货运车型标准化专项治理管理系统设计与实现

货运车型标准化是国家运输行业结构调整及货运行业提质增效发展的重要工作手段与目标。从货运车型标准化转型治理工作的功能需求出发,以正在开展的常压液体危险货物罐车治理工作为基础,本文设计并实现了基于SSM架构的货运车型标准化专项治理管理系统。危险货物道路运输企业在系统中申报罐车信息,罐车检验机构基于车辆识别代码上传罐检报告,道路运输管理机构通过对罐车信息及关键报告进行审核,给予审核结果及意见。     

Incorporating spatial interactions in zero-inflated negative binomial models for freight trip generation

This paper formulates a spatial autoregressive zero-inflated negative binomial model for freight trip productions and attractions. The model captures the following freight trip characteristics: count data type, positive trip rates, overdispersion, zero-inflation, and spatial autocorrelation. The spatial autoregressive structure is applied in the negative binomial part of the models to obtain unbiased estimates of the effects of different regressors. Further, we estimate parameters using the full information maximum likelihood estimator. We perform empirical analysis with an establishment based freight survey conducted in Chennai. Separate models are estimated for trips generated by motorised two-wheelers and three-wheelers, and pickups besides an aggregate model. Spatial variables such as road density and indicator of geolocation are insignificant in all the models. In contrast, the spatial autocorrelation is significant in all of the models except for the freight trips attracted and produced by pickups. From a policy standpoint, the elasticity results show the importance of considering spatial autocorrelation. We also highlight the bias due to aggregation of vehicle classes, based on the elasticities.

     

Shipping Lines and Logistics

Abstract

It has been acknowledged that logistics is a driving force that shapes the integration of the transport chain. This paper argues that while the liner shipping industry exhibits increased horizontal integration, its vertical integration remains limited. A clear distinction is drawn between freight logistics, container logistics and vessel logistics. Freight logistics is defined as part of the supply chain process, the focus of which is the goods being transported. The purpose of container logistics is to optimize the movements of the containers themselves, an operation that is directly related to vessel logistics which is concerned with maximizing vessel utilization. The paper demonstrates that shipping lines have to find the correct balance between these three types of logistics. Their interest in vertical integration is primarily because the management of container logistics provides direct support to vessel logistics. Their involvement in freight logistics remains unclear and uncertain.     

Public financing of private freight rail infrastructure to reduce highway congestion: A case study of public policy and decision making in the United States

As goods movement continues to increase it is expected to outpace infrastructure capacity in the United States. Moving a larger share of goods by rail rather than truck is a potentially cost effective part of a solution. Freight rail not only offers a substitute for truck trips but is a cleaner, more energy efficient, and safer alternative. Recently a number of private freight rail projects have received public funding. The public funds are aimed at increasing freight rail capacity with the goal of diverting some goods currently moved by truck to rail. While the benefits of moving goods by rail are relatively clear, it is unclear if public decision makers can effectively identify strategic rail investments that will achieve their policy goals. This study critically examines the analytical methods, models, and data that are commonly used to support decisions to provide public funds for private freight rail projects. This is accomplished through a case study of California’s Trade Corridors Improvement Fund program which provided $680 million for 11 freight rail projects. The study’s contributions include identifying critical analytical flaws and challenges affecting the benefit estimates that public funding decisions rely on. Improvements to current evaluation methods are also identified as are regulatory reforms and policy interventions that may offer more effective and reliable outcomes.     

A cost and CO2 comparison of using trains and higher capacity trucks when UK FMCG companies collaborate

Companies working in a collaboration are able to achieve higher vehicle capacity utilisation and reduced empty running, resulting in lower costs and improved sustainability through reduced emissions and congestion. Collaboration produces higher volumes of goods to be moved than individual companies which means that further efficiencies may be possible by relaxing the freight mode constraints and considering rail and higher capacity vehicles. This paper explains how real world data has been used in a model to quantify the economic and environmental benefits in the FMCG sector delivered through collaboration utilising road and rail freight modes. Data for one month was provided by 10 FMCG companies and included freight transport flows between depots and customers, inter depot movements, and supplier collections. Detailed road and rail costs and operating characteristics were obtained and, with the transport flows, applied to a network design model which was used to validate the company data sets. A strategy examining the potential use of alternative higher capacity vehicles and rail for the flows between nine regional consolidation centres showed cost and CO₂ savings. Just under half the inter-regional flows benefited from double deck trailers, longer heavier vehicles for 30% of the flows and rail with different wagon configurations for the rest. In summary there was a 23% reduction in cost with 58% fewer road kilometres and a 46% reduction in CO₂ emissions. The ability to backhaul the same mode of transport between most of the regional centres was one of the strengths of this strategy.     

Internalization of Transportation External Costs: Impact Analysis of Logistics Company Mode and Route Choices

Abstract

This study focuses on the mode and route choices of a logistics company in a situation involving intercity transportation with networks of surface roads, highways and a railway. A method of transportation network analysis is applied to construct a logistics company mode and route choice models with the objective of minimizing total distribution and external costs. This study also assumes that the fleet number and vehicle capacities are given. Freight distributed from a distribution center to given retailers or consumers via surface road/highway links or via intermodal transportation involving surface road/highway links and a railway. In terms of model construction, this study first explores the routing and sequence of the retailers and consumers served by each vehicle. Second, the study internalizes the external cost of air pollution into the total distribution cost, to analyze the influences of external cost burdens on a logistics company mode and route choices from a user charge perspective. Finally, the study designs a heuristic algorithm for solving the above models, and illuminates the modeling process using a numerical example.     

Collecting longitudinal data from freight operators: survey design and implementation ideas and challenges

Freight transport research has generally been limited by a lack of data of the breadth and quality available for passenger transport, particularly in terms of behavioural data. This paper discusses the survey design and implementation of a survey intended to collect longitudinal behavioural data on the responses of freight transport firms to environmental policies. The design of the survey is centred around a hypothetical scenario where respondents are asked how they would complete a given freight task within common constraints. One of the key components of the survey design is a dynamic component intended to simulate the changing business environment. The paper illustrates the many challenges in getting complex freight related surveys in the field.     

Evaluation of Rail Freight Facilities Grant Funding in Britain

Abstract

Rail freight has been generally in decline in many European Union countries in recent years, contrary to European transport policy. State support for railway operations is commonplace in most countries, and this paper establishes the background to targeted rail freight grant funding in Britain. Through desk‐based analysis of Freight Facilities Grant (FFG) awards, together with a survey of recipient companies, the paper assesses the extent to which the planned flows expected from these awards have materialized and it evaluates the role of the grants in influencing rail freight volumes. The evidence suggests that FFG funding has been largely successful, attracting considerable private sector investment. Overall, FFGs have played an important role in developing or retaining rail freight flows, although the processes could be made more transparent and consistent. As other European countries liberalize their rail freight markets as a result of European Union legislation, such targeted funding may be an appropriate alternative to more general government subsidy of freight operations.     

Incorporating Logistics in Freight Transport Demand Models: State-of-the-Art and Research Opportunities

Freight transport demand is a demand derived from all the activities needed to move goods between locations of production to locations of consumption, including trade, logistics and transportation. A good representation of logistics in freight transport demand models allows us to predict the effects of changes in logistics systems on future transport flows. As such it provides better estimations of the costs of interaction and allows to predict changes in spatial patterns of freight transport flows more accurately. In recent years, the attention for freight modelling has been growing and new research work has appeared aimed at incorporating logistics in freight models. In this paper we review the state of the art in the representation of logistics considerations in freight transport demand models. Our focus is on the service and cost drivers of changes in logistics networks and how these affect freight transport. Our review proceeds along a conceptual framework for modelling that goes beyond the conventional 4-step modelling approach. We identify promising areas for freight modelling that have an integrative function within this framework, such as spatial computable general equilibrium models, supply chain choice models and hypernetwork models.     

A dynamic approach to road freight flows modeling in Spain

This paper presents an innovative approach to analyzing road vehicle freight traffic that uses a dynamic panel data specification derived from a gravity model. This dynamic approach, which has recently been employed in international goods trade models in lieu of the traditional static specification, is applied to the case of Spain using data for the countrys 15 NUTS-3 regions between 1999 and 2009. Using the system general method of moments approach, we obtained significant evidence that the flow of vehicles carrying commodities by road has a strong persistence effect when controlling for unobserved heterogeneity. We also found that the quality of road transport infrastructure has a significant impact on vehicle trips. According to our findings, we suggest that this type of specification be employed in distribution models in which fixed effects and lags of the dependent variable are included to account for unobserved heterogeneity and persistence effects, respectively.     

Institutional structure of New Zealand licensed road freight carriers

Road freight transport in New Zealand has operated under government regulations since 1936, primarily to protect the freight revenue of the New Zealand Railways. In 1983 an Act was passed to deregulate the freight transport industry and to switch over to a qualitative licensing system. This is expected to have some impact on competition within the road freight industry as well as between road and rail. This paper analyses the institutional structure of the road freight industry at the pre‐deregulation phase. The trend over the last few years, shows that the number of single vehicle owners (mostly owner‐drivers) and their share in the industry is growing at a faster rate than others. The vehicle authority distribution varies widely from one region to another in the country. Economic factors like employment, population, urbanization etc. could not explain this variation. The segregation of demand by existing government regulations appears to be the main reason for such diversity in vehicle authority distribution. Apparently there is no monopoly trend in the aggregate nor in the regional distribution. However, many owner drivers work closely with large firms, which may change the concentration observed in the distribution of vehicle authorities.

Productivity is relatively high for one person operations, i.e., mainly owner drivers. It then goes down and then rises to a certain limit. This gives an indication of the possibility of economies of scale, the single vehicle firms being an exception.     

A time-dependent freight tour synthesis model

This paper introduces a model of urban freight demand that seeks to estimate tour flows from secondary data sources e.g., traffic counts, to bypass the need for expensive surveys. The model discussed in this paper, referred as Freight Tour Synthesis (FTS), enhances current techniques by incorporating the time-dependent tour-based behavior of freight vehicles, and the decision maker’s (e.g., metropolitan planning agency planner) preferences for different sources of information. The model, based on entropy maximization theory, estimates the most likely set of tour flows, given a set of freight trip generation estimates, a set of traffic counts per time interval, and total freight transportation cost in the network. The type of inputs used allows the assessment of changes in infrastructure, policy and land use. The ability of the model to replicate actual values is assessed using the Denver Region (CO) as a case study.     

Price and frequency competition in freight transportation

This paper develops a simple analytical model of price and frequency competition among freight carriers. In the model, the full price faced by a shipper (a goods producer) includes the actual shipping price plus an inventory holding cost, which is inversely proportional to the frequency of shipments offered by the freight carrier. Taking brand loyalty on the part of shippers into account, competing freight carriers maximize profit by setting prices, frequencies and vehicle carrying capacities. Assuming tractable functional forms, long- and short-run comparative-static results are derived to show how the choice variables are affected by the model’s parameters. The paper also provides an efficiency analysis, comparing the equilibrium to the social optimum, and it attempts to explain the phenomenon of excess capacity in the freight industry.     

Freight Demand Management and the Potential of Receiver-Led Consolidation programs

The paper defines the field of Freight Demand Management (FDM), and positions it as an important component of transportation policy and management. To establish the rationale for FDM, the paper studies the effects of the agent interactions at the core of supply chains, and identifies the important role played by the receivers of supplies in determining when and how deliveries are made. The paper classifies the various modalities of FDM, and summarizes the real-life experiences of their implementation. To illustrate the potential of FDM, the paper analyzes Receiver-Led Consolidation (RLC) programs. The paper provides background on consolidation programs, and estimates a behavioral model to shed light on the factors explaining receivers’ interest in cargo consolidation. The resulting model is used to estimate expected participation in a RLC program in New York City. These results are complemented with freight-trip generation analyses, and a behavioral micro-simulation to estimate potential reductions in freight traffic and vehicle-miles-traveled. The results show that RLC programs could bring significant benefits to large metropolitan areas, reducing freight vehicle-miles-traveled and congestion levels.     

Cross-boundary container truck congestion: the case of the Hong Kong-Pearl River Delta region

Ever since the Open Policy in 1979, there has been increasing socio-economic integration between Hong Kong and mainland China. The subsequent rapid export-oriented industrialization in the Hong Kong-Pearl River Delta (HK-PRD) region has given rise to rapidly growing cross-boundary container truck traffic (XBCT). From 1992 to 2003, the volume of XBCT rose from 1.5 to 4.7 million vehicles per annum. Hence, a new customs check-point, the Shenzhen Western Corridor (SWC), was built. With the development of SWC, how would XBCT drivers change their route-cum-customs (RCC) choice? What were their major considerations? How would the route choice among goods vehicle drivers differ from private car drivers? To what extent would the opening of new customs check-points change the RCC choice of goods vehicle drivers and resolve the uneven distribution problem of freight traffic? The current paper seeks to address these questions.     

The potential demand for a urban freight consolidation centre

This paper reports the results of a stated-preference study aimed at investigating how transport decisions are made by receivers or by transport operators about the potential use of an urban freight consolidation centre in the city of Fano, Italy. Because there are no revealed preference data, a stated-choice methodology is used. The stated-choice experiments present two alternatives—one using a private vehicle subject to various traffic regulations and one using the urban freight consolidation centre with varying cost and efficiency levels. Conventional discrete choice data modelling shows that the potential demand is influenced mainly by the distance of the parking bay from the shop, by access permit cost, by the service cost of the urban freight consolidation centre, and by the delay in delivery time. Simulations are then performed to assess how the potential demand is affected by various incentives and regulations affecting urban goods distribution.

Some thoughts on competitive tendering in local bus operations

Abstract

This article is derived from a report by Metra Consulting Group for the Dutch Ministry of Public Health and the Environment. The aim of Metra's study was to identify ways of reducing the environmental nuisance of urban traffic without adding excessively to transport costs.

The main theme of the article is that the traditional idea of an inherent conflict between transport efficiency and the environment is mistaken. Both efficiency and the environment are threatened by the same thing: the excessive and indiscriminate use of vehicles. This comes about because of defects in the fiscal and regulatory framework within which people take transport decisions. Suitable reforms in this framework would simultaneously enhance the environment and improve access for all classes of road user.

In the development of this theme, particular attention is paid to transport activities which tend to be neglected by policy makers, such as walking, cycling and urban goods distribution; and to measures which are not always thought of as instruments of policy at all, such as locational policy and development control, vehicle design, and vehicle taxation, especially of goods vehicles.     

Airport system planning—a U.K. study

There is growing public pressure, from environmentalist groups and others, for the imposition of lorry bans in urban areas. In the U.K. such bans have so far only been imposed as through‐route bans by small towns, such as Windsor, where the overall impact on operators and on road freight costs is limited. The Greater London Council's response to the pressure for lorry bans has been to set up a Committee of Inquiry to examine the impact of an access ban on the heaviest lorries in the London area. The proposed ban would apply to an area enclosed by the M25 orbital motorway within which vehicles above a specified gross tonnage would not be allowed to operate. A number of metropolitan authorities elsewhere in the U.K. are thought to be considering similar restrictions on lorries.

In this paper, the impact of area lorry bans on goods vehicle operating costs is discussed. It is suggested that practices based on “direct distribution” techniques may prove less costly than the operating alternatives that have been evaluated in the past which include public transhipment depots and the exclusive use of small vehicles.     

An empirical study to determine freight travel time at a major port

Abstract

This paper examines the reliability measures of freight travel time on urban arterials that provide access to an international seaport. The findings indicate that the reliability index calculated by the median of travel time, which is less sensitive to extreme values in a highly skewed distribution, is more appropriate. This paper also examines several statistical distributions of travel time to determine the best fit to the data of freight trips. The results of goodness-of-fit tests indicate that the log-logistic is the best statistical function for freight travel time during the midday off-peak period. However, the lognormal distribution represents a better fit to arterials with heavily congested traffic during peak periods. Additionally, travel time prediction models identify the relationships between travel time, speeds and other factors that affect travel time reliability. The analysis suggests that incident-induced delays and speed fluctuations primarily contributed to the unreliability of freight movement on the urban arterials.     

Investigating the market for inter-modal freight technologies

Freight carried by rail has traditionally been mainly low value bulk commodities. The market for transport of such commodities appears at best static and is forming a smaller proportion of the total demand for freight transport. There is thus an urgent need for rail operators to develop practical and cost effective inter-modal systems, which offer high quality services to consignors of consumer goods whose premises are not usually connected to the rail network. Much long-haul traffic of this type is international. In continental Europe, a number of inter-modal technologies—including swapbodies and piggyback—have long been in use. Development of similar technologies for use within the more constrained loading gauge of Great Britain, has received a great boost from the impending opening of the Channel Tunnel. The alternative technologies are discussed, before turning to ways of stimating the market for them. A large part of the paper is devoted to reporting on a computerised survey using our LASP (Leeds Adaptive Stated Preference) technique. The reason for using hypothetical Stated Preference data is the inadequate nature and extent of data on actual choice decisions, particularly in circumstances in which confidential freight rates are individually negotiated and little general merchandise goes by rail. By bringing together the results of this survey with information on costs and quality of service, the likely future market for inter-modal freight technologies is assessed. It is seen that the potential for inter-modal services within Britain is very limited, although there should be a good opportunity on the major corridor from London to Scotland through the West Midlands and the North West. When the Channel Tunnel is opened, however, the potential for services between Britain and continental Europe will be enormous, provided that an adequate quality of service can be offered.