A Novel Optimal Routing for Navigation Systems/Services Based on Global Navigation Satellite System Quality of Service

The positioning quality of global navigation satellite system (GNSS), or GNSS quality of service (QoS), is a major factor impacting real-time navigation performance. Commonly requested routes (i.e., shortest or fastest) may include areas with poor GNSS QoS, which can subsequently degrade navigation performance. To provide alternative routes with high or acceptable GNSS QoS along a route, a novel optimal routing for navigation systems/services based on GNSS QoS by utilizing integrated GNSS (iGNSS) QoS prediction is presented in this article. New routing criteria based on GNSS QoS are maximum availability, maximum accuracy, maximum continuity, and maximum reliability. Two experiments were conducted to compare GNSS QoS-based routes against shortest routes. In one experiment, routes were simulated, and in another, generated routes based on GNSS QoS were evaluated against GPS-based trajectories as ground truths. The results show that GNSS QoS-based routes provide routes with higher QoS, more than 50%, and longer, about 50%, than shortest routes.     

Bridge sampling for evaluating structural impact of trucks

In this paper, a method for designing a statistically valid sample of bridges is proposed. The need for such a sampling procedure arises from the impracticality of a detailed analysis of the structural effects of new candidate truck configurations on the whole bridge inventory. In this study, a set of bridges from the national inventory was determined for the purpose of selecting a bridge sample. This set of bridges is referred to as the population. The selection of bridges for inclusion in the population was based on the status of the bridge, type of service, structural material, structural system type and functional class. The stratified sampling method was used in the determination of the required sample sizes. According to this method, the population was first divided into sub-populations, or strata. These sub-populations were non-overlapping. In turn, each strata was divided into sub-strata. The characteristics of each sub-stratum were estimated and combined to determine the characterics of the strata. Then the characteristics of the strata were combined to determine the characteristics of the bridge population. A comparison of the results based on the sample and bridge population was conducted in order to verify the validity of the proposed sampling procedure.     

Exciting forces for a wave energy device consisting of a pair of coaxial cylinders in water of finite depth

Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by these two cylinders,which were considered as idealization of a buoy and a circular plate,can be considered as a wave energy device.The wave energy that is created and transferred by this device can be appropriately used in many applications in lieu of conventional energy.Method of separation of variables was used to obtain the analytical expressions for the diffracted potentials in four clearly identified regions.By applying the appropriate matching conditions along the three virtual boundaries between the regions,a system of linear equations was obtained,which was solved for the unknown coefficients.The potentials allowed us to obtain the exciting forces acting on both cylinders.Sets of exciting forces were obtained for different radii of the cylinders and for different gaps between the cylinders.It was observed that changes in radius and the gap had significant effect on the forces.It was found that mostly the exciting forces were significant only at lower frequencies.The exciting forces almost vanished at higher frequencies.The problem was also investigated for the base case of no plate arrangement,i.e.,the case having only the floating cylinder tethered to the sea-bed.Comparison of forces for both arrangements was carried out.In order to take care of the radiation of the cylinders due to surge motion,the corresponding added mass and the damping coefficients for both cylinders were also computed.All the results were depicted graphically and compared with available results.     

A weight-based map-matching algorithm for vehicle navigation in complex urban networks

A map-matching algorithm is an integral part of every navigation system and reconciles raw and inaccurate positional data (usually from a global positioning system [GPS]) with digital road network data. Since both performance (speed) and accuracy are equally important in real-time map-matching, an accurate and efficient map-matching algorithm is presented in this article. The proposed algorithm has three steps: initialization, same-segment, and next-segment. Distance between the GPS point and road segments, difference between the heading of the GPS point and direction of road segments, and difference between the direction of consecutive GPS points and direction of road segments are used to identify the best segment among candidates near intersections. In contrast to constant weights applied in existing algorithms, the weight of each criterion in this algorithm is dynamic. The weights of criteria are calculated for each GPS point based on its: (a) positional accuracy, (b) speed, and (c) traveled distance from previous GPS point. The algorithm considers a confidence level on the assigned segment to each GPS point, which is calculated based on the density and complexity of roads around the GPS point. The evaluation results indicate 95.34% correct segment identification and 92.19% correct segment assignment. The most important feature of our algorithm is that the high correct segment identification percentage achieved in urban areas is through a simple and efficient weight-based method that does not depend on any additional data or positioning sensors other than digital road network and GPS.     

Surrogate‐based optimization of cordon toll levels in congested traffic networks

The benefit, in terms of social surplus, from introducing congestion charging schemes in urban networks is depending on the design of the charging scheme. The literature on optimal design of congestion pricing schemes is to a large extent based on static traffic assignment, which is known for its deficiency in correctly predict travel times in networks with severe congestion. Dynamic traffic assignment can better predict travel times in a road network, but are more computational expensive. Thus, previously developed methods for the static case cannot be applied straightforward. Surrogate‐based optimization is commonly used for optimization problems with expensive‐to‐evaluate objective functions. In this paper, we evaluate the performance of a surrogate‐based optimization method, when the number of pricing schemes, which we can afford to evaluate (because of the computational time), are limited to between 20 and 40. A static traffic assignment model of Stockholm is used for evaluating a large number of different configurations of the surrogate‐based optimization method. Final evaluation is performed with the dynamic traffic assignment tool VisumDUE, coupled with the demand model Regent, for a Stockholm network including 1240 demand zones and 17 000 links. Our results show that the surrogate‐based optimization method can indeed be used for designing a congestion charging scheme, which return a high social surplus. Copyright © 2016 John Wiley & Sons, Ltd.     

Experimental Investigation of a Hydraulic Turbine for Hydrokinetic Power Generation in Irrigation/Rainfall Channels

The development of microchannels with open flow for use in irrigation and rainy areas is challenged by electricity generation via hydrokinetic devices in shallo...