Estimating fuel burn impacts of taxi-out delay with implications for gate-hold benefits

The aviation community is actively investigating initiatives to reduce aircraft fuel consumption from surface operations, as surface management strategies may face fewer implementation barriers compared with en route strategies. One fuel-saving initiative for the air transportation system is the possibility of holding aircraft at the gate, or the spot, until the point at which they can taxi unimpeded to the departure runway. The extent to which gate holding strategies have financial and environmental benefits hinges on the quantity of fuel that is consumed during surface operations. A pilot of an aircraft may execute the taxi procedure on a single engine or utilize different engine thrust rates during taxi because of a delay. In the following study, we use airline fuel consumption data to estimate aircraft taxi fuel consumption rates during the “unimpeded” and “delayed” portions of taxi time. We find that the fuel consumption attributed to a minute of taxi-out delay is less than that attributed to minute of unimpeded taxi time; for some aircraft types, the fuel consumption rate for a minute of taxi delay is half of that for unimpeded taxi. It is therefore not appropriate, even for rough calculations, to apply nominal taxi fuel consumption rates to convert delayed taxi-out time into fuel burn. On average we find that eliminating taxi delay would reduce overall flight fuel consumption by about 1%. When we consider the savings on an airport-by-airport basis, we find that for some airports the potential reduction from reducing taxi delay is as much as 2%.     

A platoon based cooperative eco-driving model for mixed automated and human-driven vehicles at a signalised intersection

The advancements in communication and sensing technologies can be exploited to assist the drivers in making better decisions. In this paper, we consider the design of a real-time cooperative eco-driving strategy for a group of vehicles with mixed automated vehicles (AVs) and human-driven vehicles (HVs). The lead vehicles in the platoon can receive the signal phase and timing information via vehicle-to-infrastructure (V2I) communication and the traffic states of both the preceding vehicle and current platoon via vehicle-to-vehicle (V2V) communication. We propose a receding horizon model predictive control (MPC) method to minimise the fuel consumption for platoons and drive the platoons to pass the intersection on a green phase. The method is then extended to dynamic platoon splitting and merging rules for cooperation among AVs and HVs in response to the high variation in urban traffic flow. Extensive simulation tests are also conducted to demonstrate the performance of the model in various conditions in the mixed traffic flow and different penetration rates of AVs. Our model shows that the cooperation between AVs and HVs can further smooth out the trajectory of the latter and reduce the fuel consumption of the entire traffic system, especially for the low penetration of AVs. It is noteworthy that the proposed model does not compromise the traffic efficiency and the driving comfort while achieving the eco-driving strategy.     

Preference-based evolutionary algorithm for airport surface operations

In addition to time efficiency, minimisation of fuel consumption and related emissions has started to be considered by research on optimisation of airport surface operations as more airports face severe congestion and tightening environmental regulations. Objectives are related to economic cost which can be used as preferences to search for a region of cost efficient and Pareto optimal solutions. A multi-objective evolutionary optimisation framework with preferences is proposed in this paper to solve a complex optimisation problem integrating runway scheduling and airport ground movement problem. The evolutionary search algorithm uses modified crowding distance in the replacement procedure to take into account cost of delay and fuel price. Furthermore, uncertainty inherent in prices is reflected by expressing preferences as an interval. Preference information is used to control the extent of region of interest, which has a beneficial effect on algorithm performance. As a result, the search algorithm can achieve faster convergence and potentially better solutions. A filtering procedure is further proposed to select an evenly distributed subset of Pareto optimal solutions in order to reduce its size and help the decision maker. The computational results with data from major international hub airports show the efficiency of the proposed approach.     

Connectivity-based optimization of vehicle route and speed for improved fuel economy

Traditionally, vehicle route planning problem focuses on route optimization based on traffic data and surrounding environment. This paper proposes a novel extended vehicle route planning problem, called vehicle macroscopic motion planning (VMMP) problem, to optimize vehicle route and speed simultaneously using both traffic data and vehicle characteristics to improve fuel economy for a given expected trip time. The required traffic data and neighbouring vehicle dynamic parameters can be collected through the vehicle connectivity (e.g. vehicle-to-vehicle, vehicle-to-infrastructure, vehicle-to-cloud, etc.) developed rapidly in recent years. A genetic algorithm based co-optimization method, along with an adaptive real-time optimization strategy, is proposed to solve the proposed VMMP problem. It is able to provide the fuel economic route and reference speed for drivers or automated vehicles to improve the vehicle fuel economy. A co-simulation model, combining a traffic model based on SUMO (Simulation of Urban MObility) with a Simulink powertrain model, is developed to validate the proposed VMMP method. Four simulation studies, based on a real traffic network, are conducted for validating the proposed VMMP: (1) ideal traffic environment without traffic light and jam for studying the fuel economy improvement, (2) traffic environment with traffic light for validating the proposed traffic light penalty model, (3) traffic environment with traffic light and jam for validating the proposed adaptive real-time optimization strategy, and (4) investigating the effect of different powertrain platforms to fuel economy using two different vehicle platforms. Simulation results show that the proposed VMMP method is able to improve vehicle fuel economy significantly. For instance, comparing with the fastest route, the fuel economy using the proposed VMMP method is improved by up to 15%.     

Elasticities of fuel and traffic demand and the direct rebound effects: An econometric estimation in the case of Norway

We estimate the elasticities of fuel and travel demand with respect to fuel prices and income in the case of Norway. Furthermore, we derive the direct rebound effects that explain the degree to which a fuel price increase is “offset” in the form of greater fuel use and/or travel due to improvements in vehicle fuel efficiency. For this purpose, we use and compare two alternative econometric approaches: the error correction model (ECM) and the dynamic model. Our initial assumption is that one should not be indifferent with respect to the approach used to derive elasticities. The data used are for the period 1980–2011. Our results indicate the following: (1) the dynamic model fits the data better than the ECM model does; (2) the estimated elasticities of fuel demand with respect to price and income are −0.26 and 0.06 in the short run and −0.36 and 0.09 in the long run. For travel demand, the respective elasticities are −0.11 and 0.06 in the short run and −0.24 and 0.13 in the long run, implying inelastic demands for fuel and travel demand; and (3) rebound effects indicate that 0.26% and 0.06% of fuel savings as a result of fuel price increase will be offset in the form of more fuel use in the short run and in the long run, respectively, if fuel efficiency increases by 1%. Our policy recommendations are that policies should not be indifferent to the methods used to derive elasticities. We contend that it is crucial to seriously consider rebound effects in policy making because basic elasticity estimates exaggerate the impact of fuel price increases.     

Comparison of emerging ground propulsion systems for electrified aircraft taxi operations

Aviation is a mode with high fuel consumption per passenger mile and has significant environmental impacts. It is important to seek ways to reduce fuel consumption by the aviation sector, but it is difficult to improve fuel efficiency during the en-route cruise phase of flight because of technology barriers, safety requirements, and the mode of operations of air transportation. Recent efforts have emphasized the development of innovative Aircraft Ground Propulsion Systems (AGPS) for electrified aircraft taxi operations. These new technologies are expected to significantly reduce aircraft ground-movement-related fuel burn and emissions. This study compares various emerging AGPS systems and presents a comprehensive review on the merits and demerits of each system, followed with the local environmental impacts assessment of these systems. Using operational data for the 10 busiest U.S. airports, a comparison of environmental impacts is performed for four kinds of AGPS: conventional, single engine-on, external, and on-board systems. The results show that there are tradeoffs in fuel and emissions among these emerging technologies. On-board system shows the best performance in the emission reduction, while external system shows the least fuel burn. Compared to single-engine scenario, external AGPS shows the reduction of HC and CO emissions but the increase of NO_x emission. When a general indicator is considered, on-board AGPS shows the best potential of reducing local environmental impacts. The benefit-cost analysis shows that both external and on-board systems are worth being implemented and the on-board system appeals to be more beneficial.     

Data-driven fuel consumption estimation: A multivariate adaptive regression spline approach

Providing guidance and information to drivers to help them make fuel-efficient route choices remains an important and effective strategy in the near term to reduce fuel consumption from the transportation sector. One key component in implementing this strategy is a fuel-consumption estimation model. In this paper, we developed a mesoscopic fuel consumption estimation model that can be implemented into an eco-routing system. Our proposed model presents a framework that utilizes large-scale, real-world driving data, clusters road links by free-flow speed and fits one statistical model for each of cluster. This model includes predicting variables that were rarely or never considered before, such as free-flow speed and number of lanes. We applied the model to a real-world driving data set based on a global positioning system travel survey in the Philadelphia-Camden-Trenton metropolitan area. Results from the statistical analyses indicate that the independent variables we chose influence the fuel consumption rates of vehicles. But the magnitude and direction of the influences are dependent on the type of road links, specifically free-flow speeds of links. A statistical diagnostic is conducted to ensure the validity of the models and results. Although the real-world driving data we used to develop statistical relationships are specific to one region, the framework we developed can be easily adjusted and used to explore the fuel consumption relationship in other regions.     

Effects of driving style on the fuel consumption of city buses under different road conditions and vehicle masses

The variance in fuel consumption caused by driving style (DS) difference exceeds 10% and reaches a maximum of 20% under different road conditions, even for experienced bus drivers. To study the influence of DS on fuel consumption, a method for summarizing DS characteristic parameters on the basis of vehicle-engine combined model is proposed. With this method, the author proposes 26 DS characteristic parameters related to fuel consumption in the accelerating, normal running, and decelerating processes of vehicles. The influence of DS characteristic parameters on fuel consumption under different road conditions and vehicle masses is quantitatively analyzed on the basis of real driving data over 100,000 km. Analysis results show that the influence of DS characteristic parameters on fuel consumption changes with road condition and vehicle mass, with road condition serving a more important function. However, the DS characteristics in the accelerating process of vehicles are decisive for fuel consumption under different conditions. This study also calculates the minimum sample size necessary for analyzing the effect of DS characteristics on fuel consumption. The statistical analysis based on the real driving data over 2500 km can determine the influence of DS on fuel consumption under a given power-train configuration and road condition. The analysis results can be employed to evaluate the fuel consumption of drivers, as well as to guide the design of Driver Advisory System for Eco-driving directly.     

Combining Intermodal Transport With Electric Vehicles: Towards More Sustainable Solutions

Abstract

This paper analyses the feasibility of incorporating electric or hybrid vehicles in intermodal transport for the transportation of containers in the pre- and post haulage (PPH) operation. In Europe, the intermodal transport market is being strongly supported, as it is seen as one of the keystones of a sustainable mobility system policy. The introduction of environmentally friendly electric/hybrid vehicles for the pre- and post haulage operation would mean a further enhancement leading to a more complete ecological intermodal transport chain. PPH operations are usually no longer than 30 km, and, hence, could possibly be handled by electric or hybrid vehicles.

Hybrid electric vehicles (HEV) combine electric and other drive systems, such as internal combustion engines, gas turbines and fuel cells. Hybrid electric vehicles merge the zero pollution and high efficiency benefits of electric traction with the high fuel energy density benefits of an energy source or thermal engine. The use of electrically driven vehicles for goods distribution has already been successfully proven in international demonstration projects, such as ELCIDIS. Transport of intermodal units (such as ISO containers), however, requires electric/hybrid heavy-duty goods vehicles, which are not readily available on the market, but for which the technology exists.

Different possibilities are assessed as to their technical, financial, organizational and environmental feasibility and suitability. This analysis is based on a typical mission for pre-and post haulage operations, such as type of trips, distance, frequency, urban/suburban, etc.     

The multi-port berth allocation problem with speed optimization and emission considerations

The container shipping industry faces many interrelated challenges and opportunities, as its role in the global trading system has become increasingly important over the last decades. On the one side, collaboration between port terminals and shipping liners can lead to costs savings and help achieve a sustainable supply chain, and on the other side, the optimization of operations and sailing times leads to reductions in bunker consumption and, thus, to fuel cost and air emissions reductions. To that effect, there is an increasing need to address the integration opportunities and environmental issues related to container shipping through optimization. This paper focuses on the well known Berth Allocation Problem (BAP), an optimization problem assigning berthing times and positions to vessels in container terminals. We introduce a novel mathematical formulation that extends the classical BAP to cover multiple ports in a shipping network under the assumption of strong cooperation between shipping lines and terminals. Speed is optimized on all sailing legs between ports, demonstrating the effect of speed optimization in reducing the total time of the operation, as well as total fuel consumption and emissions. Furthermore, the model implementation shows that an accurate speed discretization can result in far better economic and environmental results.     

Evaluating the impacts of urban corridor traffic signal optimization on vehicle emissions and fuel consumption

This study investigates the impacts of traffic signal timing optimization on vehicular fuel consumption and emissions at an urban corridor. The traffic signal optimization approach proposed integrates a TRANSIMS microscopic traffic simulator, the VT-Micro model (a microscopic emission and fuel consumption estimation model), and a genetic algorithm (GA)-based optimizer. An urban corridor consisting of four signalized intersections in Charlottesville, VA, USA, is used for a case study. The result of the case study is then compared with the best traffic signal timing plan generated by Synchro using the TRANSIMS microscopic traffic simulator. The proposed approach achieves much better performance than that of the best Synchro solution in terms of air quality, energy and mobility measures: 20% less network-wide fuel consumption, 8–20% less vehicle emissions, and nearly 27% less vehicle-hours-traveled (VHT).     

A fuzzy approach to addressing uncertainty in Airport Ground Movement optimisation

Allocating efficient routes to taxiing aircraft, known as the Ground Movement problem, is increasingly important as air traffic levels continue to increase. If taxiways cannot be reliably traversed quickly, aircraft can miss valuable assigned slots at the runway or can waste fuel waiting for other aircraft to clear. Efficient algorithms for this problem have been proposed, but little work has considered the uncertainties inherent in the domain. This paper proposes an adaptive Mamdani fuzzy rule based system to estimate taxi times and their uncertainties. Furthermore, the existing Quickest Path Problem with Time Windows (QPPTW) algorithm is adapted to use fuzzy taxi time estimates. Experiments with simulated taxi movements at Manchester Airport, the third-busiest in the UK, show the new approach produces routes that are more robust, reducing delays due to uncertain taxi times by 10–20% over the original QPPTW.     

Development a new power management strategy for power split hybrid electric vehicles

Reduction of greenhouse gas emission and fuel consumption as one of the main goals of automotive industry leading to the development hybrid vehicles. The objective of this paper is to investigate the energy management system and control strategies effect on fuel consumption, air pollution and performance of hybrid vehicles in various driving cycles. In order to simulate the hybrid vehicle, the combined feedback–feedforward architecture of the power-split hybrid electric vehicle based on Toyota Prius configuration is modeled, together with necessary dynamic features of subsystem or components in ADVISOR. Multi input fuzzy logic controller developed for energy management controller to improve the fuel economy of a power-split hybrid electric vehicle with contrast to conventional Toyota Prius Hybrid rule-based controller. Then, effects of battery’s initial state of charge, driving cycles and road grade investigated on hybrid vehicle performance to evaluate fuel consumption and pollution emissions. The simulation results represent the effectiveness and applicability of the proposed control strategy. Also, results indicate that proposed controller is reduced fuel consumption in real and modal driving cycles about 21% and 6% respectively.     

Eco-routing problem considering fuel consumption and probabilistic travel time budget

Road transportation is one of the major sources of greenhouse gas emissions. To reduce energy consumption and alleviate this environmental problem, this study aims to develop an eco-routing algorithm for navigation systems. Considering that both fuel consumption and travel time are important factors when planning a trip, the proposed routing algorithm finds a path that consumes the minimum amount of gasoline while ensuring that the travel time satisfies a specified travel time budget and an on-time arrival probability. We first develop link-based fuel consumption models based on vehicle dynamics, and then the Lagrangian-relaxation-based heuristic approach is proposed to efficiently solve this NP-hard problem. The performance of the proposed eco-routing strategy is verified in a large-scale network with real travel time and fuel consumption data. Specifically, a sensitivity analysis of fuel consumption reduction for travel demand and travel time buffer is discussed in our simulation study.     

Economic and emissions impacts of renewable fuel goals for aviation in the US

The US Federal Aviation Administration (FAA) has a goal that one billion gallons of renewable jet fuel is consumed by the US aviation industry each year from 2018. We examine the economic and emissions impacts of this goal using renewable fuel produced from a Hydroprocessed Esters and Fatty Acids (HEFA) process from renewable oils. Our approach employs an economy-wide model of economic activity and energy systems and a detailed partial equilibrium model of the aviation industry. If soybean oil is used as a feedstock, we find that meeting the aviation biofuel goal in 2020 will require an implicit subsidy from airlines to biofuel producers of $2.69 per gallon of renewable jet fuel. If the aviation goal can be met by fuel from oilseed rotation crops grown on otherwise fallow land, the implicit subsidy is $0.35 per gallon of renewable jet fuel. As commercial aviation biofuel consumption represents less than 2% of total fuel used by this industry, the goal has a small impact on the average price of jet fuel and carbon dioxide emissions. We also find that, under the pathways we examine, the cost per tonne of CO₂ abated due to aviation biofuels is between $50 and $400.     

Controlled time of arrival windows for already initiated energy-neutral continuous descent operations

Continuous descent operations with controlled times of arrival at one or several metering fixes could enable environmentally friendly procedures without compromising terminal airspace capacity. This paper focuses on controlled time of arrival updates once the descent has been already initiated, assessing the feasible time window (and associated fuel consumption) of continuous descent operations requiring neither thrust nor speed-brake usage along the whole descent (i.e. only elevator control is used to achieve different metering times). Based on previous works, an optimal control problem is formulated and numerically solved. The earliest and latest times of arrival at the initial approach fix have been computed for the descent of an Airbus A320 under different scenarios, considering the potential altitudes and distances to go when receiving the controlled time of arrival update. The effects of the aircraft mass, initial speed, longitudinal wind and position of the initial approach fix on the time window have been also investigated. Results show that time windows about three minutes could be achieved for certain conditions, and that there is a trade-off between robustness facing controlled time of arrival updates during the descent and fuel consumption. Interestingly, minimum fuel trajectories almost correspond to those of minimum time.     

Preferences for alternative fuel vehicles by Dutch local governments

Using a choice model, we estimate the preferences for alternative fuel vehicles by Dutch local governments. The analysis shows that local governments are willing to pay between 25% and 50% extra for an alternative fuel vehicle without a serious loss of utility. Further, local emissions are an important criterion on which to base a decision, especially for municipalities and provinces. We also calculate the utility for a number of prominent alternative fuel vehicles. We find that show that local governments value the battery electric vehicle and biogas internal combustion engine equally. It is important, however, that the time to refuel for electric vehicles is reduced to about 30 min.     

Driving cycle prediction model based on bus route features

Bus fuel economy is deeply influenced by the driving cycles, which vary for different route conditions. Buses optimized for a standard driving cycle are not necessarily suitable for actual driving conditions, and, therefore, it is critical to predict the driving cycles based on the route conditions. To conveniently predict representative driving cycles of special bus routes, this paper proposed a prediction model based on bus route features, which supports bus optimization. The relations between 27 inter-station characteristics and bus fuel economy were analyzed. According to the analysis, five inter-station route characteristics were abstracted to represent the bus route features, and four inter-station driving characteristics were abstracted to represent the driving cycle features between bus stations. Inter-station driving characteristic equations were established based on the multiple linear regression, reflecting the linear relationships between the five inter-station route characteristics and the four inter-station driving characteristics. Using kinematic segment classification, a basic driving cycle database was established, including 4704 different transmission matrices. Based on the inter-station driving characteristic equations and the basic driving cycle database, the driving cycle prediction model was developed, generating drive cycles by the iterative Markov chain for the assigned bus lines. The model was finally validated by more than 2 years of acquired data. The experimental results show that the predicted driving cycle is consistent with the historical average velocity profile, and the prediction similarity is 78.69%. The proposed model can be an effective way for the driving cycle prediction of bus routes.     

Reducing speed and fuel transfer of the Green Flag Incentive Program in Kaohsiung Port Taiwan

This research applied the Green Flag Program to assess the benefits of reducing speed and fuel transfer for large merchant vessels (bulk and container) entering Kaohsiung Port. This study adopts an activity-based model to calculate fuel consumption and emissions, as well as setting up two scenarios, (1) decrease vessel speed to 12 knots 20 nm away from port; and (2) decrease vessel speed to 12 knots and transfer fuel 20 nm away from port, which based on the Green Flag Program in Long Beach, in the U.S. The findings are (1) In scenario one, the container and bulk vessels saw reductions in CO₂ emissions of about 41% and 14%, respectively. In scenario two, container and bulk vessels had reductions of about 48% and 43% in SO₂ emissions, respectively. (2) Large vessels are more environmentally friendly than small vessels. (3) Using the CATCH model to assess the effectiveness of the two scenarios, it was found that container vessels benefited from both reducing speed and fuel transfer, while bulk carriers only did so from the former.     

Operational performance comparison of four unconventional intersection designs using micro‐simulation

Several unconventional intersection designs have been proposed as an innovative approach to mitigate congestion at heavily congested at‐grade signalized intersections. Many of these unconventional designs were shown to outperform conventional intersections in terms of the average control delay and the overall intersection capacity. Little research has been conducted to compare the performance of these unconventional intersections to each other under different volume conditions. This study evaluated and compared the operational performance of four unconventional intersection schemes: the crossover displaced left‐turn (XDL), the upstream signalized crossover (USC), the double crossover intersection (DXI) (i.e., half USC), and the median U‐turn (MUT). The micro‐simulation software vissim (PTV Planung Transport Verkehr AG, Karlsruhe, Germany) was used to model and analyze the four unconventional intersections as well as a counterpart conventional one. The results showed that the XDL intersection constantly exhibited the lowest delays at nearly all tested balanced and unbalanced volume levels. The operational performance of both the USC and the DXI was similar in most volume conditions. The MUT design, on the other hand, was unable to accommodate high approach volumes and heavy left‐turn traffic. The capacity of the XDL intersection was found to be 99% higher than that of the conventional intersection, whereas the capacity of the USC and the DXI intersections was about 50% higher than that of the conventional intersection. The results of this study can provide guidance on choosing among alternative unconventional designs according to the prevailing traffic conditions at an intersection. Copyright © 2012 John Wiley & Sons, Ltd.