光纤光栅传感器在分布式测量系统中的应用

介绍了光纤光栅传感器在分布式测量系统中的应用，给出了光纤光栅测量节点的软硬件实现，并对实时性等影响分布式系统性能的因素做出了分析，最后，对于完善方案提出了构想。     

谈船舶载运散装有毒液体物质进出港口的审批管理

阐述了船舶载运散装有毒液体物质进出港口审批管理制度的重要作用,介绍了申报审批的一般程序,剖析了工作实践中存在的问题和薄弱环节,提出了有针对性的改进建议。     

城市轨道交通车辆部件故障与均衡修修程周期

简要分析了目前采用的城市轨道交通车辆维修制度及修程的不足,引出均衡修概念。基于概率统计分析,结合车门等车辆零部件的故障间隔时间特点,提出确定均衡修修程周期的方法,指出均衡修策略的技术特征。实施均衡修应以部件为维修单元。分析表明,采用均衡修将减少零部件故障,提升车辆运用可靠性。     

基于关系数据库的抽象查询

抽象查询是数据库应用系统中的一种程序设计方法。该方法为数据库应用系统查询使用者提供了一个比较良好的、全面直观的数据聚集查询调配。模糊了使用者对数据库应用系统的专业性限制，并为用户掌握和了解数据内容、数据关联顺序起到了一个得力的助手作用。使用二叉树原理是建立数据库的抽象查询的数学模型依据，二叉树算法能够使应用系统开发人员建立直观的E-R关系数据结构，并为数据库的扩展奠定了可靠的关系基本数据模型，使抽象查询有一个较完整的基础数据。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

IN SITU EXPRESSION OF THE CELL ADHESION MOLECULE IN GASTRIC CARCINOMA AND CHRONIC GASTRITIS

ＩＮＳＩＴＵＥＸＰＲＥＳＳＩＯＮＯＦＴＨＥＣＥＬＬＡＤＨＥＳＩＯＮＭＯＬＥＣＵＬＥＩＮＧＡＳＴＲＩＣＣＡＲＣＩＮＯＭＡＡＮＤＣＨＲＯＮＩＣＧＡＳＴＲＩＴＩＳＣｈｅｎＧａｏｐｉｎｇ（陈高平）；ＬｉｕＹｏｎｇ（刘勇）；ＲｅｎＨｕｉｍｉ（任惠民）；ＬｉＨｅ...     

模拟异种钢接头蠕变力学特性的数值分析

利用有限元数值模拟了高强匹配异种的接头在弹性－蠕变条件下的应力／应变场，结果表明，接头的应力／应变分布不均匀，在焊缝界面上，应力和应变分别呈不连续和不协调分布特性，并随着拦头各区蠕变强度差别的增大，其分布梯度增大，峰值应力／应变提高，因此，蠕变强度梯度大的高强焊缝和低强母材的界面是接头的薄弱部位。     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

Maritime accident investigation and temporal determinants of maritime accidents: A case study

This paper presents the results of an investigation into temporal determinants of maritime accidents based on a data-set obtained from the proceedings of formal inquiries in the former German Democratic Republic (GDR). The results show that there is no statistically significant outcome between the probability for an accident and the time of watch. Thus the results do not confirm previous studies, which reported significant time of day effects.The outcome of this study indicates that marine inquiries can provide useful data for an analysis of underlying causes of maritime accidents. It is suggested that accident inquiries should be extended into the area of watch systems employed and should record the hours of work and of rest of the officers on the watch involved in a maritime accident.