Effect of fatigue strain range on properties of high-strength structural steel

Ship hulls are built with stiffened steel plates and experience continuous fatigue load cycles when in service. Mechanical properties of the steel are expected to change due to the application of these cyclic loads. Therefore, the mechanical properties of the material at various levels of fatigue damage need to be understood. This paper presents two test series that were conducted to determine the effect of two different strain ranges (2000 and 3000 micro strains) of fatigue cycles on the mechanical properties of high-strength structural steel. The test results indicate that the cycle-dependent behaviours of the material can cause a slight increase or a significant decrease in the yield strength when compared to its virgin state. However, the ductility of the steel does not change much as the strain cycle increases.     

Effects of information in road transport networks with recurrent congestion

This paper aims to gain more insight into the implications of information provision to drivers on the performance of road transport networks with recurrent congestion. For this purpose, a simulation program consisting of three components has been written. The first component is the traffic simulation model, the second component is the information provision mechanism, and the third component monitors the behavioural decision-making process of the drivers, which is modelled using a utility-based satisficing principle. Three types of information provision mechanisms will be considered: information based upon own-experience, after-trip information and real-time en route information. The findings in this paper, obtained in a hypothetical context, underline the important relationship betweenoverreaction, thelevel of market penetration and thequality of the information. High quality information allows a high level of market penetration, while low quality information, even when provided at low levels of market penetration, induces overreaction. Furthermore, real-time en route information is in particular beneficial during the process leading to a steady state; it reduces the variance in travel time considerably. The paper concludes with a discussion on the market potential of motorist information systems when commercially marketed.     

Wave impact on a horizontal elastic plate

The objective is to find slamming-induced local stresses in the steel or aluminum wetdeck of a multihull vessel. This is studied theoretically by representing the wetdeck as a beam model and accounting for dynamic hydroelastic effects. Two numerical methods are used, one being a simplified asymptotic solution. Satisfactory agreement between the two methods is reported. Experimental drop tests of horizontal elastic plates of steel and aluminum are also reported, and the results from the experiments agree well with the numerical computations. This study reveals, both numerically and experimentally, that slamming-induced local stresses are strongly influenced by dynamic hydroelastic effects. The maximum bending stresses are insensitive to where waves hit, the curvature of the waves, and maximum pressures. Measured maximum pressures are very sensitive to external conditions, and cannot be used as a measure of maximum local bending stresses. A simple procedure for local design stresses due to wetdeck slamming is outlined.     

The coastal edge of the Northeast Water polynya in spring 1993

Multidisciplinary, marine ecological observations were conducted at the shallow water edge of the Northeast Water in June, 1993. Although variable in size and shape, a small polynya was constantly present at Eskimonaes, at the fast-ice edge of Ingolfsfjord. A shallow stratified layer developed at the water sufface at negative water and air temperatures—an effect of sea ice melting in cold water early in the season. Nutrients were recorded in considerable quantities, although by mid July NO₃ had become depleted. The chlorophyll and phytoplankton maxima at 8–12 m depth had peak values of 2 mg chl a m⁻³, typical for Arctic algal blooms. The phytoplankton included over 90 species and was dominated by the Fragillariopsis group. Zooplankton was poor in biomass and density, but over 23 taxa were found, with the copepods Oithona similis and Pseudocalanus acuspes being numerically dominant. Sedimentation was approximately 0.2 g dry weight m⁻² d⁻¹ and suspended matter concentrations ranged from 4 to 19 mg l⁻¹. The benthos was represented by hard bottom forms only, with a surprisingly dense cover of macrophytes. Juvenile sea urchins (Strongylocentrotus droebachiensis), brittle stars (Ophiocten sericeum) and amphipods were dominant. Higher trophic levels were represented by benthic feeders, such as eiders and walruses. The area observed was more similar to high Arctic fjord ecosystems than to the offshore central Northeast Water polynya.     

Eddies around Madagascar — The retroflection re-considered

The Agulhas Current with its retroflection and attendant eddy-shedding is the cause of some of the greatest mesoscale variability in the ocean. This paper considers the area to the south and east of Madagascar, which provides some of the source waters of the Agulhas Current, and examines the propagating sea surface height signals in altimetry and output from a numerical model, OCCAM. Both show bands of variability along the axis of the East Madagascar Current (EMC) and along a zonal band near 25°S. Sequences of images plus associated temperature data suggest that a number of westward-propagating eddies are present in this zonal band. The paper then focuses on the region to the south of the island, where ocean colour and infra-red imagery are evocative of an East Madagascar Retroflection. The synthesis of data analysed in this paper, however, shows that remotely observed features in this area can be explained by anticyclonic eddies moving westward through the region, and this explanation is consistent with numerical model output and the trajectories of drifting buoys.     

Second-order perturbation added mass fluctuation on vertical vibration of tension leg platforms

Total motion in waves can be considered as a superposition of the motion of the body in still water and the forces on the restrained body. In this study the effect of added mass fluctuation on vertical vibration of tension leg platforms (TLP) in the case of vibration in still water for both free and forced vibration subjected to axial load at the top of the leg is presented. This effect is more important when the amplitude of vibration is large. Also this is important in fatigue life study of tethers. The structural model used here is very simple. Perturbation method is used to formulate and solve the problem. First- and second-order perturbations are used to solve the free and forced vibrations, respectively.     

Regional impacts of new transport infrastructure: a multisectoral potentials approach

This is the second of two background papers sponsored for the Symposium by the Administrative Commission for the north of the Netherlands. Its purpose is to provide an indication of the effects of the proposed high speed rail line between Amsterdam, Groningen and Hamburg on employment in the corridor. The authors first review the techniques of forecasting these effects discussed in the literature. The potentials approach is adopted for their analysis, the mathematics and underlying assumptions of which are presented. Finally, this model is run to provide an estimate of the impact on regional employment of three variants of the proposed rail line.     

Regulatory reform and freight mode choice

Reform of trucking Vehicle Weights and Dimensions (VWD) regulations in Canada is now underway. The effect these reforms will have on the freight transportation industry are only recently the subject of research. This paper is part of this new research effort, aimed at understanding how regulatory reform in the trucking sector will affect the existing competitive relationship between trucks and the railways. The paper presents the results of study and research into modelling the relationship between mode choice and the service characteristics that are affected by VWD reform.Using several periods of data, a series of econometric models are developed which help to elucidate the relative relationships between the mode service characteristics for both of the principal interprovincial freight modes. A technique is developed and presented to model railway user costs in order to overcome the complex and often unrepresentable pricing activities of Canadian railways.The strength of the developed econometric models is presented, including their significance and statistical reliability. This is further reinforced by the similarities exhibited by all the models in the series. The selected model is applied to predict market service responses required of the railway industry in order to compete with the trucking sector now adapting to the new regulations.The impact of the newly implemented vehicle weight and dimension reform on the rail transportation industry is analyzed and railway industry improvements aimed at maintaining its market share are presented. The results predicted by the model show that railway user cost reductions should be moderate, and likely less than the level of inflation over the period of time when trucking converts its fleet to take advantage of the new regulations.Abbreviations AASHTO American Association of State Highway and Transportation Officials - CCMTA Canadian Conference of Motor Transport Administrators - EPI End products, inedible commodity classification - GVW Gross Vehicle Weight - NA 1988 VWD National Agreement - RTAC Roads and Transportation Association of Canada - VWD Vehicle Weight(s) and Dimension(s) - WA 1988 VWD Western Agreement     

Active Roll Control of Single Unit Heavy Road Vehicles

Summary Strategies are investigated for controlling active anti-roll systems in single unit heavy road vehicles, so as to maximise roll stability. The achievable roll stability improvements that can be obtained by applying active anti-roll torques to truck suspensions are discussed. Active roll control strategies are developed, based on linear quadratic controllers. It is shown that an effective controller can be designed using the LQG approach, combined with the loop transfer recovery method to ensure adequate stability margins. A roll controller is designed for a torsionally flexible single unit vehicle, and the vehicle response to steady-state and transient cornering manoeuvres is simulated. It is concluded that roll stability can be improved by between 26% and 46% depending on the manoeuvre. Handling stability is also improved significantly.