derailments and studies, eight sets of derailment causes are analysed and, for each of them, sets of mitigation techniques are aimed at for their alleviation. The study finds that the highest cumulative costs of derailment are associated with ‘wheel failure’, while the lowest cumulative cost is identified for ‘excessive track width’. Regarding mitigation techniques, the lowest cumulative benefits are demonstrated for ‘track height’ interventions, whereas ‘wheel failure’ alleviation demonstrates the highest benefits, in value terms (all by 2050). In most cases, the benefit to cost ratio did not exceed 2.6; in two cases (‘track height’ and ‘rail failures’) the ratio remained below 1 – a negative outcome where cost is higher than benefit. The study suggests that the most cost-efficient interventions are those applied to ‘hot axle box and axle rupture’ and ‘spring and suspension failure’.     

Conflict Resolution through Negotiation in a Railway Open Access Market: a Multi-agent System Approach

Abstract

Open access reforms to railway regulations allow multiple train operators to provide rail services on a common infrastructure. As railway operations are now independently managed by different stakeholders, conflicts in operations may arise, and there have been attempts to derive an effective access charge regime so that these conflicts may be resolved. One approach is by direct negotiation between the infrastructure manager and the train service providers. Despite the substantial literature on the topic, few consider the benefits of employing computer simulation as an evaluation tool for railway operational activities such as access pricing. This article proposes a multi-agent system (MAS) framework for the railway open market and demonstrates its feasibility by modelling the negotiation between an infrastructure provider and a train service operator. Empirical results show that the model is capable of resolving operational conflicts according to market demand.     

Risk of increasing temperature due to climate change on high-speed rail network in Spain

With more than 3,200 km of track, the Spanish high-speed rail network is the longest network in Europe and the second largest in the world after China. Due to its geographical location in southern Europe, the entire network is exposed to periods of elevated temperatures that can cause disturbances and severe disruptions such as rail deformation, or in the worst case, lateral track buckling. In this study, the vulnerability of the current Spanish high-speed rail network is analysed in terms of track buckling failures with a Monte Carlo simulation. Downscaled temperature projections from a range of Global Climate Models (GCMs), under three Representative Concentration Pathways (RCP4.5, RCP6.0 and RCP8.5), were forced in a buckling model and particularized for different segments of the network. With that, the proposed methodology provides the number of rail buckles expected per year by assuming current maintenance standards and procedures. The result reveals significant increase in the occurrence of buckling events for future years, mainly in the central and southern areas of mainland Spain. However, relevant variations are found in different climates and time horizon scenarios in Spain. The anticipated buckling occurrences highlight the vulnerability of the Spanish rail network in the context of global warming scenarios. Overall, the proposed methodology is designed to be applicable in large-scale railway networks to identify potential buckling sites for the purpose of understanding and predicting their behaviour.     

A proposal for cost-related and market-oriented train running charges

This paper examines some key aspects of a charging system for promoting railway transport, including charges reflecting a clear relationship with costs (transparency) and charges reflecting the quality of the infrastructure manager's service. Train running charges recover track-related costs and can help to develop a charging system that meets these requirements. To orient train running charges to the market, a method for processing track maintenance and renewal costs is proposed whereby the quality of the service provided by an infrastructure is measured according to its utility to the railway undertaking. To achieve transparency, a single indicator is used for cost planning and the subsequent levying of costs on railway undertakings. The paper includes an example of how proposed train running charges would be calculated according to data from 14 European countries. The example shows that short-distance trains generate the lowest maintenance and renewal costs, followed by long-distance trains and freight trains.     

Guidance for new policy developments on railway noise and vibration

Noise and vibration are two of the main problems associated with railways in residential areas. To ensure quality of life and well-being of inhabitants living in the vicinity of railway paths, it is important to evaluate, understand, control and regulate railway noise and vibration. Much attention has been focused on the impact of noise from railway traffic but the consideration of railway-induced vibration has often been neglected. This paper aims to provide policy guidance based on results obtained from the analyses of relationships estimated from ordinal logit models between human response, railway noise exposure and railway vibration exposure. This was achieved using data from case studies comprised of face-to-face interviews (N = 931), internal vibration measurements (N = 755), and noise calculations (N = 688) collected within the study “Human Response to Vibration in Residential Environments” by the University of Salford, UK. Firstly, the implications of neglecting vibration in railway noise policies are investigated. The findings suggest that it is important to account for railway induced vibrations in future noise and transport policies, as neglecting vibrations results in an underestimation of people highly annoyed by noise. Secondly, implications of neglecting different types of railway sources are presented. It was found that the impact of noise and vibration form maintenance operations should be better understood and should be taken into account when assessing the environmental impact of railways in residential environments. Finally, factors that were found to influence railway vibration annoyance are presented and expressed as weightings. The data shows that factors specific to a particular residential area should also be taken into account in future vibration policies as the literature shows that attitudinal, socio-demographic and situational factors have a large influence on vibration annoyance responses. This work will be of interest to researchers and environmental health practitioners involved in the assessment of vibration complaints, as well as to policy makers, planners and consultants involved in the design of buildings and railways.     

Standardization of capacity unit for headway-based rail capacity analysis

Determining the required capacity upgrades to accommodate future demand is a critical process in assisting public and private financing of capacity investments. Conventional railway systems usually operate multiple types of trains on the same track. These different types of trains can exert substantially different capacity impact, and can cause serious operational conflicts. In the past, rail line capacity is commonly defined as the maximum number of trains that can be operated on a section of track within a given time period. However, a specific unit (trains/hr or trains/day) does not reflect the heterogeneity of train types. According to the concept of base train equivalents (BTE) and base train unit (BTU), this study developed headway-based models to determine BTE for transforming different train types into a standard unit (i.e., BTU). An approximate method for lines with three and more types of trains was also proposed to compute BTEs for non-base trains. Results from the case studies demonstrate that this method enables the standardization of rail capacity unit, facilitates assessment of the impact from heterogeneous trains, and allows comparison and evaluation of the capacity measurements from different lines and systems.     

Estimating the marginal cost of railway track renewals using corner solution models

Economic theory advocates marginal cost pricing for efficient utilisation of transport infrastructure. A growing body of literature has emerged on the issue of rail marginal infrastructure wear and tear costs, but the majority of the work is focused on costs for infrastructure maintenance. Railway track renewals are a substantial part of an infrastructure manager’s budget, but in disaggregated statistical analyses they cause problems for traditional regression models since there is a piling up of values of the dependent variable at zero. Previous econometric work has sought to circumvent the problem by aggregation in some way. In this paper we instead apply corner solution models to disaggregate (track-section) data, including the zero observations. We derive track renewal cost elasticities with respect to traffic volumes and in turn marginal renewal costs using Swedish railway renewal data over the period 1999–2009. This paper is the first attempt in the literature to apply corner solution models, and in particular the two-part model, to disaggregate renewal cost data in railways. It is also the first paper that we are aware of to report usage elasticities specifically for renewal costs and therefore adds important new evidence to the previous literature where there is a paucity of studies on renewals and considerable uncertainty over the effects of rail traffic on renewal costs. In the Swedish context, we find that the inclusion of marginal track renewal costs in the track access pricing regime, which currently only reflects marginal maintenance costs, would add substantially to the existing track access charge. EU legislation requires that access charges reflect the ‘costs directly incurred as a result of operating the train service’, which should include a marginal renewal cost component. This change would also increase the cost recovery ratio of the Swedish infrastructure manager, thus meeting a policy objective of the national government.     

Evaluation of CO2 emissions from railway resurfacing maintenance activities

This paper is the world first to investigate the CO₂ impact of railway resurfacing in ballasted track bed maintenance. Railway resurfacing is an important routine maintenance activity that restores track geometry to ensure safety, reliability and utility of the asset. This study consisted of an extensive field data collection from resurfacing machineries (diesel-engine tamping machines, ballast regulators and ballast stabilisers) including travel distances, working distances, fuel consumption and construction methodologies. Fuel consumption was converted to a kg CO₂/m using the embodied energies of diesel. Analyses showed that tamping machines emitted the highest CO₂ emissions of the resurfacing machineries, followed by ballast regulators and ballast stabilisers respectively. Tamping machines processed 4.25 m of track per litre of diesel, ballast regulators processed 6.51 m of track per litre of diesel and ballast stabilisers processed 10.61 m of track per litre of diesel. The results were then compared to previous studies and a rigorous parametric study was carried out to consider long-term resurfacing CO₂ emissions on Australian railway track. The outcome of this study is unprecedented and it enables track engineers and construction managers to critically plan strategic rail maintenance and to develop environmental-friendly policies for track geometry and alignment restoration.     

Environmental rail charges in Europe: a review

European legislation implies the use of marginal social cost pricing in rail access charges levied on rail operators. Thus, they may include specific environmental charges to internalise the impacts of rail transport. However, when applying these principles in practice, several difficulties call for second-best settings adapted to the particularities of the rail market. In this context, few European railway administrations are already implementing rail access charges with an environmental dimension. This paper reviews the literature on the issue and assesses the current European experience in noise and air pollution rail charges. For this purpose, an analytical framework is built on the definition of four basic dimensions: charging approach, allocation of abatement efforts, degree of differentiation and intermodal approach. The qualitative examination of the existing systems suggests that the level of environmental surcharges can be generally increased given the low substitutability between rail and road and that the range of abatement possibilities should be enlarged by further differentiating charges. It is also found that the pricing scope should be adapted to achieve particular cost-efficient allocations of abatement efforts among rail operators and upstream agents. Finally, further research requirements for a quantitative assessment are defined.     

Principal components analysis and track quality index: A machine learning approach

Track geometry data exhibits classical big data attributes: value, volume, velocity, veracity and variety. Track Quality Indices-TQI are used to obtain average-based assessment of track segments and schedule track maintenance. TQI is expressed in terms of track parameters like gage, cross-level, etc. Though each of these parameters is objectively important but understanding what they collectively convey for a given track segment often becomes challenging. Several railways including passenger and freight have developed single indices that combines different track parameters to assess overall track quality. Some of these railways have selected certain parameters whilst dropping others. Using track geometry data from a sample mile track, we demonstrate how to combine track geometry parameters into a low dimensional form (TQI) that simplifies the track properties without losing much variability in the data. This led us to principal components. To validate the use of principal components as TQI, we employed a two-phase approach. First phase was to identify a classic machine learning technique that works well with track geometry data. The second step was to train the identified machine learning technique on the sample mile-track data using combined TQIs and principal components as defect predictors. The performance of the predictors were compared using true and false positive rates. The results show that three principal components were better at predicting defects and revealing salient characteristics in track geometry data than combined TQIs even though there were some correlations that are potentially useful for track maintenance.     

Evaluation of the policies in British local transport plans with regard to the promotion of rail freight

Over the last couple of decades there has been a trend in Western Europe and North America towards making the railway industry more able to compete successfully with road for freight haulage through deregulation and/or structural change. This trend has been drive, partly, by a concern to produce more commercially viable railway industries, but also by concerns to reduce the environmental impacts of road haulage through modal shift. The latter in particular has led to the development of public policies supportive of rail freight, particularly at the national or international levels. This paper reports on qualitative research that analysed public policy aimed at promoting rail freight in Britain but, unusually, the focus was on local rather than national policy. The research was an investigation of the approach of local authorities to the encouragement of rail freight as evidenced through their Local Transport Plans. The paper concludes that in Britain there has been a significant amount of local policymaking for rail freight and that although national policy matters are of overriding importance, the role of local policy is significant and can be developed further.     

Field investigation and parametric study of greenhouse gas emissions from railway plain-line renewals

Railway transportation is becoming increasingly important in many parts of the world for mass transport of passengers and freight. This study was prompted by the industry’s need to systemically estimate greenhouse gas emissions from railway construction and maintenance activities. In this paper, the emphasis is placed on plain-line railway maintenance and renewal projects. The objective of this study was to reduce the uncertainties and assumptions of previous studies based on ballasted track maintenance and renewal projects. A field-based data collection was carried out on plain-line ballasted track renewals. The results reveal that the emissions from the materials contribute more than nine times the CO₂-e emissions than the machines used in the renewal projects. The results show that extending the lifespan of rail infrastructure assets through maintenance is beneficial in terms of reducing CO₂-e emissions. Analysis was then carried out using the field data. Then the results were compared to two ballastless track alternatives. The results show that CO₂-e emissions per metre from ballasted track were the least overall, however, the maintenance CO₂-e emissions are greater than those of ballastless tracks over the infrastructure lifespan, with ballasted track maintenance emitting more CO₂-e emissions at the 30 and 60 year intervals and the end of life when compared to the ballastless track types. The outcome of the study can provide decision makers, construction schedulers, environmental planners and project planners with reasonably accurate GHG emission estimates that can be used to plan, forecast and reduce emissions for plain-line renewal projects.     

Scheduling freight trains traveling on complex networks

In the US, freight railways are one of the major means to transport goods from ports to inland destinations. According to the Association of American Railroad’s study, rail companies move more than 40% of the nation’s total freight. Given the fact that the freight railway industry is already running without much excess capacity, better planning and scheduling tools are needed to effectively manage the scarce resources, in order to cope with the rapidly increasing demand for railway transportation. This research develops optimization-based approaches for scheduling of freight trains. Two mathematical formulations of the scheduling problem are first introduced. One assumes the path of each train, which is the track segments each train uses, is given and the other one relaxes this assumption. Several heuristics based on mixtures of the two formulations are proposed. The proposed algorithms are able to outperform two existing heuristics, namely a simple look-ahead greedy heuristic and a global neighborhood search algorithm, in terms of railway total train delay. For large networks, two algorithms based on the idea of decomposition are developed and are shown to significantly outperform two existing algorithms.     

Rail freight efficiency and competitiveness in Australia

In 1994/95, the Australian rail freight task was approximately 100 billion tonne kilometres (btkm). This freight task included some 37 btkm for the haulage of iron ore in Western Australia, 28 btkm for coal haulage in Queensland and New South Wales and about 16 btkm for interstate rail freight. This paper mainly concerns how improvements can be made to the efficiency and competitiveness of interstate rail freight services through the upgrading of sections of mainline track that currently have severe speed‐weight restrictions. Recent improvements in rail freight efficiency are discussed, with emphasis on two indicators: average unit revenues (cents per net tonne km), and average energy efficiency (net tonne km per MJ). Rail freight efficiency is high for the Western Australia iron‐ore operations, Queensland coal operations and Adelaide‐Perth general freight operations. However, between Australia's three largest cities of Melbourne, Sydney and Brisbane, some 36% of the mainline track fails to meet basic fast freight train standards with a ruling grade of 1 in 66 and no curve radius less than 800 m. The contraints on efficient rail freight operations imposed by severe terrain, and how the effects of terrain may be reduced by improved track alignment, are discussed. Some economically warranted rail track investment measures are outlined, including those identified for a National Transport Planning Taskforce. These measures have the potential to reduce liquid fuel use by over 250 million litres a year. Factors affecting competitive neutrality between road and rail freight that are outside of the present scope of Australia's National Competition Policy are broadly considered. These factors include the extensive upgrading of the National Highway System with full Federal funding, and low levels of road cost recovery from heavy trucks operating over long distances.