Marginal cost pricing of ferry transportation: a practical application ∗

In this paper, in which the author attempts to redress the lack of attention by economists to ferry operation, a simple pricing model, based on marginal cost pricing, is developed.     

Commentaries

Abstract

This paper surveys the technologies available for constructing a pervasive, national‐scale road pricing system. It defines the different types of road pricing, the methods by which a vehicle’s position can be determined, and then examines possible pricing regimes in the context of their technological requirements and implications. The issue of enforcement and the distribution of pricing policies are considered, and further complexities are outlined. An examination of the security aspects of such systems is made, focusing particularly on the need to ensure privacy using technological, rather than solely procedural, methods. The survey concludes that a pervasive, national‐scale deployment is unlikely to be technically achievable in the short‐term.     

Understanding Recreational Boater Attitudes to Zoning in a Proposed Marine Protected Area

Although the success of marine protected areas (MPAs) and associated zoning schemes is largely dependent on stakeholder acceptance and support, there have been relatively few studies examining the response of recreational stakeholders to MPA proposals. This study investigates the response of recreational boaters to a proposed MPA in British Columbia, Canada. Using a structured questionnaire (n = 543) and a focus group (n = 6), the research examines the level of support for the concept of marine zoning and identifies key factors influencing support or opposition. Results indicate that a small majority of recreational boaters support the concept of marine zoning, but that there are areas of concern that ought to be addressed as MPA implementation proceeds. Support for zoning was strongly related to perceived benefits, particularly environmental benefits. Furthermore, perceived benefits overall were found to outweigh concerns as determinants of recreational boater support for zoning. Major dimensions of opposition included perceptions of over-regulation, loss of access for boating, and mistrust of the government. A suggestion is that such concerns may be mitigated through focused communication and meaningful involvement of boaters in the zoning process.     

In situ colonization of marine biofilms on UNS S32760 duplex stainless steel coupons in areas with different water qualities: Implications for corrosion potential behavior

In the presence of biofilms, stainless steels （SS） exhibits an increase in corrosion potential, called ennoblement. In the present study, the corrosion potential （Eco,） behavior of the duplex SS UNS S32760 was recorded simultaneously with the in situ marine biofilm formation in two areas at Arraial do Cabo, Southeastern Brazil. The biofilm at Forno Harbor （an anthropogenically disturbed area） was characterized by higher relative abundances of Bacteria at day 2, followed by diatoms （especially Navicula sp.） on day 10 and dinoflagellates on day 18, whereas no clear trend was recorded at Cabo Frio Island （an undisturbed area）. The ennoblement of Ecor values was site-dependent. In a complementary laboratory assay, biofilms were removed and the Eco values registered in sterile conditions for the subsequent 10 days and corroborated in situ results. Understanding biofilms and SS interactions has important implications for materials science and engineering decisions as well as helping to fill in imnortant gaps in this knowledge.     

Industrial water dependency: The BCDC experience

The Bay Conservation and Development Commission (BCDC), has designated a number of shoreline sites around San Francisco Bay for exclusive use of water‐related industry. This is intended both to reduce future needs for Bay fill, and to reserve those waterfront sites needed for long‐term industrial growth. The Commission currently defines water‐related industries as those “requiring”; a shoreline site for water transportation. The Commission is now considering the use of an economic criterion for identifying water dependency. This involves comparisons of the uniquely water‐related benefits and costs to the firm to locate on the shoreline, as opposed to its location at an inland site. By limiting use of deepwater sites to those industries that are significantly water‐dependent under this criterion, long‐term economic efficiency is served, and the need for future Bay fill for industrial growth is reduced. The data and analysis required to implement an economic water‐dependency criterion do not appear to be a barrier to use of such a test in the regulatory process. Whereas water dependency is an important concern to BCDC, other factors, including environmental constraints, must also be weighed when evaluating industrial projects.     

Estimates of vertical mixing during a Lagrangian experiment off the Galician coast

An adjoint 1-D model was used to determine vertical diffusivity coefficients from temperature profiles collected within a filament escaping from the Galician coast following an upwelling event. The optimisation scheme ended with relatively high diffusivity values within the thermocline (9×10⁻⁵ m² s⁻¹). Such high values are relevant for biogeochemical exchanges between surface and deep waters in stratified areas.The optimised values were several orders of magnitude higher than the bulk of diffusivity measurements recorded with a free-falling device; however, the optimisation solution was consistent with the arithmetic mean of the measurements in the thermocline (7.7×10⁻⁵ m² s⁻¹), giving more weight to the few largest values. Below the thermocline, the data assimilation method failed because of the three-dimensional nature of the advective field of the upwelling system. Ignoring this advective forcing in the model led to estimates that were two orders of magnitude too high.The results suggest that turbulent mixing is a random process where a few intense events determine the average mixing that drives the long-term evolution of the water column structure. This statistical property is very important when one wants to use instantaneous diffusivity measurements for modelling purposes.     

Multi-objective optimization of quarter-car models with a passive or semi-active suspension system

A systematic methodology is applied in an effort to select optimum values for the suspension damping and stiffness parameters of two degrees of freedom quarter-car models, subjected to road excitation. First, models involving passive suspension dampers with constant or dual rate characteristics are considered. In addition, models with semi-active suspensions are also examined. Moreover, special emphasis is put in modeling possible temporary separations of the wheel from the ground. For all these models, appropriate methodologies are employed for capturing the motions of the vehicle resulting from passing with a constant horizontal speed over roads involving an isolated or a distributed geometric irregularity. The optimization process is based on three suitable performance criteria, related to ride comfort, suspension travel and road holding of the vehicle and yielding the most important suspension stiffness and damping parameters. As these criteria are conflicting, a suitable multi-objective optimization methodology is set up and applied. As a result, a series of diagrams with typical numerical results are presented and compared in both the corresponding objective spaces (in the form of classical Pareto fronts) and parameter spaces.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

An algorithm for finding reasonable paths in transit networks

In this paper, reasonable paths in transit networks are defined as possible paths that satisfy the acceptable time criterion and transfer‐walk criterion. A recursive algorithm for finding all of the reasonable paths in a transit network that does not involve a rapid increase in program run‐time with network size is presented. Realistic transit networks in Hong Kong and Guangzhou were selected as case studies of the different phases of the development of a trip planning system. Transport planning practitioners and potential users were invited to test the system to evaluate its performance. The results of the prototype evaluation were satisfactory, and the viability of the system as a useful tool for supporting decision‐making has been confirmed by the positive feedback that was obtained from survey questionnaires.     

An analysis of the determinants of children’s weekend physical activity participation

This paper examines the out-of-home, weekend, time-use patterns of children aged 5–17 years, with a specific emphasis on their physical activity participation. The impact of several types of factors, including individual and household demographics, neighborhood demographics, built environment characteristics, and activity day variables, on physical activity participation is analyzed using a joint nested multiple discrete–continuous extreme value-binary choice model. The sample for analysis is drawn from the 2000 San Francisco Bay Area Travel Survey. The model developed in the paper can be used to assess the impacts of changing demographics and built environment characteristics on children’s physical activity levels.