船体影响下舵附推力鳍的节能效果研究

通过CFD方法实现船舶自航试验模拟,计算在船体影响下舵附推力鳍可带来2.3%左右的节能效果,分析指出舵附推力鳍通过吸收螺旋桨尾流能量,增加螺旋桨推力,改善船尾伴流,降低船身阻力的节能原理。计算敞水状态下桨/舵/舵附推力鳍系统的推进性能,并与船体影响下的推进性能进行比较,指出敞水状态下舵附推力鳍的工作状态与在船体影响下有着较大不同,为设计人员提供基础参考。     

船体影响下舵附推力鳍的节能效果研究

通过 CFD方法实现船舶自航试验模拟,计算在船体影响下舵附推力鳍可带来2.3%左右的节能效果,分析指出舵附推力鳍通过吸收螺旋桨尾流能量,增加螺旋桨推力,改善船尾伴流,降低船身阻力的节能原理。计算敞水状态下桨/舵/舵附推力鳍系统的推进性能,并与船体影响下的推进性能进行比较,指出敞水状态下舵附推力鳍的工作状态与在船体影响下有着较大不同,为设计人员提供基础参考。     

Fluent在螺旋桨与舵附推力鳍数值模拟中的应用

动力系统是船舶的重要组成部分,随着船舶的高速化、大型化发展趋势,对船舶动力系统的性能有更高的要求,在船舶动力系统中,螺旋桨是一种具有复杂作用力的机构,舵附推力鳍是螺旋桨的尾流能量收集装置,对于改善舰船螺旋桨的水动力性能有重要作用。Fluent是一种计算流体力学CFD的数值模拟软件,广泛应用于各种机械设备如机翼、汽车、风力发电机扇叶等的流体动力学分析。本文首先介绍了Fluent的基本原理,采用面元法建立了螺旋桨的流体动力学模型,并基于Fluent对螺旋桨和舵附推力鳍进行了有限元建模和水动力特性仿真。     

螺旋桨-舵-舵球推进组合体水动力性能的计算与仿真研究

建立了螺旋桨-舵-舵球推进组合体水动力性能的计算机仿真系统.系统研究了螺旋桨-舵-舵球推进组合体水动力性能的计算方法,建立了相关的仿真数学模型.模型中螺旋桨的水动力性能采用升力面理论涡格法计算,桨毂的影响采用Hess-Smith面元法计算.将舵及舵球的诱导速度作为对桨及桨毂进流的修正,以考查舵及舵球的影响.舵与舵球水动力的计算采用以速度势定义的面元法.在此基础上,进行系统功能设计,编制了计算机仿真系统.应用此软件设计了四种舵球方案,并进行了相应方案螺旋桨的定常水动力性能的计算对比分析.仿真计算表明,设计的舵球方案可有效地提高螺旋桨的水动力性能.其中不对称型舵球方案在实船对比测试中获得了节能5.1%,提高主机功率储备5%以上的效果.     

鳍对拖式吊舱推进器水动力性能的影响

为研究鳍的影响,建立了吊舱推进器的水动力性能的计算模型.计算了吊舱推进器安装和不安装鳍时的水动力性能,螺旋桨与吊舱及鳍之间的相互影响通过迭代计算加以考虑.采用基于速度势的基本积分微分方程,并采用双曲面元以消除面元间的间隙.采用Newton-Raphson迭代求解压力分布使得桨叶的随边满足压力库塔条件,用柳泽的方法求得物体表面的速度分布以避免数值求导的奇异性.无鳍.单鳍和双鳍的吊舱推进器水动力性能计算结果表明,附加鳍时吊舱推进器的螺旋桨推力增加,由于鳍上产生推力导致吊舱阻力减小.附加双鳍时的吊舱推进器水动力性能最好,附加单鳍时次之,无鳍时最低.     

导管螺旋桨的推力、进速与诱导速度沿盘面的分布特征

运用计算流体力学方法对在不同工况中导管螺旋螺旋桨的推力、转矩以及螺旋桨周围的流场特性进行观察,对导管螺旋桨盘面处的进速、诱导速度的沿盘面的分布以及螺旋桨所发出的推力与周围速度场之间的关系进行分析。计算结果表明,由于导管出口处激发出的下游尾涡作用,螺旋桨推力、转矩、盘面的进速以及诱导速度分量的时域过程表现出了一种多次峰谷值振荡变化的动力学特征;轴向进速是影响螺旋桨推力、转矩变化的主要因素。     

毂帽鳍的节能机理分析

应用计算流体力学方法(CFD),结合RNG湍流模型和动参考系计算模型(MRF),对普通桨和桨+毂帽鳍的敞水水动力性能进行计算,通过对毂帽鳍及螺旋桨叶片的受力情况进行研究,结合普通桨和桨+毂帽鳍2种情况的桨后尾流场分析,结果表明,桨后毂帽鳍上产生的推力和扭矩有限,桨+毂帽鳍的节能机理主要是利用毂帽鳍削弱了毂涡,改善了桨后流场周向速度,提高了前桨的推力,从而提高了效率。     

毂帽鳍的节能机理分析

应用计算流体力学方法（CFD）,结合 RNG湍流模型和动参考系计算模型（MRF）,对普通桨和桨+毂帽鳍的敞水水动力性能进行计算,通过对毂帽鳍及螺旋桨叶片的受力情况进行研究,结合普通桨和桨+毂帽鳍2种情况的桨后尾流场分析,结果表明,桨后毂帽鳍上产生的推力和扭矩有限,桨+毂帽鳍的节能机理主要是利用毂帽鳍削弱了毂涡,改善了桨后流场周向速度,提高了前桨的推力,从而提高了效率。     

舵球鳍参数对扭曲舵水动力性能的影响研究（英文）

文章对桨后普通舵和扭曲舵的水动力性能进行了试验研究,并采用计算流体力学方法对桨舵系统的水动力性能进行计算,得到了不同进速系数下的推力系数、扭矩系数以及敞水效率,并绘制了敞水性能曲线。通过桨舵模型试验值与计算值的对比,验证了计算方法的可靠性。为了进一步提高扭曲舵的节能效果,在扭曲舵前安装了舵球,优化舵球的半径后在舵球两端安装推力鳍,通过优选推力鳍的各个参数(安装位置、展弦比和安装角),使桨舵系统的敞水效率逐步提高。确定了舵球鳍的最优参数后,桨—扭曲舵系统的效率进一步提高1.2%。最后通过观察舵表面压力分布、舵附近轴向速度和迹线分布,分析了舵球鳍对桨舵干扰的影响。     

舵球鳍参数对扭曲舵水动力性能的影响研究

文章对桨后普通舵和扭曲舵的水动力性能进行了试验研究,并采用计算流体力学方法对桨舵系统的水动力性能进行计算,得到了不同进速系数下的推力系数、扭矩系数以及敞水效率,并绘制了敞水性能曲线。通过桨舵模型试验值与计算值的对比,验证了计算方法的可靠性。为了进一步提高扭曲舵的节能效果,在扭曲舵前安装了舵球,优化舵球的半径后在舵球两端安装推力鳍,通过优选推力鳍的各个参数（安装位置、展弦比和安装角）,使桨舵系统的敞水效率逐步提高。确定了舵球鳍的最优参数后,桨—扭曲舵系统的效率进一步提高1.2%。最后通过观察舵表面压力分布、舵附近轴向速度和迹线分布,分析了舵球鳍对桨舵干扰的影响。     

33rd International Conference on Ocean,Offshore and Arctic Engineering （OMAE2014）

正San Francisco,California,June 8-13,2014.OMAE 2014 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to:·meet and present advances in technology and its scientific support;·to exchange ideas and experiences whilst promoting technological progress and its application in industry·to promote international cooperation in ocean,offshore and arctic engineering.In line with the tradition of excellence of previous OMAE conferences,more than 900 technical papers are planned for presentation.Outreach for Engineers Specialty Forum This Specialty Forum is designed for students and professionals who may not be familiar with the Ocean and Offshore industry,as well as those who have just recently specialized in this field.     

The 11th International Conference on Hydrodynamics (ICHD 2014)

正19–24 October 2014 SingaporeCONFERENCE THEMES The overall aim of the ICHD Conference is to provide a forum for participants from around the world to review,discuss and present the latest developments in the broad discipline of hydrodynamics and fluid mechanics.The first International Conference on Hydrodynamics(ICHD)was initiated in 1994 in Wuxi,China.Since then,9 more ICHD conferences were held subsequently in Hong Kong,Seoul,Yokohama,Tainan,Perth,Ischia,Nantes,Shanghai and St Petersburg.Evidently the ICHD conference has become an important event among academics,researchers,engineers and operators,working in the fields closely related to the science and technology of hydrodynamics.The 11th ICHD will be held in Singapore in 2014.     

第十二届深水操作会议和展览会(英文)

正November 4-6,2014Moody Gardens HotelConvention Center/Galveston,TX The Deepwater Operations Conference and Exhibition is celebrating its 12th anniversary this year.This growing event will continue the tradition of excellence in addressing operational challenges involved in developing deepwater resources.We will return to the Moody Gardens Hotel and Convention Center on November 5-7,2014 in Galveston,Texas.     

舰艇反鱼雷技术

对目前舰艇反鱼雷技术中的非杀伤、软杀伤和硬杀伤等比较先进的手段进行了阐述,并在此基础上分析研究了舰艇反鱼雷技术的发展趋势。     

Community-Based Management for Sustainable Fisheries Resources in Phang-nga Bay,Thailand

Fishing communities, the Government of Thailand Department of Fisheries, local nongovermnental organizations, universities, the Food and Agriculture Organization of the United Nations (FAO), and FAO's Bay of Bengal Program have undertaken a partnership in management of Phang-nga Bay's coastal resources. It is the first project of its kind in Thailand, and although still in the early stages, offers insights that may contribute to our knowledge of how we can improve our management of coastal resources, including the importance of (1) building relationships within the governance process; (2) combining education, enforcement, and economic incentives to achieve compliance; (3) implementing solutions early; and (4) government support of community-based decisions. These insights reinforce trends emerging in other coastal management projects in the Asian region.     

Catalyzing Coastal Management in Kenya and Zanzibar: Building Capacity and Commitment

Site-based projects were initiated in Chawka Bay-Paje, Zanzibar, and Nyali-Bamburi-Shanzu, Kenya, to demonstrate the benefits of an integrated coastal management (ICM) approach for addressing coastal issues such as tourism development and enhancement of resource-dependent village economies in eastern Africa. A two-year, multidonor project used three primary strategies to make rapid, but sustainable, progress toward ICM. These included using interagency government teams for ICM planning, adopting an internationally recognized framework for ICM as a project ''road map,'' and explicitly incorporating capacity-building strategies into all aspects of the project. Within two years, integrated ICM action strategies, prepared through participatory processes, were being implemented at both sites, and both teams were working to expand the scale and scope of ICM in their nation. More importantly, the project helped create committed, capable, interagency groups that continue to work together to address urgent ICM issues.     

单相PWM整流器的建模与仿真分析

文章详细分析了单相VSR型PWM整流器的整流原理,建立了电流内环,电压外环的单相VSR型PWM整流控制器的数学模型和逻辑框图。在MATLAB／Simulink软件环境中进行了仿真,分析了模型的可行性。     

A simplified method for reliability- and integrity-based design of engineering systems and its application to offshore mooring systems

This paper presents a simplified method for the reliability- and the integrity-based optimal design of engineering systems and its application to offshore mooring systems. The design of structural systems is transitioning from the conventional methods, which are based on factors of safety, to more advanced methods, which require calculation of the failure probability of the designed system for each project. Using factors of safety to account for the uncertainties in the capacity (strength) or demands can lead to systems with different reliabilities. This is because the number and arrangement of components in each system and the correlation of their responses could be different, which could affect the system reliability. The generic factors of safety that are specified at the component level do not account for such differences. Still, using factors of safety, as a measure of system safety, is preferred by many engineers because of the simplicity in their application. The aim of this paper is to provide a simplified method for design of engineering systems that directly involves the system annual failure probability as a measure of system safety, concerning system strength limit state. In this method, using results of conventional deterministic analysis, the optimality factors for an integrity-based optimal design are used instead of generic safety factors to assure the system safety. The optimality factors, which estimate the necessary change in average component capacities, are computed especially for each component and a target system annual probability of system failure using regression models that estimate the effect of short and long term extreme events on structural response. Because in practice, it is convenient to use the return period as a measure to quantify the likelihood of extreme events, the regression model in this paper is a relationship between the component demands and the annual probability density function corresponding to every return period. This method accounts for the uncertainties in the environmental loads and structural capacities, and identifies the target mean capacity of each component for maximizing its integrity and meeting the reliability requirement. In addition, because various failure modes in a structural system can lead to different consequences (including damage costs), a method is introduced to compute optimality factors for designated failure modes. By calculating the probability of system failure, this method can be used for risk-based decision-making that considers the failure costs and consequences. The proposed method can also be used on existing structures to identify the riskiest components as part of inspection and improvement planning. The proposed method is discussed and illustrated considering offshore mooring systems. However, the method is general and applicable also to other engineering systems. In the case study of this paper, the method is first used to quantify the reliability of a mooring system, then this design is revised to meet the DNV recommended annual probability of failure and for maximizing system integrity as well as for a designated failure mode in which the anchor chains are the first components to fail in the system.     

无人反潜系统自主指挥控制研究

无人反潜系统的指挥控制问题是关系其具备实际作战能力的主要问题之一。论文在分析无人反潜系统指控原理和其自主指控水平分级的基础上,采用可变自主控制结构,研究了无人反潜系统分级可变自主指控实现的方法。该方法可赋予无人反潜系统可变的指挥控制自主性,使其在工作环境中能够实时评估自身的自主能力,并主动引入人工干预。这种具备人机智能融合特性的自主指挥控制方法更适应无人反潜系统在复杂战场环境中实战化的需求。     

船舶系泊定位装置方案介绍

简述船舶定位装置的功能、组成、工作原理及需要注意的问题等,对船舶系泊定位的设计有借鉴意义.