Comparing static and dynamic threshold based control strategies

This research extends a static threshold based control strategy used to control headway variation to a dynamic threshold based control strategy. In the static strategy, buses are controlled by setting a threshold value that holds buses at a control point for a certain amount of time before allowing the bus to continue along the route. The threshold remains constant each time the bus stops at the control point. The dynamic strategy involves the same principle of holding buses at a bus stop; however, a different threshold value is chosen each time the bus holds at a control point. The results indicate that in cases where the static threshold is set equal to the scheduled headway, very low headway variation and passenger system times result; however, passengers on board the bus are penalized by extra delay on the bus while waiting at the control point. The dynamic strategy reduces the penalty to passengers delayed on-board the bus at a control point at the expense of a slight increase in overall passenger system time.The results indicate that in most cases, the tradeoff of the slight increase in waiting time for the significant decrease in on-board delay penalty makes the dynamic strategy an acceptable choice.     

Optimizing sustainable feeder bus operation considering realistic networks and heterogeneous demand

A mathematical model is developed to optimize social and fiscal sustainable operation of a feeder bus system considering realistic network and heterogeneous demand. The objective total profit is a nonlinear, mixed integer function, which is maximized by optimizing the number of stops, headway, and fare. The stops are located which maximize the ridership. The demand elasticity for the bus service is dependent on passengers' access distance, wait time, in‐vehicle time, and fare. An optimization algorithm is developed to search for the optimal solution that maximizes the profit. The modeling approach is applied to planning a bus transit system within Woodbridge, New Jersey. Copyright © 2011 John Wiley & Sons, Ltd.     

Optimal stop spacing and headway of congested transit system considering realistic wait times

Abstract

This paper revisits the classical transit scheduling problem and investigates the relationship between stop spacing and headway, considering realistic wait time and operable transit capacity. Headway and stop spacing are important determinants for planning a transit system, which influence the service level as well as the cost of operation. A mathematical model is developed, and the objective function is user travel time which is minimized by the optimized stop spacing and headway, subject to the constraints of operable fleet size and route capacity. Optimal stop spacing and headway solutions are obtained in a numerical example. Sensitivity analysis is conducted, and the effect of model parameters on user travel time is explored.     

A connected-vehicle-based dynamic control model for managing the bus bunching problem with capacity constraints

This paper describes a connected-vehicle-based system architecture which can provide more precise and comprehensive information on bus movements and passenger status. Then a dynamic control method is proposed using connected vehicle data. Traditionally, the bus bunching problem has been formulated into one of two types of optimization problem. The first uses total passenger time cost as the objective function and capacity, safe headway, and other factors as constraints. Due to the large number of scenarios considered, this type of framework is inefficient for real-time implementation. The other type uses headway adherence as the objective and applies a feedback control framework to minimize headway variations. Due to the simplicity in the formulation and solution algorithms, the headway-based models are more suitable for real-time transit operations. However, the headway-based feedback control framework proposed in the literature still assumes homogeneous conditions at all bus stations, and does not consider restricting passenger loads within the capacity constraints. In this paper, a dynamic control framework is proposed to improve not only headway adherence but also maintain the stability of passenger load within bus capacity in both homogenous and heterogeneous situations at bus stations. The study provides the stability conditions for optimal control with heterogeneous bus conditions and derives optimal control strategies to minimize passenger transit cost while maintaining vehicle loading within capacity constraints. The proposed model is validated with a numerical analysis and case study based on field data collected in Chengdu, China. The results show that the proposed model performs well on high-demand bus routes.     

Waiting time perceptions at transit stops and stations: Effects of basic amenities,gender, and security

Waiting time in transit travel is often perceived negatively and high-amenity stops and stations are becoming increasingly popular as strategies for mitigating transit riders’ aversion to waiting. However, beyond recent evidence that realtime transit arrival information reduces perceived waiting time, there is limited empirical evidence as to which other specific station and stop amenities can effectively influence user perceptions of waiting time. To address this knowledge gap, the authors conducted a passenger survey and video-recorded waiting passengers at different types of transit stops and stations to investigate differences between survey-reported waiting time and video-recorded actual waiting time. Results from the survey and video observations show that the reported wait time on average is about 1.21 times longer than the observed wait time. Regression analysis was employed to explain the variation in riders’ reported waiting time as a function of their objectively observed waiting time, as well as station and stop amenities, weather, time of the day, personal demographics, and trip characteristics. Based on the regression results, most waits at stops with no amenities are perceived at least 1.3 times as long as they actually are. Basic amenities including benches and shelters significantly reduce perceived waiting times. Women waiting for more than 10 min in perceived insecure surroundings report waits as dramatically longer than they really are, and longer than do men in the same situation. The authors recommend a focus on providing basic amenities at stations and stops as broadly as possible in transit systems, and a particular focus on stops on low-frequency routes and in less safe areas for security measures.     

Transit assignment under crowded conditions

This paper presents a transit assignment algorithm for crowded networks. Both congestion in vehicles and queuing at stations are explicitly taken into account in predicting passenger flows for a fixed pattern of origin-destination trip demands. The overflow effects due to insufficient capacity of transit lines are considered to be concentrated at transit stations, while the in-vehicle congestion effects (or discomforts) are considered to be dependent on in-vehicle passenger volume. Overflow delay at a transit station is dependent on the number of excess passengers required to wait for the next transit car. We use a logit model to determine the split between passengers that chose to wait for the next transit car and passengers that chose to board on the alternative transit lines. The proposed algorithm predicts how passenger will choose their optimal routes under both queuing and crowded conditions.     

Research contributions to managing transit service reliability

Service reliability problems are a major concern shared by transit system users and operators. Unreliable service leads to additional vehicle requirements and higher operating costs; passengers suffer increased wait time and higher travel time uncertainty, leading to a general dissatisfaction with service and the possibility of seeking other means of transport. Because of the significance of this problem, considerable research attention has been focused in recent years on developing ways to improve service reliability. This paper examines contributions which have been made to managing transit service reliability. This topic encompasses the subjects of vehicle run time, run time variation, headway variation, passenger wait time, and reliability control. Both theoretical and empirical approaches have been undertaken, and each has contributed to our knowledge in addressing the overall problem. Significant contributions to the state-of-the-art are reported and the implications on present practice are discussed.     

Investigating the impact of stochastic vehicle arrivals to optimal stop spacing and headway for a feeder bus route

Stop spacing and service frequency (i.e., the inverse of headway) are key elements in transit service planning. The trade‐offs between increasing accessibility and reducing travel time, which affect transit system performance, need to be carefully evaluated. The objective of this study is to optimize stop spacing and headway for a feeder bus route, considering the relationship between the variance of inter‐arrival time (VIAT), which yields the minimum total cost (including user and operator costs). A solution algorithm, called successive substitution, is adapted to efficiently search for the optimal solutions. In a numerical example, the developed model is applied to planning a feeder bus route in Newark, New Jersey. The results indicate that the optimal stop spacing should be longer that those suggested by previous studies where the impact of VIAT was ignored. Reducing VIAT via certain operational control strategies (i.e., holding/stop‐skipping, transit signal priority) may shorten stop spacing and improve accessibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Real-time control of buses for schedule coordination at a terminal

Recently, bus transit operators have begun to adopt technologies that enable bus locations to be tracked from a central location in real-time. Combined with other technologies, such as automated passenger counting and wireless communication, it is now feasible for these operators to execute a variety of real-time strategies for coordinating the movement of buses along their routes. This paper compares control strategies that depend on technologies for communication, tracking and passenger counting, to those that depend solely on local information (e.g., time that a bus arrived at a stop, and whether other connecting buses have also arrived). We also develop methods to forecast bus arrival times, which are most accurate for lines with long headways, as is usually the case in timed transfer systems. These methods are tested in simulations, which demonstrate that technology is most advantageous when the schedule slack is close to zero, when the headway is large, and when there are many connecting buses.     

Modeling and optimizing urban bus transit considering headway variation for cost and service reliability analysis

Due to the stochastic nature of traffic conditions and demand fluctuations, it is a challenging task for operators to maintain reliable services, and passengers often suffer from longer travel times. A failure to consider this issue while planning bus services may lead to undesirable results, such as higher costs and a deterioration in level of service. Considering headway variation at route stops, this paper develops a mathematical model to optimize bus stops and dispatching headways that minimize total cost, consisting of both user and operator costs. A Genetic Algorithm is applied to search for a cost-effective solution in a real-world case study of a bus transit system, which improves service reliability in terms of a reduced coefficient of variation of headway.     

Optimal combinations of selected tactics for public-transport transfer synchronization

Handling efficiently and effectively real-time vehicle control is of major concern of public transport (PT) operators. One related problem is on how to reduce the uncertainty of simultaneous arrivals of two or more vehicles at a transfer point. Improper or lack of certain control actions leads to have missed transfers, one of the undesirable features of the PT service. Missed transfers result in increase of passenger waiting and travel times, and of passenger frustration. This work focuses on reducing the uncertainty of missed transfers by the use of control tactics in real-time operation. The developed model improves the PT service performance by optimally increasing the number of direct transfers and reducing the total passenger travel time. This model consists of two policies built upon a combination of two tactics: holding and skip-stop/segment, where a segment is a group of stops. The implementation of the concept is performed in two steps: optimization and simulation. The optimization searches for the best combination of operational tactics. The simulation serves as a validation of the optimal results under a stochastic framework. A case in Auckland, New Zealand is used. The results show that by applying the holding-skip stop, and holding-skip segment tactics the number of direct transfers are increased by about 100% and 150%, and the total passenger travel time is reduced by 2.14% and 4.1%, respectively, compared with the no-tactic scenario. The holding-skip segment tactic results with 47% more direct transfers than the holding-skip stop tactic for short headway operation.     

Optimization of headways with stop‐skipping control: a case study of bus rapid transit system

Bus rapid transit system is designed to provide high‐quality and cost‐efficient passenger transportation services. In order to achieve this design objective, effective scheduling strategies are required. This research aims at improving the operation efficiency and service quality of a BRT system through integrated optimization of its service headways and stop‐skipping strategy. Based on cost analysis for both passengers and operation agencies, an optimization model is established. A genetic algorithms based algorithm and an application‐oriented solution method are developed. Beijing BRT Line 2 has been chosen as a case study, and the effectiveness of the optimal headways with stop‐skipping services under different demand levels has been analyzed. The results has shown that, at a certain demand level, the proposed operating strategy can be most advantageous for passengers with an accepted increase of operating costs, under which the optimum headway is between 3.5 and 5.5 min for stop‐skipping services during the morning peak hour depending on the demand with the provision of stop‐skipping services. The effectiveness of the optimal headways with stop‐skipping services is compared with those of existing headways and optimal headways without stop‐skipping services. The results show that operating strategies under the optimal headways with stop‐skipping services outperforms the other two operating strategies with respect to total costs and in‐vehicle time for passengers. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimal transit routing with partial online information

This paper studies the routing strategy in a transit network with partial online information at stops. By partial online information, we mean that the arrival time of the incoming transit vehicles is available for a subset of the lines serving a stop. To cope with the partial information assumption, a new routing strategy is proposed and closed form formulae for computing expected waiting times and line boarding probabilities are derived. The proposed strategy unifies existing hyperpath-based transit route choice models that assume either no information or full information. Like many existing models, it ensures optimality when all information is available or the headway is exponentially distributed. The problem of determining the attractive set is discussed for each of the three information cases. In particular, a new heuristic algorithm is developed to generate the attractive set in the partial information case, which will always yield a solution no worse than that obtained without any information. The paper also reveals that, when information is available, an optimal hyperpath may contain cycles. Accordingly, the cause of such cycles is analyzed, and a sufficient condition that excludes cycles from optimal hyperpaths is proposed. Finally, numerical experiments are conducted to illustrate the impact of information availability on expected travel times and transit line load distributions. Among other findings, the results suggest that it is more useful to have information on faster lines than on slower lines.     

Analyzing urban bus service reliability at the stop, route, and network levels

Improving the reliability of bus service has the potential to increase the attractiveness of public transit to current and prospective riders. An understanding of service reliability is necessary to develop strategies that help transit agencies provide better services. However, few studies have been conducted analyzing bus reliability in the metropolis of China. This paper presents an in-depth analysis of service reliability based on bus operational characteristics in Beijing. Three performance parameters, punctuality index based on routes (PIR), deviation index based on stops (DIS), and evenness index based on stops (EIS), are proposed for the evaluation of bus service reliability. Reliability involves routes, stops, punctuality, deviation, and evenness. The relationship among the three parameters is discussed using a numerical example. Subsequently, through a sampling survey of bus lines in Beijing, service reliability at the stop, route, and network levels are estimated. The effects of route length, headway, the distance from the stop to the origin terminal, and the use of exclusive bus lanes are also analyzed. The results indicate low service reliability for buses in Beijing and a high correlation between service reliability and route length, headway, distance from the stop to the origin terminal, and the provision of exclusive bus lanes.     

An activity-based approach for scheduling multimodal transit services

This paper proposes a new activity-based transit assignment model for investigating the scheduling (or timetabling) problem of transit services in multi-modal transit networks. The proposed model can be used to generate the short-term and long-term timetables of multimodal transit lines for transit operations and service planning purposes. The interaction between transit timetables and passenger activity-travel scheduling behaviors is captured by the proposed model, as the activity and travel choices of transit passengers are considered explicitly in terms of departure time choice, activity/trip chain choices, activity duration choice, transit line and mode choices. A heuristic solution algorithm which combines the Hooke–Jeeves method and an iterative supply–demand equilibrium approach is developed to solve the proposed model. Two numerical examples are presented to illustrate the differences between the activity-based approach and the traditional trip-based method, together with comparison on the effects of optimal timetables with even and uneven headways. It is shown that the passenger travel scheduling pattern derived from the activity-based approach is significantly different from that obtained by the trip-based method, and that a demand-sensitive (with uneven headway) timetable is more efficient than an even-headway timetable.     

Modeling transit technology selection in a linear transportation corridor

This paper proposes an analytical model for investigating transit technology selection problem from a perspective of transit authority. Given a transit technology alternative (e.g., metro, light rail transit, or bus rapid transit), the proposed model aims to maximize the social welfare of the transit system by determining the optimal combination of transit line length, number of stations, station location (or spacing), headway, and fare. In the proposed model, the effects of passenger demand elasticity and capacity constraint are explicitly considered. The properties of the model are examined analytically, and a heuristic solution procedure for determining the model solution is presented. By comparing the optimized social welfare for different transit technology alternatives, the optimal transit technology solution can be obtained together with critical population density. On the basis of a simple population growth rate formula, optimal investment timing of a new transit technology can be estimated. The proposed methodology is illustrated in several Chinese cities. Insightful findings are reported on the interrelation among transit technology selection, population density, transit investment cost, and transit line parameter design as well as the comparison between social welfare maximization and profit maximization regimes. Copyright © 2014 John Wiley & Sons, Ltd.     

A bi‐level programming approach — Optimal transit fare under line capacity constraints

The fare of a transit line is one of the important decision variables for transit network design. It has been advocated as an efficient means of coordinating the transit passenger flows and of alleviating congestion in the transit network. This paper shows how transit fare can be optimized so as to balance the passenger flow on the transit network and to reduce the overload delays of passengers at transit stops. A bi‐level programming method is developed to optimize the transit fare under line capacity constraints. The upper‐level problem seeks to minimize the total network travel time, while the lower‐level problem is a stochastic user equilibrium transit assignment model with line capacity constraints. A heuristic solution algorithm based on sensitivity analysis is proposed. Numerical example is used to illustrate the application of the proposed model and solution algorithm.     

Analyzing transit service reliability using detailed data from automatic vehicular locator systems

The widespread adoption of automated vehicle location (AVL) systems and automatic passenger counters (APCs) in the transit industry has opened new venues in operations and system monitoring. In 2005, Metro Transit, Minnesota, implemented AVL system and partially implemented APC technologies. To date there has been little effort to employ the collected data in evaluating transit performance. This research uses such data to assess performance issues along a cross‐town route in the Metro Transit system. We generate a series of visual and analytical analyses to predict run time, schedule adherence and reliability of the transit route at two scales: the time point segment and the route level to demonstrate ways of identifying causes of decline in reliability levels. The analytical models show that while headways are maintained, schedule revisions are needed to improve run time and schedule adherence. Finally, the analysis suggests that many scheduled stops along this route are underutilized and recommends stop consolidation as a tool to decrease variability of service through concentrating passenger demand along a fewer number of stops. Copyright © 2010 John Wiley & Sons, Ltd.     

A bi-level model for single-line rail timetable design with consideration of demand and capacity

This paper proposes a bi-level model to solve the timetable design problem for an urban rail line. The upper level model aims at determining the headways between trains to minimize total passenger cost, which includes not only the usual perceived travel time cost, but also penalties during travel. With the headways given by the upper level model, passengers’ arrival times at their origin stops are determined by the lower level model, in which the cost-minimizing behavior of each passenger is taken into account. To make the model more realistic, explicit capacity constraints of individual trains are considered. With these constraints, passengers cannot board a full train, but wait in queues for the next coming train. A two-stage genetic algorithm incorporating the method of successive averages is introduced to solve the bi-level model. Two hypothetical examples and a real world case are employed to evaluate the effectiveness of the proposed bi-level model and algorithm. Results show that the bi-level model performs well in reducing total passenger cost, especially in reducing waiting time cost and penalties. And the section loading-rates of trains in the optimized timetable are more balanced than the even-headway timetable. The sensitivity analyses show that passenger’s desired arrival time interval at destination and crowding penalty factor have a high influence on the optimal solution. And with the dispersing of passengers' desired arrival time intervals or the increase of crowding penalty factor, the section loading-rates of trains become more balanced.     

An application-oriented model of passenger waiting time based on bus departure time intervals

This paper develops an application-oriented model to estimate waiting times as a function of bus departure time intervals. Bus stops are classified into Type A and B depending on whether they are connected with urban rail transit systems. Distributions of passenger arrival rates are analyzed based on field data for Beijing. The results indicate that the best fits for the distribution of passenger arrival rates for Type A and B bus stops are the lognormal distribution and gamma distribution, respectively. By analyzing relationships between passenger arrival rates and bus departure time intervals, it is demonstrated that parameters of the passenger arrival rate distribution can be expressed by the average and coefficient of variation of bus departure time intervals in functional relationships. The validation shows that the model provides a reliable estimation of the average passenger waiting time based on readily available bus departure time intervals.