共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
汽车耐大气老化性暴露试验方法 总被引:5,自引:0,他引:5
汽车产品在使用过程中受环境因素等的综合作用将发生老化腐蚀损坏,介绍了影响汽车产品老化腐蚀的主要因素,汽车产品老化腐蚀的主要物征及耐大气环境暴露试验方法。提出了制汽车产品室外大气暴露试验方法需要考虑的问题,即暴露试验条件,试样,试验期限,投试时间,检测周期,检测注意事项和结果评价。 相似文献
3.
汽车上使用的橡胶零件有100多个。为了解汽车用橡胶在大气中的老化性能,我们进行了试验。一、汽车用橡胶的基本情况汽车上用的橡胶可分为4类。(1)耐油橡胶这类橡胶以丁腈橡胶为主。丁腈橡胶有优良的耐油性。在汽车上用它来制造密封垫及油封等与油类接触的零件。(2)普通橡胶这类橡胶以天然橡胶为主。天然橡胶有 相似文献
4.
5.
6.
7.
8.
随着汽车在安全及环保方面的发展,人们对汽车饰件在安全性及环保性方面的要求也越来越高;随着仪表板外形设计美观的要求,越来越多的仪表板采用无缝气囊门的外观设计,因此对汽车仪表板来说,一个好的仪表板不仅要有设计新颖美观的外形,舒适的手感,而且还需具有优良的老化性能及与乘客的良好相容性(优良的散发特性)。 相似文献
9.
10.
11.
Jiawei Yu Songlin Zheng Jinzhi Feng Lihui Zhao 《International Journal of Automotive Technology》2017,18(3):547-560
The generation of valid and effective test spectra from proving ground recorded load spectra is critical for automotive durability testing. Traditional methods mostly based on spectrum damage were used to select load spectra. Statistical characteristics of load spectra were taken into account, and a new load spectra determination method based on a concatenation of a multi-section minimum standard deviation spectrum (CMSD) was proposed. The CMSD spectra were created and based on proving ground recorded load spectra. Fatigue damage analyses showed that the CMSD spectra approximated the mean damage spectra and were representative of proving ground load spectra. Subsequently, the CMSD spectra were edited by applying the time correlated fatigue damage (TCFD) analysis method to generate accelerated loading spectra. The spectra editing process of the TCFD was discussed in detail. Validation of the accelerated spectra was conducted from amplitude and frequency domains. The same fatigue damage and identical spectrum properties were retained in the accelerated spectra. A vehicle 4-post testing was finally conducted where the accelerated loading spectra were applied as the target spectra. Several fatigue fracture phenomena occurred during our test, which showed good agreement with the field test. Therefore, the load spectra determination method CMSD associated with the load spectra editing method TCFD were demonstrated reasonable and practical. 相似文献
12.
13.
路面加速加载数据采集系统的设计 总被引:1,自引:0,他引:1
以自行研制的路面加速加载试验设备为研究对象,对该样机的数据采集系统进行了分析和研究。将CAN总线技术应用于该样机,构成分布式数据采集系统.对各参数多节点采集。试验过程中采用了国产便携式称重仪和该数据采集系统分别对轮胎对地压力进行实时采集,结果表明:基于CAN总线技术的路面加速加载设备数据采集系统操作简单,测量精度高。 相似文献
14.
为了研究级配类型、油石比与荷载大小对沥青混合料的抗滑性能影响及其衰变规律,基于室内试验制备了AC-13C沥青混合料车辙板试件,采用小型加速加载设备对其进行加速磨光,然后利用铺砂法和摆式摩擦系数测试仪分析其构造深度和摆值,最后基于灰关联法分析了3种不同因素对沥青混合料抗滑性能的影响程度。结果表明:沥青混合料的摆值与构造深度均随着加速加载次数的增加呈现出先急剧下降,后缓慢下降,最终趋于稳定。油石比与荷载值越大,对抗滑性能越不利。基于灰关联分析结果,级配类型对沥青混合料的抗滑性能影响程度最为显著。 相似文献
15.
In this paper, in order to save time and cost for the fatigue design and to develop the optimum approaches for accelerated
life prediction of the fillet gas welded joints, the (Δσ)R − Nf relationship was obtained from actual fatigue test data, including welding residual stress. Based on these results, the (Δσa)R − (Nf)ALP relationship derived from the method of statistical probability analysis was compared with the actual fatigue test data.
From the result, the optimum statistical distribution for the accelerated life prediction was analyzed to be the lognormal
distribution for the fillet-type, gas-welded joint. The mean accuracy of the accelerated life prediction was assessed to be
85∼95% of the actual test life at the 95% reliability level and ±15% standard deviation. Therefore, it is expected that the
accelerated life prediction will provide a useful method for determining the criterion for fatigue design and for predicting
a specific target life. 相似文献
16.
为建立新的汽车酸蚀试验方法开展了一系列的研究工作,测试了酸雨的组成和pH值,统计了降雨频率和持续时间、空气和样品温度等大量的环境参数,确认pH值、温度、湿度、紫外光谱、样品的辐照量以及样品的放置角度等关键测试参数。通过对这些环境参数的记录分析,研制出一种仿酸雨溶液和一个加速测试程序,并对一款加速老化试验装置进行了改进,使其能极好地模仿户外的酸蚀结果。 相似文献
17.
18.
针对JT 711-2008标准,补充匀加速油耗评价参数;建议用综合燃料消耗量评价时,至少要同时附上等速工况、匀加速工况油耗值及权重分配表,以使用户全面知情所购车辆的油耗特性。同时,根据实际分析营运客车在各种规定车速下的满载等速燃油消耗量权重系数与实际营运的差距,并提出建议。 相似文献
19.
汽车涂层耐老化性能的研究 总被引:2,自引:1,他引:2
对国产汽车所用210种涂层试样进行了湿热带大气环境自然曝晒试验及人工加速老化试验。试验结果表明,金属闪光漆的耐老化性能相对较好;同种涂层中试验室特制的试样比生产线上的产品耐老化性能好;人工荧光紫外/冷凝试验仅限于对紫外线敏感的涂层材料的模拟试验。探讨了影响涂层老化性能的人为因素及人工加速老化试验的局限性,提出了一些提高汽车涂层质量的建议。 相似文献
20.
小波变换和短时傅里叶变换为频域载荷谱编辑方法的主要分析工具,小波变换法分解函数及分解层数难确定和短时傅里叶变换法窗宽固定的缺陷,导致对随机载荷的分析结果存在偏差,影响载荷编辑质量。为解决此问题,基于S变换基本理论,探索S变换在载荷加速编辑领域的应用,对试验场采集的应变信号进行S变换分析提取最大幅值谱,并以此为依据提取轮心六分力信号中的损伤载荷获取加速谱。将S变换、损伤保留、小波变换和短时傅里叶变换加速谱从载荷压缩量、损伤保留比例、功率谱密度、统计参数、穿级计数和疲劳仿真等方面进行对比分析。研究结果表明:基于S变换最大幅值谱可准确识别原始信号中的小损伤载荷;保留相同损伤保留量前提下,S变换加速谱的压缩效率最高且统计参数误差最小;S变换编辑法可将原始载荷时间压缩46.67%,同时加速谱的疲劳分析误差仅为2.2%,可获得与原始载荷相同的分析结果;S变换编辑法在疲劳分析效率和分析精度方面优于损伤保留、小波变换和短时傅里叶变换编辑法;该方法适用于汽车零部件疲劳耐久性分析。 相似文献