Review of Secure Communication Approaches for In-Vehicle Network

In the connected vehicles, connecting interfaces bring threats to the vehicles and they can be hacked to impact the vehicles and drivers. Compared with traditional vehicles, connected vehicles require more information transfer. Sensor signals and critical data must be protected to ensure the cyber security of connected vehicles. The communications among ECUs, sensors, and gateways are connected by in-vehicle networks. This paper discussed the state-of-art techniques about secure communication for in-vehicle networks. First, the related concepts in automotive secure communication have been provided. Then we have compared and contrasted existing approaches for secure communication. We have analyzed the advantages/disadvantages of MAC and digital signatures for message authentication and compared the performance and limitations of different cryptographic algorithms. Firewall and intrusion detection system are introduced to protect the networks. The constraints and features of different intrusion detection approaches are presented. After that, the technical requirements for cryptographic mechanism and intrusion detection policy are concluded. Based on the review of current researches, the future development directions of the automotive network security have been discussed. The purpose of this paper is to review current techniques on automotive secure communication and suggest suitable secure approaches to implement on the in-vehicle networks.     

Are millennials more multimodal? A latent-class cluster analysis with attitudes and preferences among millennial and Generation X commuters in California

Transportation - Millennials tend to use a variety of travel modes more often than older birth cohorts. Two potential explanations for this phenomenon prevail in the literature. According to the...     

铁路隧道穿越岩溶群区施工控制技术研究

文章以渝(重庆)怀(怀化)铁路板桃隧道为工程背景,阐述了该隧道穿越DK215+650～DK216+105段岩溶群区的施工技术.为确保施工工期,施工中采取了"先绕行后处理"的原则,设置施工迂回导洞绕行岩溶区,并通过横通道与正线相连.针对岩溶区内不同的溶洞类型分别采取跨越、支顶、锚喷支护、浆砌片石回填等技术措施,同时根据暗河与溶洞内的水流大小及流向采取了诸如涵洞、小桥等设施或开凿泄水洞将水排出洞外,安全稳妥地通过了455 m岩溶群区.本工程取得的经验可供类似工程施工中借鉴.     

齐岳山隧道施工中物探与钻探的应用比较研究

在岩溶山区隧道工程的施工过程中,地质超前预报是重要的施工工序,以宜万铁路齐岳山隧道为例,研究了基于地震波理论的TSP203探测设备的应用方法和目前在国内外水平钻探领域功能最完善的RPD-150多功能地质钻机的应用方法;分析比较了地球物理探测和地质钻探方法在隧道地质超前预报中的特点,提出了岩溶山区隧道地质超前预报技术方法的应用原则.研究结果表明:TSP203地质预报系统探测、解译距离远,分辨率高,系统智能化程度高,数据记录基本采用自动记录系统,试验过程简单,对施工影响较小,但是整个系统数据记录与分析比较单一、公式化;RPD-150C多功能钻机系统具有探测准确、探测结果受外界影响小等优点,但是数据分析往往不能对有些数据和图形进行量化,只能作出定性的分析.从而得出结论,RPD-150C多功能钻机系统与TSP203地质预报系统有很大的互补性,综合两种手段,可以及时预测预报到大部分地质不良地段,为隧道工程的施工奠定基础.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

清管器在输油管道中的运动规律研究

在分析清管物理模型的基础上,建立了清管器前段塞流动的特征参数计算模型、动态数学模型以及相应的数值计算方法,并进行了数值模拟。利用数学模拟方法可以计算清管过程中管线的压力分布,利用压力分布可以跟踪清管球在管线内的运行,这为混输管路的运行管理提供了理论依据。     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于C8051F020单片机的T型管自动焊接机控制系统

为了提高T型管的焊接质量和效率,设计了一台用C8051F020单片机自动控制的焊接设备。同时采用C8051F020的12位A／D转换功能实现对焊接系统中加工参数的实时检测。该自动焊接系统在钢制散热器管道焊接生产应用中取得了良好的效果,是一种低成本、自动化的T型焊缝专用焊接设备。     

Examining the influence of multidestination service orientation on transit service productivity: a multivariate analysis

Between 1990 and 2000, U.S. transit agencies added service and increased ridership, but the ridership increase failed to keep pace with the service increase. The result was a decline in service effectiveness (or productivity). This marks the continuation of a long-running and often-studied trend. The scholarly literature attributes this phenomenon, at least in part, to transit agency decisions to decentralize their service rather than focus on serving the traditional CBD market. Many scholars argue that a decentralized service orientation is both ineffective and inefficient because it attracts few riders and requires large per-rider subsidies. This research tests whether a non-traditional, decentralized service orientation, called multidestination service, results in reduced service productivity. Contrary to what the literature suggests, we find that MSAs whose transit agencies pursued a multidestination service orientation did not experience lower productivity. These results indicate that policies that have encouraged the growth of decentralized transit services have not necessarily been detrimental to the industry.

TTB or not TTB, that is the question: a review and analysis of the empirical literature on travel time (and money) budgets

This paper summarizes and analyses findings from more than two dozen aggregate and disaggregate studies of travel time (and sometimes money) expenditures, exploring the question of the existence of a constant travel time budget. We conclude (with prior researchers) that travel time expenditures are not constant except, perhaps, at the most aggregate level. Nevertheless, individuals’ travel time expenditures do show patterns that can be partly explained by measurable characteristics. Travel time expenditure is strongly related to individual and household characteristics (e.g., income level, gender, employment status, and car ownership), attributes of activities at the destination (e.g., activity group and activity duration), and characteristics of residential areas (e.g., density, spatial structure, and level of service). To the extent that travel time expenditures are constant at the aggregate level, the underlying mechanisms explaining that regularity are not well understood. Consequently, further research into explaining travel time and money expenditure patterns is justified.