Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Off-set crack propagation analysis under mixed mode loadings

An assessment was carried out herein to study the eccentricity of cracks subjected to mixed-mode loadings. Several loading locations relative to a central line were selected to induce mixed-mode loadings, which were computed using a finite element method. An adaptive meshing technique was adopted during the simulation of crack propagation to ensure the singularity of stress at the tip of the crack. The stress intensity failure criterion was used and programmed, and the node splitting technique was used when the stress intensity factor reached the fracture toughness of the material to simulate crack propagations. It was found that large variations in the stress intensity factor were observed when off-set cracks were used, and that K _II decreased when loading distance increased, but increased when the off-set crack distance was increased. Both crack eccentricity and loading distance played important roles in producing mixed-mode loading, compared to the influence of central cracks. Correction factors were introduced to modify the calculation of stress intensity factors under mixed-mode loadings. Simulations of crack propagation were also conducted to study the effects of crack eccentricities and loading distances. It was found that the crack length, the loading distance relative to the central crack and the crack eccentricity dominated calculations of the integrity of cracked structures.     

Development of a semi-empirical friction model in automotive driveshaft joints

High speed and sport utility vehicles with large joint articulation angle demand lower friction in automotive driveshaft joints to meet noise and vibration comfort levels. Thus a more thorough understanding of internal friction characteristics and mechanisms is required. In this paper, a friction model in automotive driveshaft joints was developed through the use of test data from an instrumented Constant Velocity (CV) joint friction apparatus with actual driveshaft assemblies. Experiments were conducted under different realistic operating conditions of oscillatory speeds, CV joint articulation angles, lubrication, and torque. The experimental data was used to develop a physics-based semi-empirical CV joint internal friction model as a function of different CV joint operating parameters. It was found that the proposed friction model captures the experimental results well. Also the friction model estimates the generated axial force (GAF) in tripod CV joints well, which is the main source of force that causes vehicle vibration problems.     

浙赣线提速路基基床承载力评估及加固措施

首先根据路基不同深度处的动应力衰减规律和浙赣线既有路基状况,提出了路床土强度控制条件为:基床表层0~0.3m和0.3~0.6m应分别满足160kPa和110kPa的承载力要求,并采用轻型动力触探(N10)对基床土承载力进行了检测和评估,结果表明,不满足基床土强度控制条件地段约占非改线全段的20%。其次,根据基床土承载力检测结果和基床土填料情况,提出了土工布封闭结合土工格室、换填的加固方法,而换填厚度取决于承载力大小和选取用的格室高度,为浙赣线200km/h提速改造提供了依据。     

大型落地镗铣床滑枕的有限元分析

通过三维软件建立了大型数控落地镗铣床滑枕的三维模型,利用有限元软件进行静力分析,计算了滑枕的应力和变形情况.通过模态分析,计算了滑枕1至4阶的固有频率和振型,得到滑枕动态特性,进而指导滑枕设计与优化.     

科技引领生态景观大道建设 创新打造未来城市名片

介绍了天津市滨海新区天津大道"绿色、生态、景观、环保、节能、和谐"的设计主题。从该工程的规划、设计,路基处理,路面材料,边沟设置,景观设计等方面阐述了工程的创新思想,并介绍了该工程绿色生态型城市快速路集成技术、城市快速路生态化设计技术集成、天津滨海新区城市快速路软土地基处理等科研课题的内容。     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.     

Model-based design of a variable nozzle turbocharger controller

Variable Nozzle Turbocharger (VNT) was invented to solve the problem of matching an ordinary turbocharger with an engine. VNT can harness exhaust energy more efficiently, enhance intake airflow response and reduce engine emissions, especially during transient operating conditions. The difficulty of VNT control lies in how to regulate the position of the nozzle at different engine working conditions. The control strategy designed in this study is a combination of a closed-loop feedback controller and an open-loop feed-forward controller. The gain-scheduled proportional-integral-derivative (PID) controller was implemented as the feedback controller to overcome the nonlinear characteristic. As it is difficult to tune the parameters of the gain-scheduled PID controller on an engine test bench, system identification was used to identify the plant model properties at different working points for a WP10 diesel engine on the test bench. The PID controller parameters were calculated based on the identified first-order-plus-dead-time (FOPDT) plant model. The joint simulation of the controller and the plant model was performed in Matlab/Simulink. The time-domain and frequency-domain performances of the entire system were evaluated. The designed VNT control system was verified with engine tests. The results indicated that the real boosting pressure traced the target boosting pressure well at different working conditions.     

Deflection test and transmission error measurement to identify hypoid gear whine noise

T-Hypoid gears are commonly used in rear-drive and 4WD (4 Wheel Drive) vehicle axles. Investigating their sensitivity to deflections is one of the most important aspects of their design and optimization procedures. Therefore, a deflection test was performed in this study in the actual gear mounting using completely processed gear. This test covered the full operating range of gear loads from “no load” to “peak load”. Under peak load, the contact pattern extended to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface. The transmission error was tested under an axle assembly triaxial-real-car-load condition.     

Development of a navigation algorithm with dead reckoning for unmanned ground vehicles

A navigation algorithm is indispensable for Unmanned Ground Vehicles (UGVs). During driving, UGVs follow a global path. In this study, we propose a navigation algorithm using Real Time Kinematic (RTK)-Differential Global Positioning System (DGPS) units and encoders to complement global path planning. Sometimes GPS systems lose their signals and receive inaccurate position data due to many factors, such as edifice and barrier obstructions. This paper shows that GPS deviations can be solved using a Dead Reckoning (DR) navigation method with encoders and that position errors can be decreased through the use of RTK-DGPS units. In addition to this method, we will introduce a new waypoint update algorithm and a steering algorithm using RTK-DGPS units.