Simulation of fixed route bus travel time

Travel time on fixed route urban bus route is discussed. Given that the travel time is a function of three basic variables, Monte Carlo procedure is used to simulate trips during a specific time interval. Each variable is assumed to have a specific probability distribution with known or estimatable parameters. It is shown that this micro-computer simulation model can be used for examining the effects of traffic management schemes, number of stops and passenger demand on travel time, and subsequently fleet size and level of service.     

Analyzing urban bus service reliability at the stop, route, and network levels

Improving the reliability of bus service has the potential to increase the attractiveness of public transit to current and prospective riders. An understanding of service reliability is necessary to develop strategies that help transit agencies provide better services. However, few studies have been conducted analyzing bus reliability in the metropolis of China. This paper presents an in-depth analysis of service reliability based on bus operational characteristics in Beijing. Three performance parameters, punctuality index based on routes (PIR), deviation index based on stops (DIS), and evenness index based on stops (EIS), are proposed for the evaluation of bus service reliability. Reliability involves routes, stops, punctuality, deviation, and evenness. The relationship among the three parameters is discussed using a numerical example. Subsequently, through a sampling survey of bus lines in Beijing, service reliability at the stop, route, and network levels are estimated. The effects of route length, headway, the distance from the stop to the origin terminal, and the use of exclusive bus lanes are also analyzed. The results indicate low service reliability for buses in Beijing and a high correlation between service reliability and route length, headway, distance from the stop to the origin terminal, and the provision of exclusive bus lanes.     

Optimal design of a short‐turning strategy considering seat availability

We develop a methodology to optimize the schedule coordination of a full‐stop service pattern and a short‐turning service pattern on a bus route. To capture the influence of bus crowding and seat availability on passengers' riding experience, we develop a Markov model to describe the seat‐searching process of a passenger and an approach to estimate the transition probabilities of the Markov model. An optimization model that incorporates the Markov model is proposed to design the short‐turning strategy. The proposed model minimizes the total cost, which includes operational cost, passengers' waiting time cost and passengers' in‐vehicle travel time cost. Algorithm is developed to produce optimal values of the decision variables. The proposed methodology is evaluated in a case study. Compared with methodologies that ignore the effect of bus crowding, the proposed methodology could better balance bus load along the route and between two service patterns, provide passengers with better riding experience and reduce the total cost. In addition, it is shown that the optimal design of the short‐turning strategy is sensitive to seat capacity. Copyright © 2016 John Wiley & Sons, Ltd.     

Optimization of a feeder-bus route design by using a multiobjective programming approach

This paper presents a feeder-bus route design model, capable of minimizing route length, minimizing maximum route travel time of planned routes, and maximizing service coverage for trip generation. The proposed model considers constraints of route connectivity, subtour prevention, travel time upper bound of a route, relationships between route layout and service coverage, and value ranges of decision variables. Parameter uncertainties are dealt with using fuzzy numbers, and the model is developed as a multiobjective programming problem. A case study of a metro station in Taichung City, Taiwan is then conducted. Next, the programming problem in the case study is solved, based on the technique for order preference by similarity to ideal solution approach to obtain the compromise route design. Results of the case study confirm that the routes of the proposed model perform better than existing routes in terms of network length and service coverage. Additionally, increasing the number of feeder-bus routes decreases maximum route travel time, increases service coverage, and increases network length. To our knowledge, the proposed model is the first bus route design model in the literature to consider simultaneously various stakeholder needs and support for bus route planners in developing alternatives for further evaluation efficiently and systematically.     

A comparison of accuracy and cost of attribute data in analysis of transit service areas using GIS

User oriented transit service is designed to meet the particular needs of a selected group of travelers. Transit Routes are located to provide convenient linkages between user's origin and destination in such a way that out-of-vehicle time, such as access and transfer time, is minimized. Planning transit routes requires understanding demographics, land use and travel patterns in an area. The dynamic nature of these systems necessitates regular review and analysis to insure that the transit system continues to meet the needs of the area it serves. Geographic Information Systems (GIS) provide a flexible framework for planning and analyzing transit routes and stops. Socioeconomic, demographic, housing, land use, and traffic data may be modeled in a GIS to identify efficient and effective corridors to locate routes. Part of the route location and analysis problem requires estimating population within the service area of a route. A route's service area is defined using walking distance or travel time. The problem of identifying service areas for park and ride or auto/bus users is not considered here, but assumed analogous to walk/bus trips. This paper investigates the accuracy and costs associated with the use of different attribute data bases to perform service area analysis for transit routes using GIS. A case study is performed for Logan, Utah, where a new fixed route service is operated. The case study illustrates the use of census data, postal data, data collected from aerial photographs, and data collected during a field survey using the network area analysis technique for transit service area analysis. This comparison allows us to describe the amount of error introduced by various spatial modeling techniques of data bases representing a variety of aggregation levels.     

Bus control strategies in corridors with signalized intersections

This paper proposes a new dynamic bus control strategy aimed at reducing the negative effects of time-headway variations on route performance, based on real-time bus tracking data at stops. In routes with high demand, any delay of a single vehicle ends up causing an unstable motion of buses and producing the bus bunching phenomena. This strategy controls the cruising speed of buses and considers the extension of the green phase of traffic lights at intersections, when a bus is significantly delayed. The performance of this strategy will be compared to the current static operation technique based on the provision of slack times at holding points. An operational model is presented in order to estimate the effects of each controlling strategy, taking into account the vehicle capacity constraint. Control strategies are assessed in terms of passenger total travel time, operating cost as well as on the coefficient of headway variation. The effects of controlling strategies are tested in an idealized bus route under different operational settings and in the bus route of highest demand in Barcelona by simulation. The results show that the proposed dynamic controlling strategy reduces total system cost (user and agency) by 15–40% as well as the coefficient of headway variation 53–78% regarding the uncontrolled case, providing a bus performance similar to the expected when time disturbance is not presented.     

The evaluation of active bus-priority signal routes

In an attempt to provide priority facilities for high occupancy vehicles, many cities have investigated or installed active bus priority signals at selected intersections. This paper describes one such installation at the intersection of Bell Street and Oriel Road in Heidelberg, Victoria, Australia. In particular, it describes the impact of the signals on bus performance levels and on non-priority traffic performance levels. An evaluation is performed taking account of the costs of the installation, the changes in the amount of fuel consumed and the changes in the perceived, budgeted delay of people passing through the intersection. Perceived, budgeted delay is defined so as to take account of the variability of delay and the perception of small delay changes. The evaluation at this site showed that, for various reasons, it was difficult to justify the priority signals at this isolated intersection.The evaluation is then extended to the concept of a route of bus priority signal intersections. A simple model is built to simulate the performance of such a priority route and the evaluation repeated. As a result of using perceived delay as a measure of performance, it is then shown that although the priority intersections along the route may not be individually justifiable, the priority route as a whole may show considerable net benefits. These benefits will occur given that there are greater than a critical number of priority intersections on the route. This critical number will depend on the assumptions made in the priority route model.It is concluded that re-evaluation of bus priority signal intersections along the lines suggested in the paper may yield a number of viable bus priority intersections and bus priority routes which were previously considered to be non-viable.     

A bi-level programming for bus lane network design

This paper proposes a bi-level programming model to solve the design problem for bus lane distribution in multi-modal transport networks. The upper level model aims at minimizing the average travel time of travelers, as well as minimizing the difference of passengers’ comfort among all the bus lines by optimizing bus frequencies. The lower level model is a multi-modal transport network equilibrium model for the joint modal split/traffic assignment problem. The column generation algorithm, the branch-and-bound algorithm and the method of successive averages are comprehensively applied in this paper for the solution of the bi-level model. A simple numerical test and an empirical test based on Dalian economic zone are employed to validate the proposed model. The results show that the bi-level model performs well with regard to the objective of reducing travel time costs for all travelers and balancing transit service level among all bus lines.     

Bus routing strategies in a transit market: A case study of Hong Kong

Conventionally, the objective of transit routing is often set either to minimize the total operational cost, subject to a given level of service quality, or to maximize the service quality at a given acceptable cost. In a deregulated, commercial‐based environment however, such as bus and railway operations in cities of the UK and Hong Kong where several private firms compete in route‐based or area‐based market, routing becomes one of the means for higher returns rather than just for cost saving. In such a case, how do the transit providers set up their routes for profit‐maximization? Will the routing based on the provider's objective meet the user's objective? How do government regulations and policies affect the choice of transit provider's routing strategy? To answer these questions, we first examine the relationship between the objectives of users and transit providers, set up criteria for transit routing quality, and then investigate the possible routing configurations/patterns for a hypothetical case. These criteria include (1) the load factor of transit, (2) the level of route directness, (3) the level of route overlapping, and (4) the total number of routes and (5) the average of route length. These measures are finally applied to a real case in Hong Kong to examine the route changes of Kowloon Motor Bus from 1975 to 1995. The result of the empirical case reveais how key measures such as load factor are controlled by the bus operator and affected by government policies and how the bus routing pattern was adjusted to meet users' need. Facing the dilemma as evident in Hong Kong between the route directness and the efficiency of road use, we suggest that a rational multi‐modal routing structure be put in place if an institutional solution is introduced so that bus and other transit modes can form a sharing program or an alliance.     

A combined destination and route choice model for a bicycle sharing system

This paper studies the supply variables that influence the destination and route choices of users of a bicycle sharing system in the Chilean city of Santiago. A combined trip demand logit model is developed whose explanatory variables represent attributes relating to the topology of the possible routes and other characteristics such as the presence of bikeways, bus service and controlled intersections. The data for the explanatory variables and system users were collected through field surveys of the routes and interviews conducted at the system stations. The results of the model show that proximity to stops on the Santiago Metro and the existence of bikeways are the main factors influencing destination and route choices. Also indicated by the model estimates are gender differences, a preference for tree-lined routes and an avoidance of routes with bus services. Finally, the outcomes reveal considerable potential for the integration of bicycle sharing systems with Metro transit.     

Towards modal choice decision-making models: A case study of Lagos state transport corporation bus riders

Identification of the socioeconomic factors which affect the demand for buses, and the analysis of the use of the other transport modes by bus users are the two main objectives of this article. Work and school trips are highlighted as being very important trip purposes in Lagos metropolis by the multiple discriminant analysis model. It identifies mode of transport, distance, travel time, reliability, and the number of stops as significant mode choice variables. Multiple linear regression models for work and school trips identify mode of transport, transfort fare, travel time, annual income, and crew behaviour as significant variables in the choice of transport mode. These findings support the two alternative hypotheses of the study that the choice of bus is related to the individual perception of the quality of service of the different modes and that socioeconomic characteristics of the riders influence the patronage of buses. The attention of policy makers for the 22 transport corporations that operate inter-and intra-urban services in all the 21 states and the federal capital of Abuja in Nigeria is drawn to the importance of these variables for decisions.     

Time of day intervals partition for bus schedule using GPS data

Time of day partition of bus operating hours is a prerequisite of bus schedule design. Reasonable partition plan is essential to improve the punctuality and level of service. In most mega cities, bus vehicles have been equipped with global positioning system (GPS) devices, which is convenient for transit agency to monitor bus operations. In this paper, a new algorithm is developed based on GPS data to partition bus operating hours into time of day intervals. Firstly, the impacts of passenger demand and network traffic state on bus operational performance are analyzed. Then bus dwell time at stops and inter-stop travel time, which can be attained based on GPS data, are selected as partition indexes. For buses clustered in the same time-of-day interval, threshold values of differences in dwell time at stops and inter-stop travel time are determined. The buses in the same time-of-day interval should have adjacent dispatching numbers, which is set as a constraint. Consequently, a partition algorithm with three steps is developed. Finally, a bus route in Suzhou China is taken as an example to validate the algorithm. Three partition schemes are given by setting different threshold values for the two partition indexes. The present scheme in practice is compared with the three proposed schemes. To balance the number of ToD intervals and partition precision, a Benefit Evaluation Index is proposed, for a better time-of-day interval plan.     

Investigating the irregularity of bus routes: highlighting how underlying assumptions of bus models impact the regularity results

A bus route is inherently unstable: when the system is uncontrolled, buses fail to maintain their time‐headways and tend to bunch. Several mathematical bus motion models were proposed to reproduce the bus behavior and assess management strategies. However, no work has established how the choice of a model impacts the irregularity of modeled bus systems, that is, the non‐respect of scheduled headways. Because of this gap, a large body of existing works assumes that the ability of these models to reproduce instability comes only from stochasticity, although the link between stochastic inputs and the level of irregularity remains unknown. Moreover, some recognized phenomena such as a change of travel conditions during a day or delays at signalized intersections are ignored. To address these shortcomings, this paper provides an overview of existing dynamic bus‐focused models and proposes a simple way to classify them. Commonly used deterministic and stochastic models are compared, which allows quantifying the relative influence of stochasticity of each model component on outputs. Moreover, we show that a change in the system equilibrium in a full deterministic system can lead to irregularity. Finally, this paper proposes a refinement of travel time models to account for non‐dynamic signals. In presence of traffic signals, we show that a bus system can be self‐regulated. Especially, these insights could help to calibrate bus model inputs to better reproduce real data. Copyright © 2014 John Wiley & Sons, Ltd.     

Joint optimization of a rail transit line and its feeder bus system

A model is developed for jointly optimizing the characteristics of a rail transit route and its associated feeder bus routes in an urban corridor. The corridor demand characteristics are specified with irregular discrete distributions which can realistically represent geographic variations. The total cost (supplier plus user cost) of the integrated bus and rail network is minimized with an efficient iterative method that successively substitutes variable values obtained through classical analytic optimization. The optimized variables include rail line length, rail station spacings, bus headways, bus stop spacings, and bus route spacing. Computer programs are designed for optimization and sensitivity analysis. The sensitivity of the transit service characteristics to various travel time and cost parameters is discussed. Numerical examples are presented for integrated transit systems in which the rail and bus schedules may be coordinated.     

International experience with speed limits during and prior to the energy crisis of 1973–4

This paper presents an artificial neural network (ANN) based method for estimating route travel times between individual locations in an urban traffic network. Fast and accurate estimation of route travel times is required by the vehicle routing and scheduling process involved in many fleet vehicle operation systems such as dial‐a‐ride paratransit, school bus, and private delivery services. The methodology developed in this paper assumes that route travel times are time‐dependent and stochastic and their means and standard deviations need to be estimated. Three feed‐forward neural networks are developed to model the travel time behaviour during different time periods of the day‐the AM peak, the PM peak, and the off‐peak. These models are subsequently trained and tested using data simulated on the road network for the City of Edmonton, Alberta. A comparison of the ANN model with a traditional distance‐based model and a shortest path algorithm is then presented. The practical implication of the ANN method is subsequently demonstrated within a dial‐a‐ride paratransit vehicle routing and scheduling problem. The computational results show that the ANN‐based route travel time estimation model is appropriate, with respect to accuracy and speed, for use in real applications.     

Modelling the dynamics of bus use in a changing travel environment using panel data

Panel data offers the potential to represent the influence on travel choices of changing circumstances, past history and persistent individual differences (unobserved heterogeneity). A four-wave panel survey collected data on the travel choices of residents before and after the introduction of a new bus rapid transit service. The data shows gradual changes to bus use over the four waves, implying time was required for residents to become aware of the new service and to adapt to it. Ordered response models are estimated for bus use over the survey period. The results show that the influence of level of service (LOS) is underestimated if unobserved heterogeneity is not taken into account. The delayed response to the new service is able to be well represented by including LOS as a lagged variable. Current bus use is found to be conditioned on past bus use, but with additional influence of lagged LOS and unobserved heterogeneity. It is shown how different model specifications generate different evolution patterns with the most realistic predictions arising from a model which takes into account lagged responses to change in LOS and unobserved heterogeneity. The paper demonstrates the feasibility of developing panel data models that can be applied to forecasting the effect of interventions in the travel environment. Longer panels—encompassing periods of both stability and change—are required to support future efforts at modelling travel choice dynamics.     

Investigating the impact of stochastic vehicle arrivals to optimal stop spacing and headway for a feeder bus route

Stop spacing and service frequency (i.e., the inverse of headway) are key elements in transit service planning. The trade‐offs between increasing accessibility and reducing travel time, which affect transit system performance, need to be carefully evaluated. The objective of this study is to optimize stop spacing and headway for a feeder bus route, considering the relationship between the variance of inter‐arrival time (VIAT), which yields the minimum total cost (including user and operator costs). A solution algorithm, called successive substitution, is adapted to efficiently search for the optimal solutions. In a numerical example, the developed model is applied to planning a feeder bus route in Newark, New Jersey. The results indicate that the optimal stop spacing should be longer that those suggested by previous studies where the impact of VIAT was ignored. Reducing VIAT via certain operational control strategies (i.e., holding/stop‐skipping, transit signal priority) may shorten stop spacing and improve accessibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Estimation of bus dwell time using univariate time series models

A significant proportion of bus travel time is contributed by dwell time for passenger boarding and alighting. More accurate estimation of bus dwell time (BDT) can enhance efficiency and reliability of public transportation system. Regression and probabilistic models are commonly used in literatures where a set of independent variables are used to define the statistical relationship between BDT and its contributing factors. However, due to technical and monetary constraints, it is not always feasible to collect all the data required for the models to work. More importantly, the contributing factors may vary from one bus route to another. Time series based methods can be of great interest as they require only historical time series data, which can be collected using a facility known as automatic vehicle location (AVL) system. This paper assesses four different time series based methods namely random walk, exponential smoothing, moving average (MA), and autoregressive integrated moving average to model and estimate BDT based on AVL data collected from Auckland. The performances of the proposed methods are ranked based on three important factors namely prediction accuracy, simplicity, and robustness. The models showed promising results and performed differently for central business district (CBD) and non‐CBD bus stops. For CBD bus stops, MA model performed the best, whereas for non‐CBD bus stops, ARIMA model performed the best compared with other time series based models. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimization Of Headway,Vehicle Size and Route Choice for Minimum Cost Feeder Service

ABSTRACT

Many people use public transportation systems to reach their destination, while others use personal vehicles. Poor transportation systems do not attract ridership. Therefore, the usage of passenger cars increases, and traffic and environmental conditions deteriorate. Efficient public transportation has been recognized as one of the potential ways of mitigating air pollution, reducing energy consumption, improving mobility and alleviating traffic congestion. The objective of this study is to optimize a bus feeder service that provides the shuttle service between a recreation center (e.g. Sandy Hook, NJ) and a major public transportation facility, subject to site-specific constraints such as vehicle schedules, bus availability, service capacity and budget. The decision variables include bus headway, vehicle size and route choice. The solution methodology integrating both analytical and numerical techniques is developed, which optimizes the decision variables. Finally, the proposed solution methodology is applied to a case study. Numerical results, including optimal solutions and sensitivity analyses, are presented while the level of coordination between the feeder service and a major transportation service is discussed.     

A stochastic multimodal reliable network design problem under adverse weather conditions

This paper formulates a network design problem (NDP) for finding the optimal public transport service frequencies and link capacity expansions in a multimodal network with consideration of impacts from adverse weather conditions. The proposed NDP aims to minimize the sum of expected total travel time, operational cost of transit services, and construction cost of link capacity expansions under an acceptable level of variance of total travel time. Auto, transit, bus, and walking modes are considered in the multimodal network model for finding the equilibrium flows and travel times. In the proposed network model, demands are assumed to follow Poisson distribution, and weather‐dependent link travel time functions are adopted. A probit‐based stochastic user equilibrium, which is based on the perceived expected travel disutility, is used to determine the multimodal route of the travelers. This model also considers the strategic behavior of the public transport travelers in choosing their routes, that is, common‐line network. Based on the stochastic multimodal model, the mean and variance of total travel time are analytical estimated for setting up the NDP. A sensitivity‐based solution algorithm is proposed for solving the NDP, and two numerical examples are adopted to demonstrate the characteristics of the proposed model. Copyright © 2014 John Wiley & Sons, Ltd.