Traffic conflict models to evaluate the safety of signalized intersections at the cycle level

The safety of signalized intersections has often been evaluated at an aggregate level relating collisions to annual traffic volume and the geometric characteristics of the intersection. However, for many safety issues, it is essential to understand how changes in traffic parameters and signal control affect safety at the signal cycle level. This paper develops conflict-based safety performance functions (SPFs) for signalized intersections at the signal cycle level. Traffic video-data was recorded for six signalized intersections located in two cities in Canada. A video analysis procedure is proposed to collect rear-end conflicts and various traffic variables at each signal cycle from the recorded videos. The traffic variables include: traffic volume, maximum queue length, shock wave characteristics (e.g. shock wave speed and shock wave area), and the platoon ratio. The SPFs are developed using the generalized linear models (GLM) approach. The results show that all models have good fit and almost all the explanatory variables are statistically significant leading to better prediction of conflict occurrence beyond what can be expected from the traffic volume only. Furthermore, space-time conflict heat maps are developed to investigate the distribution of the traffic conflicts. The heat maps illustrate graphically the association between rear-end conflicts and various traffic parameters. The developed models can give insight about how changes in the signal cycle design affect the safety of signalized intersections. The overall goal is to use the developed models for the real-time optimization of signalized intersection safety by changing the signal design.     

Evaluation of a public transportation level of service concept

The level of service of a bus line is evaluated by its operational characteristics, particularly by the ratio between average bus travel time on a given route and the average passenger car travel time on the shortest distance between the origin and the destination of the bus in question. It is shown that the level-of-service measure may be predicted by such independent variables as route length, average distance between bus stations, number of signalized and unsignalized intersections, and the ratio between such intersections. It is hypothesized that use of other independent variables such as boarding and alighting passengers, or volume to capacity ratio on the route concerned, could improve the predictive power of the suggested models. Further research is recommended on the effect of these latter variables and other operational variables which might influence bus level of service, and also on the comparison between direct bus lines and lines which use transfer points.     

Characterizing on-road variables that affect passenger vehicle modal operation

The current research direction in transportation-related air-quality modeling is towards development and implementation of modal emissions models that correlate emission rates to specific ranges of activity. This paper describes a methodology to identify roadway characteristics at signalized intersections which affect the fraction of vehicle activity spend in specific operating modes where modal emission rate models indicate elevated emissions occur to improve vehicle activity inputs to modal emissions models. Field studies using laser guns were conducted on-road collecting second-by-second activity for individual vehicles at signal-controlled intersections and roadway segments. Hierarchical tree-based regression analysis was used to identify on-road geometric and operational characteristics that influenced the fractions of vehicle activity spent in specific modes. Results indicated that queue position, grade, downstream and upstream per-lane hourly volume, distance to the nearest downstream signalized intersection, percent heavy vehicles, and posted link speed limit were the most statistically significant variables.     

Disaggregate safety evaluation for signalized intersections and evaluation tool

This study was to evaluate traffic safety of four‐legged signalized intersections and to develop a spreadsheet tool for identifying high‐risk intersections taking into consideration vehicle movements, left‐turn signal phase types, and times of day. The study used data from Virginia and employed count data models and the empirical Bayes (EB) method for safety evaluation of such intersections. It was found that crash pattern defined by vehicle movements involved in a crash and time of day are important factors for intersection crash analysis. Especially for a safety performance function (SPF), a model specification (Poisson or NB), inclusion of left‐turn signal types, type of traffic flow variables, variable functional forms, and/or magnitudes of coefficients turned out to be different across times of day and crash patterns. The spreadsheet application tool was developed incorporating the developed SPFs and the EB method. As long as Synchro files for signal plans and crash database are maintained, no additional field data collection efforts are required. Adjusting the developed SPFs and the spreadsheet for recent traffic and safety conditions can be done by applying the calibration methods employed in the SafetyAnalyst software and the Highway Safety Manual. Implementing the developed tool equipped with streamlining data entry would greatly improve accuracy and efficiency of safety evaluation of four‐legged signalized intersections in localities and highway agencies that cannot operate the SafetyAnalyst. Copyright © 2010 John Wiley & Sons, Ltd.     

Severity of pedestrian injuries due to traffic crashes at signalized intersections in Hong Kong: a Bayesian spatial logit model

The present study intended to (1) investigate the injury risk of pedestrian casualties involved in traffic crashes at signalized intersections in Hong Kong; (2) determine the effect of pedestrian volumes on the severity levels of pedestrian injuries; and (3) explore the role of spatial correlation in econometric crash‐severity models. The data from 1889 pedestrian‐related crashes at 318 signalized intersections between 2008 and 2012 were elaborately collected from the Traffic Accident Database System maintained by the Hong Kong Transport Department. To account for the cross‐intersection heterogeneity, a Bayesian hierarchical logit model with uncorrelated and spatially correlated random effects was developed. An intrinsic conditional autoregressive prior was specified for the spatial correlation term. Results revealed that (1) signalized intersections with greater pedestrian volumes generally exhibited a lower injury risk; (2) ignoring the spatial correlation potentially results in reduced model goodness‐of‐fit, an underestimation of variability and standard error of parameter estimates, as well as inconsistent, biased, and erroneous inference; (3) special attention should be paid to the following factors, which led to a significantly higher probability of pedestrians being killed or sustaining severe injury: pedestrian age greater than 65 years, casualties with head injuries, crashes that occurred on footpaths that were not obstructed/overcrowded, heedless or inattentive crossing, crashes on the two‐way carriageway, and those that occurred near tram or light‐rail transit stops. Copyright © 2017 John Wiley & Sons, Ltd.     

Pedestrian delay estimation at signalized intersections in developing cities

This paper proposes a pedestrian delay model suitable for signalized intersections in developing cities, on the basis of a field study conducted in Xi’an, China. The field study consisted of two parts: Part I involved only one crosswalk, and the signal cycle was divided into 13 subphases; Part II involved 13 crosswalks, but the signal cycles were only divided into green phases and non-green phases. It was found that pedestrian arrival rates were not uniform throughout cycles; pedestrians arriving during green phases might also receive delays; pedestrian signal non-compliance was so severe that delays were greatly reduced, but non-complying pedestrians might still receive delays; and for pedestrians walking different directions, though the relationships between average delay and arrival subphase were different, the overall average delays were almost the same. On the basis of the field study results, some assumptions are made about the relationship between average pedestrian delay and arrival subphase, and a new model is developed to estimate pedestrian delays at signalized intersections. The model is validated using the field data, and the validation results indicate that in Xi’an the new model provides much more accurate estimation than the existing models.     

Speed,travel time and delay for intersections and road segments in the Montreal network using cyclist Smartphone GPS data

Very little is known about cyclist speeds and delays at the disaggregate level of each road segment and intersection in an entire city network. Speeds and delays serve as vital information for planning, navigation and routing purposes including how they differ for different times of the day and across road and bicycle facility types, after controlling for other factors. In this work, we explore the use of recent GPS cyclist trip data, from the Mon RésoVélo Smartphone application, to identify different performance measures such as travel time, speed and delay at the level of the entire network of roads and intersections on the island of Montreal. Also, a linear regression model is formulated to identify the geometric design and built environment characteristics affecting cyclist speeds on road segments. Among other results, on average, segment speeds are greater along arterials than on local streets and greater along segments with bicycle infrastructure than those without. Incorporating different measures of cyclist personality in the models revealed that the following characteristics all affect cyclist speeds along segments, each cyclist’s average speed on uphill, downhill and level segments as well as geometric design and built environment characteristics. The model results also identify that the factors that increase cyclist speeds along segments include, segments which have cyclists biking for work or school related purposes, segments used during morning peak and segments which do not have signalized intersections at either end.     

Investigating the applicability of exclusive pedestrian phase at two‐phase actuated controlled intersections

The exclusive pedestrian phase (EPP) has been used in many countries to promote walking around downtown areas by increasing the ease and convenience of pedestrian crossing. However, its applicability has not been systematically demonstrated, especially when an intersection is operated in actuated mode. This paper presents an extensive simulation‐based analysis of the applicability of EPP as compared with a normal concurrent pedestrian‐phase pattern at an isolated intersection controlled by actuated logic. Actuated signal control logics for EPP‐actuated and conventional concurrent pedestrian phase‐actuated controls are developed. Both of these control logics consider pedestrian crossing demands and can adapt to changes in vehicle traffic to reduce vehicle delay as well. A simulation model of a two‐phase controlled intersection is built and calibrated based on field data using VISSIM (PTV Planung Transport Verkehr AG in Karlsruhe, Germany). Extensive analysis is conducted to reveal fully the applicable EPP domain in terms of vehicle traffic demand, pedestrian demand, vehicle turning ratio, and pedestrian diagonal crossing ratio. The results show that the performance and applicable domain of EPP are jointly determined by those five factors. EPP significantly outperforms concurrent pedestrian phase if the vehicle turning ratio is greater than 0.6 and the pedestrian diagonal crossing ratio is greater than 0.6. These results can help traffic engineers in choosing the appropriate pedestrian‐phase patterns at actuated signalized intersections. Copyright © 2015 John Wiley & Sons, Ltd.     

A study of the bi-directional pedestrian flow characteristics at Hong Kong signalized crosswalk facilities

This paper investigates the bi-directional flow characteristics at signalized crosswalk facilities in Hong Kong. Pedestrian flow measurements were conducted at selected signalized crosswalks in Hong Kong urban area with and without the Light Rail Transit (LRT) railway tracks in the median of the carriageway. The pedestrian speed-flow functions for these crosswalk facilities were calibrated. The relationships between the walking speed at capacity and directional distribution of pedestrian flow (or flow ratio) are determined. The effects of different flow ratio on the effective capacity are also investigated. The bi-directional pedestrian flow effects on signalized crosswalk facilities with LRT tracks are found more significant than those without LRT tracks. The result could be used as a basis to improve the assessment of the crosswalk's capacity and to determine the design walking speeds under different flow ratios at signalized crosswalks in Hong Kong and in other Asian cities with similar environments.     

Analytical model of traffic delays under bus signal preemption: Theory and application

Major emphasis has been placed in recent years on the improvement of the operations of existing transportation facilities, using Transportation Systems Management strategies. Accordingly, preferential treatment of high occupancy vehicles is playing an increasing role in transportation projects. This paper deals with one of these strategies, the priority treatment of buses at signalized intersections. Such treatment is aimed at improving the capacity of intersections. The paper develops an analytical model of delays at signalized intersections under a bus preemption scheme. The analysis is presented for the simplest case, i.e., two intersecting one-way streets. The results suggests that the benefits of bus preemption can be increased by properly adjusting several design parameters such as cycle and phase duration of the preempted phases as well as the non-preempted parameters. The model outlined in this paper is applicable to any situation in which stochastic variation is introduced into the signal cycle as well as to bus preemption. Consequently, other potential applications of the model include the design/analysis of traffic actuated signals, and pedestrian actuated signals.     

Optimization of pedestrian phase patterns at signalized intersections: a multi‐objective approach

This paper presents a multi‐objective optimization model and its solution algorithm for optimization of pedestrian phase patterns, including the exclusive pedestrian phase (EPP) and the conventional two‐way crossing (TWC) at an intersection. The proposed model will determine the optimal pedestrian phase pattern and the corresponding signal timings at an intersection to best accommodate both vehicular traffic and pedestrian movements. The proposed model is unique with respect to the following three critical features: (1) proposing an unbiased performance index for comparison of EPP and TWC by explicitly modeling the pedestrian delay under the control of TWC and EPP; (2) developing a multi‐objective model to maximize the utilization of the available green time by vehicular traffic and pedestrian under both EPP or TWC; and (3) designing a genetic algorithm based heuristic algorithm to solve the model. Case study and sensitivity analysis results have shown the promising property of the proposed model to assist traffic practitioners, researchers, and authorities in properly selecting pedestrian phase patterns at signalized intersections. Copyright © 2013 John Wiley & Sons, Ltd.     

An exact modelling of the uniform control traffic delay in undersaturated signalized intersections

The average delay experienced by vehicles at a signalized intersection defines the level of service (LOS) at which the intersection operates. A major challenge in this regard is the ability to accurately estimate all the components underlying the overall control delay, including the uniform, incremental and initial queue delays. This paper tackles this challenging task by proposing a novel exact model of the uniform control delay component with a view to enhancing the accuracy of the existing approximate models, notably, the one reported in the Highway Capacity Manual 2010. Both graphical and analytical proofs are employed to derive exact closed‐form expressions for the uniform control delay at undersaturated signalized intersections. The high degree of accuracy of the proposed models is analysed through extensive simulations to demonstrate their abilities to exactly characterize the performance of real‐life intersections in terms of the resulting vehicle delay. Unlike the existing widely adopted uniform delay models, which tend to overestimate the LOS of real‐life intersections, the delay models introduced in this paper have the merit of exactly capturing such a LOS. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of destination choice models for pedestrian travel

Most research on walking behavior has focused on mode choice or walk trip frequency. In contrast, this study is one of the first to analyze and model the destination choice behaviors of pedestrians within an entire region. Using about 4500 walk trips from a 2011 household travel survey in the Portland, Oregon, region, we estimated multinomial logit pedestrian destination choice models for six trip purposes. Independent variables included terms for impedance (walk trip distance), size (employment by type, households), supportive pedestrian environments (parks, a pedestrian index of the environment variable called PIE), barriers to walking (terrain, industrial-type employment), and traveler characteristics. Unique to this study was the use of small-scale destination zone alternatives. Distance was a significant deterrent to pedestrian destination choice, and people in carless or childless households were less sensitive to distance for some purposes. Employment (especially retail) was a strong attractor: doubling the number of jobs nearly doubled the odds of choosing a destination for home-based shopping walk trips. More attractive pedestrian environments were also positively associated with pedestrian destination choice after controlling for other factors. These results shed light on determinants of pedestrian destination choice behaviors, and sensitivities in the models highlight potential policy-levers to increase walking activity. In addition, the destination choice models can be applied in practice within existing regional travel demand models or as pedestrian planning tools to evaluate land use and transportation policy and investment scenarios.     

Traffic performance of shared lanes at signalized intersections based on cellular automata modeling

Shared lanes at signalized intersections are designed for use by vehicles of different movement directions. Shared lane usage increases the flexibility of assigning lane grouping to accommodate variable traffic volume by direction. However, a shared lane is not always beneficial as it can at time result in blockage that leads to both capacity and safety constraints. This paper establishes a cellular automata model to simulate traffic movements at signalized intersections with shared lanes. Several simulation experiments are carried out both for a single shared lane and for an approach with a shared lane. Simulation of a single shared lane used by straight‐through and right‐turn (as similar to left‐turn in the USA) vehicles suggests that the largest travel delay occurs when traffic volumes (vehicles/lane) of the two movement streams along the shared lane are at about the same level. For a trial lane‐group with a shared lane, when traffic volumes of the two movement streams are quite different, the shared lane usage is not efficient in terms of reduction in traffic delay. The simulation results are able to produce the threshold traffic volume to arrange a shared lane along an approach. Copyright © 2013 John Wiley & Sons, Ltd.     

Operational analysis of the contraflow left-turn lane design at signalized intersections in China

The primary objective of the study was to evaluate the impacts of an unconventional left-turn treatment called contraflow left-turn lane (CLL) on the operational performance of left-turn movement at signalized intersections. An analytical model was developed for estimating the capacity of left-turn movement at signalized intersections with the CLL design. The capacity model was calibrated and validated using field data collected at six approaches at five signalized intersections in the city of Handan, China. The results of field data analyses showed that the use of CLL design improved the capacity of left-turn movements. However, the capacity gains with the CLL design were quite stochastic considering the randomness in the arrivals of left-turning vehicles. Analytical delay models were proposed for estimating the delay to left-turning vehicles at intersections with the CLL design. A procedure was also proposed for optimizing the location of the upstream median opening and the green interval of the pre-signal. Simulation analyses were conducted to compare the delay experienced by the left-turning and through vehicles at signalized intersections with the conventional left-turn lane, the CLL and another unconventional left-turn treatment entitled “tandem design”. The results showed that both CLL and tandem designs outperformed conventional left-turn lane design; and the CLL design generated less delay to both the left-turning and through vehicles as compared with the tandem design.     

Platoons of connected vehicles can double throughput in urban roads

Intersections are the bottlenecks of the urban road system because an intersection’s capacity is only a fraction of the maximum flows that the roads connecting to the intersection can carry. This capacity can be increased if vehicles cross the intersections in platoons rather than one by one as they do today. Platoon formation is enabled by connected vehicle technology. This paper assesses the potential mobility benefits of platooning. It argues that saturation flow rates, and hence intersection capacity, can be doubled or tripled by platooning. The argument is supported by the analysis of three queuing models and by the simulation of a road network with 16 intersections and 73 links. The queuing analysis and the simulations reveal that a signalized network with fixed time control will support an increase in demand by a factor of (say) two or three if all saturation flows are increased by the same factor, with no change in the control. Furthermore, despite the increased demand vehicles will experience the same delay and travel time. The same scaling improvement is achieved when the fixed time control is replaced by the max pressure adaptive control. Part of the capacity increase can alternatively be used to reduce queue lengths and the associated queuing delay by decreasing the cycle time. Impediments to the control of connected vehicles to achieve platooning at intersections appear to be small.     

Commuters’ willingness-to-pay for improvement of transfer facilities in and around metro stations – A case study in Kolkata

Although several cities in India are developing the metro system, there are lacunas associated with transfer facilities in and around metro stations. The present work aims to investigate the perception of commuters of Kolkata city, India in terms of their willingness-to-pay (WTP) for improvement of transfer facilities. A stated preference survey instrument was designed to collect choice responses from metro commuters and the database was analysed by developing random parameter logit (RPL) models. The decomposition effects of various socioeconomic and trip characteristics on mean estimates were also investigated in random parameter logit models with heterogeneity. The work indicates significantly high WTP of metro commuters as compared to the average metro fare for improvement of various qualitative attributes of transfer facility such as ‘facility for level change’, ‘visual communication’, ‘pedestrian crossing’, and ‘pedestrian environment’. The WTP values are also found to vary across different groups of commuter formed on the basis of ‘trip purpose’, ‘monthly household income’, ‘station type’ and ‘metro fare’. ‘Work trip’ commuters are found to have higher WTP for improvement of access time, pedestrian environment and use of an escalator over the elevator. On the other hand, ‘high-income group’ commuters have shown higher WTP for improvement of access time, pedestrian crossing, and pedestrian environment. While ‘high fare group’ commuters have higher WTP for access time and pedestrian environment, heterogeneity is also observed in WTP for facility for level change, pedestrian crossing, and pedestrian environment across commuters using different ‘station type’ (underground, at-grade, and elevated). The findings from the study provide a basis for formulating policies for the improvement of transfer facilities in and around metro stations giving due attention to the preference of commuters having different socioeconomic and trip characteristics.     

Review on Theoretical Delay Estimation Model for Signalized Intersections

Traffic delay is an effective index for estimating the performance of a signalized intersection. In this study, we provide a comprehensive review of the theoretical delay estimation model over the last ca. 90 years. For fixed-time signalized intersections, we classified the estimation development process into three stages. Stage 1 covered 1920s–1970s, when approaches based on steady-state theory were derived. These methods obtain accurate predictions with low degrees of saturation, but overestimate the delay with higher saturation and cannot provide reasonable results for oversaturated conditions. To accommodate high saturation, time-dependent models were proposed and improved in Stage 2, 1970s–2000s, using coordination transformation techniques. Progression factors to account for the filtering impact from upstream intersections were also introduced during this period. Due to inaccurate approximation of certain specific traffic conditions, some modified approaches and supplementary terms were derived from 2000 onwards (Stage 3), which facilitate the evolution of the delay estimation method and improved approximation results. Some new techniques, including artificial intelligence algorithms, were also introduced into delay estimation in this era. We also describe theoretical delay measurement methods for actuated control intersections with a similar time line. From our summary of the evolution of theoretical delay models, we highlight some deficiencies and future research directions.     

Stochastic adaptive control model for traffic signal systems

An adaptive control model of a network of signalized intersections is proposed based on a discrete-time, stationary, Markov decision process. The model incorporates probabilistic forecasts of individual vehicle actuations at downstream inductance loop detectors that are derived from a macroscopic link transfer function. The model is tested both on a typical isolated traffic intersection and a simple network comprised of five four-legged signalized intersections, and compared to full-actuated control. Analyses of simulation results using this approach show significant improvement over traditional full-actuated control, especially for the case of high volume, but not saturated, traffic demand.