Nonlinear Robust Control of Torque Converter Clutch Slip System for Passenger Vehicles Using Advanced Torque Estimation Algorithms

In this paper, a torque-estimation-based robust controller for passenger car torque converter clutch slip system is presented. The proposed robust controller uses only the measurements available from inexpensive sensors that are installed in current passenger vehicles for torque estimation and feedback control. A conventional full state observer along with a neural-network-based open-loop hydraulic actuator observer is designed to estimate the unknown driving load, and a neural-network-based turbine torque estimator considering the temperature of oil circulating the torque converter is developed for improved turbine torque estimation accuracy. The stability of the internal dynamics is also investigated, and the performance and robustness of the robust controller is validated by simulation studies.     

Major sources of hydrocarbon emissions in a premixed charge compression ignition engine

Although premixed charge compression ignition (PCCI) combustion engines are praised for potentially high efficiency and clean exhaust, experimental engines built to date emit more hydrocarbons (HCs) and carbon monoxide (CO) than the conventional machines. These compounds are not only strictly controlled components of the exhaust gas of road vehicles but are also an energy loss indicator. The prime objective of this study was to investigate the major sources of the HCs formed in the combustion chamber of an experimental PCCI engine in order to suggest some effective technologies for HC reduction. In this study, to explore the dominant sources of HC emissions in both operation modes, a single cylinder engine was prepared such that it could operate using either conventional diesel combustion or PCCI combustion. Specifically, the contributions of the top-ring crevice volume in the combustion chamber and the bulk quenching of the lean mixture were investigated. To understand the influence of the shape and magnitude of the crevice on HC emissions, the engine was operated with 12 specially prepared pistons with different top-ring crevices installed one after another. The engine emitted proportionally more HCs as the depth of the crevice increased as long as the width remained narrower than the prevailing quench distance. The top-ring-crevice-originated exhaust HCs comprised approximately 31% of the total HC emissions in the baseline condition. In a series of tests to estimate the effects of bulk quench on exhaust HC emissions, intake air was heated from 300K to 400K in steps of 25K. With the intake air heated, HC and CO emissions decreased with a gradually diminishing rate to zero at 375K. In conclusion, the most dominant sources of HC emissions in PCCI engines were the crevice volumes in the combustion chamber and the bulk quenching of the lean mixtures. The key methods for reducing HC emissions in PCCI engines are minimizing crevice volume in the combustion chamber and maximizing intake air temperature allowed based on the permissible NOx level.     

Aerodynamic design optimization of rear body shapes of a sedan for drag reduction

This study proposes an aerodynamically optimized outer shape of a sedan by using an Artificial Neural Network (ANN), which focused on modifying the rear body shapes of the sedan. To determine the optimization variables, the unsteady flow field around the sedan driving at very fast speeds was analyzed by CFD simulation, and fluctuations of the drag coefficient (C _D ) and pressure around the car were calculated. After consideration of the baseline result of CFD, 6 local parts from the end of the sedan were chosen as the design variables for optimization. Moreover, an ANN approximation model was established with 64 experimental points generated by the D-optimal methodology. As a result, an aerodynamically optimized shape for the rear end of the sedan in which the aerodynamic performance is improved by about 5.64% when compared to the baseline vehicle is proposed. Finally, it is expected that within the accepted range of shape modifications for a rear body, the aerodynamic performance of a sedan can be enhanced so that the fuel efficiency of the sedan can be improved. The YF SONATA, a sedan manufactured by Hyundai Motors Corporate, played a major role in this research as the baseline vehicle.     

A self-powering system based on tire deformation during driving

Tire intelligence is vital in the improvement of the safety of vehicles because the tire supports the car body and is the contact point between the vehicle and the road. To create an intelligent tire, sensors must be installed to measure the behavior of the tire. However, it is difficult to apply a wired sensor system on the wheel of the tire. Hence, it is necessary to implement a self-powering, wireless system (a type of energy harvesting system) that can be mounted inside the tire. The purpose of this study is to convert the strain energy caused by deformation of the tire while driving into useful electrical energy to supply the sensor system. A flexible piezofiber is utilized for the energy conversion. The variation in strain, due to changes in speed, load, and the internal pressure of the tire, was measured along two axial directions to evaluate the amount of available strain energy. The amount of strain changed from 0.15% to 0.8%. To predict the amount of available energy from a tire, we perform an analysis of the relationship between the strain and the voltage. In addition, experiments for impedance matching between piezofiber and related circuits were conducted to optimize the external loads for transferring energy efficiently. Based on the procedure mentioned above, at least 0.58 mJ of electrical energy can be generated by using the laterally oriented strain (1500 to 2500 micro strain). The result of this study is expected to enhance the potential realization of self-generating wireless sensor systems for so-called ??intelligent?? tires.     

Are millennials more multimodal? A latent-class cluster analysis with attitudes and preferences among millennial and Generation X commuters in California

Transportation - Millennials tend to use a variety of travel modes more often than older birth cohorts. Two potential explanations for this phenomenon prevail in the literature. According to the...     

层状边坡渐进破裂与失稳过程数值模拟探讨

运用岩石破裂与失稳过程分析RFPA^2D系统，以含层理弱层边坡的渐进破裂与失稳分析为例，通过对边坡渐进破裂与失稳发生孕育机制及其锚固控制规律的数值模拟，数值模拟再现了含层理弱层和锚固边坡渐进破坏与失稳的发生、发展过程，模拟结果表明，复杂结构边坡的渐进破坏与失稳现象是一些简单机理的演化结果。     

Clamping performance of fastener in windshield wiper assembly using theoretical and experimental methods

Improper clamping of wiper arms can cause problems in the operation of the wiper. An excessive clamping force can cause damage to the wiper arm head. On the other hand, an insufficient clamping force can cause self-loosening of the nut. Given the lack of direct research on the clamping force of the fastener in wiper assembly, this study verifies the existing clamping performance of the fastener in windshield wiper assembly by theoretical and experimental methods. The theoretical calculation results show that all the clamping performance are satisfied under the general snow load condition. However, under the critical load condition, maximum assembly preload and safety margin against slipping are in disagreement with the standard values. This problem is solved by increasing the strength grade of the bolt. The experimental results show a reducing tendency of the clamping force during the snow durability test. However, this reducing clamping force during the 60,000 test cycles is acceptable. In the case of nut reusing more than two times possibly cause a problem of its loosening because of insufficient clamping force. Therefore, it is recommended that the nut should not be reused more than two times.     

Resource-aware integration of AUTOSAR-compliant ECUs with an empirical wcet prediction model

This paper presents an integration method of AUTOSAR-compliant ECUs which can evaluate resource constraints in an early-stage of development. There are three types of resources for an ECU (timing, memory, and interface) which should be carefully managed for successful ECU integration. The proposed method consists of three steps: measurement, prediction, and evaluation. In the first step, a method to measure resource factors for AUTOSAR-compliant software architecture is introduced. Based on the method, a worst-case execution cycle of a runnable, memory section usages of a software component, and interface of legacy ECUs can be obtained. In the second step, the obtained factors are quantitatively predicted according to the architectural designs of the integration ECU. In the case of the timing resource, the worst-case execution time of the integration ECU can be precisely predicted by a proposed empirical model. In the last step, the resource constraints such as CPU, memory, network utilizations can be evaluated with predicted resource factors before implementation. The proposed method was applied to the integration of an in-house engine management system composed of two ECUs. The method successfully provided quantitative measures to evaluate architectural designs of three different integration scenarios.     

Experimental study on piston- and sloshing- mode moonpool resonances

An experimental study was performed on the piston- and sloshing-mode moonpool resonances of offshore structures. Two different geometries were considered to investigate the flow characteristics in a plain moonpool and a moonpool with a cofferdam. To examine the efficiency of a cofferdam for reducing the flow in a moonpool, three cofferdam geometries were tested. The plain moonpool presented violent flows as a result of the piston- and sloshing-mode resonances. However, the moonpool with the cofferdam introduced violent sloshing waves instead of the ascent and descent of the water column in the piston-mode moonpool resonance. Among three different cofferdam geometries, the model with a right triangle facing to the left on the top of the cofferdam was most effective in reducing the flow in the moonpool when compared with the other models.     

A new efficient EDI system for container cargo logistics

There have been many efforts to develop a logistics information system in the Korean logistics industry. In spite of these efforts, there are many points which need improvement in the Logistics Information System, of which function is the electronic data communication without added value. This paper aims to describe some of the main problems and the successful factors which are being found in the evolution of the present EDI systems for clearing import/export container cargoes, with special reference to Singapore, Korea, and Japan. Following this, leaving legal issues aside, to suggest workable guidelines for designing a new efficient EDI system for container cargo logistics. As a result of the review, the following successful factors are drawn: (a) the planning, requirement analysis and design of EDI are critical, as it provides a framework for its implementation; (b) as the data of customs clearance are an integral part of a logistics EDI system, the inclusion of customs in the system design is essential; (c) the sharing system of cargo data as the framework of the logistics EDI is efficient for data interchange; (d) the EDI software for the user has been developed and provided by an EDI network operating company; and (e) to facilitate communication between trading partners and the transport sector, it is necessary to adopt a global message standard, such as EDIFACT.