共查询到19条相似文献,搜索用时 46 毫秒
1.
2.
3.
超大型浮体模块水弹性响应和结构强度分析 总被引:1,自引:0,他引:1
水弹性方法针对超大型浮体的刚度特点,充分考虑了结构变形与流体运动的相互作用,是进行结构安全性分析的有效手段。文章采用水弹性分析方法研究了超大型浮体单模块总体波浪载荷以及结构应力响应。首先基于三维有限元方法分析了模块在真空中的总振动模态,然后结合模态叠加法和边界元法计算了模块在流场里面的谐振和模态响应。在此基础上,研究了各模态下结构的应力响应以及总应力响应,并分析了危险载荷工况,评估了超大型浮体单模块的结构强度,研究结果对超大型浮体单模块结构优化设计和安全性评估具有一定的指导意义。 相似文献
4.
精确评估模块柔性连接性能对连接器和超大型浮体的结构安全性具有重要意义,而模型试验是获取超大型浮体模块柔性连接性能的必要手段。文章以横向浮筒式的浅吃水超大型浮体为研究对象,根据连接器动响应计算结果,设计了柔性连接器模型;通过不同幅值和载荷组合的连接器静态拉伸和压缩试验,研究了超大型浮体连接器的刚度特性,探讨了组合载荷对连接器刚度的影响;通过不同幅值和周期的连接器纵向动态载荷试验,研究了超大型浮体连接器在动态载荷作用下的结构响应,验证了超大型浮体连接器结构的安全性和适用性。试验结果表明在静态和动态载荷作用下文中设计的柔性连接器连接可靠、结构安全,连接器载荷、位移和应力测量结果可为验证连接器结构设计和计算方法提供依据。 相似文献
5.
6.
本文采用基于离散模块思想的频域水弹性分析方法,对处于非均匀海洋环境下的铰接超大型浮体的水弹性响应进行分析.该方法首先将连续浮体离散为多刚体系统;然后应用三维势流理论获得各个刚体的水动力系数,将其与弹性梁刚度阵进行耦合,得到浮体在波浪作用下的运动学方程;随后引入铰接约束矩阵,建立铰接超大型浮体在非均匀海底环境下的运动学方程,在频域中求解该方程得到浮体的位移响应;最后利用梁的弯曲理论,获得浮体的弯矩分布以及铰接点处的轴向力和剪力.通过对比不同入射角度、波长和海底条件下浮体的水弹性响应,发现非均匀海底对铰接点的位移和受力有明显的影响. 相似文献
7.
针对海上超大型浮体与波浪相互作用这一流固耦合问题,把超大型浮体简化为二维薄板,应用特征函数展开法求解流场速度势,采用正弦模态函数对结构运动进行模态展开分析,计算浮体的水弹性响应。 相似文献
8.
精确评估模块连接处荷载特性对超大型浮体的水动力设计及结构安全性研究具有重要的工程意义。文章以5模块半潜式超大型浮体为研究对象,考虑碰撞荷载和风、浪、流环境荷载的联合作用并采用AQWA软件对超大型浮体模块连接点处的受力特性开展了数值计算。船舶碰撞荷载简化为矩形脉冲,采用定常风、定常流以及JONSWAP波谱,探讨了船舶碰撞角度、撞击位置、环境荷载等因素对模块连接点受力特性的影响。该文的研究成果可为事故荷载作用时超大型浮体连接器结构设计和强度计算提供一定依据。 相似文献
9.
采用作者们(2007)提出的函数展开法描述箱式超大型浮体漂浮在不平底部海域中的水弹性响应问题.将速度势沿静水面位置展开,其系数是水平位置的函数.根据速度势满足拉普拉斯方程就可将这些系数简化到只有两个未知函数.海底条件和平板动力学方程或联合的自由面条件可以分别在Ⅰ区和Ⅱ区建立两个方程用于确定这两个未知函数.不同区域的解要在公共界面上进行匹配.在求解水弹性问题时,展开法必须要截断,从原理上来说,保留的项数越多,其解可以适用于更高阶的kh,其中k是波数,h是水深.作为一个例子,文中给出了只保留一项的结果,而这正好是人们所熟悉的浅水方程. 相似文献
10.
箱式超大型浮体水弹性分析的弹性地基梁法 总被引:2,自引:0,他引:2
如何快速而精确地估计箱式超大型浮体在波浪中的水弹性响应是设计中需要解决的一个重要问题。在所提出的各种简化分析方法中,弹性地基梁模型是最简单的。本文选择了四种弹性地基梁模型进行比较研究。它们分别称为S_Y_BOEF,T_BOEF,S_BOEF和A_BOEF模型。通过研究发现,由Suzuki和Yoshida提出的S_Y_BOEF模型显得太保守而不适合于实际应用,而其它三种模型是能够合理地估计箱式超大型浮体的水弹性响应的。相比而言,由S_BOEF模型延伸出的A_BOEF模型从概念上的一致性和精度方面都是最好的。弹性地基梁模型的最大优点是简单,可以很方便地在工程设计中应用。 相似文献
11.
12.
13.
14.
The water entry problem of an asymmetric wedge with roll motion was analyzed by the method of a modified Logvinovich model (MLM). The MLM is a kind of analytical model based on the Wagner method, which linearizes the free surface condition and body boundary condition. The difference is that the MLM applies a nonlinear Bernoulli equation to obtain pressure distribution, which has been proven to be helpful to enhance the accuracy of hydrodynamic loads. The Wagner condition in this paper was generalized to solve the problem of the water entry of a wedge body with rotational velocity. The comparison of wet width between the MLM and a fully nonlinear numerical approach was given, and they agree well with each other. The effect of angular velocity on the hydrodynamic loads of a wedge body was investigated. 相似文献
15.
16.
CHEN Han-bao 《水道港口》2010,31(5):323-323
With the advantages on rapid construction,no limitation of extent,less influence on environment, the VLFS has been turned into the focus of coastal and offshore engineering studying.As the platform,VLFS was built as airport,huge oil house etc,and would play the role of ocean economics,politics and military.The restrictive condition of VLFS is strong wave by monsoon,seismic,serious bomb etc.The floating breakwater should be put forward to shelter VLFS.The analysis of wave condition including typhoon route,archipelago and water depth is performed in this paper.The advantage and disadvantage are compared between VLFS and the marine structure from land. 相似文献
17.
The transient elastic deformation of a pontoon-type very large floating structure (VLFS) caused by the landing and take-off of an airplane is computed by the time-domain mode-expansion method. The memory effects in hydrodynamic forces are taken into account, and great care is paid to numerical accuracy in evaluating all the coefficients appearing in the simultaneous differential equations for the elastic motion of a VLFS. The time-histories of the imparted force and the position and velocity of an airplane during landing and take-off are modeled with data from a Boeing 747-400 jumbo jet. Simulation results are shown of 3-D structural waves on a VLFS and the associated unsteady drag force on an airplane, which is of engineering importance, particularly during take-off. The results for landing show that the airplane moves faster than the structural waves generated in the early stage, and the waves overtake the airplane as its speed decreases to zero. The results for take-off are essentially the same as those for landing, except that the structural waves develop slowly in the early stage, and no obstacle exists on the runway after the take-off of airplane. The additional drag force on an airplane due to the elastic responses of the runway considered in this work was found to be small in magnitude. 相似文献
18.
19.
《舰船科学技术》2015,(9)
以极大型浮式结构的单模块为研究对象,采用大型通用有限元软件Ansys/AQWA进行极大型浮体水动力响应分析并预报波浪载荷,进而调用ASAS模块进行极大型浮体总体强度分析。分析结果表明:极大型浮体3个连接部位,即横撑与下浮体围壁连接处,立柱外壳与上箱体底板连接处和立柱外壳与下浮体外板连接处出现了较大的应力集中,其中横撑与下浮体围壁连接处的应力值可能已超过许用应力。因此,对横撑与下浮体围壁连接处进行结构加强,采用Ansys/AQWA对结构改进后的极大型浮体进行总体强度分析,并与改进前的结果进行对比。从对比结果可知:通过结构的改进和加强,横撑与下浮体连接处的Von Mises应力普遍下降。本文的研究成果将为极大型浮体后续的疲劳分析提供重要的理论基础。 相似文献