Rigid moorings in shallow water: A wave power application. Part I: Experimental verification of methods

Experimental work carried out at 1:60 scale in a wave flume assessed the pitch motion and anchor loading of 3 articulated tower installations in 50 m water depth while being exposed to north Atlantic storms with H_s of 15.2 m and T_p of 18.4 s. The three installations differ only in that their mass and buoyancy characteristics provide a natural period in pitch at equilibrium of 13 s, 20 s and 34 s respectively. It is verified that the dominant behaviour can be simulated by a relatively simple mathematical model, allowing the critical parameters of peak anchor loads and pitch angles to be calculated and extrapolated to full scale. It is demonstrated from the experimental and simulation results that the mass characteristics of a non surface piercing tower can be used to offset some of the challenges of moving to shallow water. If done correctly, it is possible to keep horizontal anchor loads under control and reduce vortex-induced transverse loading at the expense of increased pitch motions. Overall, the use of articulated tower installations in water depths of 50 m would appear to be technically feasible, even in exposed areas. The limitations on the size of such structures and the consequences of the resulting pitch accelerations and induced anchor loads are the subject of further study. It is proposed that the model verified herein can be used to further assess their potential at delivering viable wave power position mooring systems.     

变密度深水中的内波向水面的垂直传播

本文探讨了内波向上传播的衰减形式和处于海洋深处潜艇兴起的内波有无可能被微波探测到的问题.旨在将自航体内波的研究与星载(机载)合成孔径雷达(SAR)的微波探测联系起来,供潜艇非声探测和SAR制造单位参考.     

超低频雷达反演海洋内波波长和振幅

利用超低频雷达探测海洋内波是海洋内波探测的新方法,该方法使用1Hz～100Hz频段的电磁波探测海洋内波并反演得到内波振幅和波长等参数.根据超低频电磁波在海水中、海气界面和内波界面处的传播特性以及海洋内波水下结构特点,建立了超低频雷达反演海洋内波振幅、波长模型,并分析了探测的回波信号,仿真结果表明,使用超低频雷达可以反演得到内波振幅和波长.     

Residual stress distributions in ship hull specimens

This paper provides an in-depth study of residual stress distributions found in stiffened steel plate structures, such as those typically used in ship hulls. The effect of stiffener spacing on the distribution of residual stress components was studied. The welding heat input was also varied between high and moderate to study the effect of heat input level on residual stress distributions. Four specimens, resembling typical stiffened steel plate structures used in ship hulls were built and tested. Steel plates of 9.5 mm thickness were stiffened by welding L127 × 76 × 9.5 steel angles. The test was completed using the neutron diffraction method. The three normal components of residual stress were obtained in this study. It was found that a lower heat input results in higher tensile residual stress and that there exists a critical stiffener spacing somewhere beyond 250 mm that creates a maximum tensile residual stress value near the welded connection.     

基于Creator/Vega的合成孔径雷达图像仿真

合成孔径雷达（SAR）成像以飞机或卫星为平台,且以全天候,全天时,可全透性等优点获取高分辨率图像,已经成为国内外研究热点,特别在军事领域有着广泛的应用前景.论文研究了合成孔径雷达成像仿真原理以及其成像仿真系统框架结构,以及地形场景模型的构建与RCS材质映射,最后通过Vega中的RadarWorks模块来模拟合成孔径雷达成像仿真,通过设置合理的参数,能够较好的仿真出真实的合成孔径雷达图像.     

CO2 air–sea disequilibrium and preformed alkalinity in the Pacific and Indian oceans calculated from subsurface layer data

This work estimates new regionalized empirical parameterizations for preformed alkalinity (A_T^o) and the CO₂ air–sea disequilibrium (?C_dis). Both are key terms for the computation of anthropogenic CO₂ in the back-calculation methods. Data from the subsurface layer (75–180 m depth range) covering an area from North to South and from 19°E to 67.5°W (Pacific and Indian oceans) were taken from GLODAP (The Global Ocean Data Analysis Project) database. The subsurface layer is proved as a reliable reference for representing the main characteristics of the different water masses of the oceans. Besides, handing data from the two ocean basins altogether makes the new parameterizations of A_T^o and ?C_dis to be more globally consistent. Nevertheless, each ocean basin, at least in some regions, has different oceanographic characteristics based on its proper dynamical processes and water masses formation. In order to maintain each ocean basin ‘identity’ the whole domain was divided in six different regions (two of them sharing waters from Pacific and Indian oceans) and parameterizations in each region for both terms were obtained. Previously, data were transformed into a grid of 4°lat. × 5°lon. and the results obtained from the parameterizations were visualized and compare with pCO₂ climatologies. From the comparisons with previous ?C_dis estimations good results are obtained showing the reliability and robustness of the new regionalized empiric parameterizations.     

单向不规则波群的实验室模拟和分析

文章基于改进的波包谱经验公式,建议了单向不规则波群的数值模拟方法,模拟实例表明,只要给定波要素及描述波浪群性的高度特征参数和长度特征参数,即可通过此波包谱方便地模拟出同时满足给定高度和长度两方面群性特征要求的不规则波群.在此基础上,给出了在水槽指定位置处产生不规则波群的造波板控制信号计算方法,在实验室成功地模拟了同时满...     

Experimental and numerical modelling of ductile crack propagation in large-scale shell structures

This paper presents a combined experimental–numerical procedure for development and calibration of macroscopic crack propagation criteria in large-scale shell structures. A novel experimental set-up is described in which a mode-I crack can be driven 400 mm through a 20(+) mm thick plate under fully plastic and controlled conditions. The test specimen can be deformed either in combined in-plane bending and extension or in pure extension. Experimental results are described for 5 and 10 mm thick aluminium and steel plates. By performing an inverse finite-element analysis of the experimental results where the simulated crack growth is forced to correspond to the experimental observations, empirical criteria for ductile crack propagation emerge very clearly. Using the experiments with edge crack specimens (ECS) in combined in-plane bending and extension, crack propagation criteria are developed for steel and aluminium plates, mainly as curves showing the critical element deformation versus the shell element size. These derived crack propagation criteria are then validated against a separate set of experiments considering centre crack specimens (CCS) which have a different crack-tip constraint. The applicability of the often-used equivalent strain criterion is discussed versus a more rationally based criterion which takes into account the stress tri-axiality. A large-scale grounding experiment is also simulated showing very good agreement with measurements. The performance of the proposed model is in general good and it is believed that the presented results and experimental–numerical calibration procedure can be of use in practical finite-element simulations of collision and grounding events with the use of shell elements. As discussed, the paper provides a clean framework for further development of macroscopic crack propagation criteria in large-scale plate structures.     

Tests on ultimate strength of hull box girders made of high tensile steel

The experimental results of the collapse of three box girders subjected to pure bending moment are presented. The structures are made of high tensile steel of 690 MPa of nominal yield stress reinforced with bar stiffeners of the same material. The moment curvature curves are presented covering the pre- and post-collapse regions. The modes of collapse for each box girder are discussed considering the variation on the panel's slenderness. The concept of efficiency of high tensile steel structures is introduced. The concept is very useful to identify the governing parameters affecting the ultimate strength of 3D structures under predominant bending moment.     

Estimation of air–sea CO2 fluxes in the Bay of Biscay based on empirical relationships and remotely sensed observations

An empirical algorithm has been developed to compute the sea surface CO₂ fugacity (fCO₂^sw) in the Bay of Biscay from remotely sensed sea surface temperature (SST_RS) and chlorophyll a (chl a_RS) retrieved from AVHRR and SeaWiFS sensors, respectively. Underway fCO₂^sw measurements recorded during 2003 were correlated with SST_RS and chl a_RS data yielding a regression error of 0.1 ± 7.5 µatm (mean ± standard deviation). The spatial and temporal variability of air–sea fCO₂ gradient (ΔfCO₂) and air–sea CO₂ flux (FCO₂) was analyzed using remotely sensed images from September 1997 to December 2004. An average FCO₂ of ? 1.9 ± 0.1 mol m^? 2 yr^? 1 characterized the Bay of Biscay as a CO₂ sink that is suffering a significant long-term decrease of 0.08 ± 0.05 mol m^? 2 yr^? 2 in its capacity to store atmospheric CO₂. The main parameter controlling the long-term variability of the CO₂ uptake from the atmosphere was the air–sea CO₂ transfer velocity (57%), followed by the SST_RS (10%) and the chl a_RS (2%).     

Synoptic transects on the distribution of trace elements (Hg,Pb, Cd,Cu, Ni,Zn, Co,Mn, Fe,and Al) in surface waters of the Northern- and Southern East Atlantic

Surface seawater samples were taken in the framework of the GEOTRACES program on “POLARSTERN” expedition ANT XXIII/1 in the Eastern Atlantic in 2005 to study the distribution of the trace elements Hg (mercury), Pb (lead), Cd (cadmium), Cu (copper), Ni (nickel), Zn (zinc), Co (cobalt), Mn (manganese), Fe (iron), and Al (aluminium). With the exception of Hg, results were compared to earlier datasets from 1989 to 1990. The particulate fraction averaged over the transect was calculated to be 49% for Cd, 23% for Mn and 50% for Fe indicating a release of these TEI's (trace elements and their isotopes) from a leachable SPM fraction in the stored and acidified samples.Total Pb concentrations ranged between 5 and 20 pmol kg^? 1 in 2005 with highest values in the ITCZ (intertropical convergence zone). In 1989 Pb concentrations were twice as high in the region of the ITCZ, while by a factor of 10–15 higher values were obtained in the North Atlantic.Total Cd and Co are dominated, by different seasonal upwelling regimes (Equatorial upwelling, Guinea Dome, Angola Dome).Total Cu, Ni, Fe, Mn and Al show nearly identical concentrations in 1990 and 2005. For total manganese and aluminium strong maxima (3–4 nmol kg^? 1 and 55 nmol kg^? 1 respectively) are observed between 23°N and 0°, while the Fe maximum (6–9 nmol kg^? 1) is located at 7°N. Total Hg concentrations ranged between 0.5 and 4.5 pmol kg^? 1.     

Mass and heat transports in the NE Barents Sea: Observations and models

The strait between Novaya Zemlya and Frans Josef Land, here called the Barents Sea Exit (BSX) is investigated using data obtained from a current-meter array deployed in 1991–1992, and two numerical models (ROMS and NAME). Combining the observations and models the net volume flux towards the Arctic Ocean was estimated to 2.0 ± 0.6 Sv (1 Sv = 10⁶ m³s^? 1). The observations indicate that about half of this transport consists of dense, Cold Bottom Water, which may penetrate to great depths and contribute to the thermohaline circulation. Both models give quite similar net transport, seasonal variations and spatial current structures, and the discrepancies from the observations were related to the coarse representation of the bottom topography in the models. Also the models indicate that actual deployment did not capture the main in- and outflows through the BSX. A snapshot of the hydrographic structure (CTD section) indicates that both models are good at reproducing the salinity. Nevertheless, they react differently to atmospheric cooling, although the same meteorological forcing was applied. This may be due to the different parameterisation of sea ice and that tides were included in only one of the models (ROMS). Proxies for the heat transport are found to be small at the BSX, and it can not be ruled out that the Barents Sea is a heat sink rather than a heat source for the Arctic Ocean.     

Numerical and experimental investigations into the application of response conditioned waves for long-term nonlinear analyses

The coefficient of contribution method, in which the extreme response is determined by considering only the few most important sea states, is an efficient way to do nonlinear long-term load analyses. To furthermore efficiently find the nonlinear short-term probability distributions of the vessel responses in these sea states, response conditioned wave methods can be used. Several researchers have studied the accuracy of response conditioned wave methods for this purpose. However, further investigations are necessary before these can become established tools. In this paper we investigate the accuracy by comparing the short-term probability distributions obtained from random irregular waves with those from response conditioned waves. We furthermore show how response conditioned wave methods can be fitted into a long-term response analysis. The numerical and experimental investigations were performed using a container vessel with a length between perpendiculars of 281 m. Numerical simulations were done with a nonlinear hydroelastic time domain code. Experiments were carried out with a flexible model of the vessel in the towing tank at the Marine Technology Centre in Trondheim. The focus was on the probability distributions of the midship vertical hogging bending moments in the sea states contributing most to the hogging moments with a mean return period of 20 years and 10 000 years. We found that the response conditioned wave methods can very efficiently be used to accurately determine the nonlinear short-term probability distributions for rigid hulls, but either accuracy or efficiency is to a large effect lost for flexible hulls, when slamming induced whipping responses are accounted for.     

基于两种转换函数的真实波浪参数的统计分析（英文）

The probability distributions of wave characteristics from three groups of sampled ocean data with different significant wave heights have been analyzed using two transformation functions estimated by non-parametric and parametric methods. The marginal wave characteristic distribution and the joint density of wave properties have been calculated using the two transformations, with the results and accuracy of both transformations presented here. The two transformations deviate slightly between each other for the calculation of the crest and trough height marginal wave distributions, as well as the joint densities of wave amplitude with other wave properties. The transformation methods for the calculation of the wave crest and trough height distributions are shown to provide good agreement with real ocean data. Our work will help in the determination of the most appropriate transformation procedure for the prediction of extreme values.     

Numerical simulation of flow around a smooth circular cylinder at very high Reynolds numbers

High Reynolds number flows (Re = 1 × 10⁶, 2 × 10⁶ and 3.6 × 10⁶, based on the free stream velocity and cylinder diameter) covering the supercritical to upper-transition flow regimes around a two-dimensional (2D) smooth circular cylinder, have been investigated numerically using 2D Unsteady Reynolds-Averaged Navier–Stokes (URANS) equations with a standard high Reynolds number k ? ? turbulence model. The objective of the present study is to evaluate whether the model is applicable for engineering design within these flow regimes. The results are compared with published experimental data and numerical results. Although the k ? ? model is known to yield less accurate predictions of flows with strong anisotropic turbulence, satisfactory results for engineering design purposes are obtained for high Reynolds number flows around a smooth circular cylinder in the supercritical and upper-transition flow regimes, i.e. Re > 10⁶. This is based on the comparison with published experimental data and numerical results.     

Development and lipid storage in Calanus euxinus from the Black and Marmara seas: Variabilities due to habitat conditions

Oil sac volume, gonad size and moulting patterns were investigated in the copepod Calanus euxinus inhabiting deep and shallow zones of the Black Sea and penetrating into the Marmara Sea. In summer the C. euxinus population in deep layers of the Black Sea was dominated by pre-diapause and diapausing postmoult copepodite stage V (CV) with small sexually undifferentiated gonads and mean lipid content of 14.1 ± 6.0% of body volume. The lipid content of deep-living females was 7.2 ± 4.2% of body volume. At the same time, intermoult and premoult CV with enlarged gonads and low lipid content (7.7 ± 5.1% of body volume) and females with oil sac volume of 1.4 ± 1.0% were found at shallow stations. Premoult CV with oil volume of 0.6 ± 0.8% and mature females with little visual evidence of substantial lipid storage dominated in the Marmara Sea. The differences in moulting patterns and oil sac volumes of C. euxinus from deep zones and shallow regions suggest that vertical migrations to the oxygen minimum zone (OMZ) are necessary for formation of large lipid reserves providing high reproductive potential of this species. On the basis of an energy balance model it was shown that under low phytoplankton concentration of about 30 μg C l^− 1 preadults and adults migrating to the OMZ could accumulate lipids (up to 5% of body energy content daily), in contrast to copepods constrained to shallow oxic water columns of the Black Sea and from the Marmara Sea.     

Density-dependent effects on seston dynamics and rates of filtering and biodeposition of the suspension-cultured scallop Chlamys farreri in a eutrophic bay (northern China): An experimental study in semi-in situ flow-through systems

Effects of stocking density on seston dynamics and filtering and biodeposition by the suspension-cultured Zhikong scallop Chlamys farreri Jones et Preston in a eutrophic bay (Sishili Bay, northern China), were determined in a 3-month semi-field experiment with continuous flow-through seawater from the bay. Results showed that the presence of the scallops could strongly decrease seston and chlorophyll a concentrations in the water column. Moreover, in a limited water column, increasing scallop density could cause seston depletion due to scallop's filtering and biodeposition process, and impair scallop growth. Both filtration rate and biodeposition rate of C. farreri showed significant negative correlation with their density and positive relationship with seston concentration. Calculation predicts that the daily removal of suspended matter from water column by the scallops in Sishili Bay ecosystem can be as high as 45% of the total suspended matter; and the daily production of biodeposits by the scallops in early summer in farming zone may amount to 7.78 g m^− 2, with daily C, N and P biodeposition rates of 3.06 × 10^− 1, 3.86 × 10^− 2 and 9.80 × 10^− 3 g m^− 2, respectively. The filtering and biodeposition by suspension-cultured scallops could substantially enhance the deposition of total suspended particulate material, suppress accumulation of particulate organic matter in water column, and increase the flux of C, N and P to benthos, strongly enhancing pelagic–benthic coupling. It was suggested that the filtering-biodeposition process by intensively suspension-cultured bivalve filter-feeders could exert strong top-down control on phytoplankton biomass and other suspended particulate material in coastal ecosystems. This study also indicated that commercially suspension-cultured bivalves may simultaneously and potentially aid in mitigating eutrophication pressures on coastal ecosystems subject to anthropogenic N and P loadings, serving as a eutrophic-environment bioremediator. The ecological services (e.g. filtering capacity, top-down control, and benthic–pelagic coupling) functioned by extractive bivalve aquaculture should be emphasized in coastal ecosystems.     

Benthic sediment composition and nutrient cycling in an Intermittently Closed and Open Lake Lagoon

Surfical sediments within Corunna Lake, a moderate size Intermittently Closed and Open Lake Lagoon (ICOLL), were examined for solid phase nutrient concentrations (TN, TP, TOC,) and solute exchange rates between the sediment and water column (O₂, NO₃–N, NH₄–N, FRP, and N₂). The surfical sediments in Corunna Lake contained high concentrations of TN (5 mg/g dry mass), total phosphorus (0.6 mg/g dry mass), and TOC (~ 5% dry mass). The carbon stable isotope ratio (δ¹³C) and TOC:TN ratios (δ¹³C ~ ? 24, TOC:TN ~ 11–14) demonstrated that the composition of the organic matter in the sediment was a mixture derived primarily of degraded planktonic matter. The close association between TP and Fe concentrations highlighted the potential role Fe plays in mediating Filterable Reactive Phosphorus (FRP) concentrations in the water column of Corunna Lake. In situ benthic chamber incubations were used to measure benthic fluxes. Solute exchange rates between the sediment and water column in Corunna Lake were similar to other reported studies (O₂ = ? 469 to ? 1765 µmol m^? 2 h^? 1, NH₄–N = 0.1–63 µmol m^? 2 h^? 1, NO₂/NO₃–N = 0 µmol m^? 2 h^? 1, FRP = ? 4–1.6 µmol m^? 2 h^? 1and N₂ = 12–356 µmol m^? 2 h^? 1). As more carbon was deposited and mineralized the efficiency of the bacterial population to denitrify nitrogen in the sediment decreases. The linkage between land use and benthic biogeochemistry was also explored. A dairy farm exists in the middle catchment of Corunna Lake, and the receiving bay sediment consistently demonstrated the highest oxygen consumption rates in winter and spring (? 1408 µmol m^? 2 h^? 1 in winter, ? 1691 µmol m^? 2 h^? 1 in spring) and lowest denitrification efficiencies during summer (~ 3%). Nitrate/nitrite fluxes were not observed during any of the chamber incubations, with the concentrations of nitrate/nitrite being below detection limits (< 10 μg/L). Seasonal changes influenced the rates of solute exchange between the sediment and water column. Critical measures of solute exchange for NH₄–N and biogenic N₂ indicated that seasonal temperature changes play a significant role in mediating the reaction rates of sedimentary based biogeochemical processes. Measurable FRP fluxes were small but greater in the benthic sediments which received higher carbon inputs. Sediments have a high capacity to adsorb P which is released as sediment oxygen demand increases as a result of increases in labile carbon loads.     

Modelling the ecosystem dynamics of the Barents Sea including the marginal ice zone: II. Carbon flux and interannual variability

An upgraded and revised physically–biologically coupled, nested 3D model with 4 km grid size is applied to investigate the seasonal carbon flux and its interannual variability. The model is validated using field data from the years for which the carbon flux was modelled, focussing on its precision in space and time, the adequacy of the validation data, suspended biomass and vertical export. The model appears to reproduce the space and time (± 1 week and 10 nautical miles) distribution of suspended biomass well, but it underestimates vertical export of carbon at depth. The modelled primary production ranges from 79 to 118 g C m^− 2 year^− 1 (average 93 g C m^− 2 year^− 1) between 4 different years with higher variability in the ice-covered Arctic (± 26%) than in the Atlantic (± 7%) section. Meteorological forcing has a strong impact on the vertical stratification of the regions dominated by Atlantic water and this results in significant differences in seasonal variability in primary production. The spatially integrated primary production in the Barents Sea is 42–49% greater during warm years than the production during the coolest and most ice-covered year.