共查询到20条相似文献,搜索用时 9 毫秒
1.
为提高纯电动汽车再生制动能量回收的效率并保证汽车行驶安全性,通过理想制动力分配曲线对前、后轮的制动力分配系数进行分配,采用模糊控制策略分配驱动轮再生制动力,然后使用遗传算法对模糊控制器隶属度函数进行优化,并进行仿真实验。结果表明,经过遗传算法优化的模糊控制器能够明显提高再生制动能量的回收效率。 相似文献
2.
采用瑞典圆法计算滑面为圆弧时边坡的安全系数,并在遗传算法中增加Powell算法作为局部搜索过程,从而在保证遗传算法良好的全局搜索能力的同时,也提高了遗传算法的搜索速度。采用改进后的遗传算法搜索边坡的最小安全系数及与之相对应的滑动面,结合公路边坡工程实例检验了所提出方法的有效性。 相似文献
3.
遗传算法是一种模拟生物进化过程的优化算法,可用于求解包含离散化变量的复杂优化问题,文章将遗传算法应用于配电网无功优化,介绍了混沌遗传算法的具体步骤,并将该算法对IEEE30节点系统进行了无功优化计算,将结果与遗传算法得到的结果进行比较,表明混沌遗传算法应用于无功优化是合理可行的。 相似文献
4.
采用瑞典圆法计算滑面为圆弧时边坡的安全系数,并在遗传算法中增加Powell算法作为局部搜索过程,从而在保证遗传算法良好的全局搜索能力的同时,也提高了遗传算法的搜索速度.采用改进后的遗传算法搜索边坡的最小安全系数及与之相对应的滑动面,结合公路边坡工程实例检验了所提出方法的有效性. 相似文献
5.
6.
7.
基于遗传算法的物流配送路径优化问题研究 总被引:48,自引:0,他引:48
在建立物流本着路径优化问题数学模型的基础上,构造了求解该问题的遗传算法,并进行了实验计算,计算结果表明,用遗传算法进行物流本着路径优化,可以方便有效地求得问题的最优解或近似最优解。 相似文献
8.
9.
基于块体理论进行隧道轴线走向优化的研究 总被引:1,自引:0,他引:1
首先介绍了块体理论的基本原理和裂隙岩体结构面随机统计分析方法,并对遗传算法提出了改进措施。进而结合3座隧道围岩的裂隙结构面特征参数值统计,运用关键块体理论和赤平投影解析法,模拟和分析了3组典型节理结构面下隧道在不同走向时关键块体的位置、大小及稳定性发生的变化,并与实际调查情况进行了对比分析,最后运用改进的遗传算法编程,推算出节理结构面在特征区间内隧道轴线的最优走向。研究结果表明,借助关键块体理论及改进的遗传算法进行隧道轴线走向的优化是经济可行的。 相似文献
10.
遗传算法是一种模拟生命进行机制的搜索和优化方法,其全局优化和隐含并行性的特点使得遗传算法能适应求解大规模的复杂优化问题。本文从遗传算法的基本原理着手,阐述了遗传算法在汽车动力性、经济性优化中的应用。 相似文献
11.
This paper deals with the lane assignment problem in the Automated Highway Systems (AHS). The purpose of lane assignment strategies
is to increase throughput on multi-lane highways with many entry and exit points, based on the itineraries of vehicles using
the highway (point of entry, time of entry and exit point) and the effects of maneuvers. Using partitioned lane assignment
strategies, the lane assignment problem is formulated as an optimization problem to find the proper positions of partitions.
Then the optimal problem is solved using a Genetic Algorithm (GA). The proposed algorithm has been validated by comparing
its solution with that of an all-cases algorithm for a simple case. Moreover, a traffic simulator with a realistic car-following
model as well as lane change logic has been developed. The simulation results show the efficiency of the proposed genetic
algorithm, compared with random assignment algorithms. 相似文献
12.
针对广义最小生成树问题,设计了2种改进的元启发式算法来求解:单亲遗传模拟退火算法和改进的禁忌搜索算法。通过综合遗传算法和模拟退火算法的优点,提出了单亲遗传和模拟退火的混合算法,并设计了自适应选择法和自适应基因重组操作;在改进的禁忌搜索算法中,通过在2种邻域进行搜索来避免陷入局部最优。数值实验验证了算法的有效性。 相似文献
13.
14.
15.
16.
17.
文化遗传算法用于装载机工作装置优化计算研究 总被引:1,自引:0,他引:1
本文以装载机工作装置的连杆机构作为研究对象,以Matlab作为工具软件,应用文化遗传算法对装载机的连杆机构进行优化。优化结果表明,文化遗传算法对于本问题的优化具有较高的效率,通过优化提高了装载机连杆机构的传力比。 相似文献
18.
Genetic Algorithm (GA) and Singular Value Decomposition (SVD) are deployed for optimal design of both the Gaussian membership
functions of antecedents and the vector of linear coefficients of consequents, respectively, of ANFIS networks. These networks
are used for stiffness modelling and prediction of rubber engine mounts. The aim of such modelling is to show how the stiffness
of an engine mount changes with variations in geometric parameters. It is demonstrated that SVD can be optimally used to find
the vector of linear coefficients of conclusion parts using ANFIS (Adaptive Neuro-Fuzzy Inference Systems) models. In addition,
the Gaussian membership functions in premise parts can be determined using a GA. In this study, the stiffness training data
of 36 different bush type engine mounts were obtained using the finite element analysis (FEA). 相似文献
19.
城市快速路AVI检测设施布局仿真优化 总被引:1,自引:0,他引:1
针对城市快速路车辆自动识别(AVI)系统行程时间检测与动态OD矩阵获取的双重目标,在检测器数量及检测精度有限的条件下,提出了城市快速路AVI检测设施布局优化模型与提高OD估计精度的车辆转向率法;应用Visual Basic编程语言通过Vissim组件对象模型接口建立了基于微观仿真的城市快速路AVI检测设施布局仿真优化平台,可对AVI检测设施布局优化模型进行"软件在环"的仿真评价,进而得出优化的布局方案。以上海市南北高架快速路AVI设施布局为例验证了AVI设施布局仿真优化的科学性,在90%检测精度条件下得到OD矩阵范数平均相对误差NMRE〈25%,需要检测器布设断面密度达到85%,并总结了城市快速路AVI设施布局的3条主要原则。 相似文献
20.
Santiago Gregori Manuel Tur Enrique Nadal Francisco Javier Fuenmayor 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2018,56(8):1162-1186
The quality of current collection becomes a limiting factor when the aim is to increase the speed of the present railway systems. In this work an attempt is made to improve current collection quality optimising catenary geometry by means of a genetic algorithm (GA). As contact wire height and dropper spacing are thought to be highly influential parameters, they are chosen as the optimisation variables. The results obtained show that a GA can be used to optimise catenary geometry to improve current collection quality measured in terms of the standard deviation of the contact force. Furthermore, it is highlighted that apart from the usual pre-sag, other geometric parameters should also be taken into account when designing railway catenaries. 相似文献