Structural Optimization for Roof Crush Test Using an Enforced Displacement Method

A roof crush test has been utilized to reduce passengers’ injuries from a vehicle rollover. The Federal Motor Vehicle Safety Standards (FMVSS) 216 and the Insurance Institute for Highway Safety (IIHS) perform actual vehicle tests and evaluate the vehicle’s ratings. Nonlinear dynamic response structural optimization can be employed not only for achievement of a high rating but also minimization of the weight. However, the technique needs a huge computation time and cost because many nonlinear dynamic response analyses are required in the time domain. A novel method is proposed for nonlinear dynamic response structural optimization regarding the roof crush test. The process of the proposed method repeats the analysis domain and the design domain until the convergence criteria are satisfied. In the analysis domain, the roof crush test is simulated using a high fidelity model of nonlinear dynamic finite element analysis. In the design domain, a low fidelity model of linear static response structural optimization is utilized with enforced displacements that come from the analysis domain. Correction factors are employed to compensate the differences between a nonlinear dynamic analysis response and a linear static analysis response with enforced displacement. A full-scale vehicle problem is optimized with a constraint on the rigid wall force from the analysis in the design domain.     

Requirement-based testing of an automotive ECU considering the behavior of the vehicle

HILS (Hardware In the Loop Simulation) and RBT (Requirement-Based Testing) are widely used to evaluate the performance and reliability of automotive ECUs (Electronic Control Units). The HILS method is used to predict the behavior of ECU-installed vehicles and to evaluate the performance of ECU controllers. RBT evaluates whether the embedded system satisfies the pre-defined requirements. In this study, the behavior of a vehicle is regarded as a system requirement, and an embedded system test procedure that evaluates the system requirement is proposed. In particular, a new method is introduced, which integrates HILS with RBT. Using the proposed method, the behavior of an articulated vehicle equipped with an AWS (All Wheel Steering) ECU is evaluated with RBT software.     

Reducing the memory footprint of OSEK-based systems via stack sharing and light-weight ready queues

OSEK OS (Offene Systeme und deren Schnittstellen für die Elektronik in Kraftfahrzeugen Operating System) is an open, real-time operating system standard for ECU software in vehicles. Because it was originally designed to be used in an extremely resource-constrained environment, an OSEK-compliant operating system must incur low processing overhead and memory usage. Unfortunately, as OSEK OS has evolved over time, it now specifies nontrivial kernel features along with multiple conformance classes and application modes. This may lead to unwanted dynamic resource usage in a system using OSEK OS unless the standard is carefully interpreted and designed into an OSEK OS implementation. In this paper, we analyzed the various kernel features of OSEK OS and their interactions to identify areas in the standard that warrant further resource usage optimization. In particular, we attempted to reduce the run-time memory footprint. Based on our analyses, we present two kernel mechanisms: (1) stack sharing among tasks and (2) light-weight ready queue handling specialized for OSEK OS conformance classes. We also offer implementation methods for the proposed mechanisms by extending OIL and associated tools. Finally, we show the effectiveness of the proposed mechanisms via extensive experiments. Our mechanisms allow OSEK-based systems to use only 36% of the memory requirements of conventional OSEK-based systems on average.     

隧道断层开挖引起的地下水系统变化分析

在岩层中开挖隧道时以及开挖后,地下水会倒灌进隧道中.利用SEEP/W程序,对倒灌进隧道的地下水的水量及水位变化进行了二维有限元分析.研究对象是位于韩国Gyeongnam市Cheonseong山区的Wonhyo隧道,隧道模型范围内既有湿地,也有断裂带,选取了隧道沿途的4个典型区域进行研究.通过DFN模型计算了岩层中的导水...     

Robust optimization for emergency logistics planning: Risk mitigation in humanitarian relief supply chains

This paper proposes a methodology to generate a robust logistics plan that can mitigate demand uncertainty in humanitarian relief supply chains. More specifically, we apply robust optimization (RO) for dynamically assigning emergency response and evacuation traffic flow problems with time dependent demand uncertainty. This paper studies a Cell Transmission Model (CTM) based system optimum dynamic traffic assignment model. We adopt a min–max criterion and apply an extension of the RO method adjusted to dynamic optimization problems, an affinely adjustable robust counterpart (AARC) approach. Simulation experiments show that the AARC solution provides excellent results when compared to deterministic solution and sampling based stochastic programming solution. General insights of RO and transportation that may have wider applicability in humanitarian relief supply chains are provided.     

Analyzing the time frame for the transition from leisure-cyclist to commuter-cyclist

A recent survey reported that many commuter-cyclists had enjoyed leisure bicycling on a regular basis prior to becoming a commuter-cyclist. While bicycling for leisure, it is assumed that they considered various factors that led them to consider becoming commuter-cyclists. This study began with the question of how long it would take for a leisure-cyclist to become a commuter-cyclist, and it focused on the time that elapsed between leisure-cyclists transitioning to commuter-cycling. In order to analyze the time frame, it was hypothesized that the probability that a leisure-cyclist would become a commuter-cyclist at a certain time would be conditional on the duration that elapsed from the onset of leisure cycling till that time, which represents the “snowballing” or “inertial” dynamics of duration. A robust methodology, which is known as the “hazard model,” was adopted to accommodate such characteristics of a time period. In addition, various external covariates such as individual-specific characteristics, variables associated with the current or previous commuting mode, supply variables regarding bicycle facilities, and individual latent propensities were adopted to account for the duration of changes that would be generally applicable. As a result, many useful results were derived that could be used in fomenting policies to promote cycling to work. It was found that government should invest in establishing segregated lanes for leisure- and commuter-cyclists. It also turned out that a long distance to work hinders a leisure-cyclist from progressing to commuter-cycling. According to the results, young white-collar workers who live in high-rise apartments and enjoy intensive leisure-cycling in groups, are a good target toward whom promotions for commuter-cycling should be focused. However, an unfortunate development was that, when compared with car-commuters, it was found that transit-commuters are more likely to become commuter-cyclists.     

Actively translating a rear diffuser device for the aerodynamic drag reduction of a passenger car

This research aims to develop an actively translating rear diffuser device to reduce the aerodynamic drag experienced by passenger cars. One of the features of the device is that it is ordinarily hidden under the rear bumper but slips out backward only under high-speed driving conditions. In this study, a movable arc-shaped semi-diffuser device, round in form, is designed to maintain the streamlined automobile??s rear underbody configuration. The device is installed in the rear bumper section of a passenger car. Seven types of rear diffuser devices whose positions and protrusive lengths and widths are different (with the basic shape being identical) were installed, and Computational Fluid Dynamics (CFD) analyses were performed under moving ground and rotating wheel conditions. The main purpose of this study is to explain the aerodynamic drag reduction mechanism of a passenger car cruising at high speed via an actively translating rear diffuser device. The base pressure of the passenger car is increased by deploying the rear diffuser device, which then prevents the low-pressure air coming through the underbody from directly soaring up to the rear surface of the trunk. At the same time, the device generates a diffusing process that lowers the velocity but raises the pressure of the underbody flow, bringing about aerodynamic drag reduction. Finally, the automobile??s aerodynamic drag is reduced by an average of more than 4%, which helps to improve the constant speed fuel efficiency by approximately 2% at a range of driving speeds exceeding 70 km/h.     

Driver recognition of a run-over accident

If a driver passes over a pedestrian lying on the road and flees, it is considered a crime. In several cases, even if the driver fled and was arrested, he/she often asserts that they did not know that the victim was a human being. However, the investigation agency often believes that a driver can certainly recognize when he/she passes over a person. Accordingly, such cases frequently lead to disputes due to the lack of criteria for recognizing when a driver was involved in run-over accidents. In this study, tests were conducted both to identify if drivers can recognize whether their vehicles passed over a person and to examine how they feel at the time. A silicon dummy, which was manufactured to have the same characteristic as the human chest, was used in this study. According to the method specified in ISO2631, the vibration delivered to the driver was measured, and eighteen participants drove a vehicle over the silicon dummy to experience how the vibrations felt. When the passenger car for the test ran over the dummy at speeds ranging from 10 km/h to 60 km/h, all participants recognized the delivered vibration, and the VDV that was delivered to the participants ranged from 1.81 m/s ^1.75 to 2.38 m/s ^1.75. The participants thought that the object they drove over was a stone or a piece of wood. This indicates that the driver certainly can recognize the vibrations generated from passing over a human chest even though it feels like a solid object.     

A novel adaptive algorithm with an IIR filter and a variable step size for active noise control in a short duct

The intake system in an automotive engine has a short duct compared with that of the exhaust system. The filtered-x LMS (FX-LMS) algorithm has been applied to the active noise control (ANC) system in a short acoustic duct. This algorithm design is based on the FIR (finite impulse response) filter; however, it has a slow convergence issue due to a large number of zero coefficients. To improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct because the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filtered-u LMS algorithm (FU-LMS) based on the infinite impulse response (IIR) is developed to consider backward acoustic propagation. Generally, this algorithm has a stability problem. The stability issue was improved using an error-smoothing filter. In this paper, the recursive LMS algorithm with a variable step size and smoothing error filter is designed. This recursive LMS algorithm, the FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct, such as the intake system of an automotive engine. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal, which has a variable instantaneous frequency. The test results demonstrate that the FU-VSSLMS algorithm has a superior convergence performance when compared with the FX-LMS and FX-LMS algorithms. The algorithm can be successfully applied to the ANC system in a short duct, such as the intake duct.     

Development of an Operability Evaluation Framework for Remotely Controlled Ground Combat Vehicles in a Simulated Environment

This paper proposes a systematic framework for operability evaluation of remotely controlled ground combat systems (RGCS) in a simulated environment. The popular human-robot interaction metric used in unmanned vehicle systems is called fan-out (FO) and represents the maximum number of robots/vehicles that could be controlled by a single human operator. However, FO is inappropriate for systems with a lower level of automation where vehicles are remotely controlled by a human, such as RGCS. The theoretical background of the suggested framework is based on McRuer’s crossover model that was initially developed in the aviation domain for explaining pilot handling issues. In this study, an evaluation/analysis software prototype was developed, known as the RGCS operability evaluation tool in a simulated environment (ROPES). The ROPES was designed to be a simple tool for use by officers or researchers who only have intuitive understanding on the human adaptability. The ROPES includes two sub-modules; 1) an interactive interface for the configuration of the RGCS dynamic parameters and user interfaces and 2) a time-varying graphical display of system and human performance. Examples case studies demonstrate the advantage of the ROPES, and improvement points were identified for future development.