Hydrodynamics of a body floating in a two-layer fluid of finite depth. Part 1. Radiation problem

A linearized 2-D radiation problem was considered for a general floating body in a two-layer fluid of finite depth. A boundary integral-equation method was developed for directly computing the velocity potential on the wetted surface of a body which is immersed in both the upper and lower layers as a general case. To do this, appropriate time-harmonic Greens functions were derived, and an efficient numerical method of evaluating those functions is proposed. Based on Greens theorem, hydrodynamic relations such as the energy-conservation principle were derived theoretically for a case of finite depth, and we confirm that those relations are satisfied numerically with very good accuracy. Experiments were also carried out using water and isoparaffin oil as the two fluids and a Lewis-form body. Measured results for the added mass, the damping coefficient, and the amplitude of the generated waves are compared with the computed results, and a favorable agreement is found.     

Contributors to this issue

Contributors to this issue     

对标国际营商环境评价构建城市公交KPI考核体系

立足为优化国际营商环境贡献城市公交之智、发挥城市公交之力,以考核城市公交企业绩效目标为研究视角.本文在国内外研究基础之上,结合现行国家行业规范标准及实地调研结果,对标国际营商环境内涵特征构建城市公交KPI考核体系,并引入熵值法、层次分析法综合计算城市公交KPI考核指标权重,找出公交行业的关键事项或活动,为城市公交发展提供事前预防、事中控制和事后治理的科学决策参考,以提升城市公交运营管理效率和服务质量水平.     

船船水动力相互作用的CFD分析研究（英文）

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

From broken windows to a renovated research agenda: A review of the literature on vandalism and graffiti in the rail industry

The execution of vandalism and graffiti on rail property has a significant impact on rail authorities, the patronisation of rail services, expenditure, and the timely operation of services. There are also important social costs which stem from passengers feeling unsafe, not to mention the environmental costs of removing graffiti and repairing vandalism. In this review paper, we focus on the social, non-technical determinants of and deterrents to vandalism and graffiti in the rail industry. First, we consider the definitions of graffiti and vandalism that are often conflated. After providing some clarification on terminology, and proposing a media-centred approach to vandalism and graffiti, we consider various theorisations of the psychosocial determinants of vandalism and graffiti behaviour. We then turn to an empirical discussion of different technical and social, non-technical prevention programmes that have been trialled. With a focus on identifying what works and under what circumstances, we refer to international case studies of successful vandalism reduction initiatives from Europe, the United Kingdom, the United States of America and Australia. Based on a review of literature and practice, we outline a future research agenda to address vandalism and graffiti. We recommend lines of further research covering: theory, empirical data collection and practical initiatives. Specifically, we note the need for a trans-theoretical model of vandalism and graffiti, further ethnographic research and improved evaluation and benchmarking strategies. This is the first review dedicated to the topic of vandalism and graffiti in the rail industry and the first review of non-technical, social deterrents to vandalism and graffiti broadly.     

Aesthetic markets and a new automated people mover

Research literature suggests that aesthetic response toward a transportation system may be colored by non-aesthetic values. Photographic depictions of downtown street scenes with and without automated people mover guideways were shown to various community groups. Measures of external utilities—stakes in the local community and in public transportation—bore no relationship to aesthetic assessments of either guideway scenes or street scenes without a guideway. In contrast, aesthetic background and interests depressed evaluations of both guideway and non-guideway scenes. Aesthetic background evidently influences aesthetic assessments of elevated guideways in urban streets far more than do non-aesthetic utilities. This suggests that planners of new transportation systems need to address aesthetic impacts apart from other impacts and that aesthetic criteria will be applied more stringently by some community groups than by others.     

What determines transit energy use?

A comparison of the energy use per passenger-mile of eight modes of urban transportation is made in terms of eleven variables, resulting in conclusions about the direction transit system design should take to provide adequate transportation with minimum energy use. The method can easily be programmed on a personal computer to be used to study the effects of parameter variations on energy use.     

Control of personal rapid transit systems

The problem of precise longitudinal control of vehicles so that they follow predetermined time-varying speeds and positions has been solved. To control vehicles to the required close headway of at least 0.5 sec, the control philosophy is different from but no less rigorous than that of railroad practice. The preferred control strategy is one that could be called an “asynchronous point follower.” Such a strategy requires no clock synchronization, is flexible in all unusual conditions, permits the maximum possible throughput, requires a minimum of maneuvering and uses a minimum of software. Since wayside zone controllers have in their memory exactly the same maneuver equations as the on-board computers, accurate safety monitoring is practical. The paper discusses the functions of vehicle control; the control of station, merge, and diverge zones; and central control.     

Energy consumption,pollutant production,and dollar costs of diesel suburban commuter trains

The results presented in this report are based on data obtained from Chicago's three largest diesel commuter railroads. Those aspects of their operations that relate to energy and pollution are described. Service characteristics, such as average occupancy and average trip distance, are presented. Energy consumption results are presented and discussed. With energy efficiency measured in passenger-miles per Btu, it is found that trips by diesel commuter train are 3.5 times more energy efficient than Chicago Central Area auto trips. The total trip from home to suburban station, then by train to a downtown terminal, is found to be 2.2 times more energy efficient than Chicago Central Area auto trips. Pollutant production rates are presented for five pollutants. For every pollutant except sulfur oxides, trains are found to be less polluting per passenger-mile than autos. Per passenger-mile pollutant emissions from trains are, overall, less damaging by a factor of 5.5 than the per passenger-mile emissions from autos. Travel on these diesel commuter trains is less costly to society than auto travel (1972 suburban-based autos). This is the case whether one compares the train trip alone with an auto trip or the home-to-suburb an-station-tlien-to-a-downtown-terminal trip with a home-to-downtown auto trip.     

New routes on old railways: increasing rail’s mode share within the constraints of the existing railway network

This paper describes an integrated methodology for identifying potential ‘quick wins’ for mode shift from road to passenger rail transport. Firstly, a procedure for analysing rail’s relative competitiveness in the market for passenger transport between large urban areas is developed and then applied to a UK case study. The purpose of such analysis is to allow the identification of flows where rail is currently relatively uncompetitive (in terms of journey time in particular) and to assess the reasons for this poor performance, so that the issues which suppress rail use may be addressed. In parallel, a framework, methodology and tool for the assessment of existing and potential capacity (trains, seats, TEUs, etc.) is developed for both passenger and freight traffic, to identify and address network constraints. An illustrative example of the use of these demand and capacity assessment tools is then presented, with the tools used to identify and evaluate flows where rail demand is suppressed by poor service quality and where spare capacity exists which would allow the passenger rail service to be improved without requiring significant investments in infrastructure. The effects of such improvements on demand are predicted, and the cost implications of operating such additional services are discussed. The analysis suggests that there may be significant potential for increasing rail’s mode share by providing additional inter-urban services where rail currently offers an inferior service.