Inland waterways—their role and significance in European transport

Summary

1) Western Europe has a navigable waterways‐network of about 19,000 kms. For the coming decades, however, about 40 percent of the length of these waterways has a very limited relevance, because of the small capacity of the barges that can pass along them.

2) Of the different types of barges the majority are the self‐propelled type. The importance of the pull‐towed barges is declining quickly, whereas the push‐towed barges are on the upswing.

3) The relative importance of inland shipping in comparison with rail transport is far from uniform. In The Netherlands inland shipping is dominant. On the other hand, in France, this mode of transport has only 30 percent of the total number of tons transported by inland shipping and railways together.

4) May the relative importance defer, there is a strong resemblance between the types of goods that are transported via the waterways with crude and manufactured minerals as well as building materials ranking high. In general, inland shipping is primarily involved in the transport of basic products and is of vital importance to the functioning of the West‐European economy.

5) The rather complicated legal regime of the waterways in Western Europe is certainly not the only reason why the integration in the transportation sector of the European Communities hardly moves on.

A fundamental discussion about the basic conceptions of the transport policy in the Common Market is unavoidable before real progress can be made. The entrance of the United Kingdom into the European Community may give an opening on this point.

6) Life goes on, with or without transport‐integration. Inland shipping moves forward too, paying for the use of infrastructure or not.

The general trends in transport support the expectation that the relative importance of inland shipping will increase in the coming decades. The increase in size of shipments and transport distances works in favour of this mode of transport. Besides this, inland shipping still has many possibilities to improve its productivity.

7) The future of inland shipping will be found in bulk transport and the transport of general cargo that has a volume per destination that goes far beyond the quantities for which the container or comparable types of transport units are better suited.     

An environmental economic analysis of the new rail link to European main port Rotterdam

After a long policy debate it has been decided to built in the near future a new rail link (Betuwe line) in the Netherlands to handle the rapidly increasing volume of goods to be transported from Rotterdam harbour to the centre of Europe. This study analyses its economic and environmental aspects and compares rail transport with road transport and transport on inland waterways. It is shown that transport by water will compete strongly with transport on the new railway and that water transport is attractive economically and environmentally.     

Promoting Development through Multimodal Freight Transport in Bangladesh

Abstract

Development emanating from international trade and investment in many least‐developed economies is impeded by inland freight transport systems that restrict multimodal transport. Increasing international trade may raise gross domestic product, generating increased demand for internal containerized cargo movements, but the requisite transport infrastructure is lacking. The paper explores impediments to developing effective multimodal transport and possible solutions in Bangladesh, which is an extreme case in point. It reports applications of Delphi techniques that explored local expert opinions regarding policies required to tackle such impediments. A panel of corporate executives perceived a changing inland transport system poorly suited to efficient origin‐to‐destination cargo movements in international supply chains. To promote further development, customs procedures must be streamlined and Bangladeshi shippers must adopt a door‐to‐door transport system.     

Inland waterway transport in the federal Republic of Germany: Situation and problems

Inland waterway transport in the Federal Republic of Germany, interconnecting 54 out of the 80 big cities, is mainly structured into small-scale enterprises. Organisation of transport, however, is mainly accommodated by a few large shipping firms. The increasing interest in inland waterway transport is due to increasing infrastructural bottlenecks in rail and road transport caused by integration, whereas waterways still have high capacity reserves. Furthermore, they are environmentally beneficial. Future problems, on the one hand, will arise from fundamental market and relating changes inland waterway transport has to adapt to within the scope of transport chain optimisation. On the other hand, the abolishment of fare regulation and the commercialisation of the railway companies will change the internal and external competitive conditions. An additional problem arises from future competition of inland vessels from Eastern European countries.     

Transportation policy analysis with a geographic information system: The virtual network of freight transportation in Europe

This paper presents a multi-modal freight transportation model based on a digitized geographic network. A systematic analysis and decomposition of all the transport operations i.e. moving, loading and unloading, transshipping and transiting, leads to the development of a virtual network where each virtual link corresponds to a specific operation, and all transportation modes and means are inter-linked. Software, called NODUS, automatically generates the virtual network so that the model can be conveniently applied to large networks. The analytical structure of the links notation makes it easy to attach specific cost functions to each virtual link. The model is applied to the trans-European freight network of roads, railways and inland waterways for the transportation of wood. Cost functions are built up for each operation by each mode/means combination. A detailed point-to-point origin-destination matrix, calibrated on Eurostat statistics, is generated by a Monte-Carlo technique. Then, the total transportation cost is minimized with respect to the choices of routes, modes and means. This provides estimations of transportation services demands as well as modal splits, to the extent that the two hypotheses of demand based on generalized cost minimization and market contestability are accepted. A sensitivity analysis on the relative road cost is made, which provides measures of arc-elasticities.     

Routing and scheduling of RoRo ships with stowage constraints

Roll-on/Roll-off ships are used for international transport of vehicles and other rolling equipment. We consider the problem where a ship sails between two geographical regions, picking up cargo in the first and making deliveries to the second. Several variations are considered with optional cargoes, flexible cargo quantities, and ship stability restrictions. Decisions must be made regarding the route and schedule of the ship as well as the stowage of cargo onboard. The problem is modeled as a mixed integer program, which has been solved using Xpress. In addition, a tailor made heuristic procedure is built using components from tabu search and squeaky wheel optimization. Extensive computational results are presented, showing that the heuristic is able to handle realistically sized problem instances.     

Modal-split effects of climate change: The effect of low water levels on the competitive position of inland waterway transport in the river Rhine area

Future climate change is expected to affect inland waterway transport in most main natural waterways in Europe. For the river Rhine it is expected that, in summer, more and longer periods with low water levels will occur. In periods of low water levels inland waterway vessels have to reduce their load factors and, as a result, transport prices per tonne will increase. One possible consequence of these higher transport prices is a deterioration of the competitive position of inland waterway transport compared with rail and road transport, and thus a change in modal split. We study this issue using a GIS-based software model called NODUS which provides a tool for the detailed analysis of freight transportation over extensive multimodal networks. We assess the effect of low water levels on the costs of transport operations for inland waterway transport in North West Europe under several climate scenarios. It turns out, that the effect on the modal split is limited. Under the most extreme climate scenario, inland waterway transport would lose about 5.4% of the quantity that is currently being transported annually in the part of the European inland waterway transport market considered. The very dry year of 2003 can be seen as an analogue for this scenario.     

Traffic Noise in Europe: A Comparison of Calculation Methods,Noise Indices and Noise Standards for Road and Railroad Traffic in Europe

The demand for inland freight transport in Europe is mainly met by road transport, leading to unsustainable impacts such as air pollution, greenhouse gas emissions and congestion. Since rail transport has lower externalities than road transport, a modal shift from road to rail is an accepted policy goal for achieving a more sustainable and competitive transport system. However, intermodal road–rail transport is mainly competitive for long-distance transport, and as a consequence, the potential for modal shift is limited. The cost efficiency of road–rail intermodal transport is particularly sensitive to pre- and post-haulage (PPH) costs, since this activity typically has a larger cost compared with its share of the total distance in the transport chain. For intermodal transportation over shorter distances, for example, below 300 km and where there are substantial PPH activities at both ends of the chain, the competitiveness of the intermodal transport system compared with that of direct road is low. Improving the efficiency of PPH activities is, therefore, of utmost importance for the competitiveness of the intermodal transport system. This paper looks into the issue of improving the cost efficiency of an intermodal transport chain by implementing an innovative and flexible legal framework regarding the PPH activities in the chain. By extending the legal framework with exemptions for longer vehicles in PPH, the cost efficiency could be greatly improved. The purpose of such a framework is to allow and enable, for PPH exclusively, the use of 2?×?40 foot or even two semi-trailers using only one vehicle in the context of the Swedish regulatory framework. This paper develops a strategic calculation model for assessing and investigating the consequences of such a framework and investigates the framework's potential in terms of cost efficiency. The model in combination with a sensitivity analysis of input variables gives a comprehensive understanding of the effects of PPH under different circumstances. From the results, it is evident that there are substantial positive effects associated with a PPH framework of longer vehicles. Results indicate that a typical shipper may experience cost reductions of about 5–10% of the total costs of the intermodal transport chain. In summary, a more innovative and flexible legal framework regarding vehicle length in the PPH links can contribute to a greater modal shift, improved cost efficiency and more environmentally friendly transportation systems.     

Short Sea Shipping’s Green Label at Risk

Abstract

Shifting cargo from land‐based modes to maritime transport has been a prioritized policy in many policy papers to make transport more environmental friendly. Traditional calculations of emissions per transport capacity unit have supported this. However, maritime transport may stand to loose its good environmental reputation in comparison to road transport due to (1) the sluggish processes in maritime environmental policies and the low ambition level of current regulations, (2) the much higher focus on improving the environmental efficiency of the road haulage industry, (3) the much longer economic life of vessels compared to trucks, and (4) focus on faster vessels that increase the average fuel consumption of the sea transport alternative. Through a realistic case study, the energy efficiency and emissions of alternative multimodal transport chains is presented to illustrate these points.     

Large-scale road network vulnerability analysis: a sensitivity analysis based approach

Traditionally, an assessment of transport network vulnerability is a computationally intensive operation. This article proposes a sensitivity analysis-based approach to improve computational efficiency and allow for large-scale applications of road network vulnerability analysis. Various vulnerability measures can be used with the proposed method. For illustrative purposes, this article adopts the relative accessibility index (AI), which follows the Hansen integral index, as the network vulnerability measure for evaluating the socio-economic effects of link (or road segment) capacity degradation or closure. Critical links are ranked according to the differences in the AIs between normal and degraded networks. The proposed method only requires a single computation of the network equilibrium problem. The proposed technique significantly reduces computational burden and memory storage requirements compared with the traditional approach. The road networks of the Sioux Falls city and the Bangkok metropolitan area are used to demonstrate the applicability and efficiency of the proposed method. Network manager(s) or transport planner(s) can use this approach as a decision support tool for identifying critical links in road networks. By improving these critical links or constructing new bypass roads (or parallel paths) to increase capacity redundancy, the overall vulnerability of the networks can be reduced.     

Bottleneck congestion pricing and modal split: Redistribution of toll revenue

The paper examines the question of the redistribution of toll revenue as seen in a bottleneck congestion model. Our objective is to analyse the impact of this redistribution on total cost and on modal split between railroad and road. Following Tabuchi’s two-mode model (Tabuchi, T., 1993. Bottleneck congestion and modal split. Journal of Urban Economics 34, 414-431.), we integrate a redistribution of toll revenue towards public transport into our study. In this context, we investigate two kinds of road toll regimes: a fine toll and a uniform toll. We will consider two types of railroad fare: when it is set equal to the marginal cost and when it is set equal to average cost. These models allow us to show that toll policy to be more efficient as long as toll revenue is directed towards public transport when the railroad fare is equal to average cost.     

In Search of the Link between Ship Size and Operations

Abstract

Since 1990s the liner shipping industry has faced a period of restructuring and consolidation, and been confronted with a continuing increase in container vessel scale. The impact of these changes is noticeable in trade patterns, cargo handling methods and shipping routes, in short ‘operations’. After listing factors influencing size, growth in container ship size is explained by economies of scale in deploying larger vessels. In order to quantify economies of scale, this paper uses the liner service cash flow model. A novelty in the model is the inclusion of +6000-20-foot Equivalent Unit (TEU) vessels and the distinction in costs between single and twin propeller units on ships. The results illustrate that scale economies have been – and will continue to be – the driving force behind the deployment of larger container vessels. The paper then assesses the link between ship size and operations, given current discussions about the increase in container vessel scale. It is found that (a) ship size and operations are linked; (b) optimal ship size depends on transport segment (deep-sea vs. short-sea shipping, SSS), terminal type (transhipment terminals vs. other terminals), trade lane (East-West vs. North-South trades) and technology; and (c) a ship optimal for one trade can be suboptimal for another.     

The impact of alternative routeing and packaging scenarios on carbon and sulphate emissions in international wine distribution

There is a large body of research related to carbon footprint reduction in supply chains and logistics from a wide range of sectors; however the decarbonisation of freight transport is mostly explored from a single mode perspective and at a domestic/regional level. This paper takes into account a range of alternative transport modes, routes and methods with particular reference to UK wine imports from two regions: northern Italy and Southeast Australia. The research examines supply chain structures, costs and the environmental impact of international wine distribution to the UK. A number of options are evaluated to calculate the carbon footprint and sulphate emissions of alternative route, mode, method of carriage, and packaging combinations. The estimation of CO₂e emissions incorporates three main elements - cargo mass, distance and method of carriage; sulphate emissions are derived from actual ship routes, engine power and operational speeds. The bottling of wine either at source or close to destination is also taken into consideration. The key findings are: there are major differences between the environmental footprint of different routeing and packaging scenarios; the international shipping leg almost always has a much larger footprint than inland transport within the UK except in the hypothetical case of the rail shipments from Italy using flexitanks. With reference to sulphate, the lowest cost scenario among the sea maximizing options is also the sulphate minimising solution.     

Sustainability assessment of inland transportation in China: A triple bottom line-based network DEA approach

The transport sector accounts for nearly one third of the world’s total energy use, while inland transport alone is responsible for half of the global petroleum consumption. The expansion of motorization in newly industrialized economies necessitates setting realistic targets. To support decision-makers in better assessment of transport sustainability performance, we introduce a systematic triple bottom line-based approach to evaluate inland transport, considering social, economic, and environmental dimensions of sustainability. The proposed network data envelopment analysis (DEA) measure organizes the three components of the system into a parallel structure, allocates shared input across subsystems, and incorporates undesirable output. The empirical application determines the efficiency of regional inland transportation systems in China from 2006 to 2015. The results indicate a rise in overall transport efficiency between China’s 11th and 12th five-year development plan periods and link the economic growth with a decrease in environmental transport efficiency in the Central and Western zones and with a decline in social efficiency in the Eastern zone. Since 2012, the social sustainability remains the weakest component of inland transport, which requires special attention by policy-makers to support vulnerable groups of transport users. This study provides further insight into the investigated measures and proposes recommendations for the improvement of inland transport in China.     

国际道路货运发展与大湄公河次区域合作

本文分析了大湄公河次区域合作下广西国际道路货运发展现状,提出了广西国际货运发展指导思想和总体目标,探讨了国际道路货运的发展对策。     

On the distribution of urban road space for multimodal congested networks

Transport systems in real cities are complex with many modes of transport sharing and competing for limited road space. This work intends to understand how space distributions for modes and interactions among modes affect network traffic performance. While the connection between performance of transport systems and general land allocation is the subject of extensive research, space allocation for interacting modes of transport is an open research question. Quantifying the impact of road space distribution on the performance of a congested multimodal transport system with a dynamic aggregated model remains a challenge. In this paper, a multimodal macroscopic fundamental diagram (MFD) is developed to represent the traffic dynamics of a multimodal transport system. Optimization is performed with the objective of minimizing the total passenger hours traveled (PHT) to serve the total demand by redistributing road space among modes. Pricing strategies are also investigated to provide a higher demand shift to more efficient modes. We find by an application to a bi-modal two-region city that (i) the proposed model captures the operational characteristics of each mode, and (ii) optimal dynamic space distribution strategies can be developed. In practice, the approach can serve as a physical dynamic model to inform space distribution strategies for policy makers with different goals of mobility.     

A decision analysis framework for intermodal transport: Comparing fuel price increases and the internalisation of external costs

This paper presents the impact of fuel price increases on the market area of intermodal transport terminals. Aim of this research is to determine whether an increase in fuel prices is sufficient enough to raise the market area of intermodal transport to the same degree that would be accomplished by stimulating intermodal transport through policy instruments. Therefore, several fuel price scenarios are analysed in order to verify the impact of different fuel price evolutions on the market area of unimodal road transport compared to intermodal transport in Belgium. The LAMBIT-model (Location Analysis for Belgian Intermodal Terminals), which is a GIS-based model (Macharis and Pekin, 2008), is used to analyse the different fuel price increases and enables a visualisation of the impact on the market area. The LAMBIT model incorporates the different network layers for each transport mode by setting up a GIS network that includes four different layers: the road network, the rail network, the inland waterways network and the final haulage network. The geographic locations of the intermodal terminals and the port of Antwerp are added as nodes in the network and the Belgian municipality centres are defined and connected to the different network layers. Based on the different fuel price scenarios representing respectively a fuel price increase with 10% (low price case), 50% (business as usual case) and 90% (high price case), the results of the LAMBIT model show that the market areas rise in favour of intermodal barge/road and intermodal rail/road. Depending on the scenario, the degree of modal shift however differs. Additionally, in order to compare policy measures with the effect of a fuel price increase, the internalisation of the external costs is analysed with the LAMBIT model. For some years, the European Commission is supporting the idea that transportation costs should reflect the true impacts on environment and society, and is relentlessly pushing towards the so called ‘internalisation of external costs’ as a policy instrument in order to establish fair and efficient pricing of different transport modes. This requires monetarizing the external effects of transport and adding them to the already internalized costs in order to give the correct price signals. Results of this comparative analysis performed with the LAMBIT model are also presented in this paper.     

Sensitivity analysis on stochastic equilibrium transportation networks using genetic algorithm

This study deals with the sensitivity analysis of an equilibrium transportation networks using genetic algorithm approach and uses the bi‐level iterative sensitivity algorithm. Therefore, integrated Genetic Algorithm‐TRANSYT and Path Flow Estimator (GATPFE) is developed for signalized road networks for various level of perceived travel time in order to test the sensitivity of perceived travel time error in an urban stochastic road networks. Level of information provided to drivers correspondingly affects the signal timing parameters and hence the Stochastic User Equilibrium (SUE) link flows. When the information on road system is increased, the road users try to avoid conflicting links. Therefore, the stochastic equilibrium assignment concept tends to be user equilibrium. The GATPFE is used to solve the bi‐level problem, where the Area Traffic Control (ATC) is the upper‐level and the SUE assignment is the lower‐level. The GATPFE is tested for six‐junction network taken from literature. The results show that the integrated GATPFE can be applied to carry out sensitivity analysis at the equilibrium network design problems for various level of information and it simultaneously optimize the signal timings (i.e. network common cycle time, signal stage and offsets between junctions).     

Cluster analysis of the competitiveness of container ports in Brazil

The container cargo proportion of total maritime transport increased from 3% in 1980 to 16% in 2011. The largest Brazilian port, the port of Santos, is the 42nd largest container port in the world. However, Santos’ performance indicators are much lower than those of the world’s largest ports, so comparisons with them are difficult. This article focuses on the Brazilian container terminals that handled containers in 2009 and compares port competitiveness. This study classified seventeen Brazilian container terminals into three distinct groups based on the following competitiveness criteria: number of containers handled, berth length, number of berths, terminal tariffs (in US$), berth depth, rate of medium consignment (in containers/ship), medium board (containers/hour), average waiting time for mooring (in hours/ship), and average waiting time for load or unload cargo (in hours/ship). This classification used a hierarchical cluster analysis. The classification shows that the terminal of Tecon in the port of Santos has the best performance of all, while small terminals (<150,000 container units) are the worst performing terminals in Brazil.     

The influence of transport on industrial location choice: a stated preference experiment

Stated preference experiments are introduced and applied to an investigation of the influence of road transport and other factors on industrial location in terms of the ex ante decision making process. The experiments, based upon repeated hypothetical discrete choices between pairs of locations, involved respondents from firms making trade-offs between the various characteristics in a fractional factorial, orthogonal survey design. In each defined case, a clear hierarchy of location factors emerged. These were found to vary according to the origin of the firm – classified as local relocations, foreign inward investors, and branch plants sourced from national bases. The importance of road links to location choice varied considerably between these groups with the latter rating motorway links the highest of any of the groups of firms. In contrast, overseas sourced branch firms found road links largely unimportant, being outweighed primarily by considerations of workforce and premises. Local relocations fell into two distinct groups with respect to the importance attached to road links (between relatively important and non-important), whilst considering the other factors similarly. Good public transport provision emerged as a statistically significant factor only in certain scenarios. Finally, the paper discusses implications for location choice models in transport and further research.