Flash Action Script在航海教学中的应用

“航海学”课程教学中因缺少实践环节而导致部分知识点学生难以理解,提出采用Flash Action Script制作课件,以动画形式直观生动地化解教学难点,分析了课件制作当中几个关键技术问题,并提出解决方案。     

自动驾驶中座椅旋转速度对乘员的影响

为提高自动驾驶车辆的安全性,提出用一种旋转速度曲线把座椅旋转至指定角度,研究此旋转速度下的乘员生物力学响应.首先,根据所建立的碰撞模型与假人试验数据进行对比验证;其次,改变座椅旋转方向和速度研究乘员旋转至指定位置乘员的生物力学响应.结果表明:在200 ms内采用等腰梯形旋转速度曲线旋转至±45°和±90°不会引起乘员额...     

双电机耦合驱动电动汽车驱动模式划分与优化

为充分发挥一款双电机耦合驱动系统电动汽车(DMCP-EV)多驱动模式的节能优势,制定了基于系统效率最优的驱动模式控制策略。根据该双电机耦合驱动系统的结构特点,定义了电机4种驱动模式并分别建立其动力学驱动模型和系统效率模型。在满足动力性要求的前提下,分析并划分了各驱动模式的工作范围,以系统效率为优化目标,采用粒子群优化算法进行优化,获得最佳的驱动模式切换控制和转矩分配策略。开展了Matlab/Simulink仿真和硬件在环试验验证。结果表明,经系统效率优化的驱动模式在满足动力性要求的前提下,有效提高了双电机耦合驱动系统的经济性,能耗降低11%。     

Effects of passenger characteristics and terminal layout on airport retail revenue: an agent-based simulation approach

This paper examines the effect of passenger characteristics and terminal layout on airport retail revenue using an agent-based simulation approach. Simulation results show that passenger mix (that is, the mix of shopper types according to a typology of airport shoppers) has a profound effect on airport retail revenue; the larger the number of ‘shopping lovers’ there are among passengers, the higher the airport retail revenue. Results also reveal that group travel can lead to negative effects on retail in certain terminal layouts, and that the amount of free dwell time that a passenger has can affect spending due to less retail engagement. This paper shows a combined effect of passenger characteristics and terminal layout on airport retail revenue, and discusses the implications of these results for future airport terminal design that aims to maximise retail potential.     

进气道滚流比对发动机充气模型精度影响的试验研究

进气道结构是决定发动机缸内气体滚流强度的主要因素。针对一款直列四缸1.2 L增压直喷、DVVT汽油机,通过试验的方法,研究了发动机不同转速、负荷工况下,进气道滚流比参数对发动机进气状态和燃烧过程的影响,并对比了不同滚流比情况下的汽油机充气模型精度。研究结果表明,进气道滚流比对发动机的进气状态有显著影响。针对相同的ECU标定数据,滚流比的改变会造成充气模型精度较为明显的偏差。     

无人粮食转运车车身刚强度分析

因有限元分析方法的不断成熟,使分析所得的结果准确度大幅提高,从而降低了研究成本,缩短了研发周期。基于这些特点,将有限元分析方法应用于各类车的设计研究。文章通过无人粮食转运车的结构特点,对该无人粮食转运车在四种典型工况下的刚度和强度进行了计算,分析了粮食转运车在这四种工况下运行时的位移变形量的最大值和应力最大值及其出现的位置,所得结果为新车型的车身骨架提供数据化参考。     

桥墩拼装工法用新型预应力锚固体系的开发与应用

当前我国桥墩预制拼装工法应用越来越多,通过分析桥墩预制拼装工法中各种常用竖向预应力锚固体系的优缺点,提出了一种新型的、具有自锁功能的竖向预应力锚固体系。主要从该预应力锚固体系的研究背景、结构设计、试验研究、施工工艺研究和工程应用等方面进行阐述。研究和应用表明该新型预应力锚固体系锚固性能可靠、施工工艺简单、质量易保证、成本较低,能很好满足预制构件竖向拼装的需要,值得在工程中推广应用。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.