Co-operative control for regenerative braking and friction braking to increase energy recovery without wheel lock

This paper presents a regenerative braking co-operative control algorithm to increase energy recovery without wheel lock. Considering the magnitude of the braking force available between the tire and road surface, the control algorithm was designed for the regenerative braking force at the front wheel and friction braking force at the rear wheel to be increased following the friction coefficient line. The performance of the proposed regenerative braking co-operative control algorithm was evaluated by the hardware in the loop simulation (HILS) with an electronic wedge brake on its front wheels and an electronic mechanical brake on its rear wheels. The HILS results showed that a proper braking force on the front and rear wheels on a low μ road prevented the lock of the front wheels that was connected to the motor, and maintained the regenerative braking and increased energy recovery.     

Vehicle velocity estimation using effective inertia for an in-wheel electric vehicle

In this study, a vehicle velocity estimation algorithm for an in-wheel electric vehicle is proposed. This algorithm estimates the vehicle velocity using the concept of effective inertia, which is based on the motor torque, the angular velocity of each wheel and vehicle acceleration. Effective inertia is a virtual mass that changes according to the state of a vehicle, such as acceleration, deceleration, turning or driving on a low friction road. The performance of the proposed vehicle velocity estimation algorithm was verified in various conditions that included straight driving, circle driving and low friction road driving using the in-wheel electric vehicle that was equipped with an in-wheel system in each of its rear wheels.     

Distributed and self-adaptive vehicle speed estimation in the composite braking case for four-wheel drive hybrid electric car

Considering the controllability and observability of the braking torques of the hub motor, Integrated Starter Generator (ISG), and hydraulic brake for four-wheel drive (4WD) hybrid electric cars, a distributed and self-adaptive vehicle speed estimation algorithm for different braking situations has been proposed by fully utilising the Electronic Stability Program (ESP) sensor signals and multiple powersource signals. Firstly, the simulation platform of a 4WD hybrid electric car was established, which integrates an electronic-hydraulic composited braking system model and its control strategy, a nonlinear seven degrees-of-freedom vehicle dynamics model, and the Burckhardt tyre model. Secondly, combining the braking torque signals with the ESP signals, self-adaptive unscented Kalman sub-filter and main-filter adaptable to the observation noise were, respectively, designed. Thirdly, the fusion rules for the sub-filters and master filter were proposed herein, and the estimation results were compared with the simulated value of a real vehicle speed. Finally, based on the hardware in-the-loop platform and by picking up the regenerative motor torque signals and wheel cylinder pressure signals, the proposed speed estimation algorithm was tested under the case of moderate braking on the highly adhesive road, and the case of Antilock Braking System (ABS) action on the slippery road, as well as the case of ABS action on the icy road. Test results show that the presented vehicle speed estimation algorithm has not only a high precision but also a strong adaptability in the composite braking case.     

分布式驱动电动汽车回馈制动失效的液压补偿控制

分布式驱动电动汽车各驱动轮转速和转矩可以单独精确控制，便于实现整车动力学控制和制动能量回馈，从而提升车辆的主动安全性和行驶经济性。但车辆在回馈制动过程中，一旦1台电机突发故障，其他电机产生的制动力矩将对整车形成附加横摆力矩，从而造成车辆失稳，此时虽可通过截断异侧对应电机制动力矩输出来保证行驶方向，但会使车辆制动力大幅衰减或丧失，同样不利于行车安全。为了解决此问题，提出并验证一种基于电动助力液压制动系统的制动压力补偿控制方法，力图有效保证整车制动安全性。以轮毂电机驱动汽车为例，首先建立了整车动力学模型以及轮毂电机模型，通过仿真验证了回馈制动失效的整车失稳特性以及电机转矩截断控制的不足；然后，建立了电动助力液压制动系统模型，并通过原理样机的台架试验验证了模型的准确性；接着，基于滑模控制算法设计了制动压力补偿控制器，并在单侧电机再生制动失效后的转矩截断控制基础上完成了液压制动补偿控制效果仿真验证；最后，通过实车试验证明了所提控制方法的有效性和实用性。研究结果表明：在分布式驱动电动汽车单侧电机再生制动失效工况下，通过异侧电机转矩截断控制和制动系统的液压主动补偿，能够使车辆快速恢复稳定行驶并满足制动强度需求。     

Experimental investigations on continuous regenerative anti-lock braking system of full electric vehicle

Functions of anti-lock braking for full electric vehicles (EV) with individually controlled wheel drive can be realized through conventional brake system actuating friction brakes and regenerative brake system actuating electric motors. To analyze advantages and limitations of both variants of anti-lock braking systems (ABS), the presented study introduces results of experimental investigations obtained from proving ground tests of all-wheel drive EV. The brake performance is assessed for three different configurations: hydraulic ABS; regenerative ABS only on the front axle; blended hydraulic and regenerative ABS on the front axle and hydraulic ABS on the rear axle. The hydraulic ABS is based on a rule-based controller, and the continuous regenerative ABS uses the gain-scheduled proportional-integral direct slip control with feedforward and feedback control parts. The results of tests on low-friction road surface demonstrated that all the ABS configurations guarantee considerable reduction of the brake distance compared to the vehicle without ABS. In addition, braking manoeuvres with the regenerative ABS are characterized by accurate tracking of the reference wheel slip that results in less oscillatory time profile of the vehicle deceleration and, as consequence, in better driving comfort. The results of the presented experimental investigations can be used in the process of selection of ABS architecture for upcoming generations of full electric vehicles with individual wheel drive.     

Improvement of drivability and fuel economy with a hybrid antiskid braking system in hybrid electric vehicles

When braking on wet roads, Antilock Braking System (ABS) control can be triggered because the available brake torque is not sufficient. When the ABS system is active, for a hybrid electric vehicle, the regenerative brake is switched off to safeguard the normal ABS function. When the ABS control is terminated, it would be favorable to reactivate the regenerative brake. However, recurring cycles from ABS to motor regenerative braking could occur. This condition is felt to be unpleasant by the driver and has adverse effects on driving stability. In this paper, a novel hybrid antiskid braking system using fuzzy logic is proposed for a hybrid electric vehicle that has a regenerative braking system operatively connected to an electric traction motor and a separate hydraulic braking system. This control strategy and the method for coordination between regenerative and hydraulic braking are developed. The motor regenerative braking controller is designed. Control of regenerative and hydraulic braking force distribution is investigated. The simulation and experimental results show that vehicle braking performance and fuel economy can be improved and the proposed control strategy and method are effective and robust.     

A vehicle ABS adaptive sliding-mode control algorithm based on the vehicle velocity estimation and tyre/road friction coefficient estimations

A sliding-mode observer is designed to estimate the vehicle velocity with the measured vehicle acceleration, the wheel speeds and the braking torques. Based on the Burckhardt tyre model, the extended Kalman filter is designed to estimate the parameters of the Burckhardt model with the estimated vehicle velocity, the measured wheel speeds and the vehicle acceleration. According to the estimated parameters of the Burckhardt tyre model, the tyre/road friction coefficients and the optimal slip ratios are calculated. A vehicle adaptive sliding-mode control (SMC) algorithm is presented with the estimated vehicle velocity, the tyre/road friction coefficients and the optimal slip ratios. And the adjustment method of the sliding-mode gain factors is discussed. Based on the adaptive SMC algorithm, a vehicle's antilock braking system (ABS) control system model is built with the Simulink Toolbox. Under the single-road condition as well as the different road conditions, the performance of the vehicle ABS system is simulated with the vehicle velocity observer, the tyre/road friction coefficient estimator and the adaptive SMC algorithm. The results indicate that the estimated errors of the vehicle velocity and the tyre/road friction coefficients are acceptable and the vehicle ABS adaptive SMC algorithm is effective. So the proposed adaptive SMC algorithm can be used to control the vehicle ABS without the information of the vehicle velocity and the road conditions.     

Extended-Kalman-filter-based regenerative and friction blended braking control for electric vehicle equipped with axle motor considering damping and elastic properties of electric powertrain

Because of the damping and elastic properties of an electrified powertrain, the regenerative brake of an electric vehicle (EV) is very different from a conventional friction brake with respect to the system dynamics. The flexibility of an electric drivetrain would have a negative effect on the blended brake control performance. In this study, models of the powertrain system of an electric car equipped with an axle motor are developed. Based on these models, the transfer characteristics of the motor torque in the driveline and its effect on blended braking control performance are analysed. To further enhance a vehicle's brake performance and energy efficiency, blended braking control algorithms with compensation for the powertrain flexibility are proposed using an extended Kalman filter. These algorithms are simulated under normal deceleration braking. The results show that the brake performance and blended braking control accuracy of the vehicle are significantly enhanced by the newly proposed algorithms.     

Wheel slip control with torque blending using linear and nonlinear model predictive control

Modern hybrid electric vehicles employ electric braking to recuperate energy during deceleration. However, currently anti-lock braking system (ABS) functionality is delivered solely by friction brakes. Hence regenerative braking is typically deactivated at a low deceleration threshold in case high slip develops at the wheels and ABS activation is required. If blending of friction and electric braking can be achieved during ABS events, there would be no need to impose conservative thresholds for deactivation of regenerative braking and the recuperation capacity of the vehicle would increase significantly. In addition, electric actuators are typically significantly faster responding and would deliver better control of wheel slip than friction brakes. In this work we present a control strategy for ABS on a fully electric vehicle with each wheel independently driven by an electric machine and friction brake independently applied at each wheel. In particular we develop linear and nonlinear model predictive control strategies for optimal performance and enforcement of critical control and state constraints. The capability for real-time implementation of these controllers is assessed and their performance is validated in high fidelity simulation.     

Vehicle Dynamic Control for In-Wheel Electric Vehicles Via Temperature Consideration of Braking Systems

?Vehicle dynamic control (VDC) systems play an important role with regard to vehicle stability and safety when turning. VDC systems prevent vehicles from spinning or slipping when cornering sharply by controlling vehicle yaw moment, which is generated by braking forces. Thus, it is important to control braking forces depending on the driving conditions of the vehicle. The required yaw moment to stabilize a vehicle is calculated through optimal control and a combination of braking forces used to generate the calculated yaw moment. However, braking forces can change due to frictional coefficients being affected by variations in temperature. This can cause vehicles to experience stability problems due an improper yaw moment being applied to the vehicle. In this paper, a brake temperature estimator based on the finite different method (FDM) was proposed with a friction coefficient estimator in order to solve this problem. The developed braking characteristic estimation model was used to develop a VDC cooperative control algorithm using hydraulic braking and the regenerative braking of an in-wheel motor. Performance simulations of the developed cooperative control algorithm were performed through cosimulation with MATLAB/Simulink and CarSim. From the simulation results, it was verified that vehicle stability was ensured despite any changes in the braking characteristics due to brake temperatures.     

Dynamics characteristics analysis and control of FWID EV

Compared with internal combustion engine (ICE) vehicles, four-wheel-independently-drive electric vehicles (FWID EV) have significant advantages, such as more controlled degree of freedom (DOF), higher energy efficiency and faster torque response of an electric motor. The influence of these advantages and other characteristics on vehicle dynamics control need to be evaluated in detail. This paper firstly analyzed the dynamics characteristics of FWID EV, including the feasible region of vehicle global force, the improvement of powertrain energy efficiency and the time-delays of electric motor torque in the direct yaw moment feedback control system. In this way, the influence of electric motor output power limit, road friction coefficient and the wheel torque response on the stability control, as well as the impact of motor idle loss on the torque distribution method were illustrated clearly. Then a vehicle dynamics control method based on the vehicle stability state was proposed. In normal driving condition, the powertrain energy efficiency can be improved by torque distribution between front and rear wheels. In extreme driving condition, the electric motors combined with the electro-hydraulic braking system were employed as actuators for direct yaw moment control. Simulation results show that dynamics control which take full advantages of the more controlled freedom and the motor torque response characteristics improve the vehicle stability better than the control based on the hydraulic braking system of conventional vehicle. Furthermore, some road tests in a real vehicle were conducted to evaluate the performance of proposed control method.     

Development of an electric booster system using sliding mode control for improved braking performance

Brake systems of the future, including BBW (Brake-by-Wire), are in development in various forms. In one of the proposed hydraulic BBW systems, an electric booster system replaces the pneumatic brake booster with an electric motor and a rotational-to-linear motion mechanism. This system is able to provide improved braking performance by the design of controllers with precise target pressure tracking and control robustness for better system reliability. First, a sliding mode controller is designed using the Lyapunov function approach to secure the robustness of the system against both the model uncertainty and the disturbance caused by the master cylinder and mechanical components. Next, a simulation tool is constructed to validate the electric booster system with the proposed controller. Finally, the electric booster system is implemented into an actual brake ECU and installed in a vehicle for testing under various braking conditions. The experimental results demonstrate that the proposed controller produces faster pressure build-up performance than the conventional brake system, and its tracking performance is sufficient to ensure comfortable braking.     

Nonlinear tire-road friction control based on tire model parameter identification

A hierarchical control structure is a more suitable structural scheme for integrated chassis control. Generally, this type of structure has two main functions. The upper layer manages global control and force allocation, while the bottom layer allocates realized forces with 4 independent local tire controllers. The way to properly allocate these target forces poses a difficult task for the bottom layer. There are two key problems that require attention: obtaining the nonlinear time-varying coefficient of friction between the tire and different road surfaces and accurately tracking the desired forces from the upper layer. This paper mainly focuses on longitudinal tire-road friction allocation and control strategies that are based on the antilock braking system (ABS). Although it is difficult to precisely measure longitudinal tire-road friction forces for frequently changing road surface conditions, they can be estimated with a real-time measurement of brake force and angular acceleration at the wheels. The Magic Formula model is proposed as the reference model, and its key parameters are identified online using a constrained hybrid genetic algorithm to describe the evolution of tire-road friction with respect to the wheel slip. The desired wheel slip, with respect to the reference tire-road friction force from the top layer, is estimated with the inverse quadratic interpolation method. The tire-road friction controller of the extended anti-lock braking system (Ext-ABS) is designed through use of the nonlinear sliding mode control method. Simulation results indicate that acceptable modifications to changes in road surface conditions and adequate stability can be expected from the proposed control strategy.     

Fault-tolerant braking control with integerated EMBs and regenerative in-wheel motors

This paper presents a fault-tolerant brake torque controller for four-wheel-distributed braking systems with in-wheel motors and Electro-Mechanical Brakes (EMB). Mechanical and electrical faults can degrade the performance of the EMB actuators and, thus, their effects need to be compensated in vehicle dynamics level. In this study, the faults are identified as performance degradation and expressed by the gains of each actuator. Assuming the brake force distribution and the regenerative braking ratios, the over-actuated braking system is simplified into a two-input system. A sliding mode controller is designed to track the driver’s braking and steering commands, even if there exist faults in EMBs. In addition, adaptive schemes are constructed to achieve the fault-tolerant control in braking. The proposed controller and strategies are verified in the EMB HILS (Hardware-in-loop-simulation) unit for various conditions.     

Tire–road friction coefficient estimation based on the resonance frequency of in-wheel motor drive system

In this paper, a resonance frequency-based tire–road friction coefficient (TRFC) estimation method is proposed by considering the dynamics performance of the in-wheel motor drive system under small slip ratio conditions. A frequency response function (FRF) is deduced for the drive system that is composed of a dynamic tire model and a simplified motor model. A linear relationship between the squared system resonance frequency and the TFRC is described with the FRF. Furthermore, the resonance frequency is identified by the Auto-Regressive eXogenous model using the information of the motor torque and the wheel speed, and the TRFC is estimated thereafter by a recursive least squares filter with the identified resonance frequency. Finally, the effectiveness of the proposed approach is demonstrated through simulations and experimental tests on different road surfaces.     

制动抱死工况下轮毂电机端盖的可靠性分析

介绍了内转子式轮毂电机与盘式制动器的组合结构,分析了固定制动力分配时制动抱死工况下车轮的最大制动力,确定了轮毂电机关键结构负载,最后采用有限元法分析了轮毂电机端盖的可靠性.     

电动轮驱动电动汽车差速技术研究

提出了电动轮旋转动力学方程和对驱动电机采用转矩指令控制及车轮转速随动的方法,实现电动轮系统的自适应差速。进行了转向行驶、路面不平及不同车轮半径等工况的道路试验,试验结果表明:电动轮汽车在各种工况下都能保持良好的差速性能,具有自适应差速特性。     

A practical identifier design of road variations for anti-lock brake system

Emergency brake technologies have always been a major interest of vehicle active safety-related studies. On homogeneous surfaces, traditional anti-lock brake system (ABS) can achieve efficient braking performance and maintain the handling capability as well. However, when road conditions are time variant during the braking process, or different at the bilateral wheels, braking stability performance is likely to be degraded. To address this problem and enhance ABS performances, a practical identifier of road variations is developed in this study. The proposed identifier adopts a statechart-based approach and is hierarchically constructed with a wheel layer and a full vehicle layer identifier. Based on the identification results, modifications are made to a four-phase wheel-behaviour-based ABS controller to enhance its performance. The feasibility and effectiveness of the proposed identifier in collaborating with the modified ABS controller are examined via simulations and further validated by track tests under various practical braking scenarios.     

Development of the performance simulator for electric scooters with an in-wheel motor

Due to the increasing use of fossil fuel, carbon dioxide emission also increased and environmental problems have emerged as social issues. Accordingly, the research about electric vehicles as personal transportation has been actively performed. An electric scooter is not as complex as an automobile, but it takes a lot of time and costs to design and develop a new vehicle due to trial and error in selecting the specifications of core components according to consumer’s requirements. In this paper, a performance simulator for an electric scooter with an in-wheel motor at the rear wheel was developed and the simulation results were verified through experiments. For a longer travelling distance with the same energy source, the regenerative braking algorithm that converts kinetic energy into electric energy during braking was applied. The usefulness of the regenerative braking control algorithm was verified through various simulation results.     

Transient switching control strategy from regenerative braking to anti-lock braking with a semi-brake-by-wire system

Regenerative braking is an important technology in improving fuel economy of an electric vehicle (EV). However, additional motor braking will change the dynamic characteristics of the vehicle, leading to braking instability, especially when the anti-lock braking system (ABS) is triggered. In this paper, a novel semi-brake-by-wire system, without the use of a pedal simulator and fail-safe device, is proposed. In order to compensate for the hysteretic characteristics of the designed brake system while ensure braking reliability and fuel economy when the ABS is triggered, a novel switching compensation control strategy using sliding mode control is brought forward. The proposed strategy converts the complex coupling braking process into independent control of hydraulic braking and regenerative braking, through which a balance between braking performance, braking reliability, braking safety and fuel economy is achieved. Simulation results show that the proposed strategy is effective and adaptable in different road conditions while the large wheel slip rate is triggered during a regenerative braking course. The research provides a new possibility of low-cost equipment and better control performance for the regenerative braking in the EV and the hybrid EV.