Simulation of city bus performance based on actual urban driving cycle in China

This paper establishes the simulation model of a city bus on the basis of the EQ6110 bus prototype and its experimental data. According to the actual urban driving cycle, the fuel economy and the traction performance of the EQ6110 city bus have been simulated, and factors such as the driving cycle, the loss of power to engine accessories, the gear-shifting strategy, the fuel shut-off strategy of the engine, etc., which influence on the bus’s fuel economy, are also quantitatively analyzed. Some conclusions are drawn as follows: (1) driving cycles have a great influence on the fuel economy of a city bus; (2) under the typical urban driving cycle of the public bus in China, the engine fuel shut-off strategy can save about 1 to 1.5 percent of the fuel consumption; and (3) the optimized gear-shifting rules can save 6.7 percent of the fuel consumption. Experimental results verify that the fuel economy for the EQ6110 public bus is improved by 7.2 pecent over the actual Wuhan urban driving cycle of the current public bus in China.     

Lane-following method for high speed autonomous vehicles

This paper presents a steering control method for lane-following in a vehicle using an image sensor. With each image frame acquired from the sensor, the steering control method determines target position and direction, and constructs a travel path from the current position to the target position either as an Arc-path or S-path. The steering angle is calculated from the travel path thus generated, and the vehicle follows the travel path via motor-control. The method was tested using a vehicle dubbed as KAV (Korea Autonomous Vehicle) along an expressway (Seoul Inner Beltway) trajectory with a variety of radii (50 m ∼ 300 m) while traveling at a speed of 60 km/h to 80 km/h. Compared with an experienced human driver, the method showed little much difference in performance in terms of lane-center deviation. The proposed method is currently employed for high speed autonomous driving as well as for stop and go traffic.     

Distributed support modelling for vertical track dynamic analysis

The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the ‘pinned–pinned’ vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.     

垂直及斜出水流场的二维及三维TR-PIV试验

本文对钝头回转体垂直及斜出水流场采用TR-(Time-Resolved)PIV技术进行测量,并对斜出水流场进行3D-Stereo PIV(三维体视 PIV)测量.文中介绍了测试技术及测量结果,揭示了出水过程中流动结构及其演变,展示了TR-PIV技术对具有瞬态历程特征的出水流场研究的适应性.     

RMS Values of Force, Stroke and Tyre Deflection in a Half-Car Model with Preview Controlled Active Suspension

Summary Matrix expressions are developed for the direct computation of rms values for the optimal control forces, front and rear suspension strokes and dynamic tyre deflections in a half-car model on a random road of given roughness. A quadratic performance index is employed with assumed weighting factors and evaluated in the same computation.     

处于十字路口的尼日利亚航运和造船修理业

从上世纪90年代早期到目前为止,尼日利亚联邦政府并没对航运业和造船修理业投入太多精力。一个典型例子就是,由于对这些行业不够重视导致了前尼日利亚国家货运公司（NNSL）的衰败及倒闭。1996年,尼日利亚联合货运公司（NUL）成立。但新公司的成立并     

The strategic transportation research study — Its origins and purposes

The highway industry in the United States spends about $35 to $40 billion annually. Management of the industry is almost wholly decentralized. This decentralization plus diminishing fuel tax revenues used to finance road improvements have caused road research efforts to decline to a very low level. Comparisons between funds for highway research and those spent by private firms in similar industries show that private firms spend from 5 to 12 times the rate of highway agencies. The problem of how much to spend on research is difficult both for private-sector and for public-sector enterprises. The level of research spending is shown to correlate well with both profitability and growth in U.S. firms. Four methods used for making research decisions in the private sector are discussed. The goals of the Strategic Transportation Research Study (STRS), which is being conducted by the Transportation Research Board to examine highway and transportation needs, are described.     

The changing structure of the UK port industry and its impact on stevedoring costs

This paper examines the impact the changing maritime technology has had on the structure and development of the UK port transport industry. In particular, it describes the major institutional changes that have occured in response to technological and other developments and the influence these have had on the cost structure of individual stevedoring operators. Finally, it describes the resultant pricing policies adopted by stevedores and concludes that these have been exacerbated by the failure of successive governments to adopt sound and consistent policies towards the industry.