Characteristics of operating mode distributions of light duty vehicles by road type,average speed,and driver type for estimating on-road emissions: Case study of Beijing

Abstract

Researchers have collected extensive vehicle activity data in Beijing using GPS and attempted to develop a comprehensive database of facility- and speed-specific operating mode (OpMode) distributions of various vehicle types for estimating on-road vehicle emissions. This study developed the specific OpMode distributions of light duty vehicles (LDVs) for both restricted access and unrestricted access road types at various average speeds for characteristic analysis. (1) Strong patterns are found in the variations in OpMode distributions with the increase in the average speed: the time fraction of Decelerating/Braking remains less than 7%. The fraction of Idling decreases dramatically from 95% to 0%, while the fraction of Cruising/Accelerating increases from 2% to 94%. The fraction of Coasting increases to 28% and then decreases. (2) The time fractions for restricted access and unrestricted access are significantly different at the same average speeds, especially in Operating Modes #0, #1, #11, #12, #13, #14, #21, and #22, possibly causing an error of 20% in the emissions estimations. (3) Taxis show different OpMode distributions than those for private cars in the operating modes of Decelerating/Braking, Idling, and high-VSP modes, especially at low average speeds. The differences are derived from the more skillful driving behaviors of taxi drivers and may cause an estimation error of over 10%. Thus, the activities of taxis and private cars should be modeled separately for on-road emissions estimations.     

电控发动机喷油控制MAP的建模与仿真

在求解进气压力及发动机循环喷油量时运用了数学模型算法。通过改建发动机试验台架、采用试验和参数模型相结合的方法,建立了初始喷油脉宽数学模型。仿真计算得到发动机电控喷射系统的初始MAP图,其结果与国产汽油发动机的台架试验结果基本一致。     

提高电流放大器电流响应速度的研究

提出采用超前校正和负反馈校正提高电流放大器输出电流响应速度方法。分析了电流放大器结构和采用输出电流反馈的工作原理，指出感性负载的时间常数是影响电流响应速度的主要因素。研究采用超前校正和负反馈校正减小负载等效时间常数的基本原理。建立了电流放大器的仿真模型，采用DSP和智能功率模块（IPM）搭建了H桥式电流放大器及其控制电路和控制软件。阶跃指令和复合指令的仿真和试验表明，两种方法均提高了输出电流的响应速度，满足快速跟随电流指令要求。     

Pressure-Based Approach to Estimating the Injection Start and End in Single and Split Common Rail Injection Processes

The deep understanding on sand and sand dunes scale can be useful to reveal the formation mechanism of the sandstorm for early sandstorm forecast. The current sandstorm observation methods are mainly based on conventional meteorological station and satellites remote sensing, which are difficult to acquire sand scale information. A wireless sensing network is implemented in the hinterland of desert, which includes ad hoc network, sensor, global positioning system (GPS) and system integration technology. The wireless network is a three-layer architecture and daisy chain topology network, which consists of control station, master robots and slave robots. Every three robots including one master robot and its two slave robots forms an ad hoc network. Master robots directly communicate with radio base station. Information will be sent to remote information center. Data sensing system including different kinds of sensors and desert robots is developed. A desert robot is designed and implemented as unmanned probing movable nodes and sensors’ carrier. A new optical fiber sensor is exploited to measure vibration of sand in particular. The whole system, which is delivered to the testing field in hinterland of desert (25 km far from base station), has been proved efficient for data acquisition.     

以规范的管理方式和创新的工作思路建立海上搜救应急管理体系

“以最快捷的方式获取最准确的信息情报，以最科学的决策制定最完善的施救方案，以最有效的手段配备最精干的搜救力量，以最满意的社会效果回馈最关切的社会期待。”这是交通部副部长徐祖远对中国海上搜救中心提出的工作方法和目标，同时也是广大涉海人民群众对交通部海上搜救工作的切实需要。     

Study on lateral dynamic characteristics of vehicle/turnout system

Based on Chinese No. 12 high speed, single-way swing nose rail concrete sleeper turnout, a comprehensive vehicle/turnout system coupling dynamic model has been established in this paper, and the lateral and vertical dynamic characteristics of vehicle/turnout systems have been simulated while the car passes through the turnout zone on divergence. These dynamic characteristics show that the lateral impact and vibration of the systems caused by the wheel/rail contact and irregularity are very intensive, especially at the switch zone and nose area of the turnout, and the lateral dynamics of the turnout system, such as lateral stability, vibrating responses, impacting and the allowable passing velocity force between the wheelsets and the switch rails are much more complicated than that of the vertical ones.     

高速铁路接触网振动特性分析

简要介绍了法国、德国及日本高速铁路受电弓和接触网结构。建立了各类接触网的欧拉梁－集中质量模型及受电弓的框架模型，开发了其数值模拟软件。应用此软件分析了简单链形悬挂、弹性链形悬挂以及双链形悬挂的振动特性，并进行了相互间的比较分析。     

NET平台下水晶报表的应用

水晶报表是一款优秀的报表开发工具,简单、易用和功能强大,使得在开发信息管理系统时报表的开发变得很方便,本文介绍了在.NET平台下水晶报表在企业信息管理系统中的开发实例。     

地基土抗剪强度与极限平衡条件的评价分析

在确定地基土的抗剪强度的基础上 ,运用材料力学中平面应力状态的理论对无粘性土和粘性土均进行了极限平衡条件的评价分析 ,运用该分析方法进行工程实例计算 ,计算结果表明该方法较准确、可靠。     

葫芦河特大桥承台大体积混凝土温度监测与裂缝控制

分析葫芦河特大桥承台大体积混凝土温度监测结果,介绍裂缝控制技术。监测结果反映了大体积混凝土温度变化规律,可供类似工程施工借鉴