Response spectrum method for extreme wave loading with higher order components of drag force

Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass attached to a light cantilever cylinder and their corresponding deformation response spectra are estimated by utilizing a generalized single degree of freedom system. Based on the wave data recorded in the Persian Gulf region, extreme wave loading conditions corresponding to different return periods are exerted on the offshore structures. Accordingly, the effect of the higher order components of the drag force is considered and compared to the linearized state for different sea surface levels. When the fundamental period of the offshore structure is about one third of the main period of wave loading, the results indicate the linearized drag term is not capable of achieving a reliable deformation response spectrum.     

Existence,relatedness and growth needs as mediators between mode choice and travel satisfaction: evidence from Denmark

Transportation - Understanding the link between mode choice and travel satisfaction is essential for promoting sustainable travel by expanding utility theory to include also the eudaimonic value of...     

Uncertainty in predictions of oil spill trajectories in a coastal zone

A method is introduced to determine the uncertainties in the predictions of oil spill trajectories using a classic oil spill model. The method considers the output of the oil spill model as a function of random variables, which are the input parameters, and calculates the standard deviation of the output results which provides a measure of the uncertainty of the model as a result of the uncertainties of the input parameters.In addition to a single trajectory that is calculated by the oil spill model using the mean values of the parameters, a band of trajectories can be defined when various simulations are done taking into account the uncertainties of the input parameters. This band of trajectories defines envelopes of the trajectories that are likely to be followed by the spill given the uncertainties of the input.The method was applied to an oil spill that occurred in 1989 near Sines in the southwestern coast of Portugal. This model represented well the distinction between a wind driven part that remained offshore, and a tide driven part that went ashore. For both parts, the method defined two trajectory envelopes, one calculated exclusively with the wind fields, and the other using wind and tidal currents. In both cases reasonable approximation to the observed results was obtained.The envelope of likely trajectories that is obtained with the uncertainty modelling proved to give a better interpretation of the trajectories that were simulated by the oil spill model.     

Benthic megafauna communities under the influence of the South Atlantic Central Water intrusion onto the Brazilian SE shelf: A comparison between an upwelling and a non-upwelling ecosystem

The structure and dynamics of the benthic invertebrate megafauna of the Southeastern Brazilian shelf were studied over a 2-year period. Two regions presenting different oceanographic conditions, Ubatuba-SP and Cabo Frio-RJ were compared in terms of biomass, density of organisms and species richness. Two to three 30-min tows were undertaken at each of the stations, located at 40 and 100 m isobath, in a normal transect offshore of both regions. Faunal distributional patterns correlated with water mass dynamics, depth and sediment parameters. In the Cabo Frio region, subjected to a Ekman-driven seasonal coastal upwelling, the impact of the South Atlantic Central Water (SACW) on the inner shelf leads to a change in the benthic communities, with a high dominance of top carnivores such as the crab Portunus spinicarpus and the sea-star Astropecten brasiliensis, which accounted for the larger part of the total biomass. Distinct species associations were found in each of the two regions and the total biomass at Cabo Frio inner shelf was almost twice that of Ubatuba during the 2002 summer, when a marked upwelling was verified. The relationship between megabenthic biomass and input of organic matter to the sea floor during upwelling events is discussed.     

Economic conditions for minibus usage in a multimodal feeder network

The introduction of minibuses into the transit fleets of some cities makes it more important than ever to investigate the economic and operating conditions of these vehicles for various transit and paratransit services. A high performance transit system is of great interest, owing to its desirable characteristics. However, it is not feasible to establish and use such a system all over a city. It is therefore necessary to support a high performance transit system with other modes to extend its area of operation (owing to higher demand) and also to connect those areas that are not covered by the high performance system to it. This paper considers the use of minibuses in the design of metro line feeders and to characterize the economic domain in which it is efficient to use them in a feeder network. Based on results from ant colony optimization, the performance measures of minibuses are compared with those of conventional buses to help make decision makers aware of the use and role of these vehicles. The study contradicts the common belief that, since minibuses require similar driver costs to those of conventional buses, it is not economical to use them in a transit fleet; in fact, it is shown that minibuses can displace conventional buses in some situations in a feeder network.     

Geometric stress distribution along the weld toe of the outer brace in two-planar tubular DKT-joints: Parametric study and deriving the SCF design equations

Regarding the research efforts expended so far on the calculation of stress concentration factors (SCFs) in tubular joints, two major shortcomings can be noted: (a) significant effort has been devoted to the study of SCFs in various uni-planar connections. Nevertheless, for multi-planar joints which cover the majority of practical applications, very few investigations have been reported due to the complexity and high cost involved; (b) majority of these research works focused on the study of SCFs at certain positions such as the saddle, crown toe, and crown heel, and they have ignored the hot-spot stress (HSS) at other positions along the weld toe. In the present paper, effects of dimensionless geometrical parameters on the SCF distribution along the weld toe of main (outer) braces in the axially loaded right-angle two-planar tubular DKT-joints are investigated. In order to study the multi-planar effect, SCF distribution in two-planar joints is compared with the distribution in a uni-planar joint having the same geometrical properties. A complete set of SCF database is constructed based on the two-planar DKT-joint Finite element models which are verified against experimental results and the predictions of Lloyd’s Register (LR) equations. The FE models cover a wide range of geometrical parameters. Six new SCF parametric formulae are developed through nonlinear regression analyses for the accurate and reliable fatigue design of two-planar DKT-joints under axial loads. An assessment study of these equations is conducted against the experimental data, the original FEM database and the acceptance criteria recommended by the UK Department of Energy.     

Marine Protected Area Management Effectiveness: Progress and Lessons in the Philippines

Quantifying progress in management of marine protected areas (MPAs) is crucial to marine conservation and fisheries management in the Philippines. This study compiles data on the status, occurrence, and management gaps of MPAs through coordination with multiple organizations supporting and guiding MPAs in the Philippines. MPA management effectiveness was measured using a MPA Rating System. Since 2002 the modal MPA rating levels increased from level 1 (initiated) to level 4 (sustained) in 2008/9. This upward trend is attributed to factors that promoted both the establishment and improved management of MPAs. Analysis indicated that: (1) most MPAs struggle with budgetary constraints or lack of sustainable financing and (2) overall the MPAs are being maintained and progressing with notable improvement in management despite a range of difficulties encountered during the implementation process. For MPAs in the Visayan Region for which biophysical data were available, the MPA Rating System was used to assess the effectiveness of local government capacity building on MPA coral reef health. Our results suggest that MPAs with higher ratings are likely to have better reef health conditions.     

电弧喷涂工艺参数对3Cr13涂层性能稳定性的影响

采用正交设计方法研究了电弧喷涂工艺参数对 3Cr13涂层结合强度和耐磨性的影响。试验结果表明 :影响涂层性能稳定性的工艺参数主要是电弧电流 ,其次是喷涂距离。按涂层结合强度和按磨损失重确定的空气压力与电弧电压两个因素的主次排列顺序不同。当电弧电流一定时 ,喷涂距离过大或过小都不利于涂层性能的稳定性 ,且喷涂距离和空气压力为反向组合时涂层性能稳定性最差。涂层中的孔隙率和氧化物的数量是造成涂层性能变化波动的主要原因 ,采用较大的电弧电流可减少涂层中的孔隙率和氧化物数量 ,有利于涂层的致密性增强 ,涂层强度高 ,耐磨性也好。