A tabu search algorithm to solve the integrated planning of container on an inter-terminal network connected with a hinterland rail network

Transport demand for containers has been increasing for decades, which places pressure on road transport. As a result, rail transport is stimulated to provide better intermodal freight transport services. This paper investigates mathematical models for the planning of container movements in a port area, integrating the inter-terminal transport of containers (ITT, within the port area) with the rail freight formation and transport process (towards the hinterland). An integer linear programming model is used to formulate the container transport across operations at container terminals, the network interconnecting them, railway yards and the railway networks towards the hinterland. A tabu search algorithm is proposed to solve the problem. The practical applicability of the algorithm is tested in a realistic infrastructure case and different demand scenarios. Our results show the degree by which internal (ITT) and external (hinterland) transport processes interact, and the potential for improvement of overall operations when the integrated optimization proposed is used. Instead, if the planning of containers in the ITT system is optimized as a stand-alone problem, the railway terminals may suffer from longer delay times or additional train cancellations. When planning the transport of 4060 TEU containers within one day, the benefits of the ITT planning without considering railway operations account for 17% ITT cost reduction but 93% railway operational cost growth, while the benefits of integrating ITT and railway account for a reduction of 20% in ITT cost and 44% in railway operational costs.     

The private and social cost efficiency of port hinterland container distribution through a regional logistics system

Increasingly, the debate on freight transport and logistics involves the challenge of sustainable development. Key objectives of sustainable or “green” freight logistics systems are the mitigation of negative environmental and human health effects of distribution operations and the realization of a major modal shift in transport preferences, while at the same time achieving internal generalized cost efficiency and quality of services. Pursuing these goals requires the introduction of a range of measures. These measures call for private and public actors to take up various initiatives and adopt policies. Usually, it is more effective to combine different actions into an integrated package of measures than to introduce single instruments in isolation.This article explores the nexus between sustainability and port hinterland container logistics. In particular, the methodology and results of an empirical analysis based on applications of a network programming tool called the “interport model” are presented and discussed. The model enables an examination of all possible effects on inland container flows and their associated internal and external costs due to public and private initiatives in the field of port hinterland container logistics. The empirical analysis aims to evaluate the impact of a set of simultaneous policy options and operational measures on the competitiveness and sustainability of hinterland multimodal distribution of import and export containers handled at the seaports of the Campania region located in Southern Italy. The loading units can transit through the dry port facilities (the so called “interports”) located in the same region and/or through extra regional railway terminals, before reaching their ultimate inland destinations or the seaports. The integrated package of measures simulated by means of the model includes: (i) infrastructure policy, (ii) improvements of rail services, (iii) regulatory changes in terms of customs authorizations and procedures, (iv) removal of technical and legal barriers to fair and non-discriminatory competition in the market of rail traction between regional seaports and interports, (v) new business models integrating container logistics operations between seaports and interports, and (vi) social marginal cost charging of transport operations. Once this package of instruments is introduced, higher private and social cost efficiency of port hinterland container distribution through the investigated regional logistics system can be achieved. For instance, it has been estimated an annual saving of the order of about 12,660 tonnes of CO₂ equivalent emissions from transport corresponding to an external cost reduction of 0.27 million euros from the observed real life situation, whereas the estimated saving in terms of air pollution (CO, NO_x, PM, SO₂, VOC) from transport is approximately 220 tonnes per year corresponding to an external benefit of 1.31 million euros.The most immediate priority appears to be the customs and intermodal logistics integration of seaports and interports by means of full implementation of the “extended gateway” concept as a way to increase the rail share of modal split and improve the overall cost efficiency of the system. In addition, the simultaneous introduction of a social marginal cost charging policy can contribute to make the regional interports a viable solution to expand the hinterland reach of the regional seaport cluster.     

An assessment of the performance of the European long intermodal freight trains (LIFTS)

Intermodal rail/road freight transport has always been considered as a competitive alternative to its road freight counterpart in the European medium- to long-distance corridors (markets). Such consideration has been based on the increasing competitiveness of some innovative rail services and the existing and prospective performance of both modes in terms of the full social – internal or operational and external – costs. The most recent innovation of rail technologies and related services launched by some European railway companies, still at the conceptual level, is the Long Intermodal Freight Train (LIFT). This is supposed to be a block train operating in long-distance corridors (markets) with a substantial and regular freight demand.This paper develops analytical models for assessing the performance of the LIFTs, the already-operating Conventional Intermodal Freight Trains (CIFTs), and their road counterpart as well. The performance consists of the full – internal (private) and external – costs of the door-to-door delivery of loading units – containers, swap-bodies, and semi-trailers. The internal costs embrace the operational costs of the transport (rail and road) and intermodal terminal operators. The external costs include the costs of the impacts of door-to-door delivery of loading units on society and the environment. These negative externalities include noise, air pollution, traffic accidents, and congestion.The models are applied to a simplified version of intermodal and road transport system using inputs from the European freight transport sector. The aims are to compare the full costs of particular modalities in order to investigate the potential of the LIFTs as compared with the CIFTs in improving the internal efficiency of the rail freight sector and its competitiveness with respect to its road counterpart. In addition, the paper attempts to assess some effects on the potential modal shift of EU (European Union) transport policies on internalizing transport externalities.     

Intermodal freight transport planning – A receding horizon control approach

This paper investigates intermodal freight transport planning problems among deep-sea terminals and inland terminals in hinterland haulage for a horizontally fully integrated intermodal freight transport operator at the tactical container flow level. An intermodal freight transport network (IFTN) model is first developed to capture the key characteristics of intermodal freight transport such as the modality change phenomena at intermodal terminals, physical capacity constraints of the network, time-dependent transport times on freeways, and time schedules for trains and barges. After that, the intermodal freight transport planning problem is formulated as an optimal intermodal container flow control problem from a system and control perspective with the use of the proposed IFTN model. To deal with the dynamic transport demands and dynamic traffic conditions in the IFTN, a receding horizon intermodal container flow control (RIFC) approach is proposed to control and to reassign intermodal container flows in a receding horizon way. This container flow control approach involves solving linear programming problems and is suited for transport planning on large-sized networks. Both an all-or-nothing approach and the proposed RIFC approach are evaluated through simulation studies. Simulation results show the potential of the proposed RIFC approach.     

Estimating potential reductions in externalities from rail-road substitution in Trans-European freight transport corridors

This paper develops a method for analysing and estimating savings in externalities that could be achieved by substituting truck with rail freight services in a given Trans-European freight transport corridor. The externalities affected include energy consumption, emissions of greenhouse gases, noise, congestion, and traffic incidents/accidents. The European Commission transport policy aims to provide an institutional framework for the medium- to long-term sustainable development of the transport sector. An important aspect of this policy is to stimulating the modal shift from truck to rail freight transport in inland Trans-European corridors.     

A cost and CO2 comparison of using trains and higher capacity trucks when UK FMCG companies collaborate

Companies working in a collaboration are able to achieve higher vehicle capacity utilisation and reduced empty running, resulting in lower costs and improved sustainability through reduced emissions and congestion. Collaboration produces higher volumes of goods to be moved than individual companies which means that further efficiencies may be possible by relaxing the freight mode constraints and considering rail and higher capacity vehicles. This paper explains how real world data has been used in a model to quantify the economic and environmental benefits in the FMCG sector delivered through collaboration utilising road and rail freight modes. Data for one month was provided by 10 FMCG companies and included freight transport flows between depots and customers, inter depot movements, and supplier collections. Detailed road and rail costs and operating characteristics were obtained and, with the transport flows, applied to a network design model which was used to validate the company data sets. A strategy examining the potential use of alternative higher capacity vehicles and rail for the flows between nine regional consolidation centres showed cost and CO₂ savings. Just under half the inter-regional flows benefited from double deck trailers, longer heavier vehicles for 30% of the flows and rail with different wagon configurations for the rest. In summary there was a 23% reduction in cost with 58% fewer road kilometres and a 46% reduction in CO₂ emissions. The ability to backhaul the same mode of transport between most of the regional centres was one of the strengths of this strategy.     

Evaluation of Rail Freight Facilities Grant Funding in Britain

Abstract

Rail freight has been generally in decline in many European Union countries in recent years, contrary to European transport policy. State support for railway operations is commonplace in most countries, and this paper establishes the background to targeted rail freight grant funding in Britain. Through desk‐based analysis of Freight Facilities Grant (FFG) awards, together with a survey of recipient companies, the paper assesses the extent to which the planned flows expected from these awards have materialized and it evaluates the role of the grants in influencing rail freight volumes. The evidence suggests that FFG funding has been largely successful, attracting considerable private sector investment. Overall, FFGs have played an important role in developing or retaining rail freight flows, although the processes could be made more transparent and consistent. As other European countries liberalize their rail freight markets as a result of European Union legislation, such targeted funding may be an appropriate alternative to more general government subsidy of freight operations.     

Automated shunting of rail container wagons in ports and terminal areas

The development of intermodal container transport is hampered in part by the cost associated with the shunting of trains in marshalling yards, inland and port railway terminals. Many new technologies have been developed in the past decade, but have still not been applied because of high capital investment costs, lack of sufficient market demand and uncertain rates of return. The key for increasing the competitiveness of intermodal container transport by rail is the operation of heavy haul container trains between port and inland railway terminals more frequently with fast, flexible and automatic transhipment, shunting and coupling of container wagons. The operation of self-driven railcars equipped with automatic centre coupling on terminal tracks, which can also be train-hauled on conventional hinterland railway lines, would enable a reduction of shunting and transhipment time and costs in intermodal container terminals by more than 30%.     

September 11 and the World Airline Financial Crisis

Abstract

This paper analyses the effectiveness of policy measures aimed at triggering a modal shift in the freight transport market. The analysis is based on the inventory‐theoretic framework that studies modal choice from a business logistics viewpoint. The crux of the inventory‐theoretic approach lies in the fact that explicit attention is paid to all costs in the supply chain that are affected by the choice of transport mode. After a brief literature review on the inventory‐theoretic framework, the framework is used to calculate the market shares of different freight transport modes for a hypothetical transport market. In a second step, the impact of some policy measures on the market shares of the transport modes is calculated. By way of illustration, the analysis is applied to the market for container transport from a seaport to its hinterland. It is shown that a combination of certain policy measures can lead to significant modal shifts from road transport to intermodal transport.     

Breakthrough innovations in intermodal freight transport

Breakthrough innovations, whether technological, organizational or both, are a necessity if the market share of intermodal freight transport is to expand. The main growth potential lies in the markets for flows over short distances, for perishable and high-value commodities, for small consignments, and for flows that demand speed, reliability and flexibility. It will take radical innovations to produce a breakthrough in the modal split and allow these new markets to be conquered. This special issue is based on papers presented at an international conference on freight transport automation and multimodality, held in Delft in May 2002, that are illustrative of the direction of breakthrough research and development (R&D) aimed at increasing the market share for intermodal transport.     

New routes on old railways: increasing rail’s mode share within the constraints of the existing railway network

This paper describes an integrated methodology for identifying potential ‘quick wins’ for mode shift from road to passenger rail transport. Firstly, a procedure for analysing rail’s relative competitiveness in the market for passenger transport between large urban areas is developed and then applied to a UK case study. The purpose of such analysis is to allow the identification of flows where rail is currently relatively uncompetitive (in terms of journey time in particular) and to assess the reasons for this poor performance, so that the issues which suppress rail use may be addressed. In parallel, a framework, methodology and tool for the assessment of existing and potential capacity (trains, seats, TEUs, etc.) is developed for both passenger and freight traffic, to identify and address network constraints. An illustrative example of the use of these demand and capacity assessment tools is then presented, with the tools used to identify and evaluate flows where rail demand is suppressed by poor service quality and where spare capacity exists which would allow the passenger rail service to be improved without requiring significant investments in infrastructure. The effects of such improvements on demand are predicted, and the cost implications of operating such additional services are discussed. The analysis suggests that there may be significant potential for increasing rail’s mode share by providing additional inter-urban services where rail currently offers an inferior service.     

Container Railfreight Services in North‐west Europe: Diversity of Organizational Forms in a Liberalizing Environment

Abstract

The institutional environment of rail transport has changed as a result of recent European directives, but the changes have taken different forms from one country to another. In the case of international maritime chains, the development of door‐to‐door services makes inland haulage from the loading and discharging ports extremely important, and it highlights the need to reshape the rail freight industry. This paper analyses the degree of involvement of different actors drawn from the maritime industry in developing and commercializing rail services in the changing regulatory environment. Several maritime operators, shipping lines, port‐handling companies and port authorities have been involved in some container rail services since the early days of liberalization. Their commitments take very different forms, however. Whereas contracts are mainly used for the provision of service, particularly for train haulage, integration by means of shareholding or creating subsidiaries or joint ventures is used for marketing. Important differences between France, the UK, Germany and the Netherlands are detailed. In the latter two countries, there is more involvement in the provision of rail services. Marketing rail services appear to be the main strategic issue for the maritime operators in all four countries     

Energy conservation and intercity freight transport

In this paper, the characteristics of intercity freight modal operations are investigated to evaluate the potential for achieving energy savings. It is determined that the greatest opportunities for conserving energy appear to rest with achieving modal shifts and operational improvements in truck and rail transport. To test this hypothesis, intercity truck and rail freight operations are analyzed to determine the relationships between energy consumption and the delivery of transport service. The energy consumption impact of alternative conservation measures are calculated, and in turn, evaluated in light of a series of institutional constraints. As such, this study goes beyond the characteristic cataloging of alternative energy conservation measures by conducting a disaggregated assessment of the effectiveness and feasibility of implementing such measures. This paper concludes that the potential for achieving energy conservation in the movement of intercity freight in general, and by truck and rail systems in particular, is limited, as well as shrouded by the complexity of the nature of the commodity itself, the commodity flow characteristics, and the market and institutional structure.     

Economic valuation of Well-To-Wheel CO2 emissions from freight transport along the main transalpine corridors

CO₂ emissions are one of the main externalities related to freight transport. Their evaluation is extremely difficult, due to the presence of several scientific and economic uncertainties. This paper discusses the approaches currently adopted by literature to deal with CO₂, proposing a methodology based on a Well-To-Wheel quantification and an economic valuation deriving from a meta-regression. A freight transport analysis is then provided for one of the most critical areas of Europe, the Alps. Here, the different approaches adopted by the single nations determine divergent results in terms of modal shift towards rail and, consequently, CO₂ emissions. An integrated and transnational strategy could lead to better results, avoiding detoured traffic and increasing the share of railway traffic. To this aim, the carbon impacts of three specific alpine-wide measures are evaluated: namely, Alpine Crossing Exchange, Emissions Trading and Differentiated Toll System. In comparison with business-as-usual scenario, the case study reveals a potential CO₂ saving up to more than 600,000 tons and 38 M€ for the year 2030, thus providing policy makers with an integrative transnational tool able to evaluate the long-term carbon impact of their transport decisions.     

Exchange rate and transport cost sensitivities of bilateral freight flows between the US and China

This paper explores the long-run impacts of gross domestic product, exchange rate, and transport costs on bilateral air and ocean freight flows between the US and China. The study employs a cointegration framework by using export and import data over the period of 2003:Q1-2014:Q2. Results show that gross domestic product is the key determinant of bilateral freight flows, indicating that real income of a trading partner is a driving force of the bilateral freight flows between the US and China. In examining the sensitivities of the bilateral trade flows, air freight flows are found to be more responsive to a real income change than ocean freight flows. The bilateral exchange rate is a significant factor affecting the freight flows from China to the US, suggesting that a US dollar appreciation against the Chinese yuan increases the inflows of Chinese commodities to the US. The impacts of the bilateral exchange rate and transport cost are found to vary at industry and commodity levels. These findings support the importance of employing disaggregate data in the bilateral freight flow analysis.     

Migration of railway freight transport from command economy to market economy: The case of China

In recent years, Chinese railway freight transport has been facing great challenges from transport market reformation and economic expansion. Although the total volume of railway freight has been increasing, its market share has decreased greatly, especially at the beginning of migration from command economy to market economy. This paper considers four aspects believed to be responsible for the loss of the railway freight market share. First, we review the history and current situation of the Chinese railway freight transport and study the relationship between economic development and freight transport in China. Second, the causes resulting in the loss of the market share of railway freight are analysed in detail. Third, the current measures taken by Chinese Railways (CR) to restore its competitiveness are discussed. The effects of these measures on railway traffic volume, market share and productivity are also studied. Finally, the way forward for the future of CR is discussed. It is concluded that CR has not yet adapted sufficiently to new economic conditions, although in recent years progress has been made. Further reform will be needed.     

The European freight railway system as a hub-and-spoke network

This paper addresses a hub-and-spoke network problem for railroad freight, where a central planner is to find transport routes, frequency of service, length of trains to be used, and transportation volume. Hub-and-spoke networks, often found in air freight, have not been favoured by railways in the past. Such a structure could be profitable, however, if there exist concentrated freight flows on some service links. We formulate a linear integer programming model whose objective function includes not only the typical operational cost, but also cost due to the transit time spent by freight in the network. We then develop heuristic algorithms to solve large scale instances occurring in rail freight systems in France plus Italy; Germany; and a 10-country European network. By assuming that every node is equipped with consolidation capability, we let the final solution naturally reveal potential hub locations, the impact of several of which is studied by sensitivity analysis.     

Traffic Noise in Europe: A Comparison of Calculation Methods,Noise Indices and Noise Standards for Road and Railroad Traffic in Europe

The demand for inland freight transport in Europe is mainly met by road transport, leading to unsustainable impacts such as air pollution, greenhouse gas emissions and congestion. Since rail transport has lower externalities than road transport, a modal shift from road to rail is an accepted policy goal for achieving a more sustainable and competitive transport system. However, intermodal road–rail transport is mainly competitive for long-distance transport, and as a consequence, the potential for modal shift is limited. The cost efficiency of road–rail intermodal transport is particularly sensitive to pre- and post-haulage (PPH) costs, since this activity typically has a larger cost compared with its share of the total distance in the transport chain. For intermodal transportation over shorter distances, for example, below 300 km and where there are substantial PPH activities at both ends of the chain, the competitiveness of the intermodal transport system compared with that of direct road is low. Improving the efficiency of PPH activities is, therefore, of utmost importance for the competitiveness of the intermodal transport system. This paper looks into the issue of improving the cost efficiency of an intermodal transport chain by implementing an innovative and flexible legal framework regarding the PPH activities in the chain. By extending the legal framework with exemptions for longer vehicles in PPH, the cost efficiency could be greatly improved. The purpose of such a framework is to allow and enable, for PPH exclusively, the use of 2?×?40 foot or even two semi-trailers using only one vehicle in the context of the Swedish regulatory framework. This paper develops a strategic calculation model for assessing and investigating the consequences of such a framework and investigates the framework's potential in terms of cost efficiency. The model in combination with a sensitivity analysis of input variables gives a comprehensive understanding of the effects of PPH under different circumstances. From the results, it is evident that there are substantial positive effects associated with a PPH framework of longer vehicles. Results indicate that a typical shipper may experience cost reductions of about 5–10% of the total costs of the intermodal transport chain. In summary, a more innovative and flexible legal framework regarding vehicle length in the PPH links can contribute to a greater modal shift, improved cost efficiency and more environmentally friendly transportation systems.     

Stochastic freight flow patterns: implications for fleet optimization

Trucking, rail and other types of transportation networks share the common feature of moving equipment and crews between spatially separated terminals to accommodate the transportation of goods or people. This paper develops measures for temporal and spatial imbalances in freight flows, and applies these measures to a major trucking network. Fundamentally, the randomness inherent to a system of terminals is mitigated by pooling freight flows among terminal groups, and by pooling freight flows over many time periods. In the terminal network that we examined, long-run freight imbalances ensure that empty equipment movements must equal or exceed 13.3% of loaded movements at individual terminals and 8.2% of loaded movements at terminal groups. Due to short-run freight imbalances, the number of empty movements could increase by about 50% over the long-run average; greater increases would occur if equipment flows must be balanced on each travel lane. ©     

Determinants of modal choice in freight transport

In the next few years, exciting developments in the field of freight transport are likely to occur. The Channel Tunnel will be perceived as giving railways much greater distance of operation, compared to the current train ferry to/from Great Britain. The further development of swap-body technology will allow easier modal transfer and the creation, in 1992, of a single market in Europe will transform the pattern of trade. All of these are likely to have significant impacts on modal choice, and hence modal split, in freight transport. Reappraisal by many firms of the modes of transport used is likely but will it result in a net transfer of freight from road to rail and, if so, to what extent? To answer such questions, an accurate and reliable method of predicting modal split is required. Research in the past has concentrated on the development of modal split models based on generalised costs. These fail to explain adequately the prevalence of road freight in the UK. From surveys of freight managers within industry, it is clear that models to date rely too heavily on the economic cost factor and too little on behavioural factors (Jeffs 1985). This paper derives from a recent study of freight transport modal choice from the standpoint of the transport decision-maker within the firm. It attempts to shed light on the actual parameters which should be incorporated into a modal split model. Many variables appear to exert an influence on modal choice decision-making process. However, it is possible to categorise them into six main groups, namely: customer-requirements; product-characteristics; company structure/organisation; government interventions; available transport facilities; and perceptions of the decision-maker him/herself. It is the interactions and inter-relationships between these which ultimately determine freight modal split. This study has shown that the relationship between the outcome of the transport decision process and the values of particular determinants of modal split is not straight-forward, due to the complexity and variety of interactions involved. Perhaps one of the main reasons for researchers' failure hitherto to develop a successful modal-split model has been the preoccupation with techniques that rely on the development of common metric (e.g. generalised cost), which has led to the exclusion of some important explanatory variables along quite different dimensions. Another important issue concerns the appropriate level of aggregation. In order not to reduce the explanatory power of the key variables, it is important to work at a disaggregate level, although this does make substantial demands on data. The use of factor analysis enables both the aggregation of information without loss of behavioural reality and the specification of variables in terms of a common metric. In conclusion, freight transport has usually been examined within too narrow a framework. It must be placed firmly within the context of the total industrial process. The demand for freight transport is directly influenced by the level, composition and geographical distribution of production and consumption activities. Freight flows are complex and so it is highly unlikely that a universal mode-choice model can ever be developed. Future research should, therefore, be directed towards developing partial models in response to specific needs of those involved in decision-taking in the freight sector.