Vehicle identification sensor models for origin–destination estimation

The traditional approach to origin–destination (OD) estimation based on data surveys is highly expensive. Therefore, researchers have attempted to develop reasonable low-cost approaches to estimating the OD vector, such as OD estimation based on traffic sensor data. In this estimation approach, the location problem for the sensors is critical. One type of sensor that can be used for this purpose, on which this paper focuses, is vehicle identification sensors. The information collected by these sensors that can be employed for OD estimation is discussed in this paper. We use data gathered by vehicle identification sensors that include an ID for each vehicle and the time at which the sensor detected it. Based on these data, the subset of sensors that detected a given vehicle and the order in which they detected it are available. In this paper, four location models are proposed, all of which consider the order of the sensors. The first model always yields the minimum number of sensors to ensure the uniqueness of path flows. The second model yields the maximum number of uniquely observed paths given a budget constraint on the sensors. The third model always yields the minimum number of sensors to ensure the uniqueness of OD flows. Finally, the fourth model yields the maximum number of uniquely observed OD flows given a budget constraint on the sensors. For several numerical examples, these four models were solved using the GAMS software. These numerical examples include several medium-sized examples, including an example of a real-world large-scale transportation network in Mashhad.     

The treatment of uncertainty in the dynamic origin–destination estimation problem using a fuzzy approach

Regardless of existing types of transportation and traffic model and their applications, the essential input to these models is travel demand, which is usually described using origin–destination (OD) matrices. Due to the high cost and time required for the direct development of such matrices, they are sometimes estimated indirectly from traffic measurements recorded from the transportation network. Based on an assumed demand profile, OD estimation problems can be categorized into static or dynamic groups. Dynamic OD demand provides valuable information on the within-day fluctuation of traffic, which can be employed to analyse congestion dissipation. In addition, OD estimates are essential inputs to dynamic traffic assignment (DTA) models. This study presents a fuzzy approach to dynamic OD estimation problems. The problems are approached using a two-level model in which demand is estimated in the upper level and the lower level performs DTA via traffic simulation. Using fuzzy rules and the fuzzy C-Mean clustering approach, the proposed method treats uncertainty in historical OD demand and observed link counts. The approach employs expert knowledge to model fitted link counts and to set boundaries for the optimization problem by defining functions in the fuzzification process. The same operation is performed on the simulation outputs, and the entire process enables different types of optimization algorithm to be employed. The Box-complex method is utilized as an optimization algorithm in the implementation of the approach. Empirical case studies are performed on two networks to evaluate the validity and accuracy of the approach. The study results for a synthetic network and a real network demonstrate the robust performance of the proposed method even when using low-quality historical demand data.     

The estimation of a time-dependent OD trip table with vehicle trajectory samples

Abstract

In this paper we discuss a dynamic origin–destination (OD) estimation problem that has been used for identifying time-dependent travel demand on a road network. Even though a dynamic OD table is an indispensable data input for executing a dynamic traffic assignment, it is difficult to construct using the conventional OD construction method such as the four-step model. For this reason, a direct estimation method based on field traffic data such as link traffic counts has been used. However, the method does not account for a logical relationship between a travel demand pattern and socioeconomic attributes. In addition, the OD estimation method cannot guarantee the reliability of estimated results since the OD estimation problem has a property named the ‘underdetermined problem.’ In order to overcome such a problem, the method developed in this paper makes use of vehicle trajectory samples with link traffic counts. The new method is applied to numerical examples and shows promising capability for identifying a temporal and spatial travel demand pattern.     

Some comments on origin–destination matrix estimation

Estimation of origin–destination (O–D) matrices from link count data is considered. This problem is challenging because the number of parameters to be estimated is typically larger than the number of network links. As a result, it is (usually) impossible to identify a unique optimal estimate of the O–D matrix from mean link traffic counts. However, information from the covariance matrix of link count data collected over a sequence of days can relieve this problem of indeterminacy. This fact is illustrated through a simple example. The use of second-order statistical properties of the data in O–D matrix estimation is then explored, and a class of estimators proposed. Practical problems of model mis-specification are discussed and some avenues for future research outlined.     

Origin-destination pattern estimation based on trajectory reconstruction using automatic license plate recognition data

Origin-destination (OD) pattern estimation is a vital step for traffic simulation applications and active urban traffic management. Many methods have been proposed to estimate OD patterns based on different data sources, such as GPS data and automatic license plate recognition (ALPR) data. These data can be used to identify vehicle IDs and estimate their trajectories by matching vehicles identified by different sensors across the network. OD pattern estimation using ALPR data remains a challenge in real-life applications due to the difficulty in reconstructing vehicle trajectories. This paper proposes an offline method for historical OD pattern estimation based on ALPR data. A particle filter is used to estimate the probability of a vehicle’s trajectory from all possible candidate trajectories. The initial particles are generated by searching potential paths in a pre-determined area based on the time geography theory. Then, the path flow estimation process is conducted through dividing the reconstructed complete trajectories of all detected vehicles into multiple trips. Finally, the OD patterns are estimated by adding up the path flows with the same ODs. The proposed method was implemented on a real-world traffic network in Kunshan, China and verified through a calibrated microscopic traffic simulation model. The results show that the MAPEs of the OD estimation are lower than 19%. Further investigation shows that there exists a minimum required ALPR sampling rate (60% in the test network) for accurately estimating the OD patterns. The findings of this study demonstrate the effectiveness of the proposed method in OD pattern estimation.     

A dynamic linear model for the estimation of time‐varying origin–destination matrices from link counts

We propose a dynamic linear model (DLM) for the estimation of day‐to‐day time‐varying origin–destination (OD) matrices from link counts. Mean OD flows are assumed to vary over time as a locally constant model. We take into account variability in OD flows, route flows, and link volumes. Given a time series of observed link volumes, sequential Bayesian inference is applied in order to estimate mean OD flows. The conditions under which mean OD flows may be estimated are established, and computational studies on two benchmark transportation networks from the literature are carried out. In both cases, the DLM converged to the unobserved mean OD flows when given sufficient observations of traffic link volumes despite assuming uninformative prior OD matrices. We discuss limitations and extensions of the proposed DLM. Copyright © 2017 John Wiley & Sons, Ltd.     

Bayesian inference for day-to-day dynamic traffic models

There is significant current interest in the development of models to describe the day-to-day evolution of traffic flows over a network. We consider the problem of statistical inference for such models based on daily observations of traffic counts on a subset of network links. Like other inference problems for network-based models, the critical difficulty lies in the underdetermined nature of the linear system of equations that relates link flows to the latent path flows. In particular, Bayesian inference implemented using Markov chain Monte Carlo methods requires that we sample from the set of route flows consistent with the observed link flows, but enumeration of this set is usually computationally infeasible.We show how two existing conditional route flow samplers can be adapted and extended for use with day-to-day dynamic traffic. The first sampler employs an iterative route-by-route acceptance–rejection algorithm for path flows, while the second employs a simple Markov model for traveller behaviour to generate candidate entire route flow patterns when the network has a tree structure. We illustrate the application of these methods for estimation of parameters that describe traveller behaviour based on daily link count data alone.     

Statistical inference on transit route‐level origin–destination flows using automatic passenger counter data

We consider inferring transit route‐level origin–destination (OD) flows using large amounts of automatic passenger counter (APC) boarding and alighting data based on a statistical formulation. One critical problem is that we need to enumerate the OD flow matrices that are consistent with the APC data for each bus trip to evaluate the model likelihood function. The OD enumeration problem has not been addressed satisfactorily in the literature. Thus, we propose a novel sampler to avoid the need to enumerate OD flow matrices by generating them recursively from the first alighting stop to the last stop of the bus route of interest. A Markov chain Monte Carlo (MCMC) method that incorporates the proposed sampler is developed to simulate the posterior distributions of the OD flows. Numerical investigations on an operational bus route under a realistic OD structure demonstrate the superiority of the proposed MCMC method over an existing MCMC method and a state‐of‐the‐practice method. Copyright © 2015 John Wiley & Sons, Ltd.     

Fine-grained OD estimation with automated zoning and sparsity regularisation

Given a road network, a fundamental object of interest is the matrix of origin destination (OD) flows. Estimation of this matrix involves at least three sub-problems: (i) determining a suitable set of traffic analysis zones, (ii) the formulation of an optimisation problem to determine the OD matrix, and (iii) a means of evaluating a candidate estimate of the OD matrix. This paper describes a means of addressing each of these concerns. We propose to automatically uncover a suitable set of traffic analysis zones based on observed link flows. We then employ regularisation to encourage the estimation of a sparse OD matrix. We finally propose to evaluate a candidate OD matrix based on its predictive power on held out link flows. Analysis of our approach on a real-world transport network reveals that it discovers automated zones that accurately capture regions of interest in the network, and a corresponding OD matrix that accurately predicts observed link flows.     

Modeling origin-destination uncertainty using network sensor and survey data and new approaches to robust control

This study develops new methods for network assessment and control by taking explicit account of demand variability and uncertainty using partial sensor and survey data while imposing equilibrium conditions during the data collection phase. The methods consist of rules for generating possible origin–destination (OD) matrices and the calculation of average and quantile network costs. The assessment methodology leads to improved decision-making in transport planning and operations and is used to develop management and control strategies that result in more robust network performance. Specific contributions in this work consist of: (a) Characterization of OD demand variability, specifically with or without equilibrium assumptions during data collection; (b) exhibiting the highly disconnected nature of OD space demonstrating that many current approaches to the problem of optimal control may be computationally intractable; (c) development of feasible Monte Carlo procedures for the generation of possible OD matrices used in an assessment of network performance; and (d) calculation of robust network controls, with state-of-the-art cost estimation, for the following strategies: Bayes, p-quantile and NBNQ (near-Bayes near-Quantile). All strategies involve the simultaneous calculation of controls and equilibrium conditions. A numerical example for a moderate sized network is presented where it is shown that robust controls can provide approx. 20% cost reduction.     

Estimation of mean and covariance of peak hour origin–destination demands from day-to-day traffic counts

This paper proposes a generalized model to estimate the peak hour origin–destination (OD) traffic demand variation from day-to-day hourly traffic counts throughout the whole year. Different from the conventional OD estimation methods, the proposed modeling approach aims to estimate not only the mean but also the variation (in terms of covariance matrix) of the OD demands during the same peak hour periods due to day-to-day fluctuation over the whole year. For this purpose, this paper fully considers the first- and second-order statistical properties of the day-to-day hourly traffic count data so as to capture the stochastic characteristics of the OD demands. The proposed model is formulated as a bi-level optimization problem. In the upper-level problem, a weighted least squares method is used to estimate the mean and covariance matrix of the OD demands. In the lower-level problem, a reliability-based traffic assignment model is adopted to take account of travelers’ risk-taking path choice behaviors under OD demand variation. A heuristic iterative estimation-assignment algorithm is proposed for solving the bi-level optimization problem. Numerical examples are presented to illustrate the applications of the proposed model for assessment of network performance over the whole year.     

Cellpath: Fusion of cellular and traffic sensor data for route flow estimation via convex optimization

A new convex optimization framework is developed for the route flow estimation problem from the fusion of vehicle count and cellular network data. The issue of highly underdetermined link flow based methods in transportation networks is investigated, then solved using the proposed concept of cellpaths for cellular network data. With this data-driven approach, our proposed approach is versatile: it is compatible with other data sources, and it is model agnostic and thus compatible with user equilibrium, system-optimum, Stackelberg concepts, and other models. Using a dimensionality reduction scheme, we design a projected gradient algorithm suitable for the proposed route flow estimation problem. The algorithm solves a block isotonic regression problem in the projection step in linear time. The accuracy, computational efficiency, and versatility of the proposed approach are validated on the I-210 corridor near Los Angeles, where we achieve 90% route flow accuracy with 1033 traffic sensors and 1000 cellular towers covering a large network of highways and arterials with more than 20,000 links. In contrast to long-term land use planning applications, we demonstrate the first system to our knowledge that can produce route-level flow estimates suitable for short time horizon prediction and control applications in traffic management. Our system is open source and available for validation and extension.     

Simultaneous estimation of an origin–destination matrix and link choice proportions using traffic counts

A procedure for the simultaneous estimation of an origin–destination (OD) matrix and link choice proportions from OD survey data and traffic counts for congested network is proposed in this paper. Recognizing that link choice proportions in a network change with traffic conditions, and that the dispersion parameter of the route choice model should be updated for a current data set, this procedure performs statistical estimation and traffic assignment alternately until convergence in order to obtain the best estimators for both the OD matrix and link choice proportions, which are consistent with the survey data and traffic counts.Results from a numerical study using a hypothetical network have shown that a model allowing θ to be estimated simultaneously with an OD matrix from the observed data performs better than the model with a fixed predetermined θ. The application of the proposed model to the Tuen Mun Corridor network in Hong Kong is also presented in this paper. A reasonable estimate of the dispersion parameter θ for this network is obtained.     

Estimation of mean and covariance of stochastic multi-class OD demands from classified traffic counts

This paper proposes a new model to estimate the mean and covariance of stochastic multi-class (multiple vehicle classes) origin–destination (OD) demands from hourly classified traffic counts throughout the whole year. It is usually assumed in the conventional OD demand estimation models that the OD demand by vehicle class is deterministic. Little attention is given on the estimation of the statistical properties of stochastic OD demands as well as their covariance between different vehicle classes. Also, the interactions between different vehicle classes in OD demand are ignored such as the change of modes between private car and taxi during a particular hourly period over the year. To fill these two gaps, the mean and covariance matrix of stochastic multi-class OD demands for the same hourly period over the year are simultaneously estimated by a modified lasso (least absolute shrinkage and selection operator) method. The estimated covariance matrix of stochastic multi-class OD demands can be used to capture the statistical dependency of traffic demands between different vehicle classes. In this paper, the proposed model is formulated as a non-linear constrained optimization problem. An exterior penalty algorithm is adapted to solve the proposed model. Numerical examples are presented to illustrate the applications of the proposed model together with some insightful findings on the importance of covariance of OD demand between difference vehicle classes.     

Origin-destination matrices estimation model using automatic vehicle identification data and its application to the Han-Shin expressway network

The Automatic Vehicle Identification (AVI) system was recently installed in expressway networks in Japan. License plate numbers of passing vehicles are monitored through roadside AVI cameras and then recognized. This paper shows the formulation of origin and destination (OD) matrices estimation model using the observed data with the AVI system. The results of license plate matching between a pair of AVI cameras are involved as the input variables. The formulated model is a least squares model and yields to the linear transformation of the partly observed OD matrices. The model is applied to the Kobe corridor line in the Han-Shin expressway network. It is found that the estimated OD matrix is consistent with the one using the previous mail survey. The proposed estimation method is expected to investigate the day-to-day fluctuations of OD patterns in the expressway network.     

Travel time estimation from sparse floating car data with consistent path inference: A fixed point approach

Estimation of urban network link travel times from sparse floating car data (FCD) usually needs pre-processing, mainly map-matching and path inference for finding the most likely vehicle paths that are consistent with reported locations. Path inference requires a priori assumptions about link travel times; using unrealistic initial link travel times can bias the travel time estimation and subsequent identification of shortest paths. Thus, the combination of path inference and travel time estimation is a joint problem. This paper investigates the sensitivity of estimated travel times, and proposes a fixed point formulation of the simultaneous path inference and travel time estimation problem. The methodology is applied in a case study to estimate travel times from taxi FCD in Stockholm, Sweden. The results show that standard fixed point iterations converge quickly to a solution where input and output travel times are consistent. The solution is robust under different initial travel times assumptions and data sizes. Validation against actual path travel time measurements from the Google API and an instrumented vehicle deployed for this purpose shows that the fixed point algorithm improves shortest path finding. The results highlight the importance of the joint solution of the path inference and travel time estimation problem, in particular for accurate path finding and route optimization.     

Simplified transport models based on traffic counts

Having accepted the need for the development of simpler and less cumbersome transport demand models, the paper concentrates on one possible line for simplification: estimation of trip matrices from link volume counts. Traffic counts are particularly attractive as a data basis for modelling because of their availability, low cost and nondisruptive character. It is first established that in normal conditions it may be possible to find more than one trip matrix which, when loaded onto a network, reproduces the observed link volumes. The paper then identifies three approaches to reduce this underspecification problem and produce a unique trip matrix consistent with the counts. The first approach consists of assuming that trip-making behaviour can be explained by a gravity model whose parameters can be calibrated from the traffic counts. Several forms of this gravity model have been put forward and they are discussed in Section 3. The second approach uses mathematical programming techniques associated to equilibrium assignment problems to estimate a trip matrix in congested areas. This method can also be supplemented by a special distribution model developed for small areas. The third approach relies on entropy and information theory considerations to estimate the most likely trip matrix consistent with the observed flows. A particular feature of this group is that they can include prior, perhaps outdated, information about the matrix.These three approaches are then compared and their likely areas for application identified. Problems for further research are discussed and finally an assessment is made of the possible role of these models vis-a-vis recent developments in transport planning.     

Real-time queue length estimation for congested signalized intersections

How to estimate queue length in real-time at signalized intersection is a long-standing problem. The problem gets even more difficult when signal links are congested. The traditional input–output approach for queue length estimation can only handle queues that are shorter than the distance between vehicle detector and intersection stop line, because cumulative vehicle count for arrival traffic is not available once the detector is occupied by the queue. In this paper, instead of counting arrival traffic flow in the current signal cycle, we solve the problem of measuring intersection queue length by exploiting the queue discharge process in the immediate past cycle. Using high-resolution “event-based” traffic signal data, and applying Lighthill–Whitham–Richards (LWR) shockwave theory, we are able to identify traffic state changes that distinguish queue discharge flow from upstream arrival traffic. Therefore, our approach can estimate time-dependent queue length even when the signal links are congested with long queues. Variations of the queue length estimation model are also presented when “event-based” data is not available. Our models are evaluated by comparing the estimated maximum queue length with the ground truth data observed from the field. Evaluation results demonstrate that the proposed models can estimate long queues with satisfactory accuracy. Limitations of the proposed model are also discussed in the paper.     

A network option portfolio management framework for adaptive transportation planning

A real option portfolio management framework is proposed to make use of an adaptive network design problem developed using stochastic dynamic programming methodologies. The framework is extended from Smit’s and Trigeorgis’ option portfolio framework to incorporate network synergies. The adaptive planning framework is defined and tested on a case study with time series origin-destination demand data. Historically, OD time series data is costly to obtain, and there has not been much need for it because most transportation models use a single time-invariant estimate based on deterministic forecasting of demand. Despite the high cost and institutional barriers of obtaining abundant OD time series data, we illustrate how having higher fidelity data along with an adaptive planning framework can result in a number of improved management strategies. An insertion heuristic is adopted to run the lower bound adaptive network design problem for a coarse Iran network with 834 nodes, 1121 links, and 10 years of time series data for 71,795 OD pairs.     

Optimization models for differentiating quality of service levels in probabilistic network capacity design problems

This paper develops various chance-constrained models for optimizing the probabilistic network design problem (PNDP), where we differentiate the quality of service (QoS) and measure the related network performance under uncertain demand. The upper level problem of PNDP designs continuous/discrete link capacities shared by multi-commodity flows, and the lower level problem differentiates the corresponding QoS for demand satisfaction, to prioritize customers and/or commodities. We consider PNDP variants that have either fixed flows (formulated at the upper level) or recourse flows (at the lower level) according to different applications. We transform each probabilistic model into a mixed-integer program, and derive polynomial-time algorithms for special cases with single-row chance constraints. The paper formulates benchmark stochastic programming models by either enforcing to meet all demand or penalizing unmet demand via a linear penalty function. We compare different models and approaches by testing randomly generated network instances and an instance built on the Sioux–Falls network. Numerical results demonstrate the computational efficacy of the solution approaches and derive managerial insights.