Imperfect reversibility of air transport demand: Effects of air fare,fuel prices and price transmission

There are recent evidence that air transport demand may not have a perfectly reversible relationship with income and jet fuel prices, as is assumed in most demand models. However, it is not known if the imperfectly reversible effects of jet fuel price are a result of asymmetries in the supply side, i.e., asymmetries in cost pass through from fuel prices to air fare, or of demand side behavioral asymmetries whereby people value gains and losses differently. This paper uses US time series data and decomposes air fare and fuel price into three component series to develop an econometric model of air transport demand that is capable of capturing the potential imperfectly reversible relationships and test for the presence or absence of reversibility. We find that air transport demand shows asymmetry with respect to air fare, indicating potential imperfect reversibility in consumer behavior. We also find evidence of asymmetry and hysteresis in cost pass-through from jet fuel prices to air fare, showing rapid increases in airfare when fuel prices increases but a slower response in the opposite direction.     

Flight delays,capacity investment and social welfare under air transport supply-demand equilibrium

This paper analyzes benefits from aviation infrastructure investment under competitive supply-demand equilibrium. The analysis recognizes that, in the air transportation system where economies of density is an inherent characteristic, capacity change would trigger a complicated set of adjustment of and interplay among passenger demand, air fare, flight frequency, aircraft size, and flight delays, leading to an equilibrium shift. An analytical model that incorporates these elements is developed. The results from comparative static analysis show that capacity constraint suppresses demand, reduces flight frequency, and increases passenger generalized cost. Our numerical analysis further reveals that, by switching to larger aircraft size, airlines manage to offset part of the delay effect on unit operating cost, and charge passengers lower fare. With higher capacity, airlines tend to raise both fare and frequency while decreasing aircraft size. More demand emerges in the market, with reduced generalized cost for each traveler. The marginal benefit brought by capacity expansion diminishes as the capacity-demand imbalance becomes less severe. Existing passengers in the market receive most of the benefit, followed by airlines. The welfare gains from induced demand are much smaller. The equilibrium approach yields more plausible investment benefit estimates than does the conventional method. In particular, when forecasting future demand the equilibrium approach is capable of preventing the occurrence of excessive high delays.     

Modeling the effects of traveler information on freeway origin–destination demand prediction

The primary focus of this research is to develop an approach to capture the effect of travel time information on travelers’ route switching behavior in real-time, based on on-line traffic surveillance data. It also presents a freeway Origin–Destination demand prediction algorithm using an adaptive Kalman Filtering technique, where the effect of travel time information on users’ route diversion behavior has been explicitly modeled using a dynamic, aggregate, route diversion model. The inherent dynamic nature of the traffic flow characteristics is captured using a Kalman Filter modeling framework. Changes in drivers’ perceptions, as well as other randomness in the route diversion behavior, have been modeled using an adaptive, aggregate, dynamic linear model where the model parameters are updated on-line using a Bayesian updating approach. The impact of route diversion on freeway Origin–Destination demands has been integrated in the estimation framework. The proposed methodology is evaluated using data obtained from a microscopic traffic simulator, INTEGRATION. Experimental results on a freeway corridor in northwest Indiana establish that significant improvement in Origin–Destination demand prediction can be achieved by explicitly accounting for route diversion behavior.     

On the use of “average delay” as a measure of train reliability

We investigate how passengers on long-distance trains value unexpected delays relative to scheduled travel time and travel cost. For scheduled services with high reliability and long headways, the value of delays is most commonly assumed to be proportional to the average delay. By exploring how the valuation of train delays depends on delay risk and delay length, using three different stated choice data sets, we find that the “average delay” approach does not hold: the disutility increases slower than linearly in the delay risk. This means that using the average delay as a performance indicator, a guide for operations planning or for investment appraisal will underestimate the value of small risks of long delays relative to large risks for short delays. It also means that estimated valuations of “average delay” will depend on the delay risk level: valuations will be higher the lower the risk levels in the study are.     

Ramp meters on trial: Evidence from the Twin Cities metering holiday

Ramp meters in the Twin Cities have been the subject of a recent test of their effectiveness, involving turning them off for eight weeks. This paper analyzes the results with and without ramp metering for several representative freeways during the afternoon peak period. Seven performance measures: mobility, equity, productivity, consumers’ surplus, accessibility, travel time variation and travel demand responses are compared. It is found that ramp meters are particularly helpful for long trips relative to short trips. Ramp metering, while generally beneficial to freeway segments, may not improve trip travel times (including ramp delays). The reduction in travel time variation comprises another benefit from ramp meters. Non-work trips and work trips respond differently to ramp meters. The results are mixed, suggesting a more refined ramp control algorithm, which explicitly considers ramp delay, is in order.     

Neighborhood services,trip purpose,and tour-based travel

Communities are increasingly looking to land use planning strategies to reduce drive-alone travel. Many planning efforts aim to develop neighborhoods with higher levels of accessibility that will allow residents to shop closer to home and drive fewer miles. To better understand how accessible land use patterns relate to household travel behavior, this paper is divided into three sections. The first section describes the typical range of services available in areas with high neighborhood accessibility. It explains how trip-based travel analysis is limited because it does not consider the linked (chained) nature of most travel. The second section describes a framework that provides a more behavioral understanding of household travel. This framework highlights travel tours, the sequence of trips that begin and end at home, as the basic unit of analysis. The paper offers a typology of travel tours to account for different travel purposes; by doing so, this typology helps understand tours relative to the range of services typically offered in accessible neighborhoods. The final section empirically analyzes relationships between tour type and neighborhood access using detailed travel data from the Central Puget Sound region (Seattle, Washington). Households living in areas with higher levels of neighborhood access are found to complete more tours and make fewer stops per tour. They make more simple tours (out and back) for work and maintenance (personal, appointment, and shopping) trip purposes but there is no difference in the frequency of other types of tours. While they travel shorter distances for maintenance-type errands, a large portion of their maintenance travel is still pursued outside the neighborhood. These findings suggest that while higher levels of neighborhood access influences travel tours, it does not spur households to complete the bulk of their errands close to home.     

Virtual mobility and organizational reality – a note on the mobility needs in knowledge organisations

This article addresses the potential for reducing international work-related air travelling through the use of information and communication technologies such as videoconferences and e-learning in knowledge companies. It looks at the potential for reducing travel related to such things as meetings and teaching. In the absence of regulations, however, we do not find potential for reducing the number of trips of this type because they do not facilitate face-to-face contacts. Therefore the conclusion is, that policy and planning have to look for other options for pursuing ‘sustainable mobility’ policies in the future.     

Characterization and prediction of air traffic delays

This paper presents a new class of models for predicting air traffic delays. The proposed models consider both temporal and spatial (that is, network) delay states as explanatory variables, and use Random Forest algorithms to predict departure delays 2–24 h in the future. In addition to local delay variables that describe the arrival or departure delay states of the most influential airports and links (origin–destination pairs) in the network, new network delay variables that characterize the global delay state of the entire National Airspace System at the time of prediction are proposed. The paper analyzes the performance of the proposed prediction models in both classifying delays as above or below a certain threshold, as well as predicting delay values. The models are trained and validated on operational data from 2007 and 2008, and are evaluated using the 100 most-delayed links in the system. The results show that for a 2-h forecast horizon, the average test error over these 100 links is 19% when classifying delays as above or below 60 min. Similarly, the average over these 100 links of the median test error is found to be 21 min when predicting departure delays for a 2-h forecast horizon. The effects of changes in the classification threshold and forecast horizon on prediction performance are studied.     

Airline-driven ground delay programs: A benefits assessment

Three decades of research studies in ground delay program (GDP) decision-making, and air traffic flow management in general, have produced several analytical models and decision support tools to design GDPs with minimum delay costs. Most of these models are centralized, i.e., the central authority almost completely decides the GDP design by optimizing certain centralized objectives. In this paper, we assess the benefits of an airline-driven decentralized approach for designing GDPs. The motivation for an airline-driven approach is the ability to incorporate the inherent differences between airlines when prioritizing, and responding to, different GDP designs. Such differences arise from the airlines’ diverse business objectives and operational characteristics. We develop an integrated platform for simulating flight operations during GDPs, an airline recovery module for mimicking the recovery actions of each individual airline under a GDP, and an algorithm for fast solution of the recovery problems to optimality. While some of the individual analytical components of our framework, model and algorithm share certain similarities with those used by previous researchers, to the best of our knowledge, this paper presents the first comprehensive platform for simulating and optimizing airline operations under a GDP and is the most important technological contribution of this paper. Using this framework, we conduct detailed computational experiments based on actual schedule data at three of the busiest airports in the United States. We choose the recently developed Majority Judgment voting and grading method as our airline-driven decentralized approach for GDP design because of the superior theoretical and practical benefits afforded by this approach as shown by multiple recent studies. The results of our evaluation suggest that adopting this airline-driven approach in designing the GDPs consistently and significantly reduces airport-wide delay costs compared to the state-of-the-research centralized approaches. Moreover, the cost reduction benefits of the resultant airline-driven GDP designs are equitably distributed across different airlines.     

Modelling operational, economic and environmental performance of an air transport network

The paper models the operational, economic and environmental performance of an air transport network consisting of airports and air routes connecting them. The operational capacity represents the operational performance. Thresholds on the network’s environmental burdens reflect the environmental performance. The economic performance comprises the network’s profits. Modelling the network performance includes using integer programming techniques to maximise total network profits for given operational capacity and environmental constraints under conditions where environmental externalities are internalised.     

What do commuters think travel time reliability is worth? Calculating economic value of reducing the frequency and extent of unexpected delays

The measurement of transportation system reliability has become one of the central topics of travel demand studies. A growing literature concerns the measurement of value of travel time reliability which provides a monetary cost of avoiding unpredictable travel time. The goal of this study is to measure commuters’ sensitivities to travel time reliability and their willingness to pay (WTP) to avoid unreliable routes. The preferences are elicited through a pivoted stated preference survey technique. To circumvent the issue of presenting numerical distributions and statistical terms to day-to-day commuters, we use the frequency of delay days as a means of measuring traveler’s sensitivities to travel time reliability. The advantage of using simplified measures to elicit traveler preferences for travel time reliability is that these methods simply compare days with high delay to days with usual travel time. It was found that travelers are not only averse to the amount of unexpected delay but also to the frequency of days with unexpected delays. The paper presents WTP findings for three measures: travel time, frequency embedded travel time, and travel time reliability. The ‘reliability’ increase in WTP for travel time is found to be nearly proportional to the frequency of experiencing unexpected delays. For example, the WTP for mean travel time is calculated at $6.98/h; however, reliability adds $3.27 (about 50 % of $6.98) to avoid unexpected delays ‘5 out of 10 days’. The results of the study would provide valuable inputs to cost-benefit analyses and traffic and revenue studies required for road tolling investment projects.     

Understanding suburban travel demand: Flexible modelling with revealed and stated choice data

We analyse the choice of mode in suburban corridors using nested logit specifications with revealed and stated preference data. The latter were obtained from a choice experiment between car and bus, which allowed for interactions among the main policy variables: travel cost, travel time and frequency. The experiment also included parking cost and comfort attributes. The attribute levels in the experiment were adapted to travellers’ experience using their revealed preference information. Different model specifications were tested accounting for the presence of income effect, systematic taste variation, and incorporating the effect of latent variables. We also derived willingness-to-pay measures, such as the subjective value of time, that vary among individuals as well as elasticity values. Finally, we analysed the demand response to various policy scenarios that favour public transport use by considering improvements in level-of-service, fare reductions and/or increases in parking costs. In general, demand was shown to be more sensitive to policies that penalise the private car than those improving public transport.     

Driver response to variable message signs: a stated preference investigation

This paper uses a Stated Preference approach to undertake a detailed assessment of the effect on drivers’ route choice of information provided by variable message signs (VMS). Although drivers’ response to VMS information will vary according to the availability of alternative routes and the extent to which they are close substitutes, our findings show that route choice can be strongly influenced by the provision of information about traffic conditions ahead. This has important implications for the use of VMS systems as part of comprehensive traffic management and control systems. The principal findings are that the impact of VMS information depends on: the content of the message, such as the cause of delay and its extent; local circumstances, such as relative journey times in normal conditions; and drivers’ characteristics, such as their age, sex and previous network knowledge. The impact of qualitative indicators, visible queues and delays were examined. It was found that not only is delay time more highly valued than normal travel time, which is to be expected, but that drivers become more sensitive to delay time as delay times increased across the range presented.     

Arterial traffic signal optimization: A person-based approach

This paper presents a real-time signal control system that optimizes signal settings based on minimization of person delay on arterials. The system’s underlying mixed integer linear program minimizes person delay by explicitly accounting for the passenger occupancy of autos and transit vehicles. This way it can provide signal priority to transit vehicles in an efficient way even when they travel in conflicting directions. Furthermore, it recognizes the importance of schedule adherence for reliable transit operations and accounts for it by assigning an additional weighting factor on transit delays. This introduces another criterion for resolving the issue of assigning priority to conflicting transit routes. At the same time, the system maintains auto vehicle progression by introducing the appropriate delays associated with interruptions of platoons. In addition to the fact that it utilizes readily available technologies to obtain the inputs for the optimization, the system’s feasibility in real-world settings is enhanced by its low computation time. The proposed signal control system is tested on a four-intersection segment of San Pablo Avenue arterial located in Berkeley, California. The findings show the system’s capability to outperform pretimed (i.e., fixed-time) optimal signal settings by reducing total person delay. They have also demonstrated its success in reducing bus person delay by efficiently providing priority to transit vehicles even when they travel in conflicting directions.     

The sequenced activity mobility simulator (SAMS): an integrated approach to modeling transportation, land use and air quality

The persistence of environmental problems in urban areas and the prospect of increasing congestion have precipitated a variety of new policies in the USA, with concomitant analytical and modeling requirements for transportation planning. This paper introduces the Sequenced Activity-Mobility Simulator (SAMS), a dynamic and integrated microsimulation forecasting system for transportation, land use and air quality, designed to overcome the deficiencies of conventional four-step travel demand forecasting systems. The proposed SAMS framework represents a departure from many of the conventional paradigms in travel demand forecasting. In particular, it aims at replicating the adaptative dynamics underlying transportation phenomena; explicitly incorporates the time-of-day dimension; represents human behavior based on the satisficing, as opposed to optimizing, principle; and endogenously forecasts socio-demographic, land use, vehicle fleet mix, and other variables that have traditionally been projected externally to be input into the forecasting process.     

Integrated modeling of high performance passenger and freight train planning on shared-use corridors in the US

This paper studies strategic level train planning for high performance passenger and freight train operations on shared-use corridors in the US. We develop a hypergraph-based, two-level approach to sequentially minimize passenger and freight costs while scheduling train services. Passenger schedule delay and freight lost demand are explicitly modeled. We explore different solution strategies and conclude that a problem-tailored linearized reformulation yields superior computational performance. Using realistic parameter values, our numerical experiments show that passenger cost due to schedule delay is comparable to in-vehicle travel time cost and rail fare. In most cases, marginal freight cost increase from scheduling more passenger trains is higher than marginal reduction in passenger schedule delay cost. The heterogeneity of train speed reduces the number of freight trains that can run on a corridor. Greater tolerance for delays could reduce lost demand and overall cost on the freight side. The approach developed in the paper could be applied to other scenarios with different parameter values.     

A practical approach to identifying the market potential for high speed rail: A case study in the Sydney-Canberra corridor

This paper presents the methodology and selective empirical results from a study of the demand for a high speed rail system serving the Sydney-Canberra corridor currently dominated by air travel for business trips and car travel for non-business trips. We outline the steps involved in the study from problem specification, data needs, development of base year trip tables, model specification and estimation to establish switching behaviour in the presence of a new mode and calculation of induced demand for current travellers. A stated choice heteroskedastic extreme value switching model is used to evaluate the choice of fare type for business and non-business travel given the current mode used in the corridor for each sampled traveller conventional train, charter coach, scheduled coach, plane or car. Starting with the current travel profile, patronage can be predicted under alternative fare regimes, taking into account diverted traffic, induced traffic and growth. Treating fare class as endogenous enhances the real choice context facing potential patrons.     

Instrumented city database analysts using multi-agents

The Instrumented City (iC) database is a multi-purpose, transport-related database facility for use by the entire academic transport research community. Data from the UK Leicester City Council and Nottinghamshire County Council Traffic Management Computers is logged and archived on a continuous basis, by the Leeds University’s Institute for Transport Studies. Since its inception in 1992, the iC database has been used for various real-time applications such as air quality and noise monitoring, modelling and forecasting. This paper describes the framework that demonstrates the feasibility of using multi-agents as information analysts to process and manage the iC database. The agents are adaptive, interactive and personal. They can be trained via the interactions with the users to be personalised for individual preferences. These agents are designed to be responsible for (1) data clean-up to remove outliers; (2) missing data substitutions; (3) statistical data analysis; (4) data mining to enhance the understanding of the relationships between traffic and air quality, noise and health; and (5) knowledge discovery by identifying unknown but potentially important patterns.     

Real time queue length estimation for signalized intersections using travel times from mobile sensors

We study how to estimate real time queue lengths at signalized intersections using intersection travel times collected from mobile traffic sensors. The estimation is based on the observation that critical pattern changes of intersection travel times or delays, such as the discontinuities (i.e., sudden and dramatic increases in travel times) and non-smoothness (i.e., changes of slopes of travel times), indicate signal timing or queue length changes. By detecting these critical points in intersection travel times or delays, the real time queue length can be re-constructed. We first introduce the concept of Queue Rear No-delay Arrival Time which is related to the non-smoothness of queuing delay patterns and queue length changes. We then show how measured intersection travel times from mobile sensors can be processed to generate sample vehicle queuing delays. Under the uniform arrival assumption, the queuing delays reduce linearly within a cycle. The delay pattern can be estimated by a linear fitting method using sample queuing delays. Queue Rear No-delay Arrival Time can then be obtained from the delay pattern, and be used to estimate the maximum and minimum queue lengths of a cycle, based on which the real-time queue length curve can also be constructed. The model and algorithm are tested in a field experiment and in simulation.     

A new generalized travel cost based connectivity metric applied to Scandinavian airports

This article proposes a new, generalized travel cost based method to operationalize network accessibility provided by airports. The approach is novel as it integrates features of network topology with multiple quality aspects of scheduled air transport services into one metric. The method estimates generalized travel costs for the full set of feasible travel paths between an airport and all network destinations. Rooftop modeling accounts for schedule delay and isolates the most cost-efficient travel paths per O-D relation. Respecting the assumed arrival time preference of passengers and adjusting for destination importance, connectivity scores are derived. The method is then applied to explore changes in the global connectivity pattern of Scandinavian airports from 2004 to 2018. The results suggest distinct spatial differences throughout the network, but less pronounced in size than suggested by popularly applied connectivity measures. Findings also highlight the importance of the geographical location as a determinate of an airport’s connectivity.