Monitoring wildlife crossing structures along highways in Changbai Mountain,China

In China, the construction and monitoring of wildlife crossing structures is uncommon. Mountainous area occupies two-thirds area of China. A lot of tunnels (similar to overpasses in developed countries), bridges, and culverts (similar to underpasses) are constructed along highways. In general, these structures are multifunctional, including wildlife migration. However, studies on monitoring these potential crossing structures are almost vacant. Taking two highways in Changbai Mountain area as case studies, infra-red camera trapping and snow tracking were used to investigate the efficiency of tunnels, bridges and culverts on the highways. A total of 13 medium and large-sized wildlife species crossed highway through tunnels, bridges and culverts. One third of species were Chinese national protective species, and almost all species were present within 500 m from Ring Changbai Mountain Scenic highway used bridges and culverts to cross this highway. The tunnel along the expressway (length = 1000 m) and the bridges along the highway (width > 8 m) have been important passages for ungulates, Eurasian red squirrels (Sciurus vulgaris), yellow throated martens (Martes flavigula) and sables (Martes zibellina). Different species preferred to different types of structures, although most species preferred to bridges and tunnels. We suggest that short fences should be set around the bridges and culverts to guide animals to cross the passages, especially for ungulates. Monitoring programs of uses of crossing structures by wildlife should be conducted for at least 2 months to catch most species activity.     

AERMOD for near-road pollutant dispersion: Evaluation of model performance with different emission source representations and low wind options

The performance of the regulatory dispersion model AERMOD in simulating vehicle-emitted pollutant concentrations near-roadway using area or volume source representation of emissions and with different low wind options was assessed using the SF₆ tracer data from the General Motors (GM) Sulfur Dispersion Experiment. At downwind receptor locations, AERMOD, using either area or volume source emissions, can reasonably predict the tracer concentrations near the surface (0.5 m) but the model performance decreases at higher elevations (3.5m and 9.5m above the surface). For upwind receptors, using an area source representation leads to significant under-predictions due to AERMOD’s lack of treatment of lateral plume meander, but using volume source representation leads to over-predictions of upwind concentrations regardless of the low wind options for plume meander. Among the three low wind options currently available in AERMOD, best model performance is obtained with low wind option 3, which treats plume meander with a higher minimal standard deviation of the horizontal crosswind component (σ_v,min = 0.3 m s⁻¹), eliminates upwind component of dispersion and uses an effective lateral dispersion parameter (σ_y) to replicate centerline concentration. The optional adjustment of the surface friction velocity in the meteorological preprocessor AERMET does not lead to obvious improvements in predicted near-road concentrations for this application.     

A forecast air pollution model applied to a hypothetical urban road pricing scheme: An empirical study in Madrid

Reducing the air pollution from increases in traffic congestion in large cities and their surroundings is an important problem that requires changes in travel behavior. Road pricing is an effective tool for reducing air pollution, as reflected currently urban road pricing outcomes (Singapore, London, Stockholm and Milan). A survey was conducted based on establishing a hypothetical urban road pricing system in Madrid (a random sample size n = 1298). We developed a forecast air pollution model with time series analysis to evaluate the consequences of possible air pollution decreases in Madrid. Results reveal that the hypothetical road pricing for Madrid could have highly significant effects on decreasing air pollution outside of the city and in the inner city during the peak operating time periods of maximum congestion (morning peak hours from 7:00 to 10:00 and evening peak hours from 18:00 to 20:00). Furthermore, this system could have significant positive effects on a shift toward using public transport and non-motorized modes inside the hypothetical toll zone. This reveals that the system has a high capacity to motivate a decrease in air pollution and impose more sustainable behavior for public transport users.     

Influence of driving patterns on vehicle emissions: A case study for Latin American cities

On-board real-time emission experiments were conducted on 78 light-duty vehicles in Bogota. Direct emissions of carbon monoxide (CO), carbon dioxide (CO₂), nitrogen oxides (NO_x) and hydrocarbons (HC) were measured. The relationship between such emissions and vehicle specific power (VSP) was established. The experimental matrix included both gasoline-powered and retrofit dual fuel (gasoline–natural gas) vehicles. The results confirm that VSP is an appropriate metric to obtain correlations between driving patterns and air pollutant emissions. Ninety-five percent of the time vehicles in Bogota operate in a VSP between −15.2 and 17.7 kW ton⁻¹, and 50% of the time they operate between −2.9 and 1.2 kW ton⁻¹, representing low engine-load and near-idling conditions, respectively. When engines are subjected to higher loads, pollutant emissions increase significantly. This demonstrates the relevance of reviewing smog check programs and command-and-control measures in Latin America, which are widely based on static (i.e., idling) emissions testing. The effect of different driving patterns on the city’s emissions inventory was determined using VSP and numerical simulations. For example, improving vehicle flow and reducing sudden and frequent accelerations could curb annual emissions in Bogota by up to 12% for CO₂, 13% for CO and HC, and 24% for NO_x. This also represents possible fuel consumption savings of between 35 and 85 million gallons per year and total potential economic benefits of up to 1400 million dollars per year.     

The impact of road grade on carbon dioxide (CO2) emission of a passenger vehicle in real-world driving

To accurately estimate real-world vehicle emission at 1 Hz the road grade for each second of data must be quantified. Failure to incorporate road grade can result in over or underestimation of a vehicle’s power output and hence cause inaccuracy in the instantaneous emission estimate. This study proposes a simple LiDAR (Light Detection And Ranging) – GIS (Geographic Information System) road grade estimation methodology, using GIS software to interpolate the elevation for each second of data from a Digital Terrain Map (DTM). On-road carbon dioxide (CO₂) emissions from a passenger car were recorded by Portable Emission Measurement System (PEMS) over 48 test laps through an urban-traffic network. The test lap was divided into 8 sections for micro-scale analysis. The PHEM instantaneous emission model (Hausberger, 2003) was employed to estimate the total CO₂ emission through each lap and section. The addition of the LiDAR-GIS road grade to the PHEM modelling improved the accuracy of the CO₂ emission predictions. The average PHEM estimate (with road grade) of the PEMS measured section total CO₂ emission (n = 288) was 93%, with 90% of the PHEM estimates between 80% and 110% of the PEMS recorded value. The research suggests that instantaneous emission modelling with LiDAR-GIS calculated road grade is a viable method for generating accurate real-world micro-scale CO₂ emission estimates. The sensitivity of the CO₂ emission predictions to road grade was also tested by lessening and exaggerating the gradient profiles, and demonstrates that assuming a flat profile could cause considerable error in real-world CO₂ emission estimation.     

Capitalization of BRT network expansions effects into prices of non-expansion areas

A before and after hedonic model is used to determine the property value impacts on properties already served by the transit system caused by extensions to Bogotá’s bus rapid transit system. Asking prices of residential properties belonging to an intervention area (N = 1407 before, 1570 after) or a control area (N = 267 before, 732 after) and offered for sale between 2001 and 2006 are used to determine capitalization of the enhanced regional access provided by the extension. Properties offered during the year the extension was inaugurated and in subsequent years have asking prices that are between 13% and 14% higher than prices for properties in the control area, after adjusting for structural, neighborhood and regional accessibility characteristics of each property. Furthermore, the appreciation is similar for properties within 500 m and properties between 500 m and 1 km of the BRT.     

The cumulative effect of nuisances from road transportation in residential sectors on the Island of Montreal – Identification of the most exposed groups and areas

Air pollution and road traffic noise are considered to be the two most important nuisances that could negatively affect the quality of life. A prolonged exposure to high concentrations of these pollutants could conduct to various health problems. Studies in environmental equity have often considered these nuisances individually whenever it comes from the same source. The main objective of this paper is to determine if the 15 years of age, those aged 65 and over, visible minorities and low income individuals located in a portion of the Island of Montreal are overrepresented in city blocks characterized by having among the highest levels of transportation-related air pollutants (i.e., ambient concentrations of NO₂ and road traffic noise in decibels (dB(A)). The results show that low-income individuals and, to a lesser extent, visible minorities, are significantly overrepresented in city blocks characterized by the higher levels of NO₂ and road traffic noise in dB(A). Multinomial logistic regression analysis confirms these results, and also shows that young people under 15 years are under-represented in the most polluted areas. However, contrary to the previous bivariate results, people aged 65 and over are negatively and significantly associated with the likelihood of their living in a city block located in an advantaged area after controlling for the independent effects of the other explanatory variables. Moreover, visible minorities are significantly overrepresented in advantaged areas. Considering the observed results, some solutions are identified to reduce road traffic noise and air pollution in the city blocks localized near major traffic arteries.     

Commuters’ exposure to PM2.5 and CO2 in metro carriages of Shanghai metro system

Air quality inside transportation carriages has become a public concern. A comprehensive measurement campaign was conducted to examine the commuters’ exposure to PM_2.5 (d_p ⩽ 2.5 μm) and CO₂ in Shanghai metro system under different conditions. The PM_2.5 and CO₂ concentrations inside all the measured metro lines were observed at 84 ± 42 μg/m³ and 1253.1 ± 449.1 ppm, respectively. The factors that determine the in-carriage PM_2.5 and CO₂ concentrations were quantitatively investigated. The metro in-carriage PM_2.5 concentrations were significantly affected by the ventilation systems, out-carriage PM_2.5 concentrations and the passenger numbers. The largest in-carriage PM_2.5 and CO₂ concentrations were observed at 132 μg/m³ and 1855.0 ppm inside the carriages equipped with the oldest ventilation systems. The average PM_2.5 and CO₂ concentrations increased by 24.14% and 9.93% as the metro was driven from underground to overground. The average in-carriage PM_2.5 concentrations increased by 17.19% and CO₂ concentration decreased by 16.97% as the metro was driven from urban to the suburban area. It was found that PM_2.5 concentration is proportional to the on-board passenger number at a ratio of 0.4 μg/m³·passenger. A mass-balance model was developed to estimate the in-carriage PM_2.5 concentration under different driving conditions.     

On the electrification of road transportation – A review of the environmental,economic, and social performance of electric two-wheelers

Electrification is widely considered as a viable strategy for reducing the oil dependency and environmental impacts of road transportation. In pursuit of this strategy, most attention has been paid to electric cars. However, substantial, yet untapped, potentials could be realized in urban areas through the large-scale introduction of electric two-wheelers. Here, we review the environmental, economic, and social performance of electric two-wheelers, demonstrating that these are generally more energy efficient and less polluting than conventionally-powered motor vehicles. Electric two-wheelers tend to decrease exposure to pollution as their environmental impacts largely result from vehicle production and electricity generation outside of urban areas. Our analysis suggests that the price of e-bikes has been decreasing at a learning rate of 8%. Despite price differentials of 5000 ± 1800 EUR₂₀₁₂ kW h⁻¹ in Europe, e-bikes are penetrating the market because they appear to offer an apparent additional use value relative to bicycles. Mid-size and large electric two-wheelers do not offer such an additional use value compared to their conventional counterparts and constitute niche products at price differentials of 700 ± 360 EUR₂₀₁₂ kW⁻¹ and 160 ± 90 EUR₂₀₁₂ kW⁻¹, respectively. The large-scale adoption of electric two-wheelers can reduce traffic noise and road congestion but may necessitate adaptations of urban infrastructure and safety regulations. A case-specific assessment as part of an integrated urban mobility planning that accounts, e.g., for the local electricity mix, infrastructure characteristics, and mode-shift behavior, should be conducted before drawing conclusions about the sustainability impacts of electric two-wheelers.     

How wide should be the adjacent area to an urban motorway to prevent potential health impacts from traffic emissions?

In recent years, several studies show that people who live, work or attend school near the main roadways have an increased incidence and severity of health problems that may be related with traffic emissions of air pollutants. The concentrations of near-road atmospheric pollutants vary depending on traffic patterns, environmental conditions, topography and the presence of roadside structures. In this study, the vertical and horizontal variation of nitrogen dioxide (NO₂) and benzene (C₆H₆) concentration along a major city ring motorway were analysed. The main goal of this study is to try to establish a distance from this urban motorway considered “safe” concerning the air pollutants human heath limit values and to study the influence of the different forcing factors of the near road air pollutants transport and dispersion. Statistic significant differences (p = 0.001, Kruskal–Wallis test) were observed between sub-domains for NO₂ representing different conditions of traffic emission and pollutants dispersion, but not for C₆H₆ (p = 0.335). Results also suggest significant lower concentrations recorded at 100 m away from roadway than at the roadside for all campaigns (p < 0.016 (NO₂) and p < 0.036 (C₆H₆), Mann–Whitney test). In order to have a “safe” life in homes located near motorways, the outdoor concentrations of NO₂ must not exceed 44–60.0 μg m⁻³ and C₆H₆ must not exceed 1.4–3.3 μg m⁻³. However, at 100 m away from roadway, 81.8% of NO₂ receptors exceed the annual limit value of human health protection (40 μg m⁻³) and at the roadside this value goes up to 95.5%. These findings suggest that the safe distance to an urban motorway roadside should be more at least 100 m. This distance should be further studied before being used as a reference to develop articulated urban mobility and planning policies.     

Characteristics of air pollutants at near and far field regions of a national highway located at an industrial complex

This paper presents the characterization of air quality monitored at near field region (NFR) and far field region (FFR) of a national highway located at an industrial complex. The pollutants such as PM₁₀, SO₂ and NO₂ were monitored in two campaigns (11th September to 18th October 2012 and 18th January to 17th February 2013). The 24 h average PM₁₀ concentration at NFR and FFR were found to be 86.69 ± 18.56 μg/m³; 73.16 ± 16.21 μg/m³ and 89.44 ± 18.69 μg/m³; 81.91 ± 16.42 μg/m³, respectively during first and second campaign. In both the campaigns PM₁₀, SO₂ and NO₂ concentration at NFR was higher than FFR. The chemical characterization of PM₁₀ at NFR and FFR indicated the abundance of major elements such as Na (NFR = 30% and FFR = 32%), Ca (NFR = 12% and FFR = 14%) and ions namely NO₃⁻ (NFR = 71% and FFR = 68%) and NH₃⁺ (NFR = 15% and FFR = 19%). Further, at FFR, SO₄²⁻ and NO₃⁻ were found to be 18% and 35% higher than NFR indicating the conversions of SO₂ and NO₂ concentration into secondary particles. The measured SO₂ and NO₂ concentrations were 23 and 21% lower at FFR when compared to NFR confirms the secondary formation.The CALPUFF, EPA regulatory model was set up to understand the dynamics of air pollutants at the industrial complex. The predicted PM₁₀, SO₂ and NO₂ concentrations at NFR and FFR were found to be 32.31 ± 1.56 μg/m³ and 31.35 ± 1.27 μg/m³; 0.37 ± 0.21 μg/m³ and 0.06 ± 0.04 μg/m³; 12.83 ± 6.55 μg/m³ and 4.67 ± 2.77 μg/m³, respectively. The model showed moderate predictions for PM₁₀ (R² = 0.44–0.52), SO₂ (R² = 0.41–0.51) and NO₂ (R² = 0.45–0.61) concentrations.     

Controlled mechanical vibration applied to driver’s right heel to sustain alertness: Effects on cardiovascular behavior

Vehicle-related countermeasures to sustain driver’s alertness might improve traffic safety. The purpose of this study was to investigate the effects of somatosensory 20 Hz mechanical vibration, applied to driver’s right heel during prolonged, simulated, monotonous driving, on their cardiovascular hemodynamic behavior. In 12 healthy young male volunteers, during 90-min periods of simulated monotonous driving, we compared cardiovascular variables during application of 20 Hz mechanical vibration with 1.5 Hz as a control and with no vibration. The parameters recorded were indices of key cardiovascular hemodynamic phenomena, i.e., blood pressure as an indicator of stress, cardiac output, and total peripheral-vascular resistance. The principle results were that all conditions increased the mean blood pressure, and elicited a vascular-dominant reaction pattern typically observed in monotonous driving tasks. However, mean blood pressure and total peripheral-vascular resistance during the monotonous task were significantly decreased in those receiving the 20 Hz vibration as compared with 1.5 Hz and with no vibration. The observed differences indicate the cardiovascular system being more relieved from monotonous driving stress with the 20 Hz vibration. The major conclusion is that applying 20 Hz mechanical vibration to the right heel during long-distance driving in non-sleepy drivers could facilitate more physiologically appropriate status for vehicle operation and could be a potential vehicular countermeasure technology.     

Integrated approach to determine highway flooding and critical points of drainage

Among the natural hazards that threaten transportation infrastructure, flooding represents a major hazard to highways as it challenges their design, operation, efficiency and safety. In extreme cases, it may lead to massive obstruction of traffic and direct damages to the road structures themselves and indirect damages to the economic activity and development of the region. To enable the prevention of such consequences, and the proposition of adaptive measures for existing infrastructure, this paper presents an integrated framework to identify the most vulnerable points to flooding along a highway. This is done through the combination of remote sensing information (e.g. LiDAR based Digital Elevation Model, satellite imagery), a high-quality dataset, and a quasi-2D hydrodynamic model. The forcing condition is defined using a hyetograph associated to a storm with duration of 1 day and return period of 100 years. The selected highway is located in the Mexican state of Tabasco, where extreme precipitation events and floods are frequent. Results demonstrate the ability of the methodology to identify critical water levels along the road (h > 1.50 m) at those locations where flooding has been experienced, as well as points of inspection for the highway drainage. These locations were visited in the field and maintenance problems were detected that do increase its level of exposure. We show that this framework is useful for the generation of a flood management strategy to the analyzed highway, which includes an optimum location of adaptive measures to an anticipated more intense future climate.     

Age related annual crash incidence rate ratios in professional drivers of heavy goods vehicles

ObjectivesEvidence concerning crash risk for older heavy vehicle drivers is sparse, making it difficult to assess if it is prudent to encourage older drivers to remain in the workforce in a climate of labour shortages. The objective of this study was to estimate annual crash rate ratios of older male heavy vehicle drivers relative to their middle aged peers.MethodsData utilized in this study includes all crashes meeting inclusion criteria involving heavy goods vehicles, categorised as rigid trucks and articulated trucks; this data was recorded by the New South Wales Roads and Traffic Authority. The exposure to the risk of a crash was represented by distance travelled for each vehicle type and year, by age of driver, as estimated by the Australian Survey of Motor Vehicle Use. Negative binomial regression modelling was applied to estimate annual crash incidence rate ratios for male drivers in various age groups.ResultsA total of 26,146 crashes occurred in New South Wales during 1999–2006, involving a total of 54,191 vehicles; removing observations that did not meet the inclusion criteria, 19,736 observations remained representing 12,501 crashes. For rigid trucks, the incidence rate ratio for drivers aged 65+ years, compared to 45–54 year olds, was 0.74 (95% CI 0.51, 0.98). For articulated trucks, the annual crash incidence rate ratio for drivers aged 65+ years compared to 45–54 year olds was 1.4 (95% CI 0.96, 1.9), and that for drivers aged 55–64 years compared to 45–54 year olds was 1.1 (95% CI 0.83, 1.3).ConclusionsOlder male professional drivers of heavy goods vehicles have lower risk of crashes in rigid vehicles, possibly due to accrued driving experience and self-selection of healthy individuals remaining in the workforce. Thus, encouraging these drivers to remain in the workforce is appropriate in the climate of labour shortages, as this study provides evidence that to do so would not endanger road safety.     

Quantifying drivers’ acceptance of renewable fuel standard: Results from a choice experiment in South Korea

The production and use of renewable fuels in the transport sector are rapidly increasing. Renewable fuel standard (RFS) is a strong regulatory component and quantitative policy expected to have a significant market impact. In Korea, RFS implementation was agreed upon in July 2013 and will be enforced beginning in July 2015. Drivers’ acceptance is the most important consideration for RFS introduction and sustainable implementation. This study analyzed Korean customer preferences for RFS and quantified their acceptance level according to policy design. A choice experiment was analyzed with a mixed logit model to reflect the heterogeneity of respondents’ preferences. Respondents were relatively sensitive to the price increase, while other attributes had little effect on acceptance of RFS. Differences between the influences of attributes on drivers’ acceptance should be considered when designing RFS implementation. Furthermore, it is recommended that the price of transportation fuels should be limited to an increase between KRW 10 and 20/liter (USD 8.879 × 10⁻³ and 1.776 × 10⁻²/liter) to ensure high acceptance level, secure a budget for infrastructure, and achieve substantial environmental improvement.     

Inferring patterns in the multi-week activity sequences of public transport users

The public transport networks of dense cities such as London serve passengers with widely different travel patterns. In line with the diverse lives of urban dwellers, activities and journeys are combined within days and across days in diverse sequences. From personalized customer information, to improved travel demand models, understanding this type of heterogeneity among transit users is relevant to a number of applications core to public transport agencies’ function. In this study, passenger heterogeneity is investigated based on a longitudinal representation of each user’s multi-week activity sequence derived from smart card data. We propose a methodology leveraging this representation to identify clusters of users with similar activity sequence structure. The methodology is applied to a large sample (n = 33,026) from London’s public transport network, in which each passenger is represented by a continuous 4-week activity sequence. The application reveals 11 clusters, each characterized by a distinct sequence structure. Socio-demographic information available for a small sample of users (n = 1973) is combined to smart card transactions to analyze associations between the identified patterns and demographic attributes including passenger age, occupation, household composition and income, and vehicle ownership. The analysis reveals that significant connections exist between the demographic attributes of users and activity patterns identified exclusively from fare transactions.     

The environmental effects of changing speed limits: A quantile regression approach

Two speed management policies were implemented in the metropolitan area of Barcelona aimed at reducing air pollution concentration levels. In 2008, the maximum speed limit was reduced to 80 km/h and, in 2009, a variable speed system was introduced on some metropolitan motorways. This paper evaluates whether such policies have been successful in promoting cleaner air, not only in terms of average pollutant levels but also during high and low pollution episodes. To do so, we use a quantile regression approach for fixed effect panel data, which allows us analyzing different scenarios (beyond the average levels). We find that the variable speed system improves air quality with regard to the two pollutants considered here, being most effective when nitrogen oxide levels are not too low and when particulate matter concentrations are below extremely high levels. However, reducing the maximum speed limit from 120/100 km/h to 80 km/h has no effect – or even a slightly increasing effect – on the two pollutants, depending on the pollution scenario.     

The impact of urban rail transit on commercial property value: New evidence from Wuhan,China

The interaction between rail transit and the urban property market is a vital foundation for planning transit-based policy such as Value Capture and Transit Oriented Development (TOD). Yet only few studies have reported the impact of transit access on commercial property value. This paper presents empirical evidence from Wuhan, China, to enrich the knowledge in the subject area. Spatial autoregressive models were employed to estimate the commercial value capture, based on 676 observations along Wuhan’s metro rail line through the main business districts. Value appreciation was discovered within the 400 m radius of road network distance from Metro stations. The transit access premiums present as two tiers: 16.7% for the 0–100 m core area and approximately 8.0% within the 100–400 m radius. The result demonstrates the potential benefit of adopting value capture and optimising TOD planning to support sustainable urban rail transit investment. Amid rapid urbanisation in China, the evidence reported here could help better inform cities, across the developing world and beyond, of the benefits of adopting rail transit-based policy.     

Measuring transport related CO2 emissions induced by online and brick-and-mortar retailing

We develop a method for empirically measuring the difference in transport related carbon footprint between traditional and online retailing (“e-tailing”) from entry point to a geographical area to consumer residence. The method only requires data on the locations of brick-and-mortar stores, online delivery points, and residences of the region’s population, and on the goods transportation networks in the studied region. Such data are readily available in most countries. The method has been evaluated using data from the Dalecarlia region in Sweden, and is shown to be robust to all assumptions made. In our empirical example, the results indicate that the average distance from consumer residence to a brick-and-mortar retailer is 48.54 km in the studied region, while the average distance to an online delivery point is 6.7 km. The results also indicate that e-tailing increases the average distance traveled from the regional entry point to the delivery point from 47.15 km for a brick-and-mortar store to 122.75 km for the online delivery points. However, as professional carriers transport the products in bulk to stores or online delivery points, which is more efficient than consumers’ transporting the products to their residences, the results indicate that consumers switching from traditional to e-tailing on average reduce their transport CO₂ footprints by 84% when buying standard consumer electronics products.     

Cycleways and footpaths: What separation is needed for equivalent air pollution dose between travel modes?

Cycling and walking are being promoted in many urban areas as alternatives to motorised transport for health, environmental, and financial reasons. The reduced congestion and resulting decrease in the overall amount of pollution reduced can be expected to result in health benefits for the community. However, active commuters, due to their increased respiration rates and often increased travel times can expect to receive larger doses of air pollution compared with those using motorised forms of transport. However, given the large dropoff in concentrations away from a road, it can be expected that significant reductions can be achieved even with relatively small increases in separation between the path of cyclists/pedestrians and motor vehicles.This study presents a simple methodology for calculating the separation needed for cyclists and pedestrians to experience the same air pollution dose as car commuters. An example is given based on carbon monoxide (CO) data collected in a field campaign consisting of a car driver, a cyclist and a pedestrian travelling on a 2600 metre loop of road in Auckland. For this case study, the estimated distance from the centreline needed for cyclists and pedestrians to receive an equivalent dose of CO as motorists was found to range from 5.8 to 14.2 m depending on the commuting mode and the dispersion state of the atmosphere at the site. This was equal to a CO concentration reduction of 0.1–0.14 ppm per metre. Recommendations on facility modifications and route selections have been made to make active mode commuting safer.