Quantifying drivers’ acceptance of renewable fuel standard: Results from a choice experiment in South Korea

The production and use of renewable fuels in the transport sector are rapidly increasing. Renewable fuel standard (RFS) is a strong regulatory component and quantitative policy expected to have a significant market impact. In Korea, RFS implementation was agreed upon in July 2013 and will be enforced beginning in July 2015. Drivers’ acceptance is the most important consideration for RFS introduction and sustainable implementation. This study analyzed Korean customer preferences for RFS and quantified their acceptance level according to policy design. A choice experiment was analyzed with a mixed logit model to reflect the heterogeneity of respondents’ preferences. Respondents were relatively sensitive to the price increase, while other attributes had little effect on acceptance of RFS. Differences between the influences of attributes on drivers’ acceptance should be considered when designing RFS implementation. Furthermore, it is recommended that the price of transportation fuels should be limited to an increase between KRW 10 and 20/liter (USD 8.879 × 10⁻³ and 1.776 × 10⁻²/liter) to ensure high acceptance level, secure a budget for infrastructure, and achieve substantial environmental improvement.     

Capitalization of BRT network expansions effects into prices of non-expansion areas

A before and after hedonic model is used to determine the property value impacts on properties already served by the transit system caused by extensions to Bogotá’s bus rapid transit system. Asking prices of residential properties belonging to an intervention area (N = 1407 before, 1570 after) or a control area (N = 267 before, 732 after) and offered for sale between 2001 and 2006 are used to determine capitalization of the enhanced regional access provided by the extension. Properties offered during the year the extension was inaugurated and in subsequent years have asking prices that are between 13% and 14% higher than prices for properties in the control area, after adjusting for structural, neighborhood and regional accessibility characteristics of each property. Furthermore, the appreciation is similar for properties within 500 m and properties between 500 m and 1 km of the BRT.     

Sulphur abatement globally in maritime shipping

In 2016, the International Maritime Organization (IMO) decided on global regulations to reduce sulphur emissions to air from maritime shipping starting 2020. The regulation implies that ships can continue to use residual fuels with a high sulphur content, such as heavy fuel oil (HFO), if they employ scrubbers to desulphurise the exhaust gases. Alternatively, they can use fuels with less than 0.5% sulphur, such as desulphurised HFO, distillates (diesel) or liquefied natural gas (LNG). The options of lighter fuels and desulphurisation entail costs, including higher energy consumption at refineries, and the present study identifies and compares compliance options as a function of ship type and operational patterns.The results indicate distillates as an attractive option for smaller vessels, while scrubbers will be an attractive option for larger vessels. For all vessels, apart from the largest fuel consumers, residual fuels desulphurised to less than 0.5% sulphur are also a competing abatement option. Moreover, we analyse the interaction between global SO_X reductions and CO₂ (and fuel consumption), and the results indicate that the higher fuel cost for distillates will motivate shippers to lower speeds, which will offset the increased CO₂ emissions at the refineries. Scrubbers, in contrast, will raise speeds and CO₂ emissions.     

Fueling for contingencies: The hidden cost of unpredictability in the air transportation system

The aviation community is increasing its attention on the concept of predictability when conducting aviation service quality assessments. Reduced fuel consumption and the related cost is one of the various benefits that could be achieved through improved flight predictability. A lack of predictability may cause airline dispatchers to load more fuel onto aircraft before they depart; the flights would then in turn consume extra fuel just to carry excess fuel loaded. In this study, we employ a large dataset with flight-level fuel loading and consumption information from a major US airline. With these data, we estimate the relationship between the amount of loaded fuel and flight predictability performance using a statistical model. The impact of loaded fuel is translated into fuel consumption and, ultimately, fuel cost and environmental impact for US domestic operations. We find that a one-minute increase in the standard deviation of airborne time leads to a 0.88 min increase in loaded contingency fuel and 1.66 min in loaded contingency and alternate fuel. If there were no unpredictability in the aviation system, captured in our model by eliminating standard deviation in flight time, the reduction in the loaded fuel would between 6.12 and 11.28 min per flight. Given a range of fuel prices, this ultimately would translate into cost savings for US domestic airlines on the order of $120–$452 million per year.     

Biofuels in aviation: Fuel demand and CO2 emissions evolution in Europe toward 2030

This article presents the results of a scenario-based study carried out at the European Commission’s Joint Research Centre aimed at analyzing the future growth of aviation, the resulting fuel demand and the deployment of biofuels in the aviation sector in Europe. Three scenarios have been produced based on different input assumptions and leading to different underlying patterns of growth and resulting volumes of traffic. Data for aviation growth and hence fuel demand have been projected on a year by year basis up to 2030, using 2010 as the baseline. Data sources are Eurostat statistics and actual flight information from EUROCONTROL. Relevant variables such as the number of flights, the type of aircrafts, passengers or cargo tonnes and production indicators (RPKs) are used together with fuel consumption and CO₂ emissions data. The target of the European Advanced Biofuels Flightpath to ensure the commercialization and consumption of 2 million tons of sustainably produced paraffinic biofuels in the aviation sector by 2020, has also been taken into account. Results regarding CO₂ emission projections to 2030, reveal a steady annual increase in the order of 3%, 1% and 4% on average, for the three different scenarios, providing also a good correlation compared to the annual traffic growth rates that are indicated in the three corresponding scenarios. In absolute values, these ratios correspond to the central, the pessimistic and the optimistic scenarios respectively, corresponding to 360 million tonnes CO₂ emissions in 2030, ranging from 271 to 401 million tonnes for the pessimistic and optimistic scenarios, respectively. This article also reports on the supply potential of aviation biofuels (clustered in HEFA/HVOs and biojet) based on the production capacity of facilities around the world and provides an insight on the current and future trends in aviation based on the European and national policies, innovations and state-of-the art technologies that will influence the future of sustainable fuels in aviation.     

Fuel price elasticities for single-unit truck operations in the United States

This paper provides fuel price elasticity estimates for single-unit truck activity, where single-unit trucks are defined as vehicles on a single frame with either (1) at least two axles and six tires; or (2) a gross vehicle weight greater than 10,000 lb. Using data from 1980 to 2012, this paper applies first-difference and error correction models and finds that single-unit truck activity is sensitive to certain macroeconomic and infrastructure factors (gross domestic product, lane miles expansion, and housing construction), but is not sensitive to diesel fuel prices. These results suggest that fuel price elasticities of single unit truck activity are inelastic. These results may be used by policymakers in considering policies that have a direct impact on fuel prices, or policies whose effects may be equivalent to fuel price adjustments.     

Thermodynamic,environmental and economic effects of diesel and biodiesel fuels on exhaust emissions and nano-particles of a diesel engine

In this study, diesel (JIS#2) and various biodiesel fuels (BDF20, BDF50, BDF100) are used to operate the diesel engine at 100 Nm, 200 Nm and full load; while the engine speed is 1800 rpm. The system is experimentally studied, and the energy, exergy, sustainability, thermoeconomic and exergoeconomic analyses are performed to the system. The Engine Exhaust Particle Sizer is used to measure the size distribution of engine exhaust particle emissions. Also, the data of the exhaust emissions, soot, particle numbers, fuel consumptions, etc. are measured. It is found that (i) most of the exhaust emissions (except NO_x) are directly proportional to the engine load, (ii) maximum CO₂ and NO_x emissions rates are generally determined for the BDF100 biodiesel fuel; while the minimum ones are calculated for the JIS#2 diesel fuel. On the other hand, the maximum CO and HC emissions rates are generally computed for the JIS#2 diesel fuel; while the minimum ones are found for the BDF100 biodiesel fuel, (iii) fuel consumptions from maximum to minimum are BDF100 > BDF50 > BDF20 > JIS#2 at all of the engine loads, (iv) particle concentration of the JIS#2 diesel fuel is higher than the biodiesel fuels, (v) soot concentrations of the JIS#2, BDF20 and BDF50 fuels are directly proportional to the engine load; while the BDF100 is inversely proportional, (vi) system has better energy and exergy efficiency when the engine is operated with the biodiesel fuels (vii) sustainability of the fuels are BDF100 > BDF50 > BDF20 > JIS#2, (viii) thermoeconomic and exergoeconomic parameters rates from maximum to minimum are JIS#2 > BDF20 > BDF50 > BDF100.     

Regional climate impact of aerosols emitted by transportation modes and potential effects of policies on demand and emissions

The transportation system is one of the main sectors with significant climate impact. In the U.S. it is the second main emitter of carbon dioxide. Its impact in terms of emission of carbon dioxide is well recognized. But a number of aerosol species have a non-negligible impact. The radiative forcing due to these species needs to be quantified. A radiative transfer code is used. Remote sensing data is retrieved to characterize different regions. The radiative forcing efficiency for black carbon are 396 ± 200 W/m²/AOD for the ground mode and 531 ± 190 W/m²/AOD for the air transportation, under clear sky conditions. The radiative forcing due to contrail is 0.14 ± 0.06 W/m² per percent coverage. Based on the forcing from the different species emitted by each mode of transportation, policies may be envisioned. These policies may affect demand and emissions of different modes of transportation. Demand and fleet models are used to quantify these interdependencies. Depending on the fuel price of each mode, mode shifts and overall demand reduction occur, and more fuel efficient vehicles are introduced in the fleet at a faster rate. With the introduction of more fuel efficient vehicles, the effect of fuel price on demand is attenuated. An increase in fuel price of 50 cents per gallon, scaled based on the radiative forcing of each mode, results in up to 5% reduction in emissions and 6% reduction in radiative forcing. With technologies, significant reduction in climate impact may be achieved.     

Would personal carbon trading reduce travel emissions more effectively than a carbon tax?

The application of personal carbon trading (PCT) to transport choices has recently been considered in the literature as a means of reducing CO₂ emissions. Its potential effectiveness in changing car travel behavior is compared to the conventional carbon tax (CT) by means of a stated preferences survey conducted among French drivers (N ∼ 300). We show evidence that PCT could effectively change travel behavior and hence reduce transport emissions from personal travel. There is however a definite reluctance to reduce car travel. We were unable to demonstrate any significant difference between the effectiveness of PCT and the CT with regard to changing travel behavior. However, in the experiment, the PCT scheme provided consistent results while this was not the case for the CT scheme. Further research is needed into the “social norm” conveyed by a personal emissions allowance.     

Vehicle attribute trade-offs to meet the 2025 CAFE fuel economy target

The literature analyzes changes in vehicle attributes that can improve fuel economy to meet Corporate Average Fuel Economy (CAFE) standards. However, these analyses exclude either vehicle price, size, acceleration or technology advancement. A more comprehensive examination of the trade-offs among these attributes is needed, this case study focuses on technically feasible modifications to a reference 2012 vehicle to meet the 2025 fuel economy target. Scenarios developed to examine uncertainty in technology advancement indicate that expected technology cost reductions over time will be insufficient to offset the costs of additional fuel efficiency technologies that could be used to meet the 2025 fuel economy target while maintaining other vehicle attributes. The mid-price scenario results show the targeted 66% increase in fuel economy from 2012 to 2025 can be achieved with (i) a 10% ($2070) vehicle price increase (lightweight hybrid electric vehicle), (ii) a 31% (2.9 second) increase in the 0–97 km/h (60 mph) acceleration time (smaller engine), or (iii) a 17% (700 L) decrease in interior volume (smaller body) while maintaining other vehicle attributes. These results are consistent with those obtained using methods that generalize the US light-duty vehicle fleet, but are not a forecast of future vehicle attributes because combinations of less perceptible changes to vehicle price, acceleration and size would also be feasible. This study shows there are numerous ways that 2025 fuel economy targets can be met; therefore, the trade-offs quantified provide important insights on the implications of future CAFE standards.     

Evaluating policies to reduce greenhouse gas emissions from private transportation

This paper proposes a model system to forecast household greenhouse gas emissions (GHGEs) from private transportation. The proposed model combines an integrated discrete-continuous car ownership model with MOVES 2014. Four modeling components are calibrated and applied to the calculation of GHGEs: vehicle quantity, vehicle type and vintage, miles traveled, and rates of GHGEs. The model is applied to the Washington D.C. Metropolitan Area. Three tax schemes are evaluated: vehicle ownership tax, purchase tax and fuel tax. We calculate that the average GHGEs per vehicle is 5.15 tons of carbon dioxide-equivalent (CO₂E) gases. Our results show that: (a) a fuel tax is the most effective way to reduce vehicle GHGEs, especially for households with fewer vehicles; (b) a purchase tax reduces vehicle GHGEs mainly by decreasing vehicle quantity for households with more vehicles; and (c) an ownership tax reduces vehicle GHGEs by decreasing both vehicle quantity and miles traveled.     

Electric vehicle parking in European and American context: Economic,energy and environmental analysis

The transportation sector faces increasing challenges related to energy consumption and local and global emissions profiles. Thus, alternative vehicle technologies and energy pathways are being considered in order to overturn this trend and electric mobility is considered one adequate possibility towards a more sustainable transportation sector.In this sense, this research work consisted on the development of a methodology to assess the economic feasibility of deploying EV charging stations (Park-EV) by quantifying the tradeoff between economic and energy/environmental impacts for EV parking spaces deployment. This methodology was applied to 4 different cities (Lisbon, Madrid, Minneapolis and Manhattan), by evaluating the influence of parking premium, infrastructure cost and occupancy rates on the investment Net Present Value (NPV). The main findings are that the maximization of the premium and the minimization of the equipment cost lead to higher NPV results. The NPV break-even for the cities considered is more “easily” reached for higher parking prices, namely in the case of Manhattan with the higher parking price profile. In terms of evaluating occupancy rates of the EV parking spaces, shifting from a low usage (LU) to a high usage (HU) scenario represented a reduction in the premium to obtain a NPV = 0 of approximately 14% for a 2500 € equipment cost, and, in the case of a zero equipment cost (e.g. financed by the city), a NPV = 0 was obtained with approximately a 2% reduction in the parking premium. Moreover, due to the use of electric mobility instead of the average conventional technologies, Well-to-Wheel (WTW) gains for Lisbon, Madrid, Minneapolis and Manhattan were estimated in 58%, 53%, 52% and 75% for energy consumption and 66%, 75%, 62% and 86% for CO₂ emissions, respectively.This research confirms that the success of deploying an EV charging stations infrastructure will be highly dependent on the price the user will have to pay, on the cost of the infrastructure deployed and on the adhesion of the EV users to this kind of infrastructure. These variables are not independent and, consequently, the coordination of public policies and private interest must be promoted in order to reach an optimal solution that does not result in prohibitive costs for the users.     

Evaluation of eco-driving training for vehicle fuel use and emission reduction: A case study in Australia

This study evaluates effectiveness of driver education teaching greater fuel efficiency (Eco-Driving) in a real world setting in Australia. The driving behaviour, measured in fuel use (litres per 100 km of travel) of a sample of 1056 private drivers was monitored over seven months. 853 drivers received education in eco-driving techniques and 203 were monitored as a control group. A simple experimental design was applied comparing the pre and post training fuel use of the treated sample compared to a control sample. This study found the driver education led to a statistically significant reduction in fuel use of 4.6% or 0.51 litres per 100 km compared to the control group.     

Analysis of fuel consumption and pollutant emissions of regulated and alternative driving cycles based on real-world measurements

Discrepancies between real-world use of vehicles and certification cycles are a known issue. This paper presents an analysis of vehicle fuel consumption and pollutant emissions of the European certification cycle (NEDC) and the proposed worldwide harmonized light vehicles test procedure (WLTP) Class 3 cycle using data collected on-road. Sixteen light duty vehicles equipped with different propulsion technologies (spark-ignition engine, compression-ignition engine, parallel hybrid and full hybrid) were monitored using a portable emission measurement system under real-world driving conditions. The on-road data obtained, combined with the Vehicle Specific Power (VSP) methodology, was used to recreate the dynamic conditions of the NEDC and WLTP Class 3 cycle. Individual vehicle certification values of fuel consumption, CO₂, HC and NO_x emissions were compared with test cycle estimates based on road measurements. The fuel consumption calculated from on-road data is, on average, 23.9% and 16.3% higher than certification values for the recreated NEDC and WLTP Class 3 cycle, respectively. Estimated HC emissions are lower in gasoline and hybrid vehicles than certification values. Diesel vehicles present higher estimated NO_x emissions compared to current certification values (322% and 326% higher for NO_x and 244% and 247% higher for HC + NO_x for NEDC and WLTP Class 3 cycle, respectively).     

Performance and emission characteristics of a spark ignition engine fuelled with butanol isomer-gasoline blends

The heavy reliance on petroleum-derived fuels such as gasoline in the transportation sector is one of the major causes of environmental pollution. For this reason, there is a critical need to develop cleaner alternative fuels. Butanol is an alcohol with four different isomers that can be blended with gasoline to produce cleaner alternative fuels because of their favourable physicochemical properties compared to ethanol. This study examined the effect of butanol isomer-gasoline blends on the performance and emission characteristics of a spark ignition engine. The butanol isomers; n-butanol, sec-butanol, tert-butanol and isobutanol are mixed with pure gasoline at a volume fraction of 20 vol%, and the physicochemical properties of these blends are measured. Tests are conducted on a SI engine at full throttle condition within an engine speed range of 1000–5000 rpm. The results show that there is a significant increase in the engine torque, brake power, brake specific fuel consumption and CO₂ emissions with respect to those for pure gasoline. The butanol isomers-gasoline blends give slightly higher brake thermal efficiency and exhaust gas temperature than pure gasoline at higher engine speeds. The iBu20 blend (20 vol% of isobutanol in gasoline) gives the highest engine torque, brake power and brake thermal efficiency among all of the blends tested in this study. The isobutanol and n-butanol blend results in the lowest CO and HC emissions, respectively. In addition, all of the butanol isomer-gasoline blends yield lower NO emissions except for the isobutanol-gasoline blend.     

Evaluating the social cost of cruise ships air emissions in major ports of Greece

Detailed NO_x, SO₂ and PM_2.5 emissions have been estimated for cruise ships in the five busiest Greek ports (i.e. Piraeus, Santorini, Mykonos, Corfu and Katakolo) for year 2013. The emissions were analyzed in terms of gas species, seasonality and activity. The total in-port inventory of cruise shipping accounted to 2742.7 tons: with NO_x being dominant (1887.5 tons), followed by SO₂ and PM_2.5 (760.9 and 94.3 tons respectively). Emissions during hotelling corresponded to 88.5% of total and have significantly outweighed those produced during ships’ maneuvering activities (11.5% of total). Seasonality was found to play a major role, as summer emissions and associated impacts were significantly augmented. The anticipated health impacts of ship emissions can reach to €24.3 million or to €5.3 per passenger proving the necessity of control of the emissions produced by cruise ships in port cities or policy and measures towards a more efficient cruise industry.     

What is the market potential of plug-in electric vehicles as commercial passenger cars? A case study from Germany

Commercial passenger cars are a possible early market segment for plug-in electric vehicles (PEVs). Compared to privately owned vehicles, the commercial vehicle segment is characterized by higher mileage and a higher share of vehicle sales in Germany. To this point, there are only few studies which analyze the commercial passenger car sector and arrive at contradictory results due to insufficient driving profile data with an observation period of only one day. Here, we calculate the market potential of PEVs for the German commercial passenger car sector by determining the technical and economical potential for PEVs in 2020 from multi-day driving profiles. We find that commercial vehicles are better suited for PEVs than private ones since they show higher average annual mileage and drive more regularly. About 87% of the analyzed three-week vehicle profiles can technically be fulfilled by battery electric vehicles (BEVs) with an electric driving range of about 110 km while plug-in hybrid electric vehicles (PHEVs) with an electric range of 40 km could obtain an electric driving share of 60% on average. In moderate energy price scenarios, PEVs can reach a market share of 2–4% in the German commercial passenger car sales by 2020 and especially the large commercial branches (Trade, Manufacturing, Administrative services and Other services) are important. However, our analysis shows a high sensitivity of results to energy and battery prices as well as electric consumptions.     

Integrated vehicle and powertrain optimization for passenger vehicles with vehicle-infrastructure communication

This research proposes an optimal controller to improve fuel efficiency for a vehicle equipped with automatic transmission traveling on rolling terrain without the presence of a close preceding vehicle. Vehicle acceleration and transmission gear position are optimized simultaneously to achieve a better fuel efficiency. This research leverages the emerging Connected Vehicle technology and utilizes present and future information—such as real-time dynamic speed limit, vehicle speed, location and road topography—as optimization input. The optimal control is obtained using the Relaxed Pontryagin’s Minimum Principle. The benefit of the proposed optimal controller is significant compared to the regular cruise control and other eco-drive systems. It varies with the hill length, grade, and the number of available gear positions. It ranges from an increased fuel saving of 18–28% for vehicles with four-speed transmission and 25–45% for vehicles with six-speed transmission. The computational time for the optimization is 1.0–2.1 s for the four-speed vehicle and 1.8–3.9 s for the six-speed vehicle, given a 50 s optimization time horizon and 0.1 s time step. The proposed controller can potentially be used in real-time.     

Point-to-point speed enforcement systems: Speed limits design criteria and analysis of drivers’ compliance

Point-to-point (P2P) speed enforcement is a relatively new approach to traffic law enforcement. Its technology allows vehicles whose average speed exceeds the speed limit over the controlled section to be fined. It therefore encourages compliance over distances longer than those where spot enforcement policies have been in place.In this paper, a procedure for consistently setting speed limits with such enforcement systems is proposed. Such a method has been applied to design the speed limits on two motorways in the district of Naples, Italy, where P2P enforcement systems became operational in 2009 and 2010. The speed limits, which were set using the Italian geometric design standard to assess vehicle stability and stopping sight distance, have been compared with those provided by using well-known international standards.The impact of the newly designed speed limits and of the P2P enforcement system on drivers’ speeding behaviour has been quantified for each highway section and vehicle type. In fact, accurate measurements of the average travel speeds of each vehicle crossing the enforced sections, before and after the activation of the system, were available. The migration from the old speed limits with spot speed enforcement to the new approach resulted in a notable increase in drivers’ compliance to the speed limits with a remarkable decrease in both the average of individual speeds and in their standard deviation.In addition, the analysis of 3 years of data shows that a gradual adaptation of drivers’ behaviour to the system took place. In particular, a decreasing compliance to the speed limits points to a non-optimal system management. Finally, the results of a revealed preference survey allowed us to make a behavioural interpretation regarding the significantly different impacts measured on the two motorways.