A dynamic analysis of person and household activity and travel patterns using data from the first two waves in the Puget Sound Transportation Panel

Daily activity participation and travel patterns are examined using data from the Puget Sound Transportation Panel (PSTP), which contains two-pairs of daily travel diary information (wave 1 in 1989 and wave 2 in 1990). Summary data of the travel diaries at the person and household levels are obtained using cluster analysis. At the person level, four clusters are found reasonable for both activity and travel. The four-cluster solutions indicate substantial day-to-day variation in activity participation and similarity in travel behavior over time. Temporal changes are analyzed using contingency table methods and log-linear models. The analysis reveals that activity participation and mobility present many regularities over time. Transitions within each wave show strong dependence between two days for both activity and travel, with higher dependency for the travel patterns than for the activity patterns. These are consistent when the analysis focuses on a longer period such as a year. Temporal dependencies appear to be stronger in the household-based than the person-based analysis. A hierarchical structure is also found in the relationship between activity and travel clusters. The link between activity and travel is much stronger within a day, weaker from one day to another, and the least strong from one year to the next. Important irregularities, however, are found and may be due to scheduling time-frames adopted by the respondents that are only partially captured in the data used.     

Design and Evaluation of Robust Cooperative Adaptive Cruise Control Systems in Parameter Space

This paper is on the design of cooperative adaptive cruise control systems for automated driving of platoons of vehicles in the longitudinal direction. Longitudinal models of vehicles with simple dynamics, an uncertain first order time constant and vehicle to vehicle communication with a communication delay are used in the vehicle modeling. A robust parameter space approach is developed and applied to the design of the cooperative adaptive cruise control system. D-stability is chosen as the robust performance goal and the feedback PD controller is designed in controller parameter space to achieve this D-stability goal for a range of possible longitudinal dynamics time constants and different values of time gap. Preceding vehicle acceleration is sent to the ego vehicle using vehicle to vehicle communication and a feedforward controller is used in this inter-vehicle loop to improve performance. Simulation results of an eight vehicle platoon of heterogeneous vehicles are presented and evaluated to demonstrate the efficiency of the proposed design method. Also, the proposed method is compared with a benchmark controller and the feedback only controller. Time gap regulation and string stability are used to assess performance and the effect of the vehicle to vehicle communication frequency on control system performance is also investigated.     

Characteristics of flame kernal radius in a spark ignition engine according to the electric spark ignition energy

To study flame propagation in a spark ignition engine, it must concentrate on the initial combustion stage, i.e., the formation and development of flame. Therefore, we must study the theoretical calculation of minimum flame kernel radius which affects the formation and development of flame kernel. To calculate the minimum flame kernel radius, we must know the thermal conductivity, flame temperature, laminar burning velocity, etc. To evaluate the accuracy of the minimum flame kernel radius based on the theory, authors compared with those from calculation and those from tests. According to the increase of number of sparks and spark intervals, the flame kernel radii become to increase and the expected lean limits are extended. It is considered that is due to the stability of combustion as increase of flame kernel size according as high ignition energy supplies in initial period and discharge energy period lengthens.     

Parallel model based fault detection algorithm for electronic parking brake system

This paper describes a parallel model-based fault detection algorithm for an electronic parking brake (EPB) system, which consists of an electronic control unit with built-in current sensor and braking force sensor. For the EPB system to supply sufficient parking force to a vehicle, the parking force sensor is of utmost importance. If a fault occurs in this sensor, sufficient parking force may not be supplied, thereby seriously threatening the safety of the vehicle. Thus, a fault detection method is required for the parking force sensor of the EPB system to improve the safety of vehicles. For this purpose, a highly reliable fault detection method is needed to detect abnormal fault signals, which cannot be detected by the existing on-line sensor monitoring fault detection methods. This paper proposes a novel parallel model-based fault detection algorithm for the EPB system, which compares the physical sensor data with the mathematical model, the fuzzy model, and the neural network model at the same time. In order to reduce false alarms, the magnitude of thresholds and the operation counts are changed adaptively. When the proposed parallel model-based fault detection algorithm detects severe failures of the force sensor, it warns the driver in advance to prevent accidents due to the failures. The proposed algorithm is verified by hardware-in-theloop simulations in various situations.     

In-situ measurement of loading stresses with X-ray diffraction for yield locus determination

The application of the X-ray diffraction method is introduced to solve the problem of inhomogeneous deformation fields in the specimens used for sheet metal characterization. In this method, strains are measured on one side of a specimen with optical measurement systems. On the other side, loading stresses on a specimen are captured with an X-ray diffractometer mounted on a universal testing machine. By this way, the whole stress-strain history of a material point is tracked during testing. The method was first applied to uniaxial tension tests, whereby the applicability of the theory of stress factors and effective X-ray elastic constants were tested. The relaxation behavior of a sheet material which shows itself as stress drops during in-situ experimentation was characterized and compensated by a visco-plastic material model for different stress states. The proposed method was applied to characterize aluminum alloy AA5182 under plane strain tension and shear conditions and the results were compared with the conventionally obtained yield locus. Numerical analyses of a workpiece with the Vegter and Yld2000-2D material models show that the enriched yield locus definition with accurate plane strain tension and shear stresses captures the experimentally obtained surface strains more precisely.     

Links between subjective assessments and objective metrics for steering

The characteristics of steering perception are decisive factors for overall driver preference and for vehicle safety. Car manufacturers are continuously required to tune the characteristics of the vehicle and have a strong need to be more effective in the design and evaluation of cars. Using only objective metrics (OM) can result in unwanted steering feel and using only subjective assessments (SA) is time-consuming, costly and non-repetitive. Before a tool can be built to predict the steering feel in front-end development and to improve design knowledge from the full vehicle level to the component level, links between subjective assessments and objective metrics must be found and analysed. The data collected for the study presented in this paper include subjective ratings from expert drivers and objective measurements made with steering robots, involving twelve expert drivers and over twenty vehicles across four different vehicle classes. Linear regression and neural network analysis (NN) have been used to explore reliable subjective-objective links. The tools and methods used in this research showed promising results. Most of the links found concern response and torque feedback. The preferred ranges of some crucial objective metrics leading to more desirable steering feel have been defined and presented. The results indicate that it would be possible for car manufacturers to develop new vehicles more effectively with a steering feel in line with the design criteria by using the tools and methods investigated in this paper.     

Method for precise controlling of the at shift control system

The shift comfort and efficiency of Automatic Transmission in vehicle are highly influenced by the pressure of the clutch shift control system, especially by the electro-hydraulic clutch subsystem. In this paper, the new design principles of electro-hydraulic clutch systems developed and modeled in detail, the clutch-to-clutch control system is analyzed in three time intervals: oil filled phase, changing phase of clutch torque and synchronous phase of clutch speed. The demand pressures for the engaged clutches calculated in each phase and is precisely built up by using fuzzy slide mode control, the time of hydraulic pressure building-up is very sensitive to the dither current in simulation. All control parameters are optimized by Cosimulation between software Simulink and SimulationX. Finally, the optimal algorithm of the clutch shift control is written into the transmission control unit of a testing vehicle. The testing results show that the suggested control strategy is effective.     

Minimizing vehicle post impact path lateral deviation using optimized braking and steering sequences

This paper investigates the optimal control of a vehicle, after a light impact during a traffic accident. To reduce the risk of secondary events, the control target is set: to minimize the maximum lateral deviation from the initial path. In previous analysis path control was achieved by the active control of individual wheel braking. The present paper examines potential benefits from the additional control of front steering angles. Numerical optimization is used to determine optimal control sequences for both actuator configurations. It is found that steering provides significant control benefits, though not for all post-impact kinematics. For all cases considered, the optimal control operates at the boundary of the control domain of available forces and moments. This domain is expanded when steering is available, and there exists an expanded range of conditions for which coupled control of yaw moments and lateral forces is the most effective control strategy. The sensitivity of vehicle response to the individual actuator controls is studied; it reveals this sensitivity is related to the actuator bandwidth and the lack of any dynamic cost in the longitudinal direction. This motivates a further analysis which includes longitudinal and lateral dynamics in the cost function. This is broadly related to real-world crash risks. Further, different versions of such cost functions are compared as a basis for implementation in a closed-loop controller.     

Rules for aggregated satisfaction with work commutes

In general trips frequently entail several stages varying in mode, duration, and other factors. In some way travelers aggregate their satisfaction with the stages to satisfaction with the whole trip. In this paper we address the question of how this aggregation is made. We use data from a Swedish survey measuring satisfaction with commutes to and from work and with the stages of the commutes. We test several aggregation rules for their goodness of fit to the observations. Our results show that a normatively correct averaging rule that takes into account the relative durations of the stages out-perform heuristic aggregation rules such as the peak-end, summation, and equal-weight averaging rules. We note that this does not exclude that the heuristic aggregation rules apply to other trips than repetitive commute trips.     

Inter-temporal variation in the travel time and travel cost parameters of transport models

The parameters for travel time and travel cost are central in travel demand forecasting models. Since valuation of infrastructure investments requires prediction of travel demand for future evaluation years, inter-temporal variation of the travel time and travel cost parameters is a key issue in forecasting. Using two identical stated choice experiments conducted among Swedish drivers with an interval of 13 years, 1994 and 2007, this paper estimates the inter-temporal variation in travel time and cost parameters (under the assumption that the variance of the error components of the indirect utility function is equal across the two datasets). It is found that the travel time parameter has remained constant over time but that the travel cost parameter has declined in real terms. The trend decline in the cost parameter can be entirely explained by higher average income level in the 2007 sample compared to the 1994 sample. The results support the recommendation to keep the travel time parameter constant over time in forecast models, but to deflate the travel cost parameter with the forecasted income increase among travellers and the relevant income elasticity of the cost parameter. Evidence from this study further suggests that the inter-temporal and the cross-sectional income elasticities of the cost parameter are equal. The average elasticity is found to be ?0.8 to ?0.9 in the present sample of drivers, and the elasticity is found to increase with the real income level, both in the cross-section and over time.