A case study on the coordination of last trains for the Beijing subway network

Passengers may make several transfers between different lines to reach their destinations in urban railway transit networks. Coordination of last trains in feeding lines and connecting lines at transfer stations is especially important because it is the last chance for many travellers to transfer. In this paper, a mathematical method is used to reveal the relationships between passenger transfer connection time (PTCT) and passenger transfer waiting time (PTWT). A last-train network transfer model (LNTM) is established to maximize passenger transfer connection headways (PTCH), which reflect last-train connections and transfer waiting time. Additionally, a genetic algorithm (GA) is developed based upon this LNTM model and used to test a numerical example to verify its effectiveness. Finally, the Beijing subway network is taken as a case study. The results of the numerical example show that the model improves five connections and reduces to zero the number of cases when a feeder train arrives within one headway’s time after the connecting train departed.     

Dispatching control at transfer stations in multi‐hub transit networks

Among dispatching control approaches, the holding option has attracted the most attention in bus control. However, holding a vehicle at a transfer station may exacerbate the delays because more passengers might accumulate at downstream stations and may also affect other connecting routes at other transfer stations. Our problem is to minimize the total costs of dispatching ready vehicles at each transfer station along coordinated routes in a multi‐hub transit network. The total costs include the waiting cost for on‐board passengers, the missed connection costs for late arrival passengers at the subject transfer station and possible transfer costs at downstream transfer stations. We develop a heuristic algorithm to optimize the holding times based on real time information about late vehicles. The results show that ready vehicles should be held longer when the arrival variances of late vehicles are small or when many late connecting passengers are expected.     

A two-stage stochastic optimization model for the transfer activity choice in metro networks

This research focuses on finding the best transfer schemes in metro networks. Using sample-based time-invariant link travel times to capture the uncertainty of a realistic network, a two-stage stochastic integer programming model with the minimized expected travel time and penalty value incurred by transfer activities is formulated. The first stage aims to find a sequence of potential transfer nodes (stations) that can compose a feasible path from origins to destinations in the transfer activity network, and the second stage provides the least time paths passing by the generated transfer stations in the first stage for evaluating the given transfer schemes and then outputs the best routing information. To solve our proposed model, an efficient hybrid algorithm, in which the label correcting algorithm is embedded into a branch and bound searching framework, is presented to find the optimal solutions of the considered problem. Finally, the numerical experiments are implemented in different scales of metro networks. The computational results demonstrate the effectiveness and performance of the proposed approaches even for the large-scale Beijing metro network.     

Multi-objective re-synchronizing of bus timetable: Model,complexity and solution

This work is originally motived by the re-planning of a bus network timetable. The existing timetable with even headways for the network is generated using line by line timetabling approach without considering the interactions between lines. Decision-makers (i.e., schedulers) intend to synchronize vehicle timetable of lines at transfer nodes to facilitate passenger transfers while being concerned with the impacts of re-designed timetable on the regularity of existing timetable and the accustomed trip plans of passengers. Regarding this situation, we investigate a multi-objective re-synchronizing of bus timetable (MSBT) problem, which is characterized by headway-sensitive passenger demand, uneven headways, service regularity, flexible synchronization and involvement of existing bus timetable. A multi-objective optimization model for the MSBT is proposed to make a trade-off between the total number of passengers benefited by smooth transfers and the maximal deviation from the departure times of the existing timetable. By clarifying the mathematical properties and solution space of the model, we prove that the MSBT problem is NP-hard, and its Pareto-optimal front is non-convex. Therefore, we design a non-dominated sorting genetic (NSGA-II) based algorithm to solve this problem. Numerical experiments show that the designed algorithm, compared with enumeration method, can generate high-quality Pareto solutions within reasonable times. We also find that the timetable allowing larger flexibility of headways can obtain more and better Pareto-optimal solutions, which can provide decision-makers more choice.     

Optimal transit routing with partial online information

This paper studies the routing strategy in a transit network with partial online information at stops. By partial online information, we mean that the arrival time of the incoming transit vehicles is available for a subset of the lines serving a stop. To cope with the partial information assumption, a new routing strategy is proposed and closed form formulae for computing expected waiting times and line boarding probabilities are derived. The proposed strategy unifies existing hyperpath-based transit route choice models that assume either no information or full information. Like many existing models, it ensures optimality when all information is available or the headway is exponentially distributed. The problem of determining the attractive set is discussed for each of the three information cases. In particular, a new heuristic algorithm is developed to generate the attractive set in the partial information case, which will always yield a solution no worse than that obtained without any information. The paper also reveals that, when information is available, an optimal hyperpath may contain cycles. Accordingly, the cause of such cycles is analyzed, and a sufficient condition that excludes cycles from optimal hyperpaths is proposed. Finally, numerical experiments are conducted to illustrate the impact of information availability on expected travel times and transit line load distributions. Among other findings, the results suggest that it is more useful to have information on faster lines than on slower lines.     

Stochastic transit equilibrium

We present a transit equilibrium model in which boarding decisions are stochastic. The model incorporates congestion, reflected in higher waiting times at bus stops and increasing in-vehicle travel time. The stochastic behavior of passengers is introduced through a probability for passengers to choose boarding a specific bus of a certain service. The modeling approach generates a stochastic common-lines problem, in which every line has a chance to be chosen by each passenger. The formulation is a generalization of deterministic transit assignment models where passengers are assumed to travel according to shortest hyperpaths. We prove existence of equilibrium in the simplified case of parallel lines (stochastic common-lines problem) and provide a formulation for a more general network problem (stochastic transit equilibrium). The resulting waiting time and network load expressions are validated through simulation. An algorithm to solve the general stochastic transit equilibrium is proposed and applied to a sample network; the algorithm works well and generates consistent results when considering the stochastic nature of the decisions, which motivates the implementation of the methodology on a real-size network case as the next step of this research.     

A subway planning bi-objective multi-period optimization model integrating timetabling and vehicle scheduling: a case study of Tehran

Due to the interaction among different planning levels and various travel demands during a day, the transit network planning is of great importance. In this paper, a bi-objective multi-period planning model is proposed for the synchronization of timetabling and vehicle scheduling. The main aim of the problem is to minimize the weighted transfer waiting time in the interchange stations along with the operational costs of vehicles. In order to demonstrate the effectiveness of the proposed integrated model, a real case study of Tehran subway is considered. The proposed model is solved by the ε-constraint method and some outstanding results are achieved.

     

Passenger-demands-oriented train scheduling for an urban rail transit network

This paper considers the train scheduling problem for an urban rail transit network. We propose an event-driven model that involves three types of events, i.e., departure events, arrival events, and passenger arrival rates change events. The routing of the arriving passengers at transfer stations is also included in the train scheduling model. Moreover, the passenger transfer behavior (i.e., walking times and transfer times of passengers) is also taken into account in the model formulation. The resulting optimization problem is a real-valued nonlinear nonconvex problem. Nonlinear programming approaches (e.g., sequential quadratic programming) and evolutionary algorithms (e.g., genetic algorithms) can be used to solve this train scheduling problem. The effectiveness of the event-driven model is evaluated through a case study.     

Optimal coordination of public-transit vehicles using operational tactics examined by simulation

This work focuses on improving transit-service reliability by optimally reducing the transfer time required in the operations of transit networks. Service reliability of public-transit operations is receiving increased attention as agencies are faced with immediate problems of proving credible service while attempting to reduce operating cost. Unreliable service has also been cited as the major deterrent to existing and potential passengers. Due to the fact that most of the public transit attributes are stochastic: travel time, dwell time, demand, etc., the passenger is likely to experience unplanned waiting times and ride times. One of the main components of service reliability is the use of transfers. Transfers have the advantages of reducing operational costs and introducing more flexible and efficient route planning. However its main drawback is the inconvenience of traveling multi-legged trips. This work introduces synchronized (timed) time-tables to diminish the waiting time caused by transfers. Their use, however, suffers from uncertainty about the simultaneous arrival of two (or more) vehicles at an existing stop. In order to alleviate the uncertainty of simultaneous arrivals, operational tactics such as hold, skip stop and short-turn can be deployed considering the positive and negative effects, of each tactic, on the total travel time. A dynamic programming model was developed for minimizing the total travel time resulting with a set of preferred tactics to be deployed. This work describes the optimization model using simulation for validation of the results attained. The results confirm the benefits of the model with 10% reduction of total travel time and more than 200% increase of direct transfers (transfers in which both vehicles arrive simultaneously to the transfer point).     

Optimizing charging station locations for urban taxi providers

Recently, electric vehicles are gaining importance which helps to reduce dependency on oil, increases energy efficiency of transportation, reduces carbon emissions and noise, and avoids tail pipe emissions. Because of short daily driving distances, high mileage, and intermediate waiting time, fossil-fuelled taxi vehicles are ideal candidates for being replaced by battery electric vehicles (BEVs). Moreover, taxi BEVs would increase visibility of electric mobility and therefore encourage others to purchase an electric vehicle. Prior to replacing conventional taxis with BEVs, a suitable charging infrastructure has to be established. This infrastructure consists of a sufficiently dense network of charging stations taking into account the lower driving ranges of BEVs.In this case study we propose a decision support system for placing charging stations in order to satisfy the charging demand of electric taxi vehicles. Operational taxi data from about 800 vehicles is used to identify and estimate the charging demand for electric taxis based on frequent origins and destinations of trips. Next, a variant of the maximal covering location problem is formulated and solved to satisfy as much charging demand as possible with a limited number of charging stations. Already existing fast charging locations are considered in the optimization problem. In this work, we focus on finding regions in which charging stations should be placed rather than exact locations. The exact location within an area is identified in a post-optimization phase (e.g., by authorities), where environmental conditions are considered, e.g., the capacity of the power network, availability of space, and legal issues.Our approach is implemented in the city of Vienna, Austria, in the course of an applied research project that has been conducted in 2014. Local authorities, power network operators, representatives of taxi driver guilds as well as a radio taxi provider participated in the project and identified exact locations for charging stations based on our decision support system.     

Equity-based timetable synchronization optimization in urban subway network

In the urban subway transportation system, passengers may have to make at least one transfer traveling from their origin to destination. This paper proposes a timetable synchronization optimization model to optimize passengers’ waiting time while limiting the waiting time equitably over all transfer station in an urban subway network. The model aims to improve the worst transfer by adjusting the departure time, running time, the dwelling time and the headways for all directions in the subway network. In order to facilitate solution, we develop a binary variables substitute method to deal with the binary variables. Genetic algorithm is applied to solve the problem for its practicality and generality. Finally, the suggested model is applied to Beijing urban subway network and several performance indicators are presented to verify the efficiency of suggested model. Results indicate that proposed timetable synchronization optimization model can be used to improve the network performance for transfer passengers significantly.     

User perspectives in public transport timetable optimisation

The present paper deals with timetable optimisation from the perspective of minimising the waiting time experienced by passengers when transferring either to or from a bus. Due to its inherent complexity, this bi-level minimisation problem is extremely difficult to solve mathematically, since timetable optimisation is a non-linear non-convex mixed integer problem, with passenger flows defined by the route choice model, whereas the route choice model is a non-linear non-continuous mapping of the timetable. Therefore, a heuristic solution approach is developed in this paper, based on the idea of varying and optimising the offset of the bus lines. Varying the offset for a bus line impacts the waiting time passengers experience at any transfer stop on the bus line.In the bi-level timetable optimisation problem, the lower level is a transit assignment calculation yielding passengers’ route choice. This is used as weight when minimising waiting time by applying a Tabu Search algorithm to adapt the offset values for bus lines. The updated timetable then serves as input in the following transit assignment calculation. The process continues until convergence.The heuristic solution approach was applied on the large-scale public transport network in Denmark. The timetable optimisation approach yielded a yearly reduction in weighted waiting time equivalent to approximately 45 million Danish kroner (9 million USD).     

A new shared vehicle system for urban areas

The paper concerns the conceptual design of a transport system for pedestrian areas. The proposed transport system is based on a fleet of eco-sustainable Personal Intelligent City Accessible Vehicles (PICAVs). The vehicles are shared through the day by different users and the following specific services will be provided: instant access, open ended reservation and one way trips. Referring to the proposed transport system, a new methodology to optimise the fleet dimension and its distribution among the stations is proposed in this paper. The problem faced is an optimisation problem where the cost function to be minimised takes into account both the transport system cost and the user costs that depend on the waiting times. A random search algorithm has been adopted. Given a fleet dimension and its distribution among the stations, the waiting times of the users are assessed by a microscopic simulation. The simulation model tracks the second-by-second activity of each PICAV user, as well as the second-by-second activity of each vehicle. The overall methodology has been implemented in an object-oriented simulator. The proposed transport system has been planned and simulated for the historical city centre of Genoa, Italy.     

Distributed algorithm for empty vehicles management in personal rapid transit (PRT) network

In this paper, an original heuristic algorithm of empty vehicles management in personal rapid transit network is presented. The algorithm is used for the delivery of empty vehicles for waiting passengers, for balancing the distribution of empty vehicles within the network, and for providing an empty space for vehicles approaching a station. Each of these tasks involves a decision on the trip that has to be done by a selected empty vehicle from its actual location to some determined destination. The decisions are based on a multi‐parameter function involving a set of factors and thresholds. An important feature of the algorithm is that it does not use any central database of passenger input (demand) and locations of free vehicles. Instead, it is based on the local exchange of data between stations: on their states and on the vehicles they expect. Therefore, it seems well‐tailored for a distributed implementation. The algorithm is uniform, meaning that the same basic procedure is used for multiple tasks using a task‐specific set of parameters. Copyright © 2016 John Wiley & Sons, Ltd.     

Joint deployment of charging stations and photovoltaic power plants for electric vehicles

The focus of this study is to jointly design charging stations and photovoltaic (PV) power plants with time-dependent charging fee, to improve the management of the coupled transportation and power systems. We first propose an efficient and extended label-setting algorithm to solve the EV joint routing and charging problem that considers recharging amount choices at different stations and loop movement cases. Then, a variational inequality problem is formulated to model the equilibrium of EV traffic on transportation networks, and an optimal power flow model is proposed to model the power network flow with PV power plants and optimally serve the EV charging requirements. Based on the above models for describing system states, we then formulate a model to simultaneously design charging stations, PV plants, and time-dependent charging fee. A surrogate-based optimization (SBO) algorithm is adopted to solve the model. Numerical examples demonstrate that the proposed SBO algorithm performs well. Additionally, important insights concerning the infrastructure design and price management of the coupled transportation and power networks are derived accordingly.     

Fixed‐route taxi system: route network design and fleet size minimization problems

This paper introduces the taxi route network design problem (TXRNDP) for a fixed‐route taxi service operating in Iran and, in similar form, in various other developing countries. The service operates fairly similar to regular transit services in that vehicles are only permitted to follow a certain predetermined route on the network. The service is provided with small size vehicles and main features are that vehicles only depart if full and that there are no intermediate boarding stops. In Iran the service attracts a high modal share but requires better coordination which is the main motivation for the present study. We develop a mathematical programming model to minimize the total travel time experienced by passengers while constraining the number of taxi lines, the trip transfer ratio and the length of taxi lines. A number of assumptions are introduced in order to allow finding an exact rather than heuristic solution. We further develop a linear programming solution to minimize the number of taxis required to serve the previously found fixed‐route taxi network. Results of a case study with the city of Zanjan, Iran, illustrate the resulting taxi flows and suggest the capability of the proposed model to reduce the total travel time, the total waiting time and the number of taxi lines compared to the current taxi operation. Copyright © 2016 John Wiley & Sons, Ltd.     

Consistent formulation of network equilibrium with stochastic flows

Traffic flows in real-life transportation systems vary on a daily basis. According to traffic flow theory, such variability should induce a similar variability in travel times, but this “internal consistency” is generally not captured by existing network equilibrium models. We present an internally-consistent network equilibrium approach, which considers two potential sources of flow variability: (i) daily variation in route choice and (ii) daily variation in origin–destination demand. We particularly aspire to a flexible formulation that permits alternative statistical assumptions, which allows the best fit to be made to observed variability data in particular applications. Joint probability distributions of route—and therefore link—flows are derived under several assumptions concerning stochastic driver behavior. A stochastic network equilibrium model with stochastic demands and route choices is formulated as a fixed point problem. We explore limiting cases which allow an equivalent convex optimization problem to be defined, and finally apply this method to a real-life network of Kanazawa City, Japan.     

The design of capacitated intermodal hub networks with different vehicle types

In this study, we allow using alternative transportation modes and different types of vehicles in the hub networks to be designed. The aim of the problem is to determine the locations and capacities of hubs, which transportation modes to serve at hubs, allocation of non-hub nodes to hubs, and the number of vehicles of each type to operate on the hub network to route the demand between origin-destination pairs with minimum total cost. Total cost includes fixed costs of establishing hubs with different capacities, purchasing and operational costs of vehicles, transportation costs, and material handling costs. A mixed-integer programming model is developed and a variable neighborhood search algorithm is proposed for the solution of this problem. The heuristic algorithm is tested on instances from the Turkish network and CAB data set. Extensive computational analyzes are conducted in order to observe the effects of changes in various problem parameters on the resulting hub networks.     

Intermodal Transit System Coordination

In urban areas where transit demand is widely spread, passengers may be served by an intermodal transit system, consisting of a rail transit line (or a bus rapid transit route) and a number of feeder routes connecting at different transfer stations. In such a system, passengers may need one or more transfers to complete their journey. Therefore, scheduling vehicles operating in the system with special attention to reduce transfer time can contribute significantly to service quality improvements. Schedule synchronization may significantly reduce transfer delays at transfer stations where various routes interconnect. Since vehicle arrivals are stochastic, slack time allowances in vehicle schedules may be desirable to reduce the probability of missed connections. An objective total cost function, including supplier and user costs, is formulated for optimizing the coordination of a general intermodal transit network. A four-stage procedure is developed for determining the optimal coordination status among routes at every transfer station. Considering stochastic feeder vehicle arrivals at transfer stations, the slack times of coordinated routes are optimized, by balancing the savings from transfer delays and additional cost from slack delays and operating costs. The model thus developed is used to optimize the coordination of an intermodal transit network, while the impact of a range of factors on coordination (e.g., demand, standard deviation of vehicle arrival times, etc) is examined.     

Evaluating critical lines and stations considering the impact of the consequence using transit assignment model ‐case study of London's underground network

As the problem of full transit vehicles is encountered daily by passengers in most of the big cities, previous research evaluated the consequence of overcrowding in terms of on‐board crowding and passengers not being able to board with full vehicles. The impact of overcrowding in the real world is, however, not necessarily proportional to these numbers. This paper attempts to specify the critical lines and stations of a network by considering the number of passengers failing to board and attempting to evaluate its impact on service quality and safety risks. The hypothesis is that larger stations with wider platforms can often cope better with overcrowding than smaller stations. Therefore a station size dependent satisfaction function is proposed, which takes values from 0 to 1. The method is applied to London's underground network with a number of scenarios which show critical stations in the network if delays occur.