Travel demand forecasts improved by using cross-sectional data from multiple time points

Forecasts of travel demand are often based on data from the most recent time point, even when cross-sectional data is available from multiple time points. This is because forecasting models with similar contexts have higher transferability, and the context of the most recent time point is believed to be the most similar to the context of a future time point. In this paper, the author proposes a method for improving the forecasting performance of disaggregate travel demand models by utilising not only the most recent dataset but also an older dataset. The author assumes that the parameters are functions of time, which means that future parameter values can be forecast. These forecast parameters are then used for travel demand forecasting. This paper describes a case study of journeys to work mode choice analysis in Nagoya, Japan, using data collected in 1971, 1981, 1991, and 2001. Behaviours in 2001 are forecast using a model with only the most recent 1991 dataset and models that combine the 1971, 1981, and 1991 datasets. The models proposed by the author using data from three time points can provide better forecasts. This paper also discusses the functional forms for expressing parameter changes and questions the temporal transferability of not only alternative-specific constants but also level-of-service and socio-economic parameters.     

A new generalized heterogeneous data model (GHDM) to jointly model mixed types of dependent variables

This paper formulates a generalized heterogeneous data model (GHDM) that jointly handles mixed types of dependent variables—including multiple nominal outcomes, multiple ordinal variables, and multiple count variables, as well as multiple continuous variables—by representing the covariance relationships among them through a reduced number of latent factors. Sufficiency conditions for identification of the GHDM parameters are presented. The maximum approximate composite marginal likelihood (MACML) method is proposed to estimate this jointly mixed model system. This estimation method provides computational time advantages since the dimensionality of integration in the likelihood function is independent of the number of latent factors. The study undertakes a simulation experiment within the virtual context of integrating residential location choice and travel behavior to evaluate the ability of the MACML approach to recover parameters. The simulation results show that the MACML approach effectively recovers underlying parameters, and also that ignoring the multi-dimensional nature of the relationship among mixed types of dependent variables can lead not only to inconsistent parameter estimation, but also have important implications for policy analysis.     

Evolution of latent modal captivity and mode choice patterns for commuting trips: A longitudinal analysis using repeated cross-sectional datasets

This paper presents an investigation of the temporal evolution of commuting mode choice preference structures. It contributes to two specific modelling issues: latent modal captivity and working with multiple repeated crossectional datasets. In this paper latent modal captivity refers to captive reliance on a specific mode rather than all feasible modes. Three household travel survey datasets collected in the Greater Toronto and Hamilton Area (GTHA) over a ten-year time period are used for empirical modelling. Datasets collected in different years are pooled and separate year-specific scale parameters and coefficients of key variables are estimated for different years. The empirical model clearly explains that there have been significant changes in latent modal captivity and the mode choice preference structures for commuting in the GTHA. Changes have occurred in the unexplained component of latent captivities, in transportation cost perceptions, and in the scales of commuting mode choice preferences. The empirical model also demonstrates that pooling multiple repeated cross-sectional datasets is an efficient way of capturing behavioural changes over time. Application of the proposed mode choice model for practical policy analysis and forecasting will ensure accurate forecasting and an enhanced understanding of policy impacts.     

Attitudinal and situational variables influencing urban mode choice: Some empirical findings

A mode choice decision structure incorporating traveler attitudes toward modes and situational constraints is investigated. The major hypothesis tested is that mode choice is determined primarily by situational constraints, such as auto ownership and income, secondly by the quality of alternative modes.The structure of the mode choice process is analyzed with respect to (1) applicability of certain choice criterion forms; (2) psychological weighting of modal attributes in the choice criterion; (3) strength of logit, probit, and discriminant functional forms; (4) the relative strength of socio-economic and attitudinal variables in predicting mode choice. An evaluation is made of 50 binary choice models fitted to a sample of 471 randomly drawn urban travelers. Results indicate that (1) the four choice criterion forms tested are all about equal in predictive strength; (2) psychological weighting has no effect on model strength, but does influence which modal attributes appear to determine choice; (3) the three functional forms tested are all about equal in strength; (4) situational factors account for 80–90% of variation explained by the models, attitudes toward modes 10–20%, thus confirming the primary hypothesis. Implications of these results for mode choice modeling and transit planning are discussed.This paper summarizes current research at the New York State Department of Transportation on the motivations and causes of travel behavior. Complete findings are available in Hartgen (1973).     

Analyzing commuter train user behavior: a decision framework for access mode and station choice

The purpose of the current research effort is to develop a framework for a better understanding of commuter train users’ access mode and station choice behavior. Typically, access mode and station choice for commuter train users is modeled as a hierarchical choice with access mode being considered as the first choice in the sequence. The current study proposes a latent segmentation based approach to relax the hierarchy. In particular, this innovative approach simultaneously considers two segments of station and access mode choice behavior: Segment 1—station first and access mode second and Segment 2—access mode first and station second. The allocation to the two segments is achieved through a latent segmentation approach that determines the probability of assigning the individual to either of these segments as a function of socio-demographic variables, level of service (LOS) parameters, trip characteristics, land-use and built environment factors, and station characteristics. The proposed latent segment model is estimated using data from an on-board survey conducted by the Agence Métropolitaine de Transport for commuter train users in Montreal region. The model is employed to investigate the role of socio-demographic variables, LOS parameters, trip characteristics, land-use and built environment factors, and station characteristics on commuter train user behavior. The results indicate that as the distance from the station by active forms of transportation increases, individuals are more likely to select a station first. Young persons, females, car owners, and individuals leaving before 7:30 a.m. have an increased propensity to drive to the commuter train station. The station model indicates that travel time has a significant negative impact on station choice, whereas, presence of parking and increased train frequency encourages use of the stations.     

Towards modal choice decision-making models: A case study of Lagos state transport corporation bus riders

Identification of the socioeconomic factors which affect the demand for buses, and the analysis of the use of the other transport modes by bus users are the two main objectives of this article. Work and school trips are highlighted as being very important trip purposes in Lagos metropolis by the multiple discriminant analysis model. It identifies mode of transport, distance, travel time, reliability, and the number of stops as significant mode choice variables. Multiple linear regression models for work and school trips identify mode of transport, transfort fare, travel time, annual income, and crew behaviour as significant variables in the choice of transport mode. These findings support the two alternative hypotheses of the study that the choice of bus is related to the individual perception of the quality of service of the different modes and that socioeconomic characteristics of the riders influence the patronage of buses. The attention of policy makers for the 22 transport corporations that operate inter-and intra-urban services in all the 21 states and the federal capital of Abuja in Nigeria is drawn to the importance of these variables for decisions.     

The relationship between transportation perceptions and behavior over time

The aim of this paper is to discuss cross-lagged panel analysis in terms of the causal inferences it generates about the relationship of beliefs about modes and mode choice behavior. Frequencies of use of the single-occupant automobile (SOA), bus and carpool, as well as beliefs about each of the modes, were collected from a sample of central business district commuters at two points in time. The belief variables for each mode were summed to form composite measures and were corrected for unreliability due to measurement error.Perceptions of each mode and the frequency of its use were analyzed for influences operating over time. A time interval was assumed to exist during which the variables causally operated on each other. It was assumed that the time necessary for an individual to change modes based on his perception was equivalent to the interval required for a person to alter perceptions based on his experience. The causal structure relating the two variables was also assumed to be stable over time. An additional assumption was required to distinguish between third variable effects, or spuriousness, and dual causation: if a third variable were to be causing the relationship, it would be operating at a relatively constant rate over time.A strong causal relationship was found to be operating between beliefs about SOA and bus and use of those modes over time. The relationship is mutually causative; beliefs determine behavior and behavior reinforces and changes perceptions. Analysis of the carpool data indicated that the causal structure had changed over time and could not be analyzed with this technique. In general, support is evidenced for an adaptation or learning process interpretation of the relationship between beliefs and mode choice behavior.     

Effects of incorporating latent and attitudinal information in mode choice models

Abstract

Hybrid choice modelling approaches allow latent variables in mode choice utility functions to be addressed. However, defining attitude and behavior as latent variables is influenced by the researcher's assumptions. Therefore, it is better to capture the effects of latent behavioral and attitudinal factors as latent variables than defining behaviors and attitudes per se. This article uses a hybrid choice model for capturing such latent effects, which will herein be referred to as modal captivity effects in commuting mode choice. Latent modal captivity refers to the unobserved and apparently unexplained attraction towards a specific mode of transportation that is resulting from latent attitude and behavior of passengers in addition to the urban transportation system. In empirical models, the latent modal captivity variables are explained as functions of different observed variables. Empirical models show significant improvement in fitting observed data as well as improved understanding of travel behavior.     

A least absolute deviation critical decision path analysis with transport applications

This paper introduces a method that simultaneously analyzes travel variables from stated preferences that are measured under each of several different assumptions. The method uses least absolute deviation estimators and linear programming solutions and is flexible enough to permit inclusion of constraints for ordinal data and latent variables. Travel behavior is characterized by different indicators such as travel time, waiting time, mode choice and departure time. Consideration of different response variables simultaneously as part of a stated preference model requires a reclassification of variables as either endogenous or exogenous. This concept was introduced by the author as structural conjoint analysis earlier. Each endogenous variable may be defined as nominal, ordinal or cardinal and may be either explicitly measured or latent. Current econometric and psychometric techniques cannot accommodate this variety of data. The procedure is essentially a two-stage least absolute deviation simultaneous equation regression. The estimation technique is well known as are the various hypothesis tests. In the method each relationship between endogenous and exogenous variables is formulated separately carefully incorporating assumptions about each type of data. Thus there are different formulations for endogenous variables that are nominal and latent, ordinal and explicit, ordinal and latent, cardinal and explicit and cardinal and latent. Formulations for nominal latent, ordinal explicit and cardinal explicit variables were tested with simulated data for three separate hypothetical problems. Each problem consisted of at least two different types of variables and the technique was found to be able to reproduce the simulation function coefficients in virtually all cases.     

Identifying variations and co-variations in discrete choice models

This study introduces an extended version of a standard multilevel cross-classified logit model which takes co-variations into account, i.e., variations jointly caused by two or more unobserved factors. Whilst focusing on mode choice behavior, this study deals with four different types of variation: spatial variations, inter-individual variations, intra-individual variations and co-variations between inter-individual and spatial variations. Such co-variations represent individual-specific spatial effects, reflecting different responses to the same space among individuals, which may for example be due to differences in their spatial perceptions. In our empirical analysis, we use data from Mobidrive (a continuous six-week travel survey) to clarify the existence of co-variation effects by comparing two models with and without co-variation terms. The results of this analysis indicate that co-variations certainly exist, especially for utility differences in bicycle and public transport use in comparison with car use. We then sequentially introduce four further sets of explanatory variables, examine the sources of behavioral variations and determine what types of influential factors are dominant in mode choice behavior.     

Accounting for stochastic variables in discrete choice models

The estimation of discrete choice models requires measuring the attributes describing the alternatives within each individual’s choice set. Even though some attributes are intrinsically stochastic (e.g. travel times) or are subject to non-negligible measurement errors (e.g. waiting times), they are usually assumed fixed and deterministic. Indeed, even an accurate measurement can be biased as it might differ from the original (experienced) value perceived by the individual.Experimental evidence suggests that discrepancies between the values measured by the modeller and experienced by the individuals can lead to incorrect parameter estimates. On the other hand, there is an important trade-off between data quality and collection costs. This paper explores the inclusion of stochastic variables in discrete choice models through an econometric analysis that allows identifying the most suitable specifications. Various model specifications were experimentally tested using synthetic data; comparisons included tests for unbiased parameter estimation and computation of marginal rates of substitution. Model specifications were also tested using a real case databank featuring two travel time measurements, associated with different levels of accuracy.Results show that in most cases an error components model can effectively deal with stochastic variables. A random coefficients model can only effectively deal with stochastic variables when their randomness is directly proportional to the value of the attribute. Another interesting result is the presence of confounding effects that are very difficult, if not impossible, to isolate when more flexible models are used to capture stochastic variations. Due the presence of confounding effects when estimating flexible models, the estimated parameters should be carefully analysed to avoid misinterpretations. Also, as in previous misspecification tests reported in the literature, the Multinomial Logit model proves to be quite robust for estimating marginal rates of substitution, especially when models are estimated with large samples.     

Valuing of attributes influencing the attractiveness of suburban train service in Mumbai city: A stated preference approach

The paper presents valuing of qualitative and quantitative travel attributes influencing the attractiveness of suburban train service in Mumbai city, India. A stated preference experiment is designed to capture the data of sub-urban train mode choice behavior. The behavioral data are analyzed using different modeling techniques such as multinomial logit (MNL) and mixed logit (ML). In ML model, the random parameters are assumed to follow constrained triangular distribution, where mean equals its spread. The decomposition of preference heterogeneity around the mean estimate of random parameter is also investigated using ML model. The study shows the influence of headway time and train ride time associated with a particular crowding level (expressed in density of standing passengers/m²) in choosing the sub-urban train mode by calculating their willingness-to-pay (WTP) values and highlights the importance of WTP for addressing policy issues in the reduction of in-vehicle crowding level. The present study documents new findings of the effect of crowding level on train ride time in the context of a developing country and suggests some important directions for future suburban train transport crowding valuation research.     

A behavioral analysis of freight mode choice decisions

This paper develops a behavioral analysis of freight mode choice decisions that could provide a basis for an acceptable analytical tool for policy assessment. The paper specifically examines the way that truck and rail compete for commodity movement in the US. Two binary mode choice models are introduced in which some shipment-specific variables (e.g. distance, weight and value) and mode-specific variables (e.g. haul time and cost) are found to be determinants. The specifications of the non-selected choice are imputed in a machine learning module. Shipping cost is found to be a central factor for rail shipments, while road shipments are found to be more sensitive to haul time. Sensitivity of mode choice decisions is further analyzed under different fuel price fluctuation scenarios. A low level of mode choice sensitivity is found with respect to fuel price, such that even a 50% increase in fuel cost does not cause a significant modal shift between truck and rail.     

Daily activity pattern recognition by using support vector machines with multiple classes

The focus of this paper is to learn the daily activity engagement patterns of travelers using Support Vector Machines (SVMs), a modeling approach that is widely used in Artificial intelligence and Machine Learning. It is postulated that an individual’s choice of activities depends not only on socio-demographic characteristics but also on previous activities of individual on the same day. In the paper, Markov Chain models are used to study the sequential choice of activities. The dependencies among activity type, activity sequence and socio-demographic data are captured by employing hidden Markov models. In order to learn model parameters, we use sequential multinomial logit models (MNL) and multiclass Support Vector Machines (K-SVM) with two different dependency structures. In the first dependency structure, it is assumed that type of activity at time ‘t’ depends on the last previous activity and socio-demographic data, whereas in the second structure we assume that activity selection at time ‘t’ depends on all of the individual’s previous activity types on the same day and socio-demographic characteristics. The models are applied to data drawn from a set of California households and a comparison of the accuracy of estimation of activity types and their sequence in the agenda, indicates the superiority of K-SVM models over MNL. Additionally, we show that accuracy in estimating activity patterns increases using different sets of explanatory variables or tuning parameters of the kernel function in K-SVM.     

Generation of synthetic datasets for discrete choice analysis

Despite the widespread use of synthetic data in discrete choice analysis, little is known about how the methodology used to generate synthetic datasets influences the properties of parameter estimates and the validity of results based on these estimates. That is, there are two potential sources of biases when using synthetic discrete choice data: (1) bias due to the method used to generate the dataset; and, (2) bias due to parameter estimation. The primary objective of this study is to examine bias due to the underlying data generation method. This study compares three methods for generating synthetic datasets and uses design of experiments and analysis of variance methods to investigate the ability to recover estimates for “true” logsum parameters for nested logit models. The method that uses nested logit probabilities to generate the chosen alternative results in unbiased parameter estimates. The method that is based on Gumbel error component approximations reveals that while the error components themselves are unbiased, subtle empirical identification problems can arise when these error components are combined with synthetically generated utility functions. The method that is based on normal error component approximations reveals that all logsum coefficients are biased upwards; the bias dramatically increases for those nests that have a low choice frequency and is most pronounced for those nests with high correlations among alternatives. Based on the results of the analysis, several recommendations for the generation of synthetic datasets for discrete choice analyses are provided.     

Misclassification in travel surveys and implications to choice modeling: application to household auto ownership decisions

Travel surveys that elicit responses to questions regarding daily activity and travel choices form the basis for most of the transportation planning and policy analysis. The response variables collected in these surveys are prone to errors leading to mismeasurement or misclassification. Standard modeling methods that ignore these errors while modeling travel choices can lead to biased parameter estimates. In this study, methods available in the econometrics literature were used to quantify and assess the impact of misclassification errors in auto ownership choice data. The results uncovered significant misclassification rates ranging from 1 to 40% for different auto ownership alternatives. Also, the results from latent class models provide evidence for variation in misclassification probabilities across different population segments. Models that ignore misclassification were not only found to have lower statistical fit but also significantly different elasticity effects for choice alternatives with high misclassification probabilities. The methods developed in this study can be extended to analyze misclassification in several response variables (e.g., mode choice, activity purpose, trip/tour frequency, and mileage) that constitute the core of advanced travel demand models including tour and activity-based models.

     

Policy Simulation for New BRT and Area Pricing Alternatives Using an Opinion Survey in Jakarta

Abstract

An area pricing scheme for Jakarta, Indonesia, is currently under review as a transportation control measure along with the operation of new bus rapid transit (BRT) system. While this scheme may be effective for congestion reduction in the central business district (CBD), provision of alternative means of transportation for auto users that are ‘pushed-out’ is of great importance to obtain public acceptance. Hence, it is necessary to simulate simultaneously the area pricing scheme and the BRT development which may serve as an alternative for assumed ‘pushed-out’ auto users. Utilizing data from an opinion survey, this paper studies how BRT and auto ridership are likely to vary as a function of traveler and system attributes. Additionally, the study attempts to evaluate the way this new travel mode is distinguished from other existing conventional transportation alternatives in Jakarta. The survey data contains socioeconomic information of over 1000 respondents as well as details of to-work/school trips to the CBD including mode, travel cost, time, etc. Respondents were asked about their willingness to shift from their current mode to BRT to make the same travel for different BRT fare levels. Modeling efforts suggest that a mixed logit model performs better in explaining choice behavior. Therefore, this model was used for policy simulation. The simulation results brought about many implications as to the tested policies. While the developed models may be applied only to future BRT corridors in which the survey was conducted, they capture the key variables that are significant in explaining mode choice behavior and present great potential for practical use in policy simulation and analysis in a large metropolitan area of the developing world.     

Exploring the influence of built environment on tour-based commuter mode choice: A cross-classified multilevel modeling approach

Understanding travel behavior and its relationship to urban form is vital for the sustainable planning strategies aimed at automobile dependency reduction. The objective of this study is twofold. First, this research provides additional insights to examine the effects of built environment factors measured at both home location and workplace on tour-based mode choice behavior. Second, a cross-classified multilevel probit model using Bayesian approach is employed to accommodate the spatial context in which individuals make travel decisions. Using Washington, D.C. as our study area, the home-based work (Home-work) tour in the AM peak hours is used as the analysis unit. The empirical data was gathered from the Washington-Baltimore Regional Household Travel Survey 2007–2008. For parameter estimation, Bayesian estimation method integrating Markov Chain Monte Carlo (MCMC) sampling is adopted. Our findings confirmed the important role that the built environment at both home location and work ends plays in affecting commuter mode choice behavior. Meanwhile, a comparison of different model results shows that the cross-classified multilevel probit model offers significant improvements over the traditional probit model. The results are expected to give a better understanding on the relationship between the built environment and commuter mode choice behavior.     

Should I stay or should I go? Investigating route switching behavior from revealed preferences data

A large variety of factors influence the route choice decisions of road users, and modelers consider these factors within the perceived utility that road users are assumed to maximize. However, this perceived utility may be different even for the same origin–destination pair and this leads road users to choose different routes for different trips. In this study, we focus on this particular phenomenon of route switching behavior by estimating discrete choice models with the aim of understanding the key factors at its foundation. The estimated route choice models account for route characteristics, socio-economic information, activity based data, inertial mechanism and learning effects, and they are applied to revealed preference data consisting of 677 actual day by day route choices (referred to 77 road users) collected by GPS in Cagliari (Italy). Route switching models were estimated with both fixed and random coefficient models. The model estimation results show that the variables referred to habit and learning have an important relevance on explaining the route switching phenomenon. Specifically, the higher is the travel habit, the less is the propensity of the road users to switch their route. Moreover, the learning effect shows that the accumulation of past experiences has more influence on the choice than the most recent ones.