浅谈民和(甘青界)至小峡(平安)公路湿陷性黄土路基的处理措施

道路必须建筑在符合抗压强度指标的地基上,这是道路承载能力是否达到设计标准的基本要求之一。并不是所有地质结构都适合道路建设,其中地质结构复杂的湿陷性黄土地基即为其中一种。结合我省西宁至湟源一级公路、马场垣至平安高速公路建设经验以及我省湿陷性黄土处治经验和科研成果,浅谈我省在建民和至小峡公路在湿陷性黄土地区所采取主要的路基处治措施。     

A Cooperative Intelligent Transport Systems (C‐ITS)‐based lane‐changing advisory for weaving sections

Weaving sections, a common design of motorways, require extensive lane‐change manoeuvres. Numerous studies have found that drivers tend to make their lane changes as soon as they enter the weaving section, as the traffic volume increases. Congestion builds up as a result of this high lane‐changing concentration. Importantly, such congestion also limits the use of existing infrastructure, the weaving section downstream. This behaviour thus affects both safety and operational aspects. The potential tool for managing motorways effectively and efficiently is cooperative intelligent transport systems (C‐ITS). This research investigates a lane‐change distribution advisory application based on C‐ITS for weaving vehicles in weaving sections. The objective of this research is to alleviate the lane‐changing concentration problem by coordinating weaving vehicles to ensure that such lane‐changing activities are evenly distributed over the existing weaving length. This is achieved by sending individual messages to drivers based on their location to advise them when to start their lane change. The research applied a microscopic simulation in aimsun to evaluate the proposed strategy's effectiveness in a one‐sided ramp weave. The proposed strategy was evaluated using different weaving advisory proportions, traffic demands and penetration rates. The evaluation revealed that the proposed lane‐changing advisory has the potential to significantly improve delay. Copyright © 2016 John Wiley & Sons, Ltd.     

Eco-efficiency management program (EEMP)—a model for road fleet operation

Fuel consumption has always been a matter of economic concern in road fleet management, giving rise to many initiatives aimed at fostering more efficient energy use. The increasingly awareness of environmental problems now requires these programs to include environmental aspects. A structured Eco-efficiency Management Program (EEMP) is proposed for road fleet operation, taking into account the traditional approach that strives to minimise fuel consumption as well as wider economic and environmental aspects. The EEMP has its potential evaluated in a case study undertaken for INFRAERO, Brazilian’s airport authority, on the operation of its road fleet supporting aircraft ground operations at Rio de Janeiro International Airport. The paper looks at EEMP’s implementation by identifying the program’s phases, its participants and their competencies, eco-efficiency indicators, and performance targets.     

Field implementation feasibility study of cumulative travel‐time responsive (CTR) traffic signal control algorithm

The cumulative travel‐time responsive (CTR) algorithm determines optimal green split for the next time interval by identifying the maximum cumulative travel time (CTT) estimated under the connected vehicle environment. This paper enhanced the CTR algorithm and evaluated its performance to verify a feasibility of field implementation in a near future. Standard Kalman filter (SKF) and adaptive Kalman filter (AKF) were applied to estimate CTT for each phase in the CTR algorithm. In addition, traffic demand, market penetration rate (MPR), and data availability were considered to evaluate the CTR algorithm's performance. An intersection in the Northern Virginia connected vehicle test bed is selected for a case study and evaluated within vissim and hardware in the loop simulations. As expected, the CTR algorithm's performance depends on MPR because the information collected from connected vehicle is a key enabling factor of the CTR algorithm. However, this paper found that the MPR requirement of the CTR algorithm could be addressed (i) when the data are collected from both connected vehicle and the infrastructure sensors and (ii) when the AKF is adopted. The minimum required MPRs to outperform the actuated traffic signal control were empirically found for each prediction technique (i.e., 30% for the SKF and 20% for the AKF) and data availability. Even without the infrastructure sensors, the CTR algorithm could be implemented at an intersection with high traffic demand and 50–60% MPR. The findings of this study are expected to contribute to the field implementation of the CTR algorithm to improve the traffic network performance. Copyright © 2017 John Wiley & Sons, Ltd.     

The multi‐actor,multi‐criteria analysis methodology (MAMCA) for the evaluation of transport projects: Theory and practice

In this paper the multi‐actor multi‐criteria analysis (MAMCA) method to evaluate transport projects is presented. This evaluation method specifically focuses on the inclusion of qualitative as well as quantitative criteria with their relative importance, defined by the multiple stakeholders, into one comprehensive evaluation process in order to facilitate the decision making process by the different stakeholders. The MAMCA methodology is introduced by an overview of other evaluation methods for transport projects in the past and is illustrated by means of two practical cases. The introduction will lead us to the theoretical conception of the MAMCA method where we draw the attention to the proven usefulness of the MAMCA for the evaluation of transport projects and the inclusion of different kinds of stakeholders, individuals as well as groups, into the evaluation process.     

An agent‐based simulation model to assess the impacts of introducing a shared‐taxi system: an application to Lisbon (Portugal)

This paper presents a new concept of urban shared‐taxi services. The proposed system has a new organisational design and pricing scheme that aims to use the capacity in traditional taxi services in a more efficient way. In this system, a taxi acting in ‘sharing’ mode offers lower prices to its clients, in exchange for them to accept sharing the vehicle with other persons who have compatible trips (time and space). The paper proposes and tests an agent‐based simulation model in which a set of rules for space and time matching between a request of a client and the candidate shared taxis is identified. It considers that the client is only willing to accept a maximum deviation from his or her direct route and establishes an objective function for selecting the best candidate taxi. The function considers the minimum travel time combination of pickup and drop‐off of all the pool of clients sharing each taxi while allowing to establish a policy of bonuses to competing taxis with certain number of occupants. An experiment for the city of Lisbon is presented with the objectives of testing the proposed simulation conceptual model and showing the potential of sharing taxis for improving mobility management in urban areas. Results show that the proposed system may lead to significant fare and travel time savings to passengers, while not jeopardising that much the taxi revenues. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparative life-cycle assessment of conventional (double lane) and non-conventional (turbo and flower) roundabout intersections

This research studied and compared different construction techniques for the road subgrade, embankment and pavement of different types of roundabout intersections in order to assess their environmental sustainability. A Life Cycle Assessment (LCA) was carried out on double lane, turbo- and flower roundabouts.We considered virgin materials and reclaimed asphalt pavement (RAP) for the pavement construction. Also the environmental effects due to in situ lime stabilization of fine-grained soils were assessed in order to reduce the use of virgin material in road subgrades.The use of reclaimed asphalt pavement (RAP) can lead to a significant reduction in pollutant emissions and energy consumption (especially due to the lesser material transport) – though with a slightly different impact according to the different percentages employed – compared to the pavements constructed with virgin materials. The same consideration can be made for fine soils with in situ lime stabilization: on the one hand, the technique allows to improve significantly the mechanical properties of soils which would be otherwise dumped and, on the other, to provide considerable environmental benefits. The life cycle assessment of the pavement was carried out with the help of the PaLATE software (by comparing different maintenance scenarios) while emissions and energy consumption in the use phase at intersections were evaluated by means of closed-form models (to estimate vehicle delays and speeds of vehicles) and the COPERT software.Finally, the generalized costs covered in the whole life cycle of roundabouts (i.e. sum of construction, maintenance and environmental costs) were assessed and associated to the different construction options.     

首届美国供应链管理协会中国年会召开全球顶尖物流专家及企业领袖汇聚深圳

本刊讯(记者林火妹发自深圳)6月10日,为期三天的首届中国(深圳)供应链管理国际论坛暨2005美国供应链管理专业协会(简称CSCMP)中国年会在深圳圆满落幕.本届大会由CSCMP、深圳市政府以及中国综合开发研究院共同举办,有近300名国内外著名物流界学者及企业领袖会聚深圳五洲宾馆,热烈探讨供应链最新发展趋势以及中国物流业的机遇与挑战问题.     

长大深埋隧道(连载三)

因工程的复杂性、地质条件的不确定性以及施工运营安全的严苛性,长大深埋隧道工程在规划、设计、施工、运营等方面面临诸多技术挑战。文章针对地质勘察、隧道系统方案选择、设计方案、开挖方法和支护系统、施工及运营安全、风险管理等方面提出了具体的建议,可为隧道工程技术人员提供借鉴、指导。     

长大深埋隧道(连载一)

因工程的复杂性、地质条件的不确定性及施工运营安全的严苛性,长大深埋隧道工程在规划、设计、施工、运营等方面面临诸多技术挑战。文章针对地质勘察、隧道系统方案选择、设计方案、开挖方法和支护系统、施工及运营安全、风险管理等方面提出了具体的建议,可为隧道工程技术人员提供借鉴、指导。     

长大深埋隧道(连载二)

因工程的复杂性、地质条件的不确定性以及施工运营安全的严苛性,长大深埋隧道工程在规划、设计、施工、运营等方面面临诸多技术挑战。文章针对地质勘察、隧道系统方案选择、设计方案、开挖方法和支护系统、施工及运营安全、风险管理等方面提出了具体的建议,可为隧道工程技术人员提供借鉴、指导。     

Designing personal rapid transit (PRT) networks

This paper presents a heuristic method for designing a PRT network. Because the PRT system operating characteristics and performance measures differ widely from those of conventional transit technologies, an algorithm for the PRT network design problem (NDP) is derived by using concepts from some current NDP algorithms. We minimize the sum of passenger travel time cost, construction cost, vehicle cost and operational costs, subject to an available budget of guideway, a maximum number of vehicles and given link capacities. Starting with a well-connected initial network, the algorithm eliminates and adds links iteratively as it searches for a near-optimal solution. If this solution satisfies the budget constraint, it is considered to be acceptable. Otherwise, additional links are deleted until a feasible near-optimal solution is obtained. The link elimination phase of the algorithm only considers half of the links at a time which greatly decreases computing time. None of the links in an acceptable solution will be overloaded.     

Investigating preference heterogeneity in Value of Time (VOT) and Value of Reliability (VOR) estimation for managed lanes

This paper presents an empirical study in investigating user heterogeneity of Value of Time (VOT) and Value of Reliability (VOR). Combined Revealed Preference (RP) and Stated Preference (SP) data were used to understand traveler choice behavior regarding the usage of managed lanes (MLs). The data were obtained from the South Florida Expressway Stated Preference Survey, which focused on automobile drivers who had traveled on the I-75, I-95, or SR 826 corridors in South Florida. Mixed logit modeling was applied and indicated an average value of $13.55 per hour for VOT and $16.13 per hour for VOR. Potential sources of heterogeneity in user sensitivities to time, reliability, and cost were identified and quantified by adding interaction effects of the variables in the mixed logit model. The findings indicated that various socioeconomic demographic characteristics and trip attributes contributed to the variations in VOT and VOR at different magnitudes. The results of this study contribute to a better understanding on what attributes lead to higher or lower VOT and VOR and to what extent. These findings can be incorporated into the demand forecasting process and lead to better estimates and enhanced analytical capabilities in various applications, such as toll feasibility studies, pricing strategy and policy evaluations, and impact analysis.     

盘形滚刀的使用与研究(3)--TB880E型掘进机在秦岭隧道施工中的应用

5盘形滚刀在TBM施工中的合理使用 技术性能优良的刀具为TBM施工提供了良好的基础,但刀具的性能只有通过正确使用才能得到充分发挥.     

TBM及其在中国的应用(1)

1前言 这篇报告援引了许多与中国未来工程有关的大型地下工程和特长深埋隧道工程实例.这些工程只有通过运用精湛的隧道施工技术(尤其是高度机械化的TBM)、特别的管理以及认识到采用这些方法所产生的能力的提高和费效比的增加才可能达到成功.这并不意味着毫无问题,而是因为在运用这些创新技术中所遇到的困难被相关部门顽强地克服了.