REGULATION OF PRODUCTION OF PARATHYROID HORMONE－RELATED PEPTIDE （PTHrP） AND EXPRESSION OF ITS mRNA IN A HUMANLIVER－DERIVED CE

ＲＥＧＵＬＡＴＩＯＮＯＦＰＲＯＤＵＣＴＩＯＮＯＦＰＡＲＡＴＨＹＲＯＩＤＨＯＲＭＯＮＥ－ＲＥＬＡＴＥＤＰＥＰＴＩＤＥ（ＰＴＨｒＰ）ＡＮＤＥＸＰＲＥＳＳＩＯＮＯＦＩＴＳｍＲＮＡＩＮＡＨＵＭＡＮＬＩＶＥＲ－ＤＥＲＩＶＥＤＣＥＬＬＬＩＮＥＬｉＨｕｓｏｎｇ；Ｐ...     

The stability of stochastic equilibrium in a two-link transportation network

Most research and applications of network equilibrium models are based on the assumption that traffic volumes on roadways are virtually certain to be at or near their equilibrium values if the equilibrium volumes exist and are unique. However, it has long been known that this assumption can be violated in deterministic models. This paper presents an investigation of the stability of stochastic equilibrium in a two-link network. The stability of deterministic equilibrium also is discussed briefly. Equilibrium is defined to be stable if it is unique and the link volumes converge over time to their equilibrium values regardless of the initial conditions. Three models of route choice decision-making over time are formulated, and the stability of equilibrium is investigated for each. It is shown that even when equilibrium is unique, link volumes may converge to their equilibrium values, oscillate about equilibrium perpetually, or converge to values that may be considerably different from the equilibrium ones, depending on the details of the route choice decision-making process. Moreover, even when convergence of link volumes to equilibrium is assured, the convergence may be too slow to justify the standard assumption that these volumes are usually at or near their equilibrium values. When link volumes converge to non-equilibrium values, the levels at which the volumes stabilize typically depend on the initial link volumes or perceptions of travel costs. Conditions sufficient to assure convergence to equilibrium in two of the three models of route choice decision-making are presented, and these conditions are interpreted in terms of the route choice decision-making process.     

融合可持续理念的交通规划方案比选方法——以亚特兰大大都市区为例

越来越多的机构开始为交通系统的可持续发展定义,并试图将这一概念融入区域交通规划过程.然而,只有极少数的区域规划机构意识到了交通系统和土地利用变化给经济、环境和社会生活质量(这三者通常被认为是可持续交通系统的三个基本方面)带来的广泛影响.首先,论述了使用多个可持续发展指标的多准则决策方法,并应用其评估亚特兰大大都市区的三...     

Inventory,Classification, and Analysis of Special Management Areas Associated with U.S. Coastal Programs

Area-based management approaches may be beneficial in integrating sectoral, single-purpose laws and regulations; however, these benefits may not be attained if special area designations are equally sectoral or single-purpose in nature. Over 60 types of special management areas were documented under U.S. coastal programs, and a new classification scheme was developed to allow comparisons and analyses across programs. Results indicate that requirements and incentives for special area designations under the Coastal Zone Management Act did little to standardize or influence area-based management systems associated with state and territory coastal programs. Further, the absence of clear patterns within and between coastal programs with respect to special area policies suggests a limited commitment to this important aspect of coastal management. Continued research is needed to document the effectiveness of the various area-based management approaches presented in this article.     

Model-based analysis of the mechanical subsystem of an air brake system

Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.     

Cycle-simulation turbulence modelling of IC engines

Numerical simulations of IC engines are of high interest for automotive engineers worldwide. The simulation models should be as fast as possible, low-computational effort and predictive tool. The correct prediction of turbulence level inside the combustion chamber of spark ignition engines is the most important factor influencing to the engine working cycle. This paper presents a development of the k-ε turbulence model applied to the commercial cycle-simulation software with the high emphasis on the intake part. The validation was performed on two engine geometries with the variation of engine speed and load comparing the cycle-simulation results of the turbulent kinetic energy and in-cylinder temperature with 3-D CFD results. In order to apply the cycle-simulation turbulence model for the simulation of entire engine map, the parameterization model of turbulence constants was proposed. The parameterized turbulence model was optimized using NLPQL optimization algorithm where the single set of turbulence model parameters for each engine was found. A good agreement of the turbulent kinetic energy during the expansion was achieved when the turbulence affects the flame front propagation and combustion rate as well.     

Origin–destination table disaggregation using biproportional least squares estimation

This paper describes a group of techniques for disaggregating origin–destination tables for travel forecasting that makes explicit use of observed traffic on a network. Five models within the group are presented, each of which uses nonlinear least-squares estimation to obtain row and column factors for splitting trip totals from and to larger geographical areas into smaller ones. The techniques are philosophically similar to Fratar factoring, although the solution method is quite different. The techniques are tested on a full-sized network for Northfield, MN and are found to work effectively.     

Evaluating the energy performance of a SUV hybrid electric vehicle

This paper analyzes the energetic performance of the hybrid Lexus RX 400h, through on-board measurements. Several speed profiles were analyzed, for three driving types, successive stop and go cycles, three speed profiles, crossing an electronic toll collection booth, and a roundabout. In stop and go situations the internal combustion engine did not work (the torque needed to impulse the vehicle in the stop and go situations was only supported by the electric engines), as well as in the situations of constant low speeds (50 or 60 km h^?1). The auxiliary support given by the electric engines in the accelerations, as well as the importance of the energy regeneration system on the batteries’ load recovery is also demonstrated. When compared with similar conventional vehicles, the Lexus RX 400h has lower combined energy consumption between 1.2% and 60%.