Does tourism degrade environmental quality? A comparative study of Eastern and Western European Union

The purpose of this paper is to investigate the effect of tourism on economic growth and carbon dioxide emissions in Eastern and Western European Union (EU) countries by incorporating FDI and trade in the production and CO₂ emission functions. We apply panel econometric techniques which account for cross-sectional dependence and heterogeneity. The results of Westerlund panel cointegration test confirm a long-run equilibrium relationship among the variables. Results from long-run elasticities suggest that tourism stimulates economic growth in Eastern and Western EU countries. However, tourism increases CO₂ emissions in Eastern EU but decreases in Western EU. This indicates that tourism has an adverse effect on the environment in Eastern EU. Finally, short-run heterogeneous panel causality test results suggest that tourism causes CO₂ emissions in Eastern EU while economic growth and CO₂ emissions cause tourism in Western EU. Overall, our findings suggest that tourism plays an important role in accelerating economic growth; however, its role on CO₂ emissions largely depends on the adaptation of sustainable tourism policies and efficient management.     

Structural factors affecting land-transport CO2 emissions: A European comparison

The increase of CO₂ emissions generated by land-transport is a major policy concern of the European Union but the upward trend in transport use makes it difficult for member states to comply with Kyoto Protocol targets. This paper develops an input–output methodology to analyse the structure of CO₂ emissions from land-transport and applies this to several European Union countries. It shows how production linkages between sectors and the structure of final demand affect land-transport emissions in these countries. The paper confirms the relevance of the emissions-intensity factor to explain differences in the emissions of the transport sector across countries, but also shows the importance of technology-production linkages between sectors in an economic system that has usually been neglected in the past.     

Combining technology development and behaviour change to meet CO2 cumulative emission budgets for road transport: Case studies for the USA and Europe

Global temperature rise over the long term will be proportional to the total amount of CO₂ emitted. Any given probability of exceeding a targeted maximum temperature rise implies a maximum limit on the cumulative total of CO₂ that can be emitted: a CO₂ “budget”. This paper describes an approach to modelling cumulative emissions from light and heavy duty road transport from the present to 2050, focussing on the USA and Europe, and comparing the potential impacts of a range of technological and behaviourally-based abatement measures with such cumulative emissions budgets.The model shows that abatement measures would have a lower effect on cumulative emissions from 2000 to 2050 than on annual emissions in 2050, so that focussing only on annual emissions could be misleading. It shows that technological developments would be insufficient on their own to enable Europe and the USA to meet CO₂ budgets for road transport. Behavioural changes, which potentially can be implemented much sooner, would be essential too. There is potential to keep European light duty emissions very close to CO₂ budgets, and US light duty emissions not far above the least restrictive budget, but the model predicts that heavy duty emissions in both regions are likely to exceed their CO₂ budgets. Deeper emissions reductions in other regions and sectors will be needed to compensate for this. Timing would be critical: for the greatest impact, behaviour change policies and interventions would need to be applied early and deeply.     

CO2 emissions efficiency and marginal abatement costs of the regional transportation sectors in China

Nowadays, evaluating CO₂ emissions efficiency and its marginal abatement cost in transportation sectors has been a hot topic. However, while evaluating the CO₂ marginal abatement cost using data envelopment analysis approach, the weak disposability of CO₂ may imply positive abatement cost, which undoubtedly violates our common sense. To obtain non-positive marginal abatement cost, CO₂ emissions should be treated as an input. To reconcile this contradiction, this paper intends to propose a global, directional distance function model based on previous study to investigate the productivity, economic efficiency, CO₂ emissions efficiency, and marginal abatement cost of the China’s regional transportation sectors during 2007–2012. The results show that: (1) the productivity, economic efficiency and CO₂ emissions efficiency of different regions differ widely. More specifically, the coastal areas of south China perform better than the other areas in terms of productivity, economic efficiency, and CO₂ emissions efficiency. (2) Generally, the economic efficiency is greater than CO₂ emissions efficiency, which is relatively low in most areas. (3) A negative correlation is found between CO₂ emissions efficiency and its marginal abatement cost. For a 1% increase in CO₂ emissions efficiency, the CO₂ marginal abatement cost declines by 102 Yuan (in 2004 constant price). The results imply that improving CO₂ emissions efficiency plays an important role in marginal abatement cost reduction, and it also provides us a new approach to reduce abatement cost besides the technical progress.     

Assessing carbon footprint and energy efficiency in competing supply chains: Review - Case studies and benchmarking

This article compares the energy consumption and CO₂ emissions of supply chains in Belgium, France and UK looking in particular at, jeans, yogurts, apples, tomatoes and furniture. We use a generic methodology that allows comparability across the supply chain of products, supply chains, and countries. Our benchmarking show relatively high emissions for maritime transport and the consumer leg, while logistics activities such as storage and road freight exhibit relatively low emissions. The influences of distance, retail type, area density and consumer behaviour are also examined.     

Development of a corrected average speed model for calculating carbon dioxide emissions per link unit on urban roads

The purpose of our study is to develop a “corrected average emission model,” i.e., an improved average speed model that accurately calculates CO₂ emissions on the road. When emissions from the central roads of a city are calculated, the existing average speed model only reflects the driving behavior of a vehicle that accelerates and decelerates due to signals and traffic. Therefore, we verified the accuracy of the average speed model, analyzed the causes of errors based on the instantaneous model utilizing second-by-second data from driving in a city center, and then developed a corrected model that can improve the accuracy. We collected GPS data from probe vehicles, and calculated and analyzed the average emissions and instantaneous emissions per link unit. Our results showed that the average speed model underestimated CO₂ emissions with an increase in acceleration and idle time for a speed range of 20 km/h and below, which is the speed range for traffic congestion. Based on these results, we analyzed the relationship between average emissions and instantaneous emissions according to the average speed per link unit, and we developed a model that performed better with an improved accuracy of calculated CO₂ emissions for 20 km/h and below.     

Economic-environmental analysis of traffic-calming devices

A set of indicators are proposed to determine the effect of traffic-calming devices on the environment and economy. They are based on vehicular emissions and energy consumption and are used to evaluate the viability and positioning of traffic-calming devices. First, a time window is defined on which the influence of a traffic-calming device can be determined providing a convenient frame of reference. Second, a concept of local cruising conditions is defined in order to have a basis of comparison between cases “with” and “without” traffic calming devices. The emissions considered were: HC, NOx, CO, PM₁₀, and CO₂. From the latter fuel consumption was estimated. Valuation of speed bumps on a secondary road in Mexico City was obtained as an example application of the proposed methodology.     

Energy use and emissions of two stroke-powered tricycles in Metro Manila

CO, CO₂, NO_x and HC emissions of two stroke-powered tricycles in Metro Manila are examined using an instantaneous emissions model. Results show that fuel consumption and HC emissions in middle class residential areas and main roads are similar but lower than levels in low income residential areas. On the average, tricycles in Metro Manila consume 24.41 km/l of fuel and produces 9.5, 9.7, 40.5 and 0.07 g/km of HC, CO, CO₂ and NO_x, respectively. They fail to satisfy HC, CO and NO_x emission limits set by reference standards in the Philippines and other Asian countries. They produce greater HC and CO emissions than gasoline fueled private cars and diesel powered public jeepneys, taxis and buses on a per passenger-km basis but significantly lower NO_x emissions. Tricycles account for 15.4% of the total HC emissions from mobile sources in the metropolis while their contributions to CO, CO₂ and NO_x are minimal.     

Policy packages for modal shift and CO2 reduction in Lille,France

This paper proposes different policy scenarios to cut CO₂ emissions caused by the urban mobility of passengers. More precisely, we compare the effects of the ‘direct tool’ of carbon tax, to a combination of ‘indirect tools’ – not originally aimed at reducing CO₂ (i.e. congestion charging, parking charges and a reduction in public transport travel time) in terms of CO₂ impacts through a change in the modal split. In our model, modal choices depend on individual characteristics, trip features (including the effects of policy tools), and land use at origin and destination zones. Personal “CO₂ emissions budgets” resulting from the trips observed in the metropolitan area of Lille (France) in 2006 are calculated and compared to the situation related to the different policy scenarios. We find that an increase of 50% in parking charges combined with a cordon toll of €1.20 and a 10% travel time decrease in public transport services (made after recycling toll-revenues) is the winning scenario. The combined effects of all the policy scenarios are superior to their separate effects.     

VISSIM/MOVES integration to investigate the effect of major key parameters on CO2 emissions

This paper looks at CO₂ emissions on limited access highways in a microscopic and stochastic environment using an optimal design approach. Estimating vehicle emissions based on second-by-second vehicle operation allows the integration of a microscopic traffic simulation model with the latest US Environmental Protection Agency’s mobile source emissions model to improve accuracy. A factorial experiment on a test bed prototype of the I-4 urban limited access highway corridor located in Orlando, Florida was conducted to identify the optimal settings for CO₂ emissions reduction and to develop a microscopic transportation emission prediction model. An exponentially decaying function towards a limiting value expressed in the freeway capacity is found to correlate with CO₂ emission rates. Moreover, speeds between 55 and 60 mph show emission rate reduction effect while maintaining up to 90% of the freeway’s capacity. The results show that speed has a significant impact on CO₂ emissions when detailed and microscopic analysis of vehicle operations of acceleration and deceleration are considered.     

Examining the effects of the built environment and residential self-selection on commuting trips and the related CO2 emissions: An empirical study in Guangzhou,China

Numerous studies have established the link between the built environment and travel behavior. However, fewer studies have focused on environmental costs of travel (such as CO₂ emissions) with respect to residential self-selection. Combined with the application of TIQS (Travel Intelligent Query System), this study develops a structural equations model (SEM) to examine the effects of the built environment and residential self-selection on commuting trips and their related CO₂ emissions using data from 2015 in Guangzhou, China. The results demonstrate that the effect of residential self-selection also exists in Chinese cities, influencing residents’ choice of living environments and ultimately affecting their commute trip CO₂ emissions. After controlling for the effect of residential self-selection, built environment variables still have significant effects on CO₂ emissions from commuting although some are indirect effects that work through mediating variables (car ownership and commuting trip distance). Specifically, CO₂ emissions are negatively affected by land-use mix, residential density, metro station density and road network density. Conversely, bus stop density, distance to city centers and parking availability near the workplace have positive effects on CO₂ emissions. To promote low carbon travel, intervention on the built environment would be effective and necessary.     

How to best address aviation’s full climate impact from an economic policy point of view? – Main results from AviClim research project

The interdisciplinary research project AviClim (Including Aviation in International Protocols for Climate Protection) has explored the feasibility for including aviation’s full climate impact, i.e., both long-lived CO₂ and short-lived non-CO₂ effects, in international protocols for climate protection and has investigated the economic impacts. Short-lived non-CO₂ effects of aviation are NO_x emissions, H₂O emissions or contrail cirrus, for instance.Four geopolitical scenarios have been designed which differ concerning the level of international support for climate protecting measures. These scenarios have been combined alternatively with an emissions trading scheme on CO₂ and non-CO₂ species, a climate tax and a NO_x emission charge combined with CO₂ trading and operational measures (such as lower flight altitudes). Modelling results indicate that a global emissions trading scheme for both CO₂ and non-CO₂ emissions would be the best solution from an economic and environmental point of view. Costs and impacts on competition could be kept at a relatively moderate level and effects on employment are moderate, too. At the same time, environmental benefits are noticeable.     

Estimation of cost and CO2 emissions with a sustainable cross-border supply chain in the automobile industry: A case study of Thailand and neighboring countries

CO₂ emissions are increasing because of the growth in the cross-border supply chain, which is leading the locations of assembly plants and suppliers to spread across a wider area. Given that one passenger vehicle needs more than 20,000 components and parts, the automobile industry exploits the cross-border supply chain. Recently, the free cross-border movement of people, goods, capital, and information has accelerated in Asia. Therefore, a sustainable cross-border supply chain is required to reduce both CO₂ emissions and cost. This study estimates total CO₂ emissions per vehicle including production and transportation processes in Thailand and neighboring countries and the change in CO₂ emissions based on future policy scenarios that consider the automobile market and locational conditions in 2030. The results show that locating production close to the place of consumption and the electricity emissions factors in each country should be considered.     

Estimating changes in transport CO2 emissions due to changes in weather and climate in Sweden

There is a considerable body of studies on the relationship between daily transport activities and CO₂ emissions. However, how these emissions vary in different weather conditions within and between the seasons of the year is largely unknown. Because individual activity–travel patterns are not static but vary in different weather conditions, it is immensely important to understand how CO₂ emissions vary due to the change of weather. Using Swedish National Travel Survey data, with emission factors calculated through the European emission factor model ARTEMIS, this study is a first attempt to derive the amount of CO₂ emission changes subject to the change of weather conditions. A series of econometric models was used to model travel behaviour variables that are crucial for influencing individual CO₂ emissions. The marginal effects of weather variables on travel behaviour variables were derived. The results show an increase of individual CO₂ emissions in a warmer climate and in more extreme temperature conditions, whereas increasing precipitation amounts and snow depths show limited effects on individual CO₂ emissions. It is worth noting that the change in CO₂ emissions in the scenario of a warmer climate and a more extreme temperature tends to be greater than the sum of changes in CO₂ emissions in each individual scenario. Given that a warmer climate and more extreme weather could co-occur more frequently in the future, this result suggests even greater individual CO₂ emissions than expected in such a future climate.     

Examining transport futures with scenario analysis and MCA

Climate change is a global problem and across the world the transport sector is finding it difficult to break projected increases in carbon dioxide (CO₂) emissions; there are very few contexts where deep reductions in transport CO₂ emissions are being made. A number of research studies are now examining the potential for future lower CO₂ emissions in the transport sector. This paper develops this work to consider some of the wider sustainability impacts (economic, social and local environmental) as well as the lower CO₂ transport impacts of different policy trajectories. Hence the central argument made is for an integrated approach to transport policy making over the longer term - incorporating scenario analysis and multi-criteria assessment (MCA) - to help assess likely progress against a range of objectives.The analysis is based on work carried out in Oxfordshire, UK. Different packages of measures are selected and two scenarios developed which satisfy lower CO₂ aspirations, one of which also provides wider positive sustainability impacts. A simulation model has been produced to help explore the strategic policy choices and tensions evident for decision-makers involved in local transport planning. The paper argues for a ‘strategic conversation’ (Van der Heijden, 1996) at the sub-regional and city level, based upon future scenario analysis and MCA, discussing the priorities for intervention. Such an approach will help us examine the scale of change and trade-offs required in moving towards sustainable transport futures.     

Modeling the impacts of alternative emission trading schemes on international shipping

Various market-based measures have been proposed to reduce CO₂ emissions from international shipping. One promising mechanism under consideration is the Emission Trading Scheme (ETS). This study analyzes and benchmarks the economic implications of two alternative ETS mechanisms, namely, an open ETS compared to a Maritime only ETS (METS). The analytical solutions and model calibration results allow us to quantify the impacts of alternative ETS schemes on the container shipping sector and the dry bulk shipping sector. It is found that an ETS, whether open or maritime only, will decrease shipping speed, carrier outputs and fuel consumption for both the container and dry bulk sectors, even in the presence of a “wind-fall” profit to shipping companies. Under an open ETS, the dry bulk sector will suffer from a higher proportional reduction in output than the container sector, and will thus sell more emission permits or purchase fewer permits. Under an METS, container carriers will buy emission permits from the dry bulk side. In addition, under an METS the degree of competition within one sector will have spill-over effects on the other sector. Specifically, when the sector that sells (buys) permits is more collusive (competitive), the equilibrium permit price will rise. This study provides a framework for identifying the moderating effects of market structure and competition between firms on emission reduction schemes, and emphasizes the importance of understanding the differential impacts of ETS schemes on individual sectors within an industry when considering alternative policies.     

The effects of small roundabouts on emissions and fuel consumption: a case study

The effects of small roundabouts on emissions and fuel consumption were evaluated using the “car-following” method in a before/after study. The results showed that at a roundabout replacing a signalised junction, CO emissions decreased by 29%, NO_x emissions by 21% and fuel consumption by 28%. At roundabouts, replacing yield regulated junctions, CO emissions increased on average by 4%, NO_x emissions by 6% and fuel consumption by 3%. The results indicate that the large reductions in emissions and fuel consumption at one rebuilt signalised junction can “compensate for” the increase produced by several yield-regulated junctions rebuilt as roundabouts.     

Should BEVs be subsidized or taxed? A European perspective based on the economic value of CO2 emissions

Battery Electric vehicles (BEVs) are generally considered as potentially contributing to the reduction of CO₂ emissions. Consequently, many countries have promoted (or are in the process of promoting) policies aimed at directly or indirectly subsidizing BEVs to accelerate their market uptake. The aim of this paper is to assess whether BEVs’ subsidies are justified (and by what amount) with reference to the carbon component, distinguishing by car segments and countries. To address these research questions, a simulation model is developed, based on the most recent and reliable data available. The model estimates and monetizes the Well-to-Wheel CO₂ emissions of six car segments in 28 European countries. The monetary value of the difference of the CO₂ emissions between the non-BEVs and the BEVs ranges from −€1133 (tax) to +€3192 (subsidy), depending on the car segment and on the nation considered. These results are then compared to the policies about alternative fuels adopted by the single EU countries, suggesting in some cases the necessity to rethink such incentives.     

Impact of horizontal geometric design of two-lane rural roads on vehicle co2 emissions

In 2014, highway vehicles accounted for 72.8% of all Greenhouse Gases emissions from transportation in Europe. In the United States (US), emissions follow a similar trend. Although many initiatives try to mitigate emissions by focusing on traffic operations, little is known about the relationship between emissions and road design. It is feasible that some designs may increase average flow speed and reduce accelerations, consequently minimizing emissions.This study aims to evaluate the impact of road horizontal alignment on CO₂ emissions produced by passenger cars using a new methodology based on naturalistic data collection. Individual continuous speed profiles were collected from actual drivers along eleven two-lane rural road sections that were divided into 29 homogeneous road segments. The CO₂ emission rate for each homogeneous road segment was estimated as the average of CO₂ emission rates of all vehicles driving, estimated by applying the VT-Micro model.The analysis concluded that CO₂ emission rates increase with the Curvature Change Rate. Smooth road segments normally allowed drivers to reach higher speeds and maintain them with fewer accelerations. Additionally, smother segments required less time to cover the same distance, so emissions per length were lower. It was also observed that low mean speeds produce high CO₂ emission rates and they increase even more on roads with high speed dispersions.Based on this data, several regression models were calibrated for different vehicle types to estimate CO₂ emissions on a specific road segment. These results could be used to incorporate sustainability principles to highway geometric design.     

Prediction of vehicle CO2 emission and its application to eco-routing navigation

Transportation sector accounts for a large proportion of global greenhouse gas and toxic pollutant emissions. Even though alternative fuel vehicles such as all-electric vehicles will be the best solution in the future, mitigating emissions by existing gasoline vehicles is an alternative countermeasure in the near term. The aim of this study is to predict the vehicle CO₂ emission per kilometer and determine an eco-friendly path that results in minimum CO₂ emissions while satisfying travel time budget. The vehicle CO₂ emission model is derived based on the theory of vehicle dynamics. Particularly, the difficult-to-measure variables are substituted by parameters to be estimated. The model parameters can be estimated by using the current probe vehicle systems. An eco-routing approach combining the weighting method and k-shortest path algorithm is developed to find the optimal path along the Pareto frontier. The vehicle CO₂ emission model and eco-routing approach are validated in a large-scale transportation network in Toyota city, Japan. The relative importance analysis indicates that the average speed has the largest impact on vehicle CO₂ emission. Specifically, the benefit trade-off between CO₂ emission reduction and the travel time buffer is discussed by carrying out sensitivity analysis in a network-wide scale. It is found that the average reduction in CO₂ emissions achieved by the eco-friendly path reaches a maximum of around 11% when the travel time buffer is set to around 10%.