An optimal variable speed limits system to ameliorate traffic safety risk

Active Traffic Management (ATM) systems have been emerging in recent years in the US and Europe. They provide control strategies to improve traffic flow and reduce congestion on freeways. This study investigates the feasibility of utilizing a Variable Speed Limits (VSL) system, one key part of ATM, to improve traffic safety on freeways. A proactive traffic safety improvement VSL control algorithm is proposed. First, an extension of the METANET (METANET: A macroscopic simulation program for motorway networks) traffic flow model is employed to analyze VSL’s impact on traffic flow. Then, a real-time crash risk evaluation model is estimated for the purpose of quantifying crash risk. Finally, optimal VSL control strategies are achieved by employing an optimization technique to minimize the total crash risk along the VSL implementation corridor. Constraints are setup to limit the increase of average travel time and the differences of the posted speed limits temporarily and spatially. This novel VSL control algorithm can proactively reduce crash risk and therefore improve traffic safety. The proposed VSL control algorithm is implemented and tested for a mountainous freeway bottleneck area through the micro-simulation software VISSIM. Safety impacts of the VSL system are quantified as crash risk improvements and speed homogeneity improvements. Moreover, three different driver compliance levels are modeled in VISSIM to monitor the sensitivity of VSL effects on driver compliance. Conclusions demonstrated that the proposed VSL system could improve traffic safety by decreasing crash risk and enhancing speed homogeneity under both the high and moderate compliance levels; while the VSL system fails to significantly enhance traffic safety under the low compliance scenario. Finally, future implementation suggestions of the VSL control strategies and related research topics are also discussed.     

Integrated feedback ramp metering and mainstream traffic flow control on motorways using variable speed limits

Ramp metering (RM) is the most direct and efficient tool for the motorway traffic flow management. However, because of the usually short length of the on-ramps, RM is typically deactivated to avoid interference of the created ramp queue with adjacent street traffic. By the integration of local RM with mainstream traffic flow control (MTFC) enabled via variable speed limits (VSL), control operation upstream of active bottlenecks could be continued even if the on-ramp is full or if the RM lower bound has been reached. Such integration is proposed via the extension of an existing local cascade feedback controller for MTFC-VSL by use of a split-range-like scheme that allows different control periods for RM and MTFC-VSL. The new integrated controller remains simple yet efficient and suitable for field implementation. The controller is evaluated in simulation for a real motorway infrastructure (a ring-road) fed with real (measured) demands and compared to stand-alone RM or MTFC-VSL, both with feedback and optimal control results. The controller’s performance is shown to meet the specifications and to approach the optimal control results for the investigated scenario.     

A genetic algorithm‐optimized fuzzy logic controller to avoid rear‐end collisions

In this paper, a rear‐end collision control model is proposed using the fuzzy logic control scheme. Through detailed analysis of car‐following cases, our fuzzy control system is established with reasonable control rules. Furthermore, a genetic algorithm is introduced into the fuzzy rules refining process to reduce the computational complexity while maintaining accuracy. Numerical results indicate that our genetic algorithm‐optimized fuzzy logic controller outperforms the traditional fuzzy logic controller in terms of better safety guarantee and higher traffic efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

Optimisation of dynamic motorway traffic via a parsimonious and decentralised approach

This paper presents an optimisation framework for motorway management via ramp metering and variable speed limit. We start with presenting a centralised global optimal control problem aiming to minimise the total travel delay in a motorway system. Given the centralised global optimal control solutions, we propose a set of decentralised ramp metering and speed control strategies which operate on a novel parsimonious dynamic platform without needing an underlying traffic model. The control strategies are applied to a case on UK M25 motorway. The results show that the proposed set of decentralised control is able to deliver a performance that is close to the global optimal ones with significantly less computational and implementation effort. This study provides new insights to motorway management.     

Integrated fuzzy signal and ramp‐metering at a diamond interchange

We propose a fuzzy logic control for the integrated signal operation of a diamond interchange and its ramp meter, to improve traffic flows on surface streets and motorway. This fuzzy logic diamond interchange (FLDI) comprises of three modules: fuzzy phase timing (FPT) module that controls the green time extension of the current phase, phase logic selection (PLS) module that decides the next phase based on the pre‐defined phase sequence or phase logic and, fuzzy ramp‐metering (FRM) module that determines the cycle time of the ramp meter based on current traffic volumes and conditions of the surface streets and the motorways. The FLDI is implemented in Advanced Interactive Microscopic Simulator for Urban and Non‐Urban Network Version 6 (AIMSUN 6), and compared with the traffic actuated signal control. Simulation results show that the FLDI outperforms the traffic‐actuated models with lower system total travel time, average delay, and improvements in downstream average speed and average delay. Copyright © 2011 John Wiley & Sons, Ltd.     

并联混合动力汽车改进模糊控制策略研究

本文提出一种兼顾电池SOC限值方法的混合动力汽车多种群遗传模糊控制策略。引入模糊逻辑控制以增强整车控制系统鲁棒性、实时性;用多种群遗传算法对模糊变量隶属度函数进行优化,使在模糊逻辑控制下整车燃油消耗得到降低;使用电池SOC限值方法避免电池在SOC过低时继续放电。利用matlab平台联合advisor软件进行联合仿真实验,仿真结果表明多种群遗传模糊模糊控制策略能够比advisor软件默认的电机辅住控制策略燃油经济性提高6.96%的情况,SOC限值方法使电池工作在更加合理的SOC值区间范围内,有效保护电池。     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.     

Optimal mainstream traffic flow control of large-scale motorway networks

The continuously increasing daily traffic congestions on motorway networks around the world call for innovative control measures that would drastically improve the current traffic conditions. Mainstream traffic flow control (MTFC) is proposed as a novel and efficient motorway traffic management tool, and its possible implementation and principal impact on traffic flow efficiency is analysed. Variable speed limits, suitably operated and enforced, is considered as one (out of several possible) way(s) for MTFC realisation, either as a stand-alone measure or in combination with ramp metering. A previously developed, computationally efficient software tool for optimal integrated motorway network traffic control including MTFC is applied to a large-scale motorway ring-road. It is demonstrated via several investigated control scenarios that traffic flow can be substantially improved via MTFC with or without integration with coordinated ramp metering actions.     

Variable speed limit control for severe non-recurrent freeway bottlenecks

Variable speed limit (VSL) schemes are developed based on the Kinematic Wave theory to increase discharge rates at severe freeway bottlenecks induced by non-recurrent road events such as incidents or work zones while smoothing speed transition. The main control principle is to restrict upstream demand (in free-flow) progressively to achieve three important objectives: (i) to provide gradual speed transition at the tail of an event-induced queue, (ii) to clear the queue around the bottleneck, and (iii) to discharge traffic at the stable maximum flow that can be sustained at the bottleneck without breakdown. These control objectives are accomplished without imposing overly restrictive speed limits. We further provide remedies for (a) underutilized bottleneck capacity due to underestimated stable maximum flow and (b) a re-emergent queue at the bottleneck due to an overestimated stable maximum flow. We analytically formulate the reductions in total delay in terms of control parameters to provide an insight into the system performance and sensitivity. The results from the parameter analysis suggest that significant delay savings can be realized with the proposed VSL control strategies.     

An application of the CUSUM algorithm to freeway incident detection based on two contiguous detectors

The CUSUM (cumulative sum of log‐likelihood ratio) algorithm is a detection algorithm that shows potential for the improvement of incident detection algorithms because it is designed to minimize the mean detect delay for a given false alarm constraint and it can also detect changes with different patterns. In this study, the CUSUM algorithm was applied to freeway incident detection by integrating traffic measurements from two contiguous loop detectors and the non‐stationarity of traffic flows. The developed algorithm was tested based on incident data from the PATH program, with consideration given to the impact of different geometric conditions on algorithm performance. It was also compared with two existing algorithms, in order to address the influence of traffic patterns. The evaluation results show that the CUSUM incident detection algorithm can perform equally well in comparison with the selected algorithms.     

Validation of an extended discrete first-order model with variable speed limits

This paper validates the prediction model embedded in a model predictive controller (MPC) of variable speed limits (VSLs). The MPC controller was designed based on an extended discrete first-order model with a triangular fundamental diagram. In our previous work, the extended discrete first-order model was designed to reproduce the capacity drop and the propagation of jam waves, and it was validated with reasonable accuracy without the presence of VSLs. As VSLs influence traffic dynamics, the dynamics including VSLs needs to be validated, before it can be applied as a prediction model in MPC. For conceptual illustrations, we use two synthetic examples to show how the model reproduces the key mechanisms of VSLs that are applied by existing VSL control approaches. Furthermore, the model is calibrated by use of real traffic data from Dutch freeway A12, where the field test of a speed limit control algorithm (SPECIALIST) was conducted. In the calibration, the original model is extended by using a quadrangular fundamental diagram which keeps the linear feature of the model and represents traffic states at the under-critical branch more accurately. The resulting model is validated using various traffic data sets. The accuracy of the model is compared with a second-order traffic flow model. The performance of two models is comparable: both models reproduce accurate results matching with real data. Flow errors of the calibration and validation are around 10%. The extended discrete first-order model-based MPC controller has been demonstrated to resolve freeway jam waves efficiently by synthetic cases. It has a higher computation speed comparing to the second-order model-based MPC.     

Effects of low speed limits on freeway traffic flow

Recent years have seen a renewed interest in Variable Speed Limit (VSL) strategies. New opportunities for VSL as a freeway metering mechanism or a homogenization scheme to reduce speed differences and lane changing maneuvers are being explored. This paper examines both the macroscopic and microscopic effects of different speed limits on a traffic stream, especially when adopting low speed limits. To that end, data from a VSL experiment carried out on a freeway in Spain are used. Data include vehicle counts, speeds and occupancy per lane, as well as lane changing rates for three days, each with a different fixed speed limit (80 km/h, 60 km/h, and 40 km/h). Results reveal some of the mechanisms through which VSL affects traffic performance, specifically the flow and speed distribution across lanes, as well as the ensuing lane changing maneuvers. It is confirmed that the lower the speed limit, the higher the occupancy to achieve a given flow. This result has been observed even for relatively high flows and low speed limits. For instance, a stable flow of 1942 veh/h/lane has been measured with the 40 km/h speed limit in force. The corresponding occupancy was 33%, doubling the typical occupancy for this flow in the absence of speed limits. This means that VSL strategies aiming to restrict the mainline flow on a freeway by using low speed limits will need to be applied carefully, avoiding conditions as the ones presented here, where speed limits have a reduced ability to limit flows. On the other hand, VSL strategies trying to get the most from the increased vehicle storage capacity of freeways under low speed limits might be rather promising. Additionally, results show that lower speed limits increase the speed differences across lanes for moderate demands. This, in turn, also increases the lane changing rate. This means that VSL strategies aiming to homogenize traffic and reduce lane changing activity might not be successful when adopting such low speed limits. In contrast, lower speed limits widen the range of flows under uniform lane flow distributions, so that, even for moderate to low demands, the under-utilization of any lane is avoided. These findings are useful for the development of better traffic models that are able to emulate these effects. Moreover, they are crucial for the implementation and assessment of VSL strategies and other traffic control algorithms.     

Freeway ramp control using fuzzy set theory for inexact reasoning

This paper presents a fuzzy controller for freeway ramp metering, which uses rules of the form: IF “freeway condition” THEN “control action.” The controller has been designed to consider varied levels of congestion, a downstream control area, changing occupancy levels, upstream flows, and a distributed detector array in its rule base. Through fuzzy implication, the inference of each rule is used to the degree to which the condition is true. Using a dynamic simulation model of conditions0fj at the San Francisco-Oakland Bay Bridge, the action of the fuzzy controller is compared to the existing “crisp” control scheme, and an idealized controller. Tests under a variety of scenarios with different incident locations and capacity reductions show that the fuzzy controller is able to extract 40 to 100% of the possible savings in passenger-hours. In general, the fuzzy algorithm displays smooth and rapid response to incidents, and significantly reduces the minute-miles of congestion.     

The reliability of the motorway transport system

This paper presents an analysis of motorway circulation under congested traffic conditions, with the aim of arriving at a measurement of the reliability of the motorway transport system. The author suggests a model of the speed process on a motorway lane under conditions of congestion, which was tested experimentally employing a great number of data collected on two motorways, varying considerably in terms of environmental and traffic conditions. It is shown that the relationships between the parameters of this process and the traffic density define in sufficiently complete fashion the behaviour of the motorway transport system under conditions of congestion. Using this speed process model, a simulation procedure was developed which permits calculation of the reliability of a traffic stream. Finally a method was determined for calculating the reliability in real time, which can be usefully employed in motorway traffic control.     

General fuzzy rule base for isolated traffic signal control‐rule formulation

Traffic signal control is one of the oldest applications of fuzzy logic, at least in transportation engineering. The aim of this paper is to present a systematic approach to fuzzy traffic signal control and to derive the linguistic control rules based on expert knowledge. Traffic signal programming is generally divided into two problems: firstly, the choice and sequencing of signal stages to be used, and secondly, optimizing the relative lengths of these stages. The rule bases for both problems are introduced in our paper. The results of tested rule bases and field tests of fuzzy control have been promising. The fuzzy signal control algorithms offer better measures of effectiveness than the traditional vehicle‐actuated control.     

Solving the logistic problems with optimal resource assignment using fuzzy logic methods

Fuzzy approach of optimal resource assignment regarding the given demands in the scope of transportation will be presented in the article. The basis of the research is the crisp solution which is also presented in the article. The basic solution was upgraded in order to be able to handle vaguely (i.e. fuzzily) defined requirements and resource properties. The optimal resource configuration is calculated with the aid of Hungarian algorithm which uses the data calculated with the fuzzy methods for its inputs. The approach described is presented on the example of a military convoy formation. Copyright © 2011 John Wiley & Sons, Ltd.     

汽车电子控制自动离合器系统的研制分析

文章针对现有汽车电子自动离合器存在的缺点,设计了一套汽车电子自动控制离合器系统.该系统以单片机为控制核心,通过采集汽车的各种行车信息,运用模糊自适应算法得到合适的PWM调速信号控制机械执行机构,并配以刹车辅助控制,实现了离合器的平稳、可靠控制,提高了驾驶的舒适性和便利性.     

Hybrid simulated annealing and genetic algorithm for optimizing arterial signal timings under oversaturated traffic conditions

The implementation of system‐wide signal optimization models requires efficient solution algorithms that can quickly generate optimal or near‐optimal signal timings. This paper presents a hybrid algorithm based on simulated annealing (SA) and a genetic algorithm (GA) for arterial signal timing optimization. A decoding scheme is proposed that exploits our prior expectations about efficient solutions, namely, that the optimal green time distribution should reflect the proportion of the critical lane volumes of each phase. An SA algorithm, a GA algorithm and a hybrid SA‐GA algorithm are developed here using the proposed decoding scheme. These algorithms can be adapted to a wide range of signal optimization models and are especially suitable for those optimizing phase sequences with oversaturated intersections. To comparatively evaluate the performance of the proposed algorithms, we apply them to a signal optimization model for oversaturated arterial intersections based on an enhanced cell transmission model. The numerical results indicate that the SA‐GA algorithm outperforms both SA and GA in terms of solution quality and convergence rate. Copyright © 2014 John Wiley & Sons, Ltd.     

Feedback control speed harmonization algorithm: Methodology and preliminary testing

The capacity drop phenomenon, which reduces the maximum bottleneck discharge rate following the onset of congestion, is a critical restriction in transportation networks that produces additional traffic congestion. Consequently, preventing or reducing the occurrence of the capacity drop not only mitigates traffic congestion, but can also produce environmental and traffic safety benefits. In addressing this problem, the paper develops a novel bang-bang feedback control speed harmonization (SH) or Variable Speed Limit (VSL) algorithm, that attempts to prevent or delay the breakdown of a bottleneck and thus reduce traffic congestion. The novelty of the system lies in the fact that it is both proactive and reactive in responding to the dynamic stochastic nature of traffic. The system is proactive because it uses a calibrated fundamental diagram to initially identify the optimum throughput to maintain within the SH zone. Furthermore, the system is reactive (dynamic) because it monitors the traffic stream directly upstream of the bottleneck to adjustment the metering rate to capture the dynamic and stochastic nature of traffic. The steady-state traffic states in the vicinity of a lane-drop bottleneck before and after applying the SH algorithm is analyzed to demonstrate the effectiveness of the algorithm in alleviating the capacity drop. We demonstrate theoretically that the SH algorithm is effective in enhancing the bottleneck discharge rate. A microscopic simulation of the network using the INTEGRATION software further demonstrates the benefits of the algorithm in increasing the bottleneck discharge rate, decreasing vehicle delay, and reducing vehicle fuel consumption and CO₂ emission levels. Specifically, compared with the base case without the SH algorithm, the advisory speed limit increases the bottleneck discharge rate by approximately 7%, reduces the overall system delay by approximately 20%, and reduces the system-wide fuel consumption and CO₂ emission levels by 5%.