A new method for determining wheel–rail multi-point contact

A new method for wheel–rail multi-point contact is presented in this paper. In this method, the first- and the second-order derivatives of the wheel–rail interpolation distance function and the elastic wheel–rail virtual penetration are used to determine multiple contact points. The method takes account of the yaw angle of the wheelset and allows the identification of all possible points of contact between wheel and rail surfaces with an arbitrary geometry. Static contact geometry calculations are first carried out using the developed method for both new and worn wheel profiles and with a new rail profile. The validity of the method is then verified by simulations of a coupled vehicle and track system dynamics over a small radius curve. The simulation results show that the developed method for multi-point contact is efficient and reliable enough to be implemented online for simulations of vehicle–track system dynamics.     

Dynamic performance of high-speed train passing windbreak breach under unsteady crosswind

Field test and computational fluid dynamics (CFD) method are conducted to investigate the safety of high-speed train under unsteady crosswind. Wheel–rail forces of high-speed train passing a breach between two windbreaks under strong crosswind are measured in a field test. The derailment coefficient of first wheelset of front car at the windward side reaches the allowable value. Meanwhile, the left and right of lateral wheel–rail force are in the opposite direction. This kind of phenomenon has not been tested before. Therefore, CFD and multi-body simulations are performed in order to study the phenomena. Good agreement is obtained between the simulation results and the experimental data. It is concluded that the sudden increase of transient aerodynamic loads, when the train passing the breach, is the root of this phenomenon; after running along the same direction as carbody and bogie run along the opposite direction during the high-speed train passing the windbreak breach; larger opposite longitudinal creeping forces of first wheelset compel the first wheelset to yaw toward the windward side; meanwhile, larger lateral wheel–rail forces compel the first wheelset to run toward the windward side rail; the left and right lateral wheel–rail forces become opposite because the right wheel impacts the windward side rail.     

High Speed Stability for Rail Vehicles Considering Varying Conicity and Creep Coefficients

The critical or hunting speed of solid axle rail vehicles is known to be a strong function of primary suspension stiffness, wheel/rail profile geometry (conicity and gravitational stiffness), wheel/rail friction forces (creep coefficients), bogie/carbody inertia properties, and secondary suspension design. This paper deals with the problem of maximizing the critical speed through design of the primary and secondary suspension but with control only over the range of wheel/rail geometry and friction characteristics. For example, the conicity may varie from .05 to .3 and the linear creep coefficients from 25% to 100% of the predicted Kalker values.

It is shown that the maximum critical speed is greatly limited by the wheel/rail geometry and friction variations. It is also shown that, when lateral curving and ride quality are considered, the best design approach is to select an intermediate primary longitudinal stiffness, to limit the lowest value of conicity (e.g. to .1 or .2) by wheel profile redesign, increasing the secondary yaw damping value (yaw relaxation) and optimizing the primary and secondary lateral stiffness.     

Long-term wear and rolling contact fatigue behaviour of a conformal wheel profile designed for large radius curves

There are many reasons to optimise the wheel–rail interface through redesign or maintenance. Minimising wear and rolling contact fatigue (RCF) initiation on wheels and/or rails is often at the forefront of such considerations. This paper covers the design of a conformal wheel profile and its long-term wear and RCF performance to optimise the wheel–rail interface and subsequently reduce the occurrence of surface-initiated RCF on South Africa’s iron ore export line. A comparative study is performed using multibody dynamics simulation together with numerical wheel wear and RCF predictions. The advantages of a conformal wheel profile design are illustrated by evaluating the worn shape and resulting contact conditions of the conformal design. The conformal design has a steadier equivalent conicity progression and a smaller conicity range compared with the current wheel profile design over the wheel’s wear life. The combination of a conformal wheel profile design with 2?mm hollow wear and inadequate adherence to grinding tolerances often result in two-point contact, thereby increasing the probability of RCF initiation. The conformal wheel profile design proved to have wear and potential RCF benefits compared with the current wheel profile design. However, implementation of such a conformal wheel profile must be accompanied by improved rail grinding practices to ensure rail profile compliance.     

High Speed Stability for Rail Vehicles Considering Varying Conicity and Creep Coefficients

SUMMARY

The critical or hunting speed of solid axle rail vehicles is known to be a strong function of primary suspension stiffness, wheel/rail profile geometry (conicity and gravitational stiffness), wheel/rail friction forces (creep coefficients), bogie/carbody inertia properties, and secondary suspension design. This paper deals with the problem of maximizing the critical speed through design of the primary and secondary suspension but with control only over the range of wheel/rail geometry and friction characteristics. For example, the conicity may varie from .05 to .3 and the linear creep coefficients from 25% to 100% of the predicted Kalker values.

It is shown that the maximum critical speed is greatly limited by the wheel/rail geometry and friction variations. It is also shown that, when lateral curving and ride quality are considered, the best design approach is to select an intermediate primary longitudinal stiffness, to limit the lowest value of conicity (e.g. to .1 or .2) by wheel profile redesign, increasing the secondary yaw damping value (yaw relaxation) and optimizing the primary and secondary lateral stiffness.     

Field measurements of the evolution of wheel wear and vehicle dynamics for high-speed trains

This investigation demonstrates the wheel wear evolution and related vehicle dynamics of high-speed trains with an operating distance (OD) of around two million kilometres. A long-term experimental test lasting two years was conducted to record the wheel profiles and structural vibrations of various trainsets. The wheel wear, namely the profile shape, worn distribution and wheelset conicity, is investigated for several continuous reprofiling cycles. Typical results are illustrated for the stability analysis, and the ride quality is examined with increasing OD. In addition, the vibration transition characteristics between suspensions are investigated in both the time and frequency domains. The experiments show that the dominant wear concentrates on the nominal rolling radius, and the wear rate increases with OD because of the surface softening resulting from the loss of wheel material. The vibration of structural components is aggravated by the increase of the equivalent conicity of the wheelset, which rises approximately linearly with the wheel wear and OD. High-frequency vibrations arise in the bogie and car body related to the track arrangement and wheel out-of-roundness, causing the ride comfort to worsen significantly. Additionally, the system vibration characteristics are strongly dependent on the atmospheric temperature. Summaries and conclusions are obtained regarding the wheel wear and related vehicle dynamics of high-speed trains over long operating times and distances.     

An inverse design method for rail grinding profiles

Inspired by the optimisation design method for restoration of worn wheel profiles, an inverse design method based on optimal rail grinding profiles is presented in this paper. To improve grinding quality, vehicle dynamic performance is chosen as the main criteria and rolling radii difference function is selected as the key factor (also main target function) determining dynamic performance. Grinding material to be removed is chosen as the auxiliary target aimed at extending rail service life. Besides that, wheel–rail contact distribution is also taken into consideration as an auxiliary target preventing stress concentration and fatigue growth. By introducing certain presuppositions, all the design targets will form an inverse design problem. This problem can be solved using hybrid discrete numerical methods. Considering different grinding requirements, two examples of grinding profile design for straight and curved track will be discussed. Results show that the presented method is efficient and effective. Practical implementation has been carried out at several grinding sites in China.     

A method to determine the two-point contact zone and transfer of wheel–rail forces in a turnout

A practical method to determine the zone of two contact points and the transfer of wheel–rail forces between two rails in a turnout is presented in this paper. The method is based on a wheel–rail elastic penetration assumption and used to study a turnout system for a 200 km/h high-speed railway in China. Rail profiles in a number of key sections in the turnout are identified first, and profiles in other sections are then obtained by interpolation between key sections. The track is modelled as flexible with rails and sleepers represented by beams and the interaction between the vehicle and turnout is simulated for cases of the vehicle passing the turnout. Results are mainly presented for two-point contact positions and the characteristics of the wheel–rail forces transference. It is found that the heights of the switch and crossing rail top have significant effects on the wheel–rail contact forces. Finally, the optimised top height for the crossing rails is proposed to reduce the system dynamic force in the turnout system.     

Effect of temperature- and frequency-dependent dynamic properties of rail pads on high-speed vehicle–track coupled vibrations

The soft under baseplate pad of WJ-8 rail fastener frequently used in China’s high-speed railways was taken as the study subject, and a laboratory test was performed to measure its temperature and frequency-dependent dynamic performance at 0.3?Hz and at ?60°C to 20°C with intervals of 2.5°C. Its higher frequency-dependent results at different temperatures were then further predicted based on the time–temperature superposition (TTS) and Williams–Landel–Ferry (WLF) formula. The fractional derivative Kelvin–Voigt (FDKV) model was used to represent the temperature- and frequency-dependent dynamic properties of the tested rail pad. By means of the FDKV model for rail pads and vehicle–track coupled dynamic theory, high-speed vehicle–track coupled vibrations due to temperature- and frequency-dependent dynamic properties of rail pads was investigated. Finally, further combining with the measured frequency-dependent dynamic performance of vehicle’s rubber primary suspension, the high-speed vehicle–track coupled vibration responses were discussed. It is found that the storage stiffness and loss factor of the tested rail pad are sensitive to low temperatures or high frequencies. The proposed FDKV model for the frequency-dependent storage stiffness and loss factors of the tested rail pad can basically meet the fitting precision, especially at ordinary temperatures. The numerical simulation results indicate that the vertical vibration levels of high-speed vehicle–track coupled systems calculated with the FDKV model for rail pads in time domain are higher than those calculated with the ordinary Kelvin–Voigt (KV) model for rail pads. Additionally, the temperature- and frequency-dependent dynamic properties of the tested rail pads would alter the vertical vibration acceleration levels (VALs) of the car body and bogie in 1/3 octave frequencies above 31.5?Hz, especially enlarge the vertical VALs of the wheel set and rail in 1/3 octave frequencies of 31.5–100?Hz and above 315?Hz, which are the dominant frequencies of ground vibration acceleration and rolling noise (or bridge noise) caused by high-speed railways respectively. Since the fractional derivative value of the adopted rubber primary suspension, unlike the tested rail pad, is very close to 1, its frequency-dependent dynamic performance has little effect on high-speed vehicle–track coupled vibration responses.     

Design and optimisation of wheel–rail profiles for adhesion improvement

This paper describes a study for the optimisation of the wheel profile in the wheel–rail system to increase the overall level of adhesion available at the contact interface, in particular to investigate how the wheel and rail profile combination may be designed to ensure the improved delivery of tractive/braking forces even in poor contact conditions. The research focuses on the geometric combination of both wheel and rail profiles to establish how the contact interface may be optimised to increase the adhesion level, but also to investigate how the change in the property of the contact mechanics at the wheel–rail interface may also lead to changes in the vehicle dynamic behaviour.     

Influence of wheel and rail profile shape on the initiation of rolling contact fatigue cracks at high axle loads

The influence of wheel and rail profile shape features on the initiation of rolling contact fatigue (RCF) cracks is evaluated based on the results of multi-body vehicle dynamics simulations. The damage index and surface fatigue index are used as two damage parameters to assess the influence of the different features. The damage parameters showed good agreement to one another and to in-field observations. The wheel and rail profile shape features showed a correlation to the predicted RCF damage. The RCF damage proved to be most sensitive to the position of hollow wear and thus bogie tracking. RCF initiation and crack growth can be reduced by eliminating unwanted shape features through maintenance and design and by improving bogie tracking.     

Effect of System Nonlinearities on Locomotive Bogie Hunting Stability

This paper presents the effect of system parameters on hunting of a rail vehicle with nonlinear yaw dampers and wheel-rail interface. This study is intended to complement earlier studies by True et al. where they investigated the effect of nonlinearities stemming from creep-creep force saturation and wheel/rail contact forces. The rail vehicle is represented by a two-axle truck (bogie) that includes the dynamics of the wheelsets and the truck frame. The numerical simulation results show that yaw damping can have a mixed effect on the hunting critical speed. In some ranges, increasing damping can actually lower the critical speed, unlike the results commonly obtained from a linear model. Flange contact nonlinearities can also have a significant effect on the hunting behavior. Large lateral stiffness of the rail can increase lateral force to vertical force (L/V) ratio during hunting. Increasing the gauge clearance, however, can have an opposite effect. The effect of a variety of other parameters, such as the primary suspension yaw and lateral stiffness, primary suspension lateral damping, wheelset mass, and truck frame mass, are summarized in a table.     

High-speed trains subject to abrupt braking

The dynamic response of high-speed train subject to braking is investigated using the moving element method. Possible sliding of wheels over the rails is accounted for. The train is modelled as a 15-DOF system comprising of a car body, two bogies and four wheels interconnected by spring-damping units. The rail is modelled as a Euler–Bernoulli beam resting on a two-parameter elastic damped foundation. The interaction between the moving train and track-foundation is accounted for through the normal and tangential wheel–rail contact forces. The effects of braking torque, wheel–rail contact condition, initial train speed and severity of railhead roughness on the dynamic response of the high-speed train are investigated. For a given initial train speed and track irregularity, the study revealed that there is an optimal braking torque that would result in the smallest braking distance with no occurrence of wheel sliding, representing a good compromise between train instability and safety.     

The effect of worn profile on wear progress of rail vehicle steel wheels over curved tracks

Dynamic performance, safety and maintenance costs of railway vehicles strongly depend on wheelset dynamics and particularly on the design of wheelset profile. This paper considers the effect of worn wheel profile on vehicle dynamics and the trend of wear in the wheels as a result of the vehicle movements. ADAMS/RAIL is used to build a multi-body system model of the vehicle. The track model is also configured as an elastic body. Measured new and worn wheel profiles are used to provide boundary conditions for the wheel/rail contacts. The fleet velocity profile taken during its normal braking is also used for the simulation. Wear numbers are calculated for different sets of wheels and the results compared with each other. Outcome of this research can be used for modifying dynamic performance of the vehicle, improving its suspension elements and increasing ride quality. It can also be further processed to reach to a modified wheel profile suitable for the fleet/track combination and for improved maintenance of the wheels. A major advantage of the computer models in this paper is the insertion of the wheel surface properties into the boundary conditions for dynamic modelling of the fleet. This is performed by regularly measuring the worn wheel profiles during their service life and by the calculation of the wear rate for individual wheels.     

Influence of wheel–rail contact modelling on vehicle dynamic simulation

This paper presents a comparison of four models of rolling contact used for online contact force evaluation in rail vehicle dynamics. Until now only a few wheel–rail contact models have been used for online simulation in multibody software (MBS). Many more models exist and their behaviour has been studied offline, but a comparative study of the mutual influence between the calculation of the creep forces and the simulated vehicle dynamics seems to be missing. Such a comparison would help researchers with the assessment of accuracy and calculation time. The contact methods investigated in this paper are FASTSIM, Linder, Kik–Piotrowski and Stripes. They are compared through a coupling between an MBS for the vehicle simulation and Matlab for the contact models. This way the influence of the creep force calculation on the vehicle simulation is investigated. More specifically this study focuses on the influence of the contact model on the simulation of the hunting motion and on the curving behaviour.     

Solution of the Multiple Wheel and Rail Contact Dynamic Problem

An unconventional method for calculating the forces developing in the wheel and rail contact patches of a railway vehicle has been implemented at the New Technology Laboratory of INRETS. It takes into account the elastic deformations of the materials in the Hertzian elliptical contact areas; the possibility of having simultaneously several contact patches on each wheel, is introduced in the simulation of the dynamic phenomena.

The theory is applied for a high speed bogie running on a perfectly straight track.     

Solution of the Multiple Wheel and Rail Contact Dynamic Problem

SUMMARY

An unconventional method for calculating the forces developing in the wheel and rail contact patches of a railway vehicle has been implemented at the New Technology Laboratory of INRETS. It takes into account the elastic deformations of the materials in the Hertzian elliptical contact areas; the possibility of having simultaneously several contact patches on each wheel, is introduced in the simulation of the dynamic phenomena.

The theory is applied for a high speed bogie running on a perfectly straight track.     

Development and validation of a wear model for the analysis of the wheel profile evolution in railway vehicles

The numerical wheel wear prediction in railway applications is of great importance for different aspects, such as the safety against vehicle instability and derailment, the planning of wheelset maintenance interventions and the design of an optimal wheel profile from the wear point of view. For these reasons, this paper presents a complete model aimed at the evaluation of the wheel wear and the wheel profile evolution by means of dynamic simulations, organised in two parts which interact with each other mutually: a vehicle's dynamic model and a model for the wear estimation. The first is a 3D multibody model of a railway vehicle implemented in SIMPACK?, a commercial software for the analysis of mechanical systems, where the wheel–rail interaction is entrusted to a C/C++user routine external to SIMPACK, in which the global contact model is implemented. In this regard, the research on the contact points between the wheel and the rail is based on an innovative algorithm developed by the authors in previous works, while normal and tangential forces in the contact patches are calculated according to Hertz's theory and Kalker's global theory, respectively. Due to the numerical efficiency of the global contact model, the multibody vehicle and the contact model interact directly online during the dynamic simulations.

The second is the wear model, written in the MATLAB® environment, mainly based on an experimental relationship between the frictional power developed at the wheel–rail interface and the amount of material removed by wear. Starting from a few outputs of the multibody simulations (position of contact points, contact forces and rigid creepages), it evaluates the local variables, such as the contact pressures and local creepages, using a local contact model (Kalker's FASTSIM algorithm). These data are then passed to another subsystem which evaluates, by means of the considered experimental relationship, both the material to be removed and its distribution along the wheel profile, obtaining the correspondent worn wheel geometry.

The wheel wear evolution is reproduced by dividing the overall chosen mileage to be simulated in discrete spatial steps: at each step, the dynamic simulations are performed by means of the 3D multibody model keeping the wheel profile constant, while the wheel geometry is updated through the wear model only at the end of the discrete step. Thus, the two parts of the whole model work alternately until the completion of the whole established mileage. Clearly, the choice of an appropriate step length is one of the most important aspects of the procedure and it directly affects the result accuracy and the required computational time to complete the analysis.

The whole model has been validated using experimental data relative to tests performed with the ALn 501 ‘Minuetto’ vehicle in service on the Aosta–Pre Saint Didier track; this work has been carried out thanks to a collaboration with Trenitalia S.p.A and Rete Ferroviaria Italiana, which have provided the necessary technical data and experimental results.     

Dynamic responses of a high-speed railway car due to wheel polygonalisation

The polygonal wear around the wheel circumference could pose highly adverse influences on the wheel/rail interactions and thereby the performance of the vehicle system. In this study, the effects of wheel polygonalisation on the dynamic responses of a high-speed rail vehicle are investigated through development and simulations of a comprehensive coupled vehicle/track dynamic model. The model integrates flexible slab track, wheelsets and axle boxes subsystem models so as to account for elastic deformations caused by impact loads induced by the wheel polygonalisation. A field-test programme was undertaken to acquire the polygonal wear profile and axle box acceleration response of a high-speed train, and the data are used to demonstrate the validity of the coupled vehicle/track system model. Subsequently, the effects of wheel polygonalisation are evaluated in terms of wheel/rail impact forces, axle box vertical acceleration and dynamic stress developed in the axle considering different amplitudes and harmonic orders of the polygonal wear. The results suggest that the high-order wheel polygonalisation can give rise to high-frequency impact loads at the wheel/rail interface, and excite some of the vibration modes of the wheelset and the axle box leading to high-magnitude axle box acceleration and dynamic stress in the wheelset axle.     

Modelling,validation and analysis of a three-dimensional railway vehicle–track system model with linear and nonlinear track properties in the presence of wheel flats

This paper presents dynamic contact loads at wheel–rail contact point in a three-dimensional railway vehicle–track model as well as dynamic response at vehicle–track component levels in the presence of wheel flats. The 17-degrees of freedom lumped mass vehicle is modelled as a full car body, two bogies and four wheelsets, whereas the railway track is modelled as two parallel Timoshenko beams periodically supported by lumped masses representing the sleepers. The rail beam is also supported by nonlinear spring and damper elements representing the railpad and ballast. In order to ensure the interactions between the railpads, a shear parameter beneath the rail beams has also been considered into the model. The wheel–rail contact is modelled using nonlinear Hertzian contact theory. In order to solve the coupled partial and ordinary differential equations of the vehicle–track system, modal analysis method is employed. Idealised Haversine wheel flats with the rounded corner are included in the wheel–rail contact model. The developed model is validated with the existing measured and analytical data available in the literature. The nonlinear model is then employed to investigate the wheel–rail impact forces that arise in the wheel–rail interface due to the presence of wheel flats. The validated model is further employed to investigate the dynamic responses of vehicle and track components in terms of displacement, velocity, and acceleration in the presence of single wheel flat.