Tool for Predicting the Ultimate Bending Moment of Ship and Ship-Shaped Hull Girders

The present paper presents a historical review associated with the research works on hull girder strength of ship and ship-shaped structures. Then, a new program is developed to determine the ultimate vertical bending moment of hull girder by applying direct method, stress distribution method, and progressive collapse analysis method. Six ships and ship-shaped structures used in the benchmark study of International Ship and Offshore Structures Congress (ISSC) in 2012 are adopted as examples. The calculation results by applying the developed program are analyzed and compared with the existing results. Finally, the roles of the developed program and its further development are discussed.     

A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates

The present work investigates the compressive axial ultimate strength of fillet-welded steel-plated ship structures subjected to uniaxial compression, in which the residual stresses in the welded plates are calculated by a thermo-elasto-plastic finite element analysis that is used to fit an idealized model of residual stress distribution. The numerical results of ultimate strength based on the simplified model of residual stress show good agreement with those of various methods including the International Association of Classification Societies (IACS) Common Structural Rules (CSR), leading to the conclusion that the simplified model can be effectively used to represent the distribution of residual stresses in steel-plated structures in a wide range of engineering applications. It is concluded that the widths of the tension zones in the welded plates have a quasi-linear behavior with respect to the plate slenderness. The effect of residual stress on the axial strength of the stiffened plate is analyzed and discussed.     

Space enterprise strategy guiding-based study on project portfolio management and flow optimization

Project portfolio management (PPM) is the centralized management method, process and technology in multiple projects. When multiple projects in the space industry are implemented, it provides an effective methodology to resolve the problems at the same time such as conflicts among models, decrease in design efficiency, and increase in target deviation. Hence, a PPM dedicated to multiple projects management in space enterprise is presented in this paper. Firstly, an analysis of features and contents in space enterprise portfolio management mode is performed by using PPM based on its specific strategic characteristics. Then, the principle and selection methods of PPM are provided as a reference for the future development of an enterprise. Finally, a multiple-level organization architecture including decision making layers, function management layers and project execution layers is proposed so as to adapt to possible changes in the multiple projects and correspond to the strategic development. As a consequence, a perfect matching mechanism to fit the changes in PPM modes is reached. In addition, the flow chart of PPM is designed and optimized by analyzing the implementation procedure of strategic target and project portfolio life-cycle, which is expected to realize the purpose of improving space enterprise management efficiency, project management capacity, innovation development and economic benefits.     

纯电动汽车轻量化机舱支架总成优化与验证

为了满足纯电动汽车轻量化的需求,针对长安某纯电动汽车结构功能件机舱支架总成进行了复合材料轻量化开发,基于性能及成本因素选用了片状模塑料(sheet molding compound,SMC),对该SMC机舱支架总成进行了CAE分析及台架疲劳振动试验,根据试验分析结果进行了分析模型及结构优化,并对优化后的SMC机舱支架总成进行了试验验证.研究结果表明,悬挂重量对复合材料机舱支架总成的性能有较大影响,CAE建模应体现悬挂重量,分析模型及结构改进后的SMC机舱支架总成可以满足强度及疲劳耐久要求;相对于金属机舱支架总成,SMC部件可以实现2 kg,减重率为31.3％,轻量化效果明显,SMC部件成本相对于金属部件成本只增加20元,每公斤减重的成本为10元,成本增加可以接受,具有大批量应用前景;应用SMC复合材料,可以大量减少生产工序,取消焊接流程,能够明显降低能源消耗,同时降低了排放和资源消耗,符合国家节能环保政策,为纯电动车及汽车结构功能件轻量化开发提供了一个很好的方向.     

横浪海况下"蓝鲸"号起重船吊装上部组块运动响应研究

"蓝鲸"号起重船舶在海上吊装大型上部组块施工过程中,有时受现场条件限制,会出现横浪吊装作业工况,此时组块运动容易偏大,威胁作业的安全,甚至造成设备损坏和人员伤亡事故.本文针对横浪-系泊系统-起重船-吊缆-上部组块复杂耦合系统,开展了数值模拟研究工作,分析吊装组块的运动响应规律和特性.将规则波中运动响应预报结果与水池模型试验结果进行了对比分析,验证了数值模拟的合理性及其精确性,揭示了起重船和吊物的耦合运动机理.针对典型横浪不规则波工况,开展了运动响应预报,并和Noble Denton相关衡准进行了对比,给出了允许施工作业工况的建议.     

Effect of interference fits on the fatigue lives of bolted composite joints

The effect of interference fits on the fatigue lives of bolted composite joints is investigated by conducting mechanical tests. Static and fatigue tests are carried out on specimens made of carbon-bismaleimide composites joined together as double-lap single-bolt joints. The bolts having interference fits ranging of 0 (neat fit), 0.5%, 0.75% and 1% are performed. The results demonstrate the relationship between fatigue life and different values of interference fits. After the fatigue tests, non-destructive evaluation (NDE) and scanning electron microscope (SEM) are used to observe the damage of the surrender and surface of the hole. The test results show that the interference fitted specimens have improved fatigue life compared to the neat fitted specimen. The NDE and SEM results reveal that the damage degree of interference fitted specimen is weaker than that for the neat fitted one.     

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

New procedure for the analysis of speed trial results,with special attention to the correction of tidal current effect

Almost all the existing analysis methods of speed trial results were proposed before 1970s, and the actual analysis procedures are very old-fashioned with instructions like “plot the results on a chart and draw a smooth mean line”, “read a value from the mean line” and so on. Such instructions not only show up the analysis procedures old-fashioned, but also make them very ambiguous and unclear. They should be up-dated to a method which is clear not only in logic but also in calculation procedure, and also fits the present computing technology. At first, the author reviewed the major analysis methods and concluded that the logic of the up-dated analysis procedure can be composed of the logics of the existing ones. Then, the analysis procedure is composed of three stages; namely (1) correction of power and propeller revolution to the ones corresponding to no air condition, (2) correction of tidal current effect, and (3) correction of power and propeller revolution to the ones corresponding to no wind condition. For the stages (1) and (3), there seems to be no big issue except the estimation of the amount of environmentally added resistance in the stage (1). Then, the author focused on the correction of tidal current effect in this paper. For the correction of tidal current effect, the author considers the essential points for the up-date are in the direction of finding out appropriate functions for the variation of tidal current velocity and the ship speed through the water. Then, he investigated to find out such functions and made his proposal. Finally, the applicability of the new procedure is assessed by the analysis of simulated speed trial results of a VLCC.     

A finite pointset method for the numerical simulation of free surface flow around a ship

In this paper, we present a Finite pointset method (FPM) for the numerical simulation of free surface flow around a ship in calm water. It is a Lagrangian and meshless particle scheme which is applied to the projection method for the incompressible governing equations. This requires the solution of Poisson problems in each time step, so a moving least squares (MLS) interpolants is used for the spatial derivatives in order to discretize the Poisson equation with pressure-Dirichlet condition of free surface flow in meshless structure. Meanwhile, an additional problem of the periodic particle locations redistribution in the present approach is still handled by MLS interpolants. With the proposed FPM technique, problems associated with the free surface flow around a ship are circumvented. A verification of numerical modeling is made using the Wigley hull and the validity of the proposed methodology is examined by comparing the detail of wave profile and wave-making resistance with Series 60 model. The results demonstrate that FPM is able to perform efficient and stable simulations of free surface flow around a ship.     

Effects of built environment and weather on bike sharing demand: a station level analysis of commercial bike sharing in Toronto

Bike Share Toronto is Canada’s second largest public bike share system. It provides a unique case study as it is one of the few bike share programs located in a relatively cold North American setting, yet operates throughout the entire year. Using year-round historical trip data, this study analyzes the factors affecting Toronto’s bike share ridership. A comprehensive spatial analysis provides meaningful insights on the influences of socio-demographic attributes, land use and built environment, as well as different weather measures on bike share ridership. Empirical models also reveal significant effects of road network configuration (intersection density and spatial dispersion of stations) on bike sharing demands. The effect of bike infrastructure (bike lane, paths etc.) is also found to be crucial in increasing bike sharing demand. Temporal changes in bike share trip making behavior were also investigated using a multilevel framework. The study reveals a significant correlation between temperature, land use and bike share trip activity. The findings of the paper can be translated to guidelines with the aim of increasing bike share activity in urban centers.