Train-Track Interaction and Mechanisms of Irregular Wear on Wheel and Rail Surfaces

Summary High-frequency train-track interaction and mechanisms of wheel/rail wear that is non-uniform in magnitude around/along the running surface are surveyed. Causes, consequences and suggested remedies to relieve the problems are discussed for three types of irregular wheel/rail wear: (1) short-pitch rail corrugation on tangent tracks and large radius curves, (2) wheel corrugation as caused by tread braking, and (3) wheel polygonalisation. The state-of-the-art in modelling of dynamic train-track interaction in conjunction with prediction of irregular wear is reviewed.     

An investigation into the mechanism of the out-of-round wheels of metro train and its mitigation measures

This paper presents an investigation into the mechanism of polygonal wear of metro train wheels through experiments conducted at field sites. The experiments comprise dynamic behaviour test of vehicle and track system, the wheel transverse wear and polygonal wear measurements, rail corrugation and rail weld joint irregularities’ measurements. Moreover, the numerical modal analysis of the wheelset is also performed. The wheel measurement results show that most wheels exhibit obvious eccentricity and polygonal wear with 5–8 harmonics. The investigation results indicate that the wavelength-fixing mechanism of the wheel out-of-roundness with 5–8 harmonics is the P2 resonance. Four measures have been proposed to mitigate the formation of wheel polygonal wear based on the field measurement results.     

Rotational vibration absorber for the mitigation of rail rutting corrugation

Torsional vibrations of metro wheel sets are known to be involved in the wavelength-fixing mechanism of the rutting-type rail corrugation. In the first part of this paper, the basic conditions for this type of wear to appear are established using a theory developed in the frequency domain. The efficiency of a dynamic vibration absorber tuned to the first torsional resonance of the wheel set to mitigate rutting corrugation is evaluated numerically. In the second part, the phenomenon is studied on a quarter-scale test bench. The scaling laws for wheel–roller wear predictions are established. The efficiency of the dynamic vibration absorber is evaluated on the scaled bench. The results are compared with theoretical predictions from a linear model. Additionally, the measurements are compared with numerical results from a multi-body model portraying the experiment.     

Out-of-round railway wheels—a study of wheel polygonalization through simulation of three-dimensional wheel-rail interaction and wear

The objective of this study is to develop a tool for investigation of wheel tread polygonalization with radial irregularities including 1 to 20 wavelengths around the circumference of the wheel. Therefore, an existing multibody system model for simulation of general three-dimensional train-track interaction (accounting for frequencies up to several kHz) is extended with rolling contact mechanics according to FASTSIM. Furthermore, the model is also modified to allow for general wheel-rail profiles. The numerical model uses the concept of an iteration scheme including simulation of dynamic train-track interaction in the time domain coupled with a long-term wear model. A demonstration example including a bogie of a subway train travelling on a straight track is presented. In the example, an initial wheel out-of-roundness (OOR) is applied to the wheels. This irregularity is based on an amplitude spectrum derived from measurements on new wheels. Simulation results show that the most important wavelength-fixing mechanisms of the wheel OOR are (i) the vertical resonance of the coupled train-track system at approximately 40 Hz (the P2 resonance) and (ii) the frequency region including the lowest vertical track antiresonance at 165 Hz, where the dynamic track stiffness is high. Only a straight track is studied, but the model allows for asymmetric train motion on such a track.     

Long-term wear and rolling contact fatigue behaviour of a conformal wheel profile designed for large radius curves

There are many reasons to optimise the wheel–rail interface through redesign or maintenance. Minimising wear and rolling contact fatigue (RCF) initiation on wheels and/or rails is often at the forefront of such considerations. This paper covers the design of a conformal wheel profile and its long-term wear and RCF performance to optimise the wheel–rail interface and subsequently reduce the occurrence of surface-initiated RCF on South Africa’s iron ore export line. A comparative study is performed using multibody dynamics simulation together with numerical wheel wear and RCF predictions. The advantages of a conformal wheel profile design are illustrated by evaluating the worn shape and resulting contact conditions of the conformal design. The conformal design has a steadier equivalent conicity progression and a smaller conicity range compared with the current wheel profile design over the wheel’s wear life. The combination of a conformal wheel profile design with 2?mm hollow wear and inadequate adherence to grinding tolerances often result in two-point contact, thereby increasing the probability of RCF initiation. The conformal wheel profile design proved to have wear and potential RCF benefits compared with the current wheel profile design. However, implementation of such a conformal wheel profile must be accompanied by improved rail grinding practices to ensure rail profile compliance.     

Prediction of the interaction between a simple moving vehicle and an infinite periodically supported rail – Green's functions approach

This paper herein describes the interaction between a simple moving vehicle and an infinite periodically supported rail, in order to signalise the basic features of the vehicle/track vibration behaviour in general, and wheel/rail vibration, in particular. The rail is modelled as an infinite Timoshenko beam resting on semi-sleepers via three-directional rail pads and ballast. The time-domain analysis was performed applying Green's matrix of the track method. This method allows taking into account the nonlinearities of the wheel/rail contact and the Doppler effect. The numerical analysis is dedicated to the wheel/rail response due to two types of excitation: the steady-state interaction and rail irregularities. The study points out to certain aspects regarding the parametric resonance, the amplitude-modulated vibration due to corrugation and the Doppler effect.     

Modelling the effects of friction modifiers on rail corrugation in cornering

A proposed solution to the problem of rail corrugation on curves of urban lines is the use of friction modifiers. Recent experimental research indicates this approach can be effective. This paper makes use of two theoretical models to study the effects of friction modifiers on corrugation in cornering. The first one is a nonlinear time-domain model that predicts corrugation growth from a series of simulated passes of a bogie. The second one is a frequency domain model of wheel–rail interaction, linearised about a steady cornering state, estimated from the nonlinear model. Both models predict reduction of growth of corrugation due to the use of friction modifiers. Friction modifiers can alter the steady cornering state to one with somewhat lower creeps and much lower tractions. Major reductions in corrugation growth rate have been shown to occur if a wheel can be prevented from reaching a state of full sliding when subject to oscillating creeps caused by existing rail corrugation.     

Modelling of wear and fatigue defect formation in wheel–rail contact

The model for analysing wear and fatigue defect formation is developed based on the approaches of contact and fracture mechanics. The model includes the solution of the contact problem for the wheel and rail to find the shape, size and position of the contact zones and the contact stresses and calculation of the surface wear and the function of damage accumulation in the rail and wheel. The wear rate and the worn-profile evolution of the wheel surface are calculated using both statistic and deterministic approaches to modelling of vehicle dynamics (tribo-dynamic modelling). The influence of the evolution of the wheel–rail profiles due to wear on the damage accumulation process is analysed. It is shown that for some values of the wear rate coefficient, the wear process can prevent the crack initiation under the wheel surface.     

Simulation of dynamic interaction between train and railway turnout

Dynamic train-track interaction is more complex in railway turnouts (switches and crossings) than that in ordinary tangent or curved tracks. Multiple contacts between wheel and rail are common, and severe impact loads with broad frequency contents are induced, when nominal wheel-rail contact conditions are disturbed because of the continuous variation in rail profiles and the discontinuities in the crossing panel. The absence of transition curves at the entry and exit of the turnout, and the cant deficiency, leads to large wheel-rail contact forces and passenger discomfort when the train is switching into the turnout track. Two alternative multibody system (MBS) models of dynamic interaction between train and a standard turnout design are developed. The first model is derived using a commercial MBS software. The second model is based on a multibody dynamics formulation, which may account for the structural flexibility of train and track components (based on finite element models and coordinate reduction methods). The variation in rail profile is accounted for by sampling the cross-section of each rail at several positions along the turnout. Contact between the back of the wheel flange and the check rail, when the wheelset is steered through the crossing, is considered. Good agreement in results from the two models is observed when the track model is taken as rigid.     

Short wavelength rail corrugation and non-steady-state contact mechanics

J. J. Kalker has been the first to consider non-steady-state or transient contact mechanics. Based on Kalker the second author developed a linear contact model for the non-steady-state rolling contact of a wheel running over slightly corrugated rails. The theoretical investigations are concentrated on linear, non-steady-state contact mechanics superimposed to a nonlinear reference state. The reference state is given by the running behaviour of a wheelset due to traction, curving or hunting. For the linear, non-steady-state analysis Kalker's theory has to be modified to predict wear rates in dependency of the corrugation wavelengths. As a result corrugations are only amplified in the range between 2 and 10 cm. Therefore, non-steady-state contact mechanics and wear are responsible for a wavelength fixing mechanism. Structural mechanics of the rail indicate that wavelength in this range is predominantly amplified.     

Dynamic responses of a high-speed railway car due to wheel polygonalisation

The polygonal wear around the wheel circumference could pose highly adverse influences on the wheel/rail interactions and thereby the performance of the vehicle system. In this study, the effects of wheel polygonalisation on the dynamic responses of a high-speed rail vehicle are investigated through development and simulations of a comprehensive coupled vehicle/track dynamic model. The model integrates flexible slab track, wheelsets and axle boxes subsystem models so as to account for elastic deformations caused by impact loads induced by the wheel polygonalisation. A field-test programme was undertaken to acquire the polygonal wear profile and axle box acceleration response of a high-speed train, and the data are used to demonstrate the validity of the coupled vehicle/track system model. Subsequently, the effects of wheel polygonalisation are evaluated in terms of wheel/rail impact forces, axle box vertical acceleration and dynamic stress developed in the axle considering different amplitudes and harmonic orders of the polygonal wear. The results suggest that the high-order wheel polygonalisation can give rise to high-frequency impact loads at the wheel/rail interface, and excite some of the vibration modes of the wheelset and the axle box leading to high-magnitude axle box acceleration and dynamic stress in the wheelset axle.     

Behaviour of the Normal Contact Force Under Multiple Wheel/Rail Interaction

The wheel/rail contact forces are calculated in the frequency domain using a track model with multiple wheels on the rail. The effects of the wave reflections between the wheels on the contact force are studied. Different pad stiffnesses are used in the calculations to investigate the influence on the contact force. It is shown that the contact force can have up to four main peaks in the frequency region 550-1200?Hz due to the wave reflections between the wheels, so that the wavelengths of short pitch corrugation can be expected to be associated with multiple frequencies. As a conclusion, it is recommended that in a model for predicting short pitch corrugation the effects of multiple wheel/rail interactions need to be included.     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

Stochastic analysis of dynamic interaction between train and railway turnout

The performance of a railway turnout (switch and crossing) is influenced by a large number of input parameters of the complex train–turnout system. To reach a robust design that performs well for different traffic situations, random distributions (scatter) of these inputs need to be accounted for in the design process. Stochastic analysis methods are integrated with a simulation model of the dynamic interaction between train and turnout. For a given nominal layout of the turnout, using design of experiments methodology and a two-level fractional factorial screening design, four parameters (axle load, wheel–rail friction coefficient, and wheel and rail profiles) are identified to be the most significant. These parameters are further investigated using a three-level full factorial design and stochastic analysis. The random distributions of transverse wheel profile and set of transverse rail profiles along the switch panel are accounted for by the Karhunen–Loève expansion technique. The influence of the random distributions of the input parameters on the statistical outputs of wheel–rail contact forces, wear and rolling contact fatigue is assessed using Latin hypercube sampling to generate a number of stochastic load realizations.     

A study on high-speed rolling contact between a wheel and a contaminated rail

A 3-D explicit finite element model is developed to investigate the transient wheel–rail rolling contact in the presence of rail contamination or short low adhesion zones (LAZs). A transient analysis is required because the wheel passes by a short LAZ very quickly, especially at high speeds. A surface-to-surface contact algorithm (by the penalty method) is employed to solve the frictional rolling contact between the wheel and the rail meshed by solid elements. The LAZ is simulated by a varying coefficient of friction along the rail. Different traction efforts and action of the traction control system triggered by the LAZ are simulated by applying a time-dependent driving torque to the wheel axle. Structural flexibilities of the vehicle–track system are considered properly. Analysis focuses on the contact forces, creepage, contact stresses and the derived frictional work and plastic deformation. It is found that the longitudinal contact force and the maximum surface shear stress in the contact patch become obviously lower in the LAZ and much higher as the wheel re-enters the dry rail section. Consequently, a higher wear rate and larger plastic flow are expected at the location where the dry contact starts to be rebuilt. In other words, contact surface damages such as wheel flats and rail burns may come into being because of the LAZ. Length of the LAZ, the traction level, etc. are varied. The results also show that local contact surface damages may still occur as the traction control system acts.     

Development and validation of a wear model for the analysis of the wheel profile evolution in railway vehicles

The numerical wheel wear prediction in railway applications is of great importance for different aspects, such as the safety against vehicle instability and derailment, the planning of wheelset maintenance interventions and the design of an optimal wheel profile from the wear point of view. For these reasons, this paper presents a complete model aimed at the evaluation of the wheel wear and the wheel profile evolution by means of dynamic simulations, organised in two parts which interact with each other mutually: a vehicle's dynamic model and a model for the wear estimation. The first is a 3D multibody model of a railway vehicle implemented in SIMPACK?, a commercial software for the analysis of mechanical systems, where the wheel–rail interaction is entrusted to a C/C++user routine external to SIMPACK, in which the global contact model is implemented. In this regard, the research on the contact points between the wheel and the rail is based on an innovative algorithm developed by the authors in previous works, while normal and tangential forces in the contact patches are calculated according to Hertz's theory and Kalker's global theory, respectively. Due to the numerical efficiency of the global contact model, the multibody vehicle and the contact model interact directly online during the dynamic simulations.

The second is the wear model, written in the MATLAB® environment, mainly based on an experimental relationship between the frictional power developed at the wheel–rail interface and the amount of material removed by wear. Starting from a few outputs of the multibody simulations (position of contact points, contact forces and rigid creepages), it evaluates the local variables, such as the contact pressures and local creepages, using a local contact model (Kalker's FASTSIM algorithm). These data are then passed to another subsystem which evaluates, by means of the considered experimental relationship, both the material to be removed and its distribution along the wheel profile, obtaining the correspondent worn wheel geometry.

The wheel wear evolution is reproduced by dividing the overall chosen mileage to be simulated in discrete spatial steps: at each step, the dynamic simulations are performed by means of the 3D multibody model keeping the wheel profile constant, while the wheel geometry is updated through the wear model only at the end of the discrete step. Thus, the two parts of the whole model work alternately until the completion of the whole established mileage. Clearly, the choice of an appropriate step length is one of the most important aspects of the procedure and it directly affects the result accuracy and the required computational time to complete the analysis.

The whole model has been validated using experimental data relative to tests performed with the ALn 501 ‘Minuetto’ vehicle in service on the Aosta–Pre Saint Didier track; this work has been carried out thanks to a collaboration with Trenitalia S.p.A and Rete Ferroviaria Italiana, which have provided the necessary technical data and experimental results.     

Switch Panel wear loading – a parametric study regarding governing train operational factors

The acting forces and resulting material degradation at the running surfaces of wheels and rail are determined by vehicle, track, interface and operational characteristics. To effectively manage the experienced wear, plastic deformation and crack development at wheels and rail, the interaction between vehicle and track demands a system approach both in maintenance and in design. This requires insight into the impact of train operational parameters on rail- and wheel degradation, in particular at switches and crossings due to the complex dynamic behaviour of a railway vehicle at a turnout. A parametric study was carried out by means of vehicle-track simulations within the VAMPIRE® multibody simulation software, performing a sensitivity analysis regarding operational factors and their impact on expected switch panel wear loading. Additionally, theoretical concepts were cross-checked with operational practices by means of a case study in response to a dramatic change in lateral rail wear development at specific switches in Dutch track. Data from train operation, track maintenance and track inspection were analysed, providing further insight into the operational dependencies. From the simulations performed in this study, it was found that switch rail lateral wear loading at the diverging route of a 1:9 type turnout is significantly influenced by the level of wheel–rail friction and to a lesser extent by the direction of travel (facing or trailing). The influence of other investigated parameters, being vehicle speed, traction, gauge widening and track layout is found to be small. Findings from the case study further confirm the simulation outcome. This research clearly demonstrates the contribution flange lubrication can have in preventing abnormal lateral wear at locations where the wheel–rail interface is heavily loaded.     

A dynamic wheel–rail impact analysis of railway track under wheel flat by finite element analysis

Wheel–rail interaction is one of the most important research topics in railway engineering. It involves track impact response, track vibration and track safety. Track structure failures caused by wheel–rail impact forces can lead to significant economic loss for track owners through damage to rails and to the sleepers beneath. Wheel–rail impact forces occur because of imperfections in the wheels or rails such as wheel flats, irregular wheel profiles, rail corrugations and differences in the heights of rails connected at a welded joint. A wheel flat can cause a large dynamic impact force as well as a forced vibration with a high frequency, which can cause damage to the track structure. In the present work, a three-dimensional finite element (FE) model for the impact analysis induced by the wheel flat is developed by the use of the FE analysis (FEA) software package ANSYS and validated by another validated simulation. The effect of wheel flats on impact forces is thoroughly investigated. It is found that the presence of a wheel flat will significantly increase the dynamic impact force on both rail and sleeper. The impact force will monotonically increase with the size of wheel flats. The relationships between the impact force and the wheel flat size are explored from this FEA and they are important for track engineers to improve their understanding of the design and maintenance of the track system.