船舶横摇运动中的混沌及其非线性简捷控制

为了描述并控制船舶横摇运动中的非线性随机现象,用混沌的Duffing方程刻画船舶横摇运动的非线性现象,符合程度较好,说明船舶在海浪作用下的运动在一定条件下可能产生混沌现象。采用精确反馈线性化和闭环增益成形算法相结合的非线性简捷控制方法控制船舶横摇运动中的混沌,取得了令人满意的控制效果,仿真结果验证了所设计的控制器具有良好的鲁棒性。     

基于随机Melnikov方法的甲板上浪船舶混沌运动研究

应用随机Melnikov方法和庞加莱截面研究甲板上浪时船舶的混沌运动。考虑甲板上浪对船舶静稳性的影响,建立随机横浪中船舶横摇运动方程。由随机Melnikov过程结合均方准则确定船舶产生混沌运动的参数域,计算不同参数域中船舶横摇响应的庞加莱截面和时间历程。结果表明,增加船舶阻尼将抑制混沌运动的发生。甲板上浪时船舶横摇响应的庞加莱截面上有两个吸引域,船舶运动过程有两个横摇中心。在非混沌参数域中,船舶只围绕其中的一个横摇中心运动;在混沌参数域中,发生由一个横摇中心到另一个横摇中心的随机跳跃。     

规则纵浪中船舶参数激励横摇运动研究

考虑船舶横摇运动中恢复力矩及阻尼力矩的非线性,建立船舶在规则波浪中参数激励下的非线性横摇运动方程,并对规则纵浪中船舶参数激励横摇运动进行研究,探讨船舶发生参数激励横摇运动的条件及大幅横摇的动力学特征,分析船速、波高及波长等因素对参数激励横摇运动的影响。     

船舶在横浪中的横摇运动及其稳定性研究

以规则横波下的船舶稳定性为研究对象,对船舶在横浪中的横摇运动及其稳定性进行深入研究。本文首先描述船舶横摇运动的非线性方程的建立方法,然后对横浪中船舶的横摇运动稳定性进行分析。分别介绍基于Lyapunov指数法的船舶混沌状态识别方法和基于Melnikov数值积分法的船舶全局稳定性分析方法。仿真实验结果表明,本文介绍的方法能够更好地了解不同激励下船舶的运动状态,稳定性判断方法具有很高的正确性。     

随机斜浪中船舶参数-强迫激励横摇运动计算

研究船舶随机斜浪中大幅参数激励非线性横摇运动的计算方法.将船舶稳性高度GM作为时域变化的随机参数激励,波浪力为随机强迫激励项,建立船舶在随机斜浪航行情况的参-强激励横摇运动微分方程.参数激励项的求解考虑了船体型线、纵摇、升沉及波浪运动对稳性高度变化的影响.分别取不同波高、航速、航向,计算出随机斜浪中船舶的时域横摇运动响应.计算结果表明,此方法可以用于计算随机斜浪中船舶的参-强激励横摇运动,据此分析随机斜浪对船舶横摇和倾覆的重要影响.     

随机斜浪中船舶参数——强迫激励横摇运动计算

研究船舶随机斜浪中大幅参数激励非线性横摇运动的计算方法。将船舶稳性高度GM作为时域变化的随机参数激励，波浪力为随机强迫激励项，建立船舶在随机斜浪航行情况的参—强激励横摇运动微分方程。参数激励项的求解考虑了船体型线、纵摇、升沉及波浪运动对稳性高度变化的影响。分别取不同波高、航速、航向，计算出随机斜浪中船舶的时域横摇运动响应。计算结果表明，此方法可以用于计算随机斜浪中船舶的参—强激励横摇运动，据此分析随机斜浪对船舶横摇和倾覆的重要影响。     

规则纵浪中船舶参数激励横摇运动的鲁棒控制

为有效控制船舶在参数横摇运动中的失稳状态,根据规则纵浪中船舶参数横摇系统的非线性数学模型,设计了一种具有鲁棒性的非线性控制器.采用精确反馈线性化方法将纵浪中船舶参数横摇系统的非线性模型线性化,然后用闭环增益成形算法设计出非线性鲁棒控制器.在考虑不同的干扰和模型摄动情况后进行了仿真试验.仿真结果表明该控制策略对于船舶参数横摇系统十分有效,且鲁棒性能令人满意.算法的设计过程简单,物理意义明显.     

船舶非线性横摇运动分析的Lyapunov特性指数法

将Lyapunov特性指数用于船舶非线性横摇运动稳定性分析,阐述了Lyapunov特性指数的计算方法.将Lyapunov特性指数作为船舶非线性运动混沌态的判据,给出了Lyapunov特性指数与船舶运动状态之间的关系,通过仿真试验验证了该算法的有效性,并进一步采用Lyapunov特性指数精确寻求船舶非线性横摇运动的阈值,分析了船舶非线性横摇运动的全局稳定性.     

甲板上浪时船舶在横浪中的随机跳跃

基于概率理论和非线性动力学方法研究随机横浪中甲板上浪船舶的随机跳跃.应用随机Melnikov均方准则初步划分了船舶发生随机跳跃的参数区域后,由路径积分法求解横摇运动微分方程,得到船舶横摇响应的联合概率密度函数.通过概率密度函数的形状和庞加莱截面判定船舶横摇运动的随机跳跃,并由时间历程进一步验证了结论的可靠性.研究表明,有甲板上浪时船舶横摇响应的联合概率密度函数有两个峰,船舶运动过程有两个可能的横摇状态.在非混沌参数区域中,这两个峰不相通,船舶运动只实现其中的一个状态而不发生跳跃.在混沌参数域中,当波浪激励达到一定强度时,这两个峰相通,船舶运动在这两个状态间随机跳跃,这将引发船舶的不稳定运动甚至导致倾覆.     

船舶参数激励非线性随机横摇运动分析

研究了随机纵浪中船舶的参数激励横摇运动。将船舶初稳性高作为时变的随机参数激励,应用随机平均法和FPK方程,分析了船舶的参数激励横摇运动微分方程。考虑航速、船舶瞬时湿表面积及随机波浪,建立了船舶横摇幅值概率密度、概率分布函数及其均值的计算方法。以某渔政船为例,计算了不同航速时船舶随机横摇幅值的概率密度、概率分布函数及其均值。结果表明,参数激励谱峰频率为横摇固有频率的2倍时,发生主参数共振,船舶横摇严重,船舶倾覆发生的概率增加。     

33rd International Conference on Ocean,Offshore and Arctic Engineering （OMAE2014）

正San Francisco,California,June 8-13,2014.OMAE 2014 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to:·meet and present advances in technology and its scientific support;·to exchange ideas and experiences whilst promoting technological progress and its application in industry·to promote international cooperation in ocean,offshore and arctic engineering.In line with the tradition of excellence of previous OMAE conferences,more than 900 technical papers are planned for presentation.Outreach for Engineers Specialty Forum This Specialty Forum is designed for students and professionals who may not be familiar with the Ocean and Offshore industry,as well as those who have just recently specialized in this field.     

第十二届深水操作会议和展览会(英文)

正November 4-6,2014Moody Gardens HotelConvention Center/Galveston,TX The Deepwater Operations Conference and Exhibition is celebrating its 12th anniversary this year.This growing event will continue the tradition of excellence in addressing operational challenges involved in developing deepwater resources.We will return to the Moody Gardens Hotel and Convention Center on November 5-7,2014 in Galveston,Texas.     

The 11th International Conference on Hydrodynamics (ICHD 2014)

正19–24 October 2014 SingaporeCONFERENCE THEMES The overall aim of the ICHD Conference is to provide a forum for participants from around the world to review,discuss and present the latest developments in the broad discipline of hydrodynamics and fluid mechanics.The first International Conference on Hydrodynamics(ICHD)was initiated in 1994 in Wuxi,China.Since then,9 more ICHD conferences were held subsequently in Hong Kong,Seoul,Yokohama,Tainan,Perth,Ischia,Nantes,Shanghai and St Petersburg.Evidently the ICHD conference has become an important event among academics,researchers,engineers and operators,working in the fields closely related to the science and technology of hydrodynamics.The 11th ICHD will be held in Singapore in 2014.     

Catalyzing Coastal Management in Kenya and Zanzibar: Building Capacity and Commitment

Site-based projects were initiated in Chawka Bay-Paje, Zanzibar, and Nyali-Bamburi-Shanzu, Kenya, to demonstrate the benefits of an integrated coastal management (ICM) approach for addressing coastal issues such as tourism development and enhancement of resource-dependent village economies in eastern Africa. A two-year, multidonor project used three primary strategies to make rapid, but sustainable, progress toward ICM. These included using interagency government teams for ICM planning, adopting an internationally recognized framework for ICM as a project ''road map,'' and explicitly incorporating capacity-building strategies into all aspects of the project. Within two years, integrated ICM action strategies, prepared through participatory processes, were being implemented at both sites, and both teams were working to expand the scale and scope of ICM in their nation. More importantly, the project helped create committed, capable, interagency groups that continue to work together to address urgent ICM issues.     

舰艇反鱼雷技术

对目前舰艇反鱼雷技术中的非杀伤、软杀伤和硬杀伤等比较先进的手段进行了阐述,并在此基础上分析研究了舰艇反鱼雷技术的发展趋势。     

A simplified method for reliability- and integrity-based design of engineering systems and its application to offshore mooring systems

This paper presents a simplified method for the reliability- and the integrity-based optimal design of engineering systems and its application to offshore mooring systems. The design of structural systems is transitioning from the conventional methods, which are based on factors of safety, to more advanced methods, which require calculation of the failure probability of the designed system for each project. Using factors of safety to account for the uncertainties in the capacity (strength) or demands can lead to systems with different reliabilities. This is because the number and arrangement of components in each system and the correlation of their responses could be different, which could affect the system reliability. The generic factors of safety that are specified at the component level do not account for such differences. Still, using factors of safety, as a measure of system safety, is preferred by many engineers because of the simplicity in their application. The aim of this paper is to provide a simplified method for design of engineering systems that directly involves the system annual failure probability as a measure of system safety, concerning system strength limit state. In this method, using results of conventional deterministic analysis, the optimality factors for an integrity-based optimal design are used instead of generic safety factors to assure the system safety. The optimality factors, which estimate the necessary change in average component capacities, are computed especially for each component and a target system annual probability of system failure using regression models that estimate the effect of short and long term extreme events on structural response. Because in practice, it is convenient to use the return period as a measure to quantify the likelihood of extreme events, the regression model in this paper is a relationship between the component demands and the annual probability density function corresponding to every return period. This method accounts for the uncertainties in the environmental loads and structural capacities, and identifies the target mean capacity of each component for maximizing its integrity and meeting the reliability requirement. In addition, because various failure modes in a structural system can lead to different consequences (including damage costs), a method is introduced to compute optimality factors for designated failure modes. By calculating the probability of system failure, this method can be used for risk-based decision-making that considers the failure costs and consequences. The proposed method can also be used on existing structures to identify the riskiest components as part of inspection and improvement planning. The proposed method is discussed and illustrated considering offshore mooring systems. However, the method is general and applicable also to other engineering systems. In the case study of this paper, the method is first used to quantify the reliability of a mooring system, then this design is revised to meet the DNV recommended annual probability of failure and for maximizing system integrity as well as for a designated failure mode in which the anchor chains are the first components to fail in the system.     

Community-Based Management for Sustainable Fisheries Resources in Phang-nga Bay,Thailand

Fishing communities, the Government of Thailand Department of Fisheries, local nongovermnental organizations, universities, the Food and Agriculture Organization of the United Nations (FAO), and FAO's Bay of Bengal Program have undertaken a partnership in management of Phang-nga Bay's coastal resources. It is the first project of its kind in Thailand, and although still in the early stages, offers insights that may contribute to our knowledge of how we can improve our management of coastal resources, including the importance of (1) building relationships within the governance process; (2) combining education, enforcement, and economic incentives to achieve compliance; (3) implementing solutions early; and (4) government support of community-based decisions. These insights reinforce trends emerging in other coastal management projects in the Asian region.     

含裂纹钢板复合材料修补强度和刚度数值分析

用ANSYS有限元分析软件对复合材料补片修复含边裂纹和中心裂纹钢板的强度和刚度进行了数值分析.引入相对刚度的概念,研究了钻有止裂孔裂纹的长度对损伤钢板相对刚度的影响,分析了损伤钢板刚度复合材料贴片修补效果;引入屈服载荷提高率的概念,分析了损伤钢板强度的修复效果.     

混凝土道路、堆场面层裂缝的产生与防治

从混凝土道路、堆场的各个结构层分析裂缝产生的原因,并针对性地说明预防措施,阐述裂缝维修方法。     

单相PWM整流器的建模与仿真分析

文章详细分析了单相VSR型PWM整流器的整流原理,建立了电流内环,电压外环的单相VSR型PWM整流控制器的数学模型和逻辑框图。在MATLAB／Simulink软件环境中进行了仿真,分析了模型的可行性。