Modelling waiting time for passengers transferring from rail to buses

This paper develops a mathematical model to calculate the average waiting time for passengers transferring from rail transit to buses based on the statistical analysis of primary data collected in Beijing. An important part of the average waiting time modelling is to analyse the distributions of passenger arrival rates. It is shown that the lognormal and gamma distributions have the best fit for direct transfer and non-direct transfer passengers, respectively. Subsequently, an average waiting time model for transferring passengers is developed based on passenger arrival rate distributions. Furthermore, case studies are conducted for two scenarios with real and estimated data, resulting in relative errors of ?3.69% and ?3.77%, respectively. Finally, the paper analyses the impacts of bus headway, the headway of rail cars, and the proportion of direct transfer passengers on average waiting time.     

Estimation of bus dwell time using univariate time series models

A significant proportion of bus travel time is contributed by dwell time for passenger boarding and alighting. More accurate estimation of bus dwell time (BDT) can enhance efficiency and reliability of public transportation system. Regression and probabilistic models are commonly used in literatures where a set of independent variables are used to define the statistical relationship between BDT and its contributing factors. However, due to technical and monetary constraints, it is not always feasible to collect all the data required for the models to work. More importantly, the contributing factors may vary from one bus route to another. Time series based methods can be of great interest as they require only historical time series data, which can be collected using a facility known as automatic vehicle location (AVL) system. This paper assesses four different time series based methods namely random walk, exponential smoothing, moving average (MA), and autoregressive integrated moving average to model and estimate BDT based on AVL data collected from Auckland. The performances of the proposed methods are ranked based on three important factors namely prediction accuracy, simplicity, and robustness. The models showed promising results and performed differently for central business district (CBD) and non‐CBD bus stops. For CBD bus stops, MA model performed the best, whereas for non‐CBD bus stops, ARIMA model performed the best compared with other time series based models. Copyright © 2014 John Wiley & Sons, Ltd.     

A model of bus bunching under reliability-based passenger arrival patterns

If bus service departure times are not completely unknown to the passengers, non-uniform passenger arrival patterns can be expected. We propose that passengers decide their arrival time at stops based on a continuous logit model that considers the risk of missing services. Expected passenger waiting times are derived in a bus system that allows also for overtaking between bus services. We then propose an algorithm to derive the dwell time of subsequent buses serving a stop in order to illustrate when bus bunching might occur. We show that non-uniform arrival patterns can significantly influence the bus bunching process. With case studies we find that, even without exogenous delay, bunching can arise when the boarding rate is insufficient given the level of overall demand. Further, in case of exogenous delay, non-uniform arrivals can either worsen or improve the bunching conditions, depending on the level of delay. We conclude that therefore such effects should be considered when service control measures are discussed.     

Passenger arrival and waiting time distributions dependent on train service frequency and station characteristics: A smart card data analysis

Waiting time at public transport stops is perceived by passengers to be more onerous than in-vehicle time, hence it strongly influences the attractiveness and use of public transport. Transport models traditionally assume that average waiting times are half the service headway by assuming random passenger arrivals. However, research agree that two distinct passenger behaviour types exist: one group arrives randomly, whereas another group actively tries to minimise their waiting time by arriving in a timely manner at the scheduled departure time. This study proposes a general framework for estimating passenger waiting times which incorporates the arrival patterns of these two groups explicitly, namely by using a mixture distribution consisting of a uniform and a beta distribution. The framework is empirically validated using a large-scale automatic fare collection system from the Greater Copenhagen Area covering metro, suburban, and regional rail stations thereby giving a range of service headways from 2 to 60 min. It was shown that the proposed mixture distribution is superior to other distributions proposed in the literature. This can improve waiting time estimations in public transport models. The results show that even at 5-min headways 43% of passengers arrive in a timely manner to stations when timetables are available. The results bear important policy implications in terms of providing actual timetables, even at high service frequencies, in order for passengers to be able to minimise their waiting times.     

Analytical model for calibrating delay at congested bus stops

Abstract

A model is proposed to calculate the overall operating and delay times spent at bus stops due to passenger boarding and alighting and the time lost to queuing caused by bus stop saturation. A formula for line demand at each stop and the interaction between the buses themselves is proposed and applied to different bus stops depending on the number of available berths. The application of this model has quantified significant operational delays suffered by users and operator due to consecutive bus arrival at stops, even with flows below bus stop capacity.     

Modeling the interaction between buses,passengers and cars on a bus route using a multi-agent system

This paper models part of a public transport network (PTN), specifically, a bus route, as a small-size multi-agent system (MAS). The proposed approach is applied to a case study considering a ‘real world’ bus line within the PTN in Auckland, New Zealand. The MAS-based analysis uses modeling and simulation to examine the characteristics of the observed system – autonomous agents interacting with one another – under different scenarios, considering bus capacity and frequency of service for existing and projected public transport (PT) demand. A simulation model of a bus route is developed, calibrated and validated. Several results are attained, such as when the PT passenger load is not close to bus capacity, this load has no effect on average passenger waiting time at bus stops. The model proposed can be useful to practitioners as a tool to model the interaction between buses and other agents.     

Optimizing coordinated transfer with probabilistic vehicle arrivals and passengers' walking time

Supporting efficient connections by synchronizing vehicle arrival time and passengers' walking time at a transfer hub may significantly improve service quality, stimulate demand, and increase productivity. However, vehicle travel times and walking times in urban settings often varies spatially and temporally due to a variety of factors. Nevertheless, the reservation of slack time and/or the justification of vehicle arrival time at the hub may substantially increase the success of transfer coordination. To this end, this paper develops a model that considers probabilistic vehicle arrivals and passengers walking speeds so that the slack time and the scheduled bus arrival time can be optimized by minimizing the total system cost. A case study is conducted in which the developed model is applied to optimize the coordination of multiple bus routes connecting at a transfer station in Xi'an, China. The relationship between decision variables and model parameters, including the mean and the standard deviation of walking time, is explored. It was found that the joint impact of probabilistic vehicle arrivals and passengers' walking time significantly affects the efficiency of coordinated transfer. The established methodology can essentially be applied to any distribution of bus arrival and passenger walking time. Copyright © 2017 John Wiley & Sons, Ltd.     

Bus arrival time calculation model based on smart card data

Bus arrival time is usually estimated using the boarding time of the first passenger at each station. However, boarding time data are not recorded in certain double-ticket smart card systems. As many passengers usually swipe the card much before their alighting, the first or the average alighting time cannot represent the actual bus arrival time, either. This lack of data creates difficulties in correcting bus arrival times. This paper focused on developing a model to calculate bus arrival time that combined the alighting swiping time from smart card data with the actual bus arrival time by the manual survey data. The model was built on the basis of the frequency distribution and the regression analysis. The swiping time distribution, the occupancy and the seating capacity were considered as the key factors in creating a method to calculate bus arrival times. With 1011 groups of smart card data and 360 corresponding records from a manual survey of bus arrival times, the research data were divided into two parts stochastically, a training set and a test set. The training set was used for the parameter determination, and the test set was used to verify the model’s precision. Furthermore, the regularity of the time differences between the bus arrival times and the card swiping times was analyzed using the “trend line” of the last swiping time distribution. Results from the test set achieved mean and standard error rate deviations of 0.6% and 3.8%, respectively. The proposed model established in this study can improve bus arrival time calculations and potentially support state prediction and service level evaluations for bus operations.     

Bus arrival time prediction at bus stop with multiple routes

Provision of accurate bus arrival information is vital to passengers for reducing their anxieties and waiting times at bus stop. This paper proposes models to predict bus arrival times at the same bus stop but with different routes. In the proposed models, bus running times of multiple routes are used for predicting the bus arrival time of each of these bus routes. Several methods, which include support vector machine (SVM), artificial neural network (ANN), k nearest neighbours algorithm (k-NN) and linear regression (LR), are adopted for the bus arrival time prediction. Observation surveys are conducted to collect bus running and arrival time data for validation of the proposed models. The results show that the proposed models are more accurate than the models based on the bus running times of single route. Moreover, it is found that the SVM model performs the best among the four proposed models for predicting the bus arrival times at bus stop with multiple routes.     

Train scheduling for minimizing passenger waiting time with time-dependent demand and skip-stop patterns: Nonlinear integer programming models with linear constraints

This paper focuses on how to minimize the total passenger waiting time at stations by computing and adjusting train timetables for a rail corridor with given time-varying origin-to-destination passenger demand matrices. Given predetermined train skip-stop patterns, a unified quadratic integer programming model with linear constraints is developed to jointly synchronize effective passenger loading time windows and train arrival and departure times at each station. A set of quadratic and quasi-quadratic objective functions are proposed to precisely formulate the total waiting time under both minute-dependent demand and hour-dependent demand volumes from different origin–destination pairs. We construct mathematically rigorous and algorithmically tractable nonlinear mixed integer programming models for both real-time scheduling and medium-term planning applications. The proposed models are implemented using general purpose high-level optimization solvers, and the model effectiveness is further examined through numerical experiments of real-world rail train timetabling test cases.     

Passenger waiting time and information acquisition using automatic vehicle location for verification

Bus riders utilize a variety of information media to learn how to travel to their destinations and to learn when they should arrive at bus stops. As part of the OCTA (Orange County Transit Authority) Transit Probe evaluation, 1199 passengers were surveyed to measure relationships between information acquisition and waiting time. A unique aspect of the survey was that some of the data could be correlated with automatic‐vehicle‐location (AVL) measurements of bus lateness at stops. Insights are provided as to the types of information riders acquire based on the nature of the trip and demographic characteristics. Insights are also provided as to factors affecting perceived waiting time. We found age group, whether a person needs to arrive at a destination by a specific time, primary language, and whether the person is a first‐time user of the bus line to be significant causal factors.     

Metro disruption management: Optimal initiation time of substitute bus services under uncertain system recovery time

Determining the initiation time of substitute bus (SB) services is critical for metro disruption management, especially under uncertain recovery time. This study develops a mathematical formulation to determine the optimal initiation time (OIT) of SB services by trading-off their initiation cost and passenger delay cost, thereby minimizing the total system cost. Given the probability distribution of metro disruption duration, we determine the OIT by formulating an optimization problem to minimize the expected total system cost. We then conduct sensitivity analyses of the initiation cost of SB services, passenger value of time, and SB services rate. The results show that SB services ought to be activated only if the metro incident lasts longer than a certain time interval, depending on the factors mentioned earlier, and the OIT should advance with the predicted incident duration. This paper derives analytical results for the case of linear passenger arrival, and determines the results numerically for the case of non-linear passenger arrival when analytical closed-form solutions are not available. The findings will facilitate transit operators to develop response plans in the aftermath of a metro disruption.     

Development of a probabilistic model to optimize disseminated real‐time bus arrival information for pre‐trip passengers

In the advent of Advanced Traveler Information Systems (ATIS), the total wait time of passengers for buses may be reduced by disseminating real‐time bus arrival times for the next or series of buses to pre‐trip passengers through various media (e.g., internet, mobile phones, and personal digital assistants). A probabilistic model is desirable and developed in this study, while realistic distributions of bus and passenger arrivals are considered. The disseminated bus arrival time is optimized by minimizing the total wait time incurred by pre‐trip passengers, and its impact to the total wait time under both late and early bus arrival conditions is studied. Relations between the optimal disseminated bus arrival time and major model parameters, such as the mean and standard deviation of arrival times for buses and pre‐trip passengers, are investigated. Analytical results are presented based on Normal and Lognormal distributions of bus arrivals and Gumbel distribution of pre‐trip passenger arrivals at a designated stop. The developed methodology can be practically applied to any arrival distributions of buses and passengers.     

Bus running time prediction using a statistical pattern recognition technique

Abstract

Given that real-time bus arrival information is viewed positively by passengers of public transit, it is useful to enhance the methodological basis for improving predictions. Specifically, data captured and communicated by intelligent systems are to be supplemented by reliable predictive travel time. This paper reports a model for real-time prediction of urban bus running time that is based on statistical pattern recognition technique, namely locally weighted scatter smoothing. Given a pattern that characterizes the conditions for which bus running time is being predicted, the trained model automatically searches through the historical patterns which are the most similar to the current pattern and on that basis, the prediction is made. For training and testing of the methodology, data retrieved from the automatic vehicle location and automatic passenger counter systems of OC Transpo (Ottawa, Canada) were used. A comparison with other methodologies shows enhanced predictive capability.     

Analysis of real-time control strategies in a corridor with multiple bus services

Control strategies have been widely used in the literature to counteract the effects of bus bunching in passenger‘s waiting times and its variability. These strategies have only been studied for the case of a single bus line in a corridor. However, in many real cases this assumption does not hold. Indeed, there are many transit corridors with multiple bus lines interacting, and this interaction affects the efficiency of the implemented control mechanism.This work develops an optimization model capable of executing a control scheme based on holding strategy for a corridor with multiple bus lines.We analyzed the benefits in the level of service of the public transport system when considering a central operator who wants to maximize the level of service for users of all the bus lines, versus scenarios where each bus line operates independently. A simulation was carried out considering two medium frequency bus lines that serve a set of stops and where these two bus lines coexist in a given subset of stops. In the simulation we compared the existence of a central operator, using the optimization model we developed, against the independent operation of each line.In the simulations the central operator showed a greater reduction in the overall waiting time of the passengers of 55% compared to a no control scenario. It also provided a balanced load of the buses along the corridor, and a lower variability of the bus headways in the subset of stops where the lines coexist, thus obtaining better reliability for all types of passengers present in the public transport system.     

Passengers' perceptions and effects of bus‐holding strategy using automatic vehicle location technology

This study reports bus passengers' behavior and perceptions related to the use of potential features of an automatic vehicle location (AVL) system in bus transit through conducting an attitudinal on‐board survey in Bangkok. A passenger waiting‐time survey conducted as part of this study revealed that passengers perceive waiting‐time at bus stops to be greater than actually experienced. The other aim of this study is to examine the potential benefits of bus‐holding using an AVL technology, in terms of waiting‐time, through minimizing bus bunching under different congestion levels. The results are obtained using PARAMICS, and reveal a significant reduction in average waiting‐time.     

Waiting time perceptions at transit stops and stations: Effects of basic amenities,gender, and security

Waiting time in transit travel is often perceived negatively and high-amenity stops and stations are becoming increasingly popular as strategies for mitigating transit riders’ aversion to waiting. However, beyond recent evidence that realtime transit arrival information reduces perceived waiting time, there is limited empirical evidence as to which other specific station and stop amenities can effectively influence user perceptions of waiting time. To address this knowledge gap, the authors conducted a passenger survey and video-recorded waiting passengers at different types of transit stops and stations to investigate differences between survey-reported waiting time and video-recorded actual waiting time. Results from the survey and video observations show that the reported wait time on average is about 1.21 times longer than the observed wait time. Regression analysis was employed to explain the variation in riders’ reported waiting time as a function of their objectively observed waiting time, as well as station and stop amenities, weather, time of the day, personal demographics, and trip characteristics. Based on the regression results, most waits at stops with no amenities are perceived at least 1.3 times as long as they actually are. Basic amenities including benches and shelters significantly reduce perceived waiting times. Women waiting for more than 10 min in perceived insecure surroundings report waits as dramatically longer than they really are, and longer than do men in the same situation. The authors recommend a focus on providing basic amenities at stations and stops as broadly as possible in transit systems, and a particular focus on stops on low-frequency routes and in less safe areas for security measures.     

Crowding in public transport systems: Effects on users,operation and implications for the estimation of demand

The effects of high passenger density at bus stops, at rail stations, inside buses and trains are diverse. This paper examines the multiple dimensions of passenger crowding related to public transport demand, supply and operations, including effects on operating speed, waiting time, travel time reliability, passengers’ wellbeing, valuation of waiting and in-vehicle time savings, route and bus choice, and optimal levels of frequency, vehicle size and fare. Secondly, crowding externalities are estimated for rail and bus services in Sydney, in order to show the impact of crowding on the estimated value of in-vehicle time savings and demand prediction. Using Multinomial Logit (MNL) and Error Components (EC) models, we show that alternative assumptions concerning the threshold load factor that triggers a crowding externality effect do have an influence on the value of travel time (VTTS) for low occupancy levels (all passengers sitting); however, for high occupancy levels, alternative crowding models estimate similar VTTS. Importantly, if demand for a public transport service is estimated without explicit consideration of crowding as a source of disutility for passengers, demand will be overestimated if the service is designed to have a number of standees beyond a threshold, as analytically shown using a MNL choice model. More research is needed to explore if these findings hold with more complex choice models and in other contexts.     

A bi-level model for single-line rail timetable design with consideration of demand and capacity

This paper proposes a bi-level model to solve the timetable design problem for an urban rail line. The upper level model aims at determining the headways between trains to minimize total passenger cost, which includes not only the usual perceived travel time cost, but also penalties during travel. With the headways given by the upper level model, passengers’ arrival times at their origin stops are determined by the lower level model, in which the cost-minimizing behavior of each passenger is taken into account. To make the model more realistic, explicit capacity constraints of individual trains are considered. With these constraints, passengers cannot board a full train, but wait in queues for the next coming train. A two-stage genetic algorithm incorporating the method of successive averages is introduced to solve the bi-level model. Two hypothetical examples and a real world case are employed to evaluate the effectiveness of the proposed bi-level model and algorithm. Results show that the bi-level model performs well in reducing total passenger cost, especially in reducing waiting time cost and penalties. And the section loading-rates of trains in the optimized timetable are more balanced than the even-headway timetable. The sensitivity analyses show that passenger’s desired arrival time interval at destination and crowding penalty factor have a high influence on the optimal solution. And with the dispersing of passengers' desired arrival time intervals or the increase of crowding penalty factor, the section loading-rates of trains become more balanced.     

Evaluating the added-value of online bus arrival prediction schemes

Online predictions of bus arrival times have the potential to reduce the uncertainty associated with bus operations. By better anticipating future conditions, online predictions can reduce perceived and actual passenger travel times as well as facilitate more proactive decision making by service providers. Even though considerable research efforts were devoted to the development of computationally expensive bus arrival prediction schemes, real-world real-time information (RTI) systems are typically based on very simple prediction rules. This paper narrows down the gap between the state-of-the-art and the state-of-the-practice in generating RTI for public transport systems by evaluating the added-value of schemes that integrate instantaneous data and dwell time predictions. The evaluation considers static information and a commonly deployed scheme as a benchmark. The RTI generation algorithms were applied and analyzed for a trunk bus network in Stockholm, Sweden. The schemes are assessed and compared based on their accuracy, reliability, robustness and potential waiting time savings. The impact of RTI on passengers waiting times are compared with those attained by service frequency and regularity improvements. A method which incorporates information on downstream travel conditions outperforms the commonly deployed scheme, leading to a 25% reduction in the mean absolute error. Furthermore, the incorporation of instantaneous travel times improves the prediction accuracy and reliability, and contributes to more robust predictions. The potential waiting time gains associated with the prediction scheme are equivalent to the gains expected when introducing a 60% increase in service frequency, and are not attainable by service regularity improvements.