Influence of priority taking and abstaining at single-lane roundabouts using cellular automata

Existing roundabout simulation models fail to consider all types of driver behavior which compromises their accuracy and ability to accurately evaluate roundabout performance. Further, these non-compliant driver behaviors, including priority taking and priority abstaining, are inconsistent with existing traffic flow theories. In this paper, a new cellular automata model, C.A.Rsim, is developed and calibrated with field data from five single-lane roundabouts in four northeastern states. Model results indicate that approximately 20% of the individuals in the driver population are inclined to priority taking and approximately 20% are inclined to priority abstaining behavior, though the observed levels of these types of behavior are naturally lower and vary with traffic volume. The model results also corroborate other research indicating that current models can overestimate capacity at higher circulating volumes, possibly a result of the jamming effect produced by priority taking behavior. The reduction in priority abstaining behavior, which is observed at older roundabouts, significantly reduces delay and queue length in certain traffic volumes. C.A.Rsim is also more parsimonious than many existing microsimulation models. These results provide insight on how variations in conflicting flow (i.e., traffic volume and turning movement balance) impact the amount of observed non-compliant behavior.     

Noise level in the vicinity of signalized roundabouts

The analysis, assessment and estimation of noise levels in the vicinity of intersections is a more complex problem than a similar analysis for roads and streets. This is due to the varied geometry of the intersections, differences in the loads of individual movements, participation of heavy vehicles and mass transport vehicles, as well as the various types of traffic management and traffic control. This article analyses the influence of intersection type and traffic characteristics on the noise levels in the vicinity of classic channelized intersections with signalization, roundabouts and signalized roundabouts. Based on the conducted measurements, it has been established that, with comparable traffic parameters and the same distance from the geometric centre of the intersection, the L_Aeq value for signalized roundabouts is 2.5–10.8 dB higher in comparison to classic channelized intersections with signalization and 3.3–6.7 dB higher in relations to the analysed roundabout. Additionally the differences between L_Aeq levels at individual entries at the same signalized roundabouts may reach the value of approximately 4.5 dB. Such situation is influenced by differences in the intersection geometry, diameter of the intersection’s central island, traffic flow type, traffic management at the entries and traffic volume, especially the amount and traffic movements of multiple axle heavy vehicles. These factors have been analysed in detail in relation to signalized roundabouts in this paper.     

A model for evaluating the environmental and functional benefits of “innovative” roundabouts

This study looks at the singling out of a multi-parameter criterion for choosing conventional or innovative roundabout layouts, by taking functional, environmental and economic aspects into consideration. The performances of three conventional roundabouts (with different lane number at entries and through the ring), turbo-roundabouts and roundabouts with right-turn bypass lane on all the arms (flower roundabouts) have been compared in terms of vehicle delays and pollutant (carbon dioxide, nitrogen oxides, particle pollution (PM₁₀ and PM_2.5)) emissions. By means of closed-form capacity models and with the help of COPERT IV^© software, several traffic simulations have been carried out, referred to yearly peak flow values Q_max and ranging between 1300 and 3300 veh/h, starting from a typical annual traffic demand curve in urban areas. The estimation of cumulative vehicle delays and annual pollutant emissions, together with construction and maintenance costs has allowed working out overall costs for each roundabout under consideration, depending on the traffic demand. Thus, the proposed model allows finding the most cost-effective geometric solution as to overall costs for a comprehensive case record of traffic values.     

Environmental,functional and economic criteria for comparing “target roundabouts” with one- or two-level roundabout intersections

The article describes a criterion based on functional, environmental and economic aspects for comparing conventional roundabouts with innovative one- or two-level roundabouts. We compared the performances of eight roundabout types, differing in geometric layout, number of lanes and traffic flow regulation from each other, with regard to vehicle delays and CO₂, NO_x, PM_2.5 and PM₁₀ pollutant emissions. Recently-designed roundabouts – target roundabouts and flyover roundabouts – have also been studied for their undoubted practical interest. By means of closed-form capacity models and CORINAIR methodology, several traffic simulations were carried out to examine a typical annual traffic demand curve in a suburban context, three different distribution test matrices for traffic flows (ρ1, ρ2, ρ3) and maximum annual traffic flow values Q_max ranging between 1300 and 3300 veh/h.Estimating vehicle delays and annual pollutant emissions, along with construction and management costs, allowed obtaining overall costs for each roundabout examined, in function of traffic demand and several other parameters. Thanks to these analyses, we identified the roundabout types which best suit to each traffic condition.     

Dynamic vehicular delay comparison between a police-controlled roundabout and a traffic signal

Effects of queues on motorists during rush hours are severe at intersections controlled by roundabouts. Traffic police are frequently used in order to optimize the traffic flow and to control queue length at such intersections. However, the question as to how efficient such system is, compared with traffic signal, is not clear from the dynamic delay point of view. In this study a criterion is being developed based on vehicular delays as the motorist join the queues and cross the stop-line. The adopted method avoids oversimplification of reality and prevents unrealistic assumptions. The data required for the study were mainly collected through video filming technique. The results, for a given set of geometric and traffic characteristics, indicate that both a police-controlled roundabout and a traffic signal act in a similar manner in terms of vehicular delay at a certain critical value. This critical value is considered to be the point of intersection between the curves representing traffic signal and roundabout on a delay–space diagram for the vehicles as they join the tail end of the queue until they cross the stop-line. Beyond the critical value, the effect of delays and buildup of queues at roundabouts will be excessive, compared to traffic signals. Before the critical value the delays at traffic signals are quite high compared to roundabouts. The study will assist the concerned authorities to operate the existing conditions, particularly the roundabouts, more efficiently. It will also be beneficial for the traffic planners and policy makers in making judicious decisions regarding control type at intersections.     

“互联网+”交通信号辅助优化机制探索

为优化城市道路交通信号控制方法,本文结合交通信号控制系统建设发展现状,分析当前各大城市交通信号控制系统普遍存在的问题,立足于互联网环境下的浮动车数据,提出基于互联网平台大数据的交通信号控制辅助优化机制。研究发现可利用互联网路口拥堵报警数据及时有效发现问题路口,利用路段拥堵指数及路口交通流参数变化趋势辅助评估配时方案的优化效果,并通过成都市应用实例证明该机制适用于当前交通控制场景需求,可有效辅助交通信号优化工作,是传统交通模式向真正智能交通模式过渡的阶梯。     

Identification of emission hotspots in roundabouts corridors

This study describes a methodology to quantify and characterize the vehicular emissions of functionally interdependent roundabouts at a corridor level. Corridor segments include those upstream of each roundabout, the circulating area, downstream of the roundabout as well as midblock sub-segments between adjacent roundabouts. The main purpose of the study is to identify the locations along the corridors where emissions tend to be consistently high. These locations are termed “Emission Hotspots”. The methodology is applied to four existing roundabout corridors in San Diego (California) and Avon (Colorado) in the United States, and in Mealhada and Chaves (Portugal). An extensive sample of second-by-second speed traces is available for these four corridors with roundabouts.The analysis shows that when roundabouts are fairly spaced and have similar geometric design features, no significant differences are observed between emissions of roundabouts located in the corridor. In such cases, the downstream sub-segments are the emission hotspots both in absolute terms (overall contribution on total emissions is higher than 34%) and per unit distance (22% higher than the average corridor value). When roundabouts are unequally spaced the highest emissions hotspots (more than 9% above the average corridor value) are found at the circulating area sub-segments. The results also demonstrate that the entry deflection angle has a slight impact on the spatial distribution of emissions especially in the case of closely spaced roundabouts.     

Development of a delay model for unsignalized intersections applicable to traffic assignment

Abstract

This paper develops a model for estimating unsignalized intersection delays which can be applied to traffic assignment (TA) models. Current unsignalized intersection delay models have been developed mostly for operational purposes, and demand detailed geometric data and complicated procedures to estimate delay. These difficulties result in unsignalized intersection delays being ignored or assumed as a constant in TA models.

Video and vehicle license plate number recognition methods are used to collect traffic volume data and to measure delays during peak and off-peak traffic periods at four unsignalized intersections in the city of Tehran, Iran. Data on geometric design elements are measured through field surveys. An empirical approach is used to develop a delay model as a function of influencing factors based on 5- and 15-min time intervals. The proposed model estimates delays on each approach based on total traffic volumes, rights-of-way of the subject approach and the intersection friction factor. The effect of conflicting traffic flows is considered implicitly by using the intersection friction factor. As a result, the developed delay model guarantees the convergence of TA solution methods.

A comparison between delay models performed using different time intervals shows that the coefficients of determination, R ², increases from 43.2% to 63.1% as the time interval increases from 5- to 15-min. The US Highway Capacity Manual (HCM) delay model (which is widely used in Iran) is validated using the field data and it is found that it overestimates delay, especially in the high delay ranges.     

Using vehicle simulations to understand strategies for accommodating oversize,overweight vehicles at roundabouts

There is considerable evidence that roundabouts are the safest and most efficient form of traffic control for most intersections. The potential use of roundabouts with all their inherent benefits may be greatly diminished if they are not able to accommodate oversize/overweight (OSOW) vehicles, sometimes called “Superloads.” The problem, therefore, is how to accommodate OSOW vehicles without sacrificing the integrity, safety and other benefits of roundabouts.This study uses TORUS software to design six standard roundabouts using guidance from the latest Federal Highway Administration (FHWA) roundabout guide. Six OSOW check vehicles from the Wisconsin Department of Transportation’s library were used to modify the designs to accommodate these selected check vehicles at the roundabouts. These six OSOW check vehicles were used to conduct swept path analysis using AutoTURN software at the selected six standard roundabouts for right turn, through, and left turn simulations. The space requirements for these maneuvers were analyzed in detail. Various strategies for better accommodating these OSOW check vehicles were suggested and experimented with in this study using AutoTURN software simulations. The effectiveness of using a straight passage through the center island for OSOW vehicles was also addressed in this study and was found to be effective. All the strategies investigated in this study proved to be effective in accommodating OSOW vehicles when compared to conventional ways of using a roundabout. The needed total truck apron was calculated and used as a reference to determine an effective strategy for accommodating OSOW vehicles. This research can be used as guidance for transportation engineers, planners and decision makers to determine possible ways of designing a roundabout at an intersection where certain OSOW vehicles are expected.     

A discussion on the parameters of Cowan M3 distribution for Turkey

In recent years, Cowan M3 distribution model started to be used widely around the world by traffic engineers and researchers for capacity and performance analysis of roundabouts and unsignalized intersections. However, some differences between the usage and application in different countries are observed. This is mainly because of the difference between drivers’ behaviors. In this study, the present applications of Cowan M3 distribution and its parameters are discussed and more appropriate parameters that will define Turkish drivers’ behavior are searched.     

An optimization method for sustainable traffic control in urban areas

The optimization of traffic signalization in urban areas is formulated as a problem of finding the cycle length, the green times and the offset of traffic signals that minimize an objective function of performance indices. Typical approaches to this optimization problem include the maximization of traffic throughput or the minimization of vehicles’ delays, number of stops, fuel consumption, etc. Dynamic Traffic Assignment (DTA) models are widely used for online and offline applications for efficient deployment of traffic control strategies and the evaluation of traffic management schemes and policies. We propose an optimization method for combining dynamic traffic assignment and network control by minimizing the risk of potential loss induced to travelers by exceeding their budgeted travel time as a result of deployed traffic signal settings, using the Conditional Value-at-Risk model. The proposed methodology can be easily implemented by researchers or practitioners to evaluate their alternative strategies and aid them to choose the alternative with less potential risk. The traffic signal optimization procedure is implemented in TRANSYT-7F and the dynamic propagation and route choice of vehicles is simulated with a mesoscopic dynamic traffic assignment tool (DTALite) with fixed temporal demand and network characteristics. The proposed approach is applied to a reference test network used by many researchers for verification purposes. Numerical experiments provide evidence of the advantages of this optimization method with respect to conventional optimization techniques. The overall benefit to the performance of the network is evaluated with a Conditional Value-at-Risk Analysis where the optimal solution is the one presenting the least risk for ‘guaranteed’ total travel times.     

基于贝叶斯网络模型的交通状态预测

城市的交通状态是可以预测的。有效的交通状态预测能优化交通状态,减少交通阻塞。贝叶斯网络(Bayesian Networks,BN)是目前不确定知识和推理领域最有效的理论模型之一。文章在综合考虑交通阻塞成因的基础上构建网络模型,在已有的交通状态数据的基础上提出基于贝叶斯法则的学习算法,并通过计算变量间的条件概率来计算交通阻塞发生的可能性,达到预测的目的。     

Extracting accurate location information from a highly inaccurate traffic accident dataset: A methodology based on a string matching technique

The objective of this research was to develop a model for validating traffic accident locations that would be applicable worldwide, regardless of linguistic or cultural differences. In order to achieve this, a Volunteered Geographic Information (VGI) dataset was used, the OpenStreetMap (OSM) project. To test the developed model, a total of 8550 accidents with fatal or non-fatal injuries that occurred in the City of Zagreb from 2010 to 2014 were evaluated. Traffic accident data was collected using the pen-and-paper method while the traffic accident locations were determined using Global Positioning System (GPS) receivers embedded within police vehicles. This form of data entry invariably introduces errors in both geometric and contextual attributes. To fully counteract these errors, the developed model consists of two key concepts: the Jaro–Winkler string matching technique and the Inverse Distance Weighting method. Over 66% of traffic accident locations were validated, which is an increase of 15% when compared to the classical approach. The model outlined in this paper shows a significant improvement in estimating the correct location of traffic accidents. This in turn results in a drastic decrease in resources needed to estimate the quality of accident locations.     

Optimization method of alternate traffic restriction scheme based on elastic demand and mode choice behavior

As a countermeasure to urban traffic congestion, alternate traffic restriction (ATR) involves a certain proportion of automobiles being prohibited from entering pre-determined ATR districts during specific time periods. The present study introduces an optimization method for ATR schemes in terms of both their restriction districts and the proportion of restricted automobiles. As a Stackelberg game between traffic policy makers and road users, the ATR scheme optimization problem is established using a bi-level programming model, with the upper-level examining an ATR scheme aimed at consumers’ surplus maximization under the condition of overload flow minimization, and the lower-level synthetically optimizing elastic demand, mode choice (private car, public transit and park-and-ride) and multi-class user equilibrium assignment. A genetic algorithm based on the graph theory is also proposed to solve the bi-level programming model with a gradient project algorithm for solving the lower-level model. To our knowledge, this study represents the first attempt to theoretically optimize an ATR scheme using a systematic approach with mathematical model specification.     

如何建立多商业中心模式解决城市交通问题

文章对城市交通拥堵及其解决措施进行了探讨,为优化单商业中心城市交通资源使用,缓解城市交通拥堵,提出建立多个次级商业中心的设想和实现方式。并建立简单模型对单商业中心模式与多商业中心模式进行比较分析,证明从解决交通问题的角度考虑,城市采取多商业中心模式优于单商业中心模式。     

System dynamics of urban traffic based on its parking-related-states

The urban parking and the urban traffic systems are essential components of the overall urban transportation structure. The short-term interactions between these two systems can be highly significant and influential to their individual performance. The urban parking system, for example, can affect the searching-for-parking traffic, influencing not only overall travel speeds in the network (traffic performance), but also total driven distance (environmental conditions). In turn, the traffic performance can also affect the time drivers spend searching for parking, and ultimately, parking usage. In this study, we propose a methodology to model macroscopically such interactions and evaluate their effects on urban congestion.The model is built on a matrix describing how, over time, vehicles in an urban area transition from one parking-related state to another. With this model it is possible to estimate, based on the traffic and parking demand as well as the parking supply, the amount of vehicles searching for parking, the amount of vehicles driving on the network but not searching for parking, and the amount of vehicles parked at any given time. More importantly, it is also possible to estimate the total (or average) time spent and distance driven within each of these states. Based on that, the model can be used to design and evaluate different parking policies, to improve (or optimize) the performance of both systems.A simple numerical example is provided to show possible applications of this type. Parking policies such as increasing parking supply or shortening the maximum parking duration allowed (i.e., time controls) are tested, and their effects on traffic are estimated. The preliminary results show that time control policies can alleviate the parking-caused traffic issues without the need for providing additional parking facilities. Results also show that parking policies that intend to reduce traffic delay may, at the same time, increase the driven distance and cause negative externalities. Hence, caution must be exercised and multiple traffic metrics should be evaluated before selecting these policies.Overall, this paper shows how the system dynamics of urban traffic, based on its parking-related-states, can be used to efficiently evaluate the urban traffic and parking systems macroscopically. The proposed model can be used to estimate both, how parking availability can affect traffic performance (e.g., average time searching for parking, number of cars searching for parking); and how different traffic conditions (e.g., travel speed, density in the system) can affect drivers ability to find parking. Moreover, the proposed model can be used to study multiple strategies or scenarios for traffic operations and control, transportation planning, land use planning, or parking management and operations.     

A macroscopic theory for unsignalized intersections

The following paper presents a dynamic macroscopic model for unsignalized intersections which accounts for time-limited disruptions in the minor stream flow, even in free-flow conditions when the average flow demand is satisfied. It introduces a deterministic fictive traffic light to represent an average alternating sequence of available and busy time periods for insertion depending on the major stream flow. Two allocation schemes of the total outflow during green periods are developed to model the influence or non-influence of the minor stream over the major stream flow. The aggregation of the resulting dynamic flow variations gives relevant capacity values. Moreover, the model predicts accurate average vehicle delay and queue length estimates compared to theoretical and empirical data. It has three easy-to-measure parameters and can be integrated into a dynamic macroscopic simulation tool for urban networks.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Limited priority merge at unsignalized intersections

The development of a new gap acceptance model based on limited priority for the major stream is discussed. Field observations were carried out to identify the mechanism of the merging process taking place at unsignalized intersections under congested conditions. It was found that the major stream headways were increased due to the merging vehicles, particularly at high flows. A limited priority system is proposed based on the assumption that the major stream vehicles would be slightly delayed to accommodate the minor stream vehicles. Equations for capacity in the limited priority system are presented assuming the major stream vehicles to have a bunched exponential headway distribution and the minor stream drivers to be both consistent and homogeneous. The gap acceptance model based on the limited priority was then applied to the performance of roundabouts. It was found that the limited priority merge can have a significant effect on the entry capacity at two-lane roundabouts. A near linear relationship between the entry capacity and the circulating stream flow at two-lane roundabouts was identified which was similar to the empirical results from the UK. ©     

A methodology to control urban traffic noise under the constraint of environmental capacity: A case study of a double-decision optimization model

This paper presents a novel methodology to control urban traffic noise under the constraint of environmental capacity. Considering the upper limits of noise control zones as the major bottleneck to control the maximum traffic flow is a new idea. The urban road network traffic is the mutual or joint behavior of public self-selection and management decisions, so is a typical double decision optimization problem.The proposed methodology incorporates theoretically model specifications. Traffic noise calculation model and traffic assignment model for O–D matrix are integrated based on bi-level programming method which follows an iterated process to obtain the optimal solution. The upper level resolves the question of how to sustain the maximum traffic flow with noise capacity threshold in a feasible road network. The user equilibrium method is adopted in the lower layer to resolve the O–D traffic assignment.The methodology has been applied to study area of QingDao, China. In this illustrative case, the noise pollution level values of optimal solution could satisfy the urban environmental noise capacity constraints. Moreover, the optimal solution was intelligently adjusted rather than simply reducing the value below a certain threshold. The results indicate that the proposed methodology is feasible and effective, and it can provide a reference for a sustainable development and noise control management of the urban traffic.